From: Harish Bandi <c-hbandi@codeaurora.org>
To: Bjorn Andersson <bjorn.andersson@linaro.org>,
Balakrishna Godavarthi <bgodavar@codeaurora.org>
Cc: Marcel Holtmann <marcel@holtmann.org>,
Johan Hedberg <johan.hedberg@gmail.com>,
linux-bluetooth@vger.kernel.org, linux-kernel@vger.kernel.org,
Jeffrey Hugo <jeffrey.l.hugo@gmail.com>,
linux-arm-msm@vger.kernel.org,
linux-bluetooth-owner@vger.kernel.org
Subject: Re: [PATCH 3/4] Bluetooth: hci_qca: Use regulator bulk enable/disable
Date: Fri, 18 Oct 2019 16:48:50 +0530 [thread overview]
Message-ID: <bb16286d4a4afb76eb270ac5b1af3c06@codeaurora.org> (raw)
In-Reply-To: <20191018052405.3693555-4-bjorn.andersson@linaro.org>
On 2019-10-18 10:54, Bjorn Andersson wrote:
> With the regulator_set_load() and regulator_set_voltage() out of the
> enable/disable code paths the code can now use the standard
> regulator bulk enable/disable API.
>
> By cloning num_vregs into struct qca_power there's no need to lug
> around
> a reference to the struct qca_vreg_data, which further simplifies
> qca_power_setup().
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
> drivers/bluetooth/hci_qca.c | 55 +++++++++----------------------------
> 1 file changed, 13 insertions(+), 42 deletions(-)
>
> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
> index 54aafcc69d06..01f941e9adf3 100644
> --- a/drivers/bluetooth/hci_qca.c
> +++ b/drivers/bluetooth/hci_qca.c
> @@ -144,8 +144,8 @@ struct qca_vreg_data {
> */
> struct qca_power {
> struct device *dev;
> - const struct qca_vreg_data *vreg_data;
> struct regulator_bulk_data *vreg_bulk;
> + int num_vregs;
> bool vregs_on;
> };
>
> @@ -1381,63 +1381,34 @@ static int qca_power_off(struct hci_dev *hdev)
> return 0;
> }
>
> -static int qca_enable_regulator(struct qca_vreg vregs,
> - struct regulator *regulator)
> -{
> - return regulator_enable(regulator);
> -
> -}
> -
> -static void qca_disable_regulator(struct qca_vreg vregs,
> - struct regulator *regulator)
> -{
> - regulator_disable(regulator);
> -
> -}
> -
> static int qca_power_setup(struct hci_uart *hu, bool on)
> {
> - struct qca_vreg *vregs;
> struct regulator_bulk_data *vreg_bulk;
> struct qca_serdev *qcadev;
> - int i, num_vregs, ret = 0;
> + int num_vregs;
> + int ret = 0;
>
> qcadev = serdev_device_get_drvdata(hu->serdev);
> - if (!qcadev || !qcadev->bt_power || !qcadev->bt_power->vreg_data ||
> - !qcadev->bt_power->vreg_bulk)
> + if (!qcadev || !qcadev->bt_power || !qcadev->bt_power->vreg_bulk)
> return -EINVAL;
>
> - vregs = qcadev->bt_power->vreg_data->vregs;
> vreg_bulk = qcadev->bt_power->vreg_bulk;
> - num_vregs = qcadev->bt_power->vreg_data->num_vregs;
> - BT_DBG("on: %d", on);
> + num_vregs = qcadev->bt_power->num_vregs;
> + BT_DBG("on: %d (%d regulators)", on, num_vregs);
> if (on && !qcadev->bt_power->vregs_on) {
> - for (i = 0; i < num_vregs; i++) {
> - ret = qca_enable_regulator(vregs[i],
> - vreg_bulk[i].consumer);
> - if (ret)
> - break;
> - }
> + ret = regulator_bulk_enable(num_vregs, vreg_bulk);
> + if (ret)
> + return ret;
>
> - if (ret) {
> - BT_ERR("failed to enable regulator:%s", vregs[i].name);
> - /* turn off regulators which are enabled */
> - for (i = i - 1; i >= 0; i--)
> - qca_disable_regulator(vregs[i],
> - vreg_bulk[i].consumer);
> - } else {
> - qcadev->bt_power->vregs_on = true;
> - }
> + qcadev->bt_power->vregs_on = true;
> } else if (!on && qcadev->bt_power->vregs_on) {
> /* turn off regulator in reverse order */
> - i = qcadev->bt_power->vreg_data->num_vregs - 1;
> - for ( ; i >= 0; i--)
> - qca_disable_regulator(vregs[i], vreg_bulk[i].consumer);
> + regulator_bulk_disable(num_vregs, vreg_bulk);
>
> qcadev->bt_power->vregs_on = false;
> }
>
> - return ret;
> + return 0;
> }
>
> static int qca_init_regulators(struct qca_power *qca,
> @@ -1465,6 +1436,7 @@ static int qca_init_regulators(struct qca_power
> *qca,
> }
>
> qca->vreg_bulk = bulk;
> + qca->num_vregs = num_vregs;
>
> return 0;
> }
> @@ -1493,7 +1465,6 @@ static int qca_serdev_probe(struct serdev_device
> *serdev)
> return -ENOMEM;
>
> qcadev->bt_power->dev = &serdev->dev;
> - qcadev->bt_power->vreg_data = data;
> err = qca_init_regulators(qcadev->bt_power, data->vregs,
> data->num_vregs);
> if (err) {
next prev parent reply other threads:[~2019-10-18 11:19 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-18 5:24 [PATCH 0/4] Bluetooth: hci_qca: Regulator usage cleanup Bjorn Andersson
2019-10-18 5:24 ` [PATCH 1/4] Bluetooth: hci_qca: Update regulator_set_load() usage Bjorn Andersson
2019-10-18 11:18 ` Harish Bandi
2019-10-18 5:24 ` [PATCH 2/4] Bluetooth: hci_qca: Don't vote for specific voltage Bjorn Andersson
2019-10-18 11:18 ` Harish Bandi
2019-10-18 18:22 ` Matthias Kaehlcke
2019-10-21 6:37 ` Harish Bandi
2019-10-22 6:05 ` Balakrishna Godavarthi
2019-10-22 17:15 ` Matthias Kaehlcke
2019-10-30 6:18 ` Balakrishna Godavarthi
2019-10-18 5:24 ` [PATCH 3/4] Bluetooth: hci_qca: Use regulator bulk enable/disable Bjorn Andersson
2019-10-18 11:18 ` Harish Bandi [this message]
2019-10-18 5:24 ` [PATCH 4/4] Bluetooth: hci_qca: Split qca_power_setup() Bjorn Andersson
2019-10-18 11:19 ` Harish Bandi
2019-10-18 7:59 ` [PATCH 0/4] Bluetooth: hci_qca: Regulator usage cleanup Marcel Holtmann
2019-10-18 14:52 ` Jeffrey Hugo
2019-10-18 11:17 ` Harish Bandi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bb16286d4a4afb76eb270ac5b1af3c06@codeaurora.org \
--to=c-hbandi@codeaurora.org \
--cc=bgodavar@codeaurora.org \
--cc=bjorn.andersson@linaro.org \
--cc=jeffrey.l.hugo@gmail.com \
--cc=johan.hedberg@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-bluetooth-owner@vger.kernel.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel@holtmann.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).