Re: [PATCH V3 2/4] leds: Add pm8350c support to Qualcomm LPG driver

[Bjorn Andersson <bjorn.andersson@linaro.org>]

On Fri 29 Oct 04:44 PDT 2021, Satya Priya wrote:

> From: satya priya <skakit@codeaurora.org>
> 
> Add pm8350c compatible and lpg_data to the driver.
> 
> Signed-off-by: satya priya <skakit@codeaurora.org>

Sorry for the OCD, but I would really like for you to capitalize 's' and
'p' in your name.

> Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
> ---
> Changes in V2:
>  - Added const for lpg_channel_data[] struct.
> 
> Changes in V3:
>  - Correct the num_channels and add respective base addresses.
> 
>  drivers/leds/rgb/leds-qcom-lpg.c | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/drivers/leds/rgb/leds-qcom-lpg.c b/drivers/leds/rgb/leds-qcom-lpg.c
> index 45ef4ec..ad99a9b 100644
> --- a/drivers/leds/rgb/leds-qcom-lpg.c
> +++ b/drivers/leds/rgb/leds-qcom-lpg.c
> @@ -1275,9 +1275,22 @@ static const struct lpg_data pm8150l_lpg_data = {
>  	},
>  };
>  
> +static const struct lpg_data pm8350c_pwm_data = {
> +	.pwm_9bit_mask = BIT(2),

As you might have seen in v12 I dropped pwm_9bit_mask.

> +

Afaict there's a tri-channel current sink in pm8350c as well, so you
should have:

        .triled_base = 0xef00,

And then associated .triled_mask in the relevant channels.

Regards,
Bjorn

> +	.num_channels = 4,
> +	.channels = (const struct lpg_channel_data[]) {
> +		{ .base = 0xe800 },
> +		{ .base = 0xe900 },
> +		{ .base = 0xea00 },
> +		{ .base = 0xeb00 },
> +	},
> +};
> +
>  static const struct of_device_id lpg_of_table[] = {
>  	{ .compatible = "qcom,pm8150b-lpg", .data = &pm8150b_lpg_data },
>  	{ .compatible = "qcom,pm8150l-lpg", .data = &pm8150l_lpg_data },
> +	{ .compatible = "qcom,pm8350c-pwm", .data = &pm8350c_pwm_data },
>  	{ .compatible = "qcom,pm8916-pwm", .data = &pm8916_pwm_data },
>  	{ .compatible = "qcom,pm8941-lpg", .data = &pm8941_lpg_data },
>  	{ .compatible = "qcom,pm8994-lpg", .data = &pm8994_lpg_data },
> -- 
> 2.7.4
>