Linux-ARM-MSM Archive on lore.kernel.org
 help / color / Atom feed
From: Asutosh Das <asutoshd@codeaurora.org>
To: Avri.Altman@wdc.com, cang@codeaurora.org,
	martin.petersen@oracle.com, linux-scsi@vger.kernel.org
Cc: Asutosh Das <asutoshd@codeaurora.org>,
	linux-arm-msm@vger.kernel.org,
	Alim Akhtar <alim.akhtar@samsung.com>,
	Avri Altman <avri.altman@wdc.com>,
	"James E.J. Bottomley" <jejb@linux.ibm.com>,
	Stanley Chu <stanley.chu@mediatek.com>,
	Bean Huo <beanhuo@micron.com>,
	Bart Van Assche <bvanassche@acm.org>,
	Venkat Gopalakrishnan <venkatg@codeaurora.org>,
	Tomas Winkler <tomas.winkler@intel.com>,
	linux-kernel@vger.kernel.org (open list)
Subject: [PATCH v2 1/3] scsi: ufshcd: Update the set frequency to devfreq
Date: Wed, 25 Mar 2020 11:29:00 -0700
Message-ID: <d0c6c22455811e9f0eda01f9bc70d1398b51b2bd.1585160616.git.asutoshd@codeaurora.org> (raw)
In-Reply-To: <cover.1585160616.git.asutoshd@codeaurora.org>
In-Reply-To: <cover.1585160616.git.asutoshd@codeaurora.org>

Currently, the frequency that devfreq provides the
driver to set always leads the clocks to be scaled up.
Hence, round the clock-rate to the nearest frequency
before deciding to scale.

Also update the devfreq statistics of current frequency.

Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
---
 drivers/scsi/ufs/ufshcd.c | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 2a2a63b..7916c8b 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -1187,6 +1187,9 @@ static int ufshcd_devfreq_target(struct device *dev,
 	if (!ufshcd_is_clkscaling_supported(hba))
 		return -EINVAL;
 
+	clki = list_first_entry(&hba->clk_list_head, struct ufs_clk_info, list);
+	/* Override with the closest supported frequency */
+	*freq = (unsigned long) clk_round_rate(clki->clk, *freq);
 	spin_lock_irqsave(hba->host->host_lock, irq_flags);
 	if (ufshcd_eh_in_progress(hba)) {
 		spin_unlock_irqrestore(hba->host->host_lock, irq_flags);
@@ -1201,8 +1204,11 @@ static int ufshcd_devfreq_target(struct device *dev,
 		goto out;
 	}
 
-	clki = list_first_entry(&hba->clk_list_head, struct ufs_clk_info, list);
+	/* Decide based on the rounded-off frequency and update */
 	scale_up = (*freq == clki->max_freq) ? true : false;
+	if (!scale_up)
+		*freq = clki->min_freq;
+	/* Update the frequency */
 	if (!ufshcd_is_devfreq_scaling_required(hba, scale_up)) {
 		spin_unlock_irqrestore(hba->host->host_lock, irq_flags);
 		ret = 0;
@@ -1250,6 +1256,8 @@ static int ufshcd_devfreq_get_dev_status(struct device *dev,
 	struct ufs_hba *hba = dev_get_drvdata(dev);
 	struct ufs_clk_scaling *scaling = &hba->clk_scaling;
 	unsigned long flags;
+	struct list_head *clk_list = &hba->clk_list_head;
+	struct ufs_clk_info *clki;
 
 	if (!ufshcd_is_clkscaling_supported(hba))
 		return -EINVAL;
@@ -1260,6 +1268,13 @@ static int ufshcd_devfreq_get_dev_status(struct device *dev,
 	if (!scaling->window_start_t)
 		goto start_window;
 
+	clki = list_first_entry(clk_list, struct ufs_clk_info, list);
+	/*
+	 * If current frequency is 0, then the ondemand governor considers
+	 * there's no initial frequency set. And it always requests to set
+	 * to max. frequency.
+	 */
+	stat->current_frequency = clki->curr_freq;
 	if (scaling->is_busy_started)
 		scaling->tot_busy_t += ktime_to_us(ktime_sub(ktime_get(),
 					scaling->busy_start_t));
-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.


  reply index

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-25 18:28 [PATCH v2 0/3] UFS Clock Scaling fixes and enhancements Asutosh Das
2020-03-25 18:29 ` Asutosh Das [this message]
2020-05-25 22:19   ` [PATCH v2 1/3] scsi: ufshcd: Update the set frequency to devfreq Jeffrey Hugo
2020-05-26 17:17     ` Asutosh Das (asd)
2020-03-25 18:29 ` [PATCH v2 2/3] scsi: ufshcd: Let vendor override devfreq parameters Asutosh Das
2020-03-25 18:29 ` [PATCH v2 3/3] scsi: ufs-qcom: Override " Asutosh Das
2020-03-25 23:18 ` [PATCH v2 0/3] UFS Clock Scaling fixes and enhancements Avri Altman
2020-03-27  2:18 ` Martin K. Petersen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=d0c6c22455811e9f0eda01f9bc70d1398b51b2bd.1585160616.git.asutoshd@codeaurora.org \
    --to=asutoshd@codeaurora.org \
    --cc=Avri.Altman@wdc.com \
    --cc=alim.akhtar@samsung.com \
    --cc=beanhuo@micron.com \
    --cc=bvanassche@acm.org \
    --cc=cang@codeaurora.org \
    --cc=jejb@linux.ibm.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=stanley.chu@mediatek.com \
    --cc=tomas.winkler@intel.com \
    --cc=venkatg@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-MSM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-msm/0 linux-arm-msm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-msm linux-arm-msm/ https://lore.kernel.org/linux-arm-msm \
		linux-arm-msm@vger.kernel.org
	public-inbox-index linux-arm-msm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-arm-msm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git