Linux-ARM-MSM Archive on lore.kernel.org
 help / color / Atom feed
From: Amit Kucheria <amit.kucheria@linaro.org>
To: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	bjorn.andersson@linaro.org, edubezval@gmail.com,
	andy.gross@linaro.org, Daniel Lezcano <daniel.lezcano@linaro.org>,
	David Brown <david.brown@linaro.org>,
	Zhang Rui <rui.zhang@intel.com>
Cc: devicetree@vger.kernel.org
Subject: [PATCHv3 22/23] arm64: dts: qcom: qcs404: Add thermal zones for each sensor
Date: Wed, 20 Mar 2019 18:48:02 +0530
Message-ID: <a9819b3b2e2736c1f97b7d1e00decfdd83e2eb07.1553086065.git.amit.kucheria@linaro.org> (raw)
In-Reply-To: <cover.1553086065.git.amit.kucheria@linaro.org>
In-Reply-To: <cover.1553086065.git.amit.kucheria@linaro.org>

qcs404 has 10 sensors connected to the single TSENS IP. Define a thermal
zone for each of those sensors to expose the temperature of each zone.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
 arch/arm64/boot/dts/qcom/qcs404.dtsi | 252 +++++++++++++++++++++++++++
 1 file changed, 252 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index 7881792980b8..2423c816b98d 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -4,6 +4,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-qcs404.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	interrupt-parent = <&intc>;
@@ -31,6 +32,7 @@
 			reg = <0x100>;
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
+			#cooling-cells= <2>;
 		};
 
 		CPU1: cpu@101 {
@@ -39,6 +41,7 @@
 			reg = <0x101>;
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
+			#cooling-cells= <2>;
 		};
 
 		CPU2: cpu@102 {
@@ -47,6 +50,7 @@
 			reg = <0x102>;
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
+			#cooling-cells= <2>;
 		};
 
 		CPU3: cpu@103 {
@@ -55,6 +59,7 @@
 			reg = <0x103>;
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
+			#cooling-cells= <2>;
 		};
 
 		L2_0: l2-cache {
@@ -866,4 +871,251 @@
 			#interrupt-cells = <2>;
 		};
 	};
+
+	thermal-zones {
+		aoss-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 0>;
+
+			trips {
+				aoss_alert0: trip-point@0 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		q6-hvx-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 1>;
+
+			trips {
+				q6_hvx_alert0: trip-point@0 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		lpass-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 2>;
+
+			trips {
+				lpass_alert0: trip-point@0 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		wlan-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 3>;
+
+			trips {
+				wlan_alert0: trip-point@0 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cluster-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 4>;
+
+			trips {
+				cluster_alert0: trip-point@0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cluster_alert1: trip-point@1 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cluster_crit: cluster_crit {
+					temperature = <120000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cluster_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 5>;
+
+			trips {
+				cpu0_alert0: trip-point@0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cpu0_alert1: trip-point@1 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu0_crit: cpu_crit {
+					temperature = <120000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 6>;
+
+			trips {
+				cpu1_alert0: trip-point@0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cpu1_alert1: trip-point@1 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu1_crit: cpu_crit {
+					temperature = <120000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 7>;
+
+			trips {
+				cpu2_alert0: trip-point@0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cpu2_alert1: trip-point@1 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu2_crit: cpu_crit {
+					temperature = <120000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 8>;
+
+			trips {
+				cpu3_alert0: trip-point@0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cpu3_alert1: trip-point@1 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu3_crit: cpu_crit {
+					temperature = <120000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu3_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 9>;
+
+			trips {
+				gpu_alert0: trip-point@0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+	};
 };
-- 
2.17.1

  parent reply index

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-20 13:17 [PATCHv3 00/23] thermal: tsens: Refactor to use regmap_field Amit Kucheria
2019-03-20 13:17 ` [PATCHv3 01/23] drivers: thermal: tsens: Document the data structures Amit Kucheria
2019-03-20 13:17 ` [PATCHv3 02/23] drivers: thermal: tsens: Rename tsens_data Amit Kucheria
2019-03-20 13:17 ` [PATCHv3 03/23] drivers: thermal: tsens: Rename tsens_device Amit Kucheria
2019-03-20 13:17 ` [PATCHv3 04/23] drivers: thermal: tsens: Rename variable tmdev Amit Kucheria
2019-03-20 13:17 ` [PATCHv3 05/23] drivers: thermal: tsens: Use consistent names for variables Amit Kucheria
2019-03-20 13:17 ` [PATCHv3 06/23] drivers: thermal: tsens: Function prototypes should have argument names Amit Kucheria
2019-03-20 13:17 ` [PATCHv3 07/23] drivers: thermal: tsens: Rename tsens-8916 to prepare to merge with tsens-8974 Amit Kucheria
2019-03-20 13:17 ` [PATCHv3 08/23] drivers: thermal: tsens: Rename constants " Amit Kucheria
2019-03-20 13:17 ` [PATCHv3 09/23] drivers: thermal: tsens: Merge tsens-8974 into tsens-v0_1 Amit Kucheria
2019-03-20 13:17 ` [PATCHv3 10/23] drivers: thermal: tsens: Introduce reg_fields to deal with register description Amit Kucheria
2019-03-20 13:17 ` [PATCHv3 11/23] drivers: thermal: tsens: Save reference to the device pointer and use it Amit Kucheria
2019-03-20 13:17 ` [PATCHv3 12/23] drivers: thermal: tsens: Don't print error message on -EPROBE_DEFER Amit Kucheria
2019-03-20 13:17 ` [PATCHv3 13/23] drivers: thermal: tsens: Add new operation to check if a sensor is enabled Amit Kucheria
2019-03-20 13:17 ` [PATCHv3 14/23] drivers: thermal: tsens: change data type for sensor IDs Amit Kucheria
2019-03-20 13:17 ` [PATCHv3 15/23] drivers: thermal: tsens: Introduce IP-specific max_sensor count Amit Kucheria
2019-03-20 13:17 ` [PATCHv3 16/23] drivers: thermal: tsens: simplify get_temp_tsens_v2 routine Amit Kucheria
2019-03-20 13:17 ` [PATCHv3 17/23] drivers: thermal: tsens: Move get_temp_tsens_v2 to allow sharing Amit Kucheria
2019-03-20 13:17 ` [PATCHv3 18/23] drivers: thermal: tsens: Common get_temp() learns to do ADC conversion Amit Kucheria
2019-03-20 13:17 ` [PATCHv3 19/23] dt: thermal: tsens: Add bindings for qcs404 Amit Kucheria
2019-03-20 13:18 ` [PATCHv3 20/23] drivers: thermal: tsens: Add generic support for TSENS v1 IP Amit Kucheria
2019-03-20 13:18 ` [PATCHv3 21/23] arm64: dts: qcom: qcs404: Add tsens controller Amit Kucheria
2019-06-24 10:59   ` Amit Kucheria
2019-03-20 13:18 ` Amit Kucheria [this message]
2019-03-20 13:18 ` [PATCHv3 23/23] drivers: thermal: tsens: Move calibration constants to header file Amit Kucheria

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=a9819b3b2e2736c1f97b7d1e00decfdd83e2eb07.1553086065.git.amit.kucheria@linaro.org \
    --to=amit.kucheria@linaro.org \
    --cc=andy.gross@linaro.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=daniel.lezcano@linaro.org \
    --cc=david.brown@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=edubezval@gmail.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rui.zhang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-MSM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-msm/0 linux-arm-msm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-msm linux-arm-msm/ https://lore.kernel.org/linux-arm-msm \
		linux-arm-msm@vger.kernel.org
	public-inbox-index linux-arm-msm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-arm-msm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git