linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jonathan McDowell <noodles@earth.li>
To: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Ansuel Smith <ansuelsmth@gmail.com>,
	Vinod Koul <vkoul@kernel.org>,
	linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v2 3/5] ARM: dts: qcom: Add USB port definitions to ipq806x
Date: Thu, 20 May 2021 18:30:00 +0100	[thread overview]
Message-ID: <ad2121defc539abdb339b23eef80a8930b5f086e.1621531633.git.noodles@earth.li> (raw)
In-Reply-To: <cover.1621531633.git.noodles@earth.li>

Signed-off-by: Jonathan McDowell <noodles@earth.li>
---
 arch/arm/boot/dts/qcom-ipq8064.dtsi | 88 +++++++++++++++++++++++++++++
 1 file changed, 88 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 9628092217cb..c66859abdfd5 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -1026,6 +1026,94 @@
 			status = "disabled";
 		};
 
+		hs_phy_0: hs_phy_0 {
+			compatible = "qcom,ipq806x-usb-phy-hs";
+			reg = <0x100f8800 0x30>;
+			clocks = <&gcc USB30_0_UTMI_CLK>;
+			clock-names = "ref";
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		ss_phy_0: ss_phy_0 {
+			compatible = "qcom,ipq806x-usb-phy-ss";
+			reg = <0x100f8830 0x30>;
+			clocks = <&gcc USB30_0_MASTER_CLK>;
+			clock-names = "ref";
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb3_0: usb3@100f8800 {
+			compatible = "qcom,dwc3", "syscon";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x100f8800 0x8000>;
+			clocks = <&gcc USB30_0_MASTER_CLK>;
+			clock-names = "core";
+
+			ranges;
+
+			resets = <&gcc USB30_0_MASTER_RESET>;
+			reset-names = "master";
+
+			status = "disabled";
+
+			dwc3_0: dwc3@10000000 {
+				compatible = "snps,dwc3";
+				reg = <0x10000000 0xcd00>;
+				interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&hs_phy_0>, <&ss_phy_0>;
+				phy-names = "usb2-phy", "usb3-phy";
+				dr_mode = "host";
+				snps,dis_u3_susphy_quirk;
+			};
+		};
+
+		hs_phy_1: hs_phy_1 {
+			compatible = "qcom,ipq806x-usb-phy-hs";
+			reg = <0x110f8800 0x30>;
+			clocks = <&gcc USB30_1_UTMI_CLK>;
+			clock-names = "ref";
+			#phy-cells = <0>;
+		};
+
+		ss_phy_1: ss_phy_1 {
+			compatible = "qcom,ipq806x-usb-phy-ss";
+			reg = <0x110f8830 0x30>;
+			clocks = <&gcc USB30_1_MASTER_CLK>;
+			clock-names = "ref";
+			#phy-cells = <0>;
+		};
+
+		usb3_1: usb3@110f8800 {
+			compatible = "qcom,dwc3", "syscon";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x110f8800 0x8000>;
+			clocks = <&gcc USB30_1_MASTER_CLK>;
+			clock-names = "core";
+
+			ranges;
+
+			resets = <&gcc USB30_1_MASTER_RESET>;
+			reset-names = "master";
+
+			status = "disabled";
+
+			dwc3_1: dwc3@11000000 {
+				compatible = "snps,dwc3";
+				reg = <0x11000000 0xcd00>;
+				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&hs_phy_1>, <&ss_phy_1>;
+				phy-names = "usb2-phy", "usb3-phy";
+				dr_mode = "host";
+				snps,dis_u3_susphy_quirk;
+			};
+		};
+
 		vsdcc_fixed: vsdcc-regulator {
 			compatible = "regulator-fixed";
 			regulator-name = "SDCC Power";
-- 
2.20.1


  parent reply	other threads:[~2021-05-20 17:30 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-15 16:52 [PATCH 0/5] ARM: dts: qcom: Enable various devices for IPQ806x / RB3011 Jonathan McDowell
2021-05-15 16:52 ` [PATCH 1/5] ARM: dts: qcom: Add ADM DMA + NAND definitions to ipq806x Jonathan McDowell
2021-05-17  9:40   ` Vinod Koul
2021-05-19 10:29     ` Jonathan McDowell
2021-05-15 16:52 ` [PATCH 2/5] ARM: dts: qcom: Add tsens details " Jonathan McDowell
2021-05-17  9:42   ` Vinod Koul
2021-05-19 11:00     ` Jonathan McDowell
2021-05-15 16:52 ` [PATCH 3/5] ARM: dts: qcom: Add USB port definitions " Jonathan McDowell
2021-05-15 16:53 ` [PATCH 4/5] ARM: dts: qcom: add L2CC and RPM for IPQ8064 Jonathan McDowell
2021-05-15 16:53 ` [PATCH 5/5] ARM: dts: qcom: Enable NAND + USB for RB3011 Jonathan McDowell
2021-05-20 17:29 ` [PATCH v2 0/5] ARM: dts: qcom: Enable various devices for IPQ806x / RB3011 Jonathan McDowell
2021-05-20 17:29   ` [PATCH v2 1/5] ARM: dts: qcom: Add ADM DMA + NAND definitions to ipq806x Jonathan McDowell
2021-05-20 17:29   ` [PATCH v2 2/5] ARM: dts: qcom: Add tsens details " Jonathan McDowell
2021-05-20 17:30   ` Jonathan McDowell [this message]
2021-05-31 15:58     ` [PATCH v2 3/5] ARM: dts: qcom: Add USB port definitions " Bjorn Andersson
2021-05-20 17:30   ` [PATCH v2 4/5] ARM: dts: qcom: add L2CC and RPM for IPQ8064 Jonathan McDowell
2021-05-20 17:30   ` [PATCH v2 5/5] ARM: dts: qcom: Enable NAND + USB for RB3011 Jonathan McDowell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ad2121defc539abdb339b23eef80a8930b5f086e.1621531633.git.noodles@earth.li \
    --to=noodles@earth.li \
    --cc=agross@kernel.org \
    --cc=ansuelsmth@gmail.com \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=vkoul@kernel.org \
    --subject='Re: [PATCH v2 3/5] ARM: dts: qcom: Add USB port definitions to ipq806x' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).