From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 56CABC61DA3 for ; Fri, 24 Feb 2023 06:58:29 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229642AbjBXG62 (ORCPT ); Fri, 24 Feb 2023 01:58:28 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:49704 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229498AbjBXG61 (ORCPT ); Fri, 24 Feb 2023 01:58:27 -0500 Received: from mx0a-0031df01.pphosted.com (mx0a-0031df01.pphosted.com [205.220.168.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 750B8410B8; Thu, 23 Feb 2023 22:58:25 -0800 (PST) Received: from pps.filterd (m0279863.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 31O2NUsO030509; Fri, 24 Feb 2023 06:58:06 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=message-id : date : mime-version : subject : to : cc : references : from : in-reply-to : content-type : content-transfer-encoding; s=qcppdkim1; bh=ExYGv7uD0WZzY2ho0BwFRS07UTaJZxj71lOvMF39JVY=; b=V4YlBVnHKYYJ22OJV2cyL1Z6lKp9M60dmCWQtloQXFegllNUw3XnlYMXOebclvhA9oIT RcZdTdy97hzk/AFiuUY/Z82xC8epjV+BNOEtC1ZQcCR08WZji6j0tz9QZTF5zOZZEkF2 +gBLPgVt/UwiFG7j2RG6qs+lVBaWVzsB94CFm52NLnDIG3pTfB8Fzs3VqydXAPh5uWeO R7ViDH7lgJJv6ouy/q0NuMpvN9wahmerPu679mGrUkWbS3u0LaQ8ofIdpNiFlINqf9Ni t/Trkl5wE2u9484Icz4MvgNw2bSWFCStCBWh6cSt10htnPwTlBEWxpdOCs+PlGP3Z5ot /w== Received: from nalasppmta04.qualcomm.com (Global_NAT1.qualcomm.com [129.46.96.20]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3nwycnkqpr-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Fri, 24 Feb 2023 06:58:05 +0000 Received: from nalasex01a.na.qualcomm.com (nalasex01a.na.qualcomm.com [10.47.209.196]) by NALASPPMTA04.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTPS id 31O6w4dX002510 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Fri, 24 Feb 2023 06:58:04 GMT Received: from [10.50.30.238] (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.41; Thu, 23 Feb 2023 22:57:55 -0800 Message-ID: Date: Fri, 24 Feb 2023 12:27:52 +0530 MIME-Version: 1.0 User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:102.0) Gecko/20100101 Thunderbird/102.7.0 Subject: Re: [PATCH 7/7] arm64: dts: qcom: ipq9574: Add PCIe PHYs and controller nodes To: Devi Priya , , , , , , , , , , , , , , , , , , , , , CC: , , , , References: <20230214164135.17039-1-quic_devipriy@quicinc.com> <20230214164135.17039-8-quic_devipriy@quicinc.com> Content-Language: en-US From: Kathiravan T In-Reply-To: <20230214164135.17039-8-quic_devipriy@quicinc.com> Content-Type: text/plain; charset="UTF-8"; format=flowed Content-Transfer-Encoding: 7bit X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01a.na.qualcomm.com (10.52.223.231) To nalasex01a.na.qualcomm.com (10.47.209.196) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-ORIG-GUID: zEjx_kquJH8OKG_6ysX1stIhuddtfRsj X-Proofpoint-GUID: zEjx_kquJH8OKG_6ysX1stIhuddtfRsj X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.219,Aquarius:18.0.930,Hydra:6.0.562,FMLib:17.11.170.22 definitions=2023-02-24_03,2023-02-23_01,2023-02-09_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 mlxscore=0 impostorscore=0 suspectscore=0 lowpriorityscore=0 phishscore=0 adultscore=0 spamscore=0 clxscore=1015 mlxlogscore=999 priorityscore=1501 malwarescore=0 bulkscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2212070000 definitions=main-2302240057 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org On 2/14/2023 10:11 PM, Devi Priya wrote: > Add PCIe0, PCIe1, PCIe2, PCIe3 (and corresponding PHY) devices > found on IPQ9574 platform. The PCIe0 & PCIe1 are 1-lane Gen3 > host whereas PCIe2 & PCIe3 are 2-lane Gen3 host. > > Co-developed-by: Anusha Rao > Signed-off-by: Anusha Rao > Signed-off-by: Devi Priya > --- > arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts | 28 ++ > arch/arm64/boot/dts/qcom/ipq9574.dtsi | 477 ++++++++++++++++++- > 2 files changed, 499 insertions(+), 6 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts b/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts > index 2c8430197ec0..21b53f34ce84 100644 > --- a/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts > +++ b/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts > @@ -8,6 +8,7 @@ > > /dts-v1/; > > +#include > #include "ipq9574.dtsi" > > / { > @@ -29,6 +30,33 @@ > status = "okay"; > }; > > +&pcie1_phy { > + status = "okay"; > +}; > + > +&pcie1_x1 { > + perst-gpios = <&tlmm 26 GPIO_ACTIVE_LOW>; > + status = "okay"; > +}; > + > +&pcie2_phy { > + status = "okay"; > +}; > + > +&pcie2_x2 { > + perst-gpios = <&tlmm 29 GPIO_ACTIVE_LOW>; > + status = "okay"; > +}; > + > +&pcie3_phy { > + status = "okay"; > +}; > + > +&pcie3_x2 { > + perst-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>; > + status = "okay"; > +}; > + > &sdhc_1 { > pinctrl-0 = <&sdc_default_state>; > pinctrl-names = "default"; > diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi > index 062f80798ebb..a32dbdeb5bed 100644 > --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi > +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi > @@ -6,8 +6,8 @@ > * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved. > */ > > -#include > #include > +#include > #include > > / { > @@ -22,11 +22,41 @@ > #clock-cells = <0>; > }; > > + pcie30_phy0_pipe_clk: pcie30_phy0_pipe_clk { > + compatible = "fixed-clock"; > + clock-frequency = <250000000>; > + #clock-cells = <0>; > + }; > + > + pcie30_phy1_pipe_clk: pcie30_phy1_pipe_clk { > + compatible = "fixed-clock"; > + clock-frequency = <250000000>; > + #clock-cells = <0>; > + }; > + > + pcie30_phy2_pipe_clk: pcie30_phy2_pipe_clk { > + compatible = "fixed-clock"; > + clock-frequency = <250000000>; > + #clock-cells = <0>; > + }; > + > + pcie30_phy3_pipe_clk: pcie30_phy3_pipe_clk { > + compatible = "fixed-clock"; > + clock-frequency = <250000000>; > + #clock-cells = <0>; > + }; > + > sleep_clk: sleep-clk { > compatible = "fixed-clock"; > #clock-cells = <0>; > }; > > + usb3phy_0_cc_pipe_clk: usb3phy_0_cc_pipe_clk { > + compatible = "fixed-clock"; > + clock-frequency = <125000000>; > + #clock-cells = <0>; > + }; > + > xo_board_clk: xo-board-clk { > compatible = "fixed-clock"; > #clock-cells = <0>; > @@ -121,6 +151,155 @@ > #size-cells = <1>; > ranges = <0 0 0 0xffffffff>; > > + pcie0_phy: phy@84000 { > + compatible = "qcom,ipq9574-qmp-gen3x1-pcie-phy"; > + reg = <0x00084000 0x1bc>; /* Serdes PLL */ > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + clocks = <&gcc GCC_PCIE0_AUX_CLK>, > + <&gcc GCC_PCIE0_AHB_CLK>, > + <&gcc GCC_ANOC_PCIE0_1LANE_M_CLK>, > + <&gcc GCC_SNOC_PCIE0_1LANE_S_CLK>; > + clock-names = "aux", "cfg_ahb", "anoc_lane", "snoc_lane"; > + > + assigned-clocks = <&gcc GCC_PCIE0_AUX_CLK>; > + assigned-clock-rates = <20000000>; > + > + resets = <&gcc GCC_PCIE0_PHY_BCR>, > + <&gcc GCC_PCIE0PHY_PHY_BCR>; > + reset-names = "phy", "common"; > + > + status = "disabled"; > + > + pcie0_lane: phy@84200 { > + reg = <0x00084200 0x16c>, /* Serdes Tx */ > + <0x00084400 0x200>, /* Serdes Rx */ > + <0x00084800 0x1f0>, /* PCS: Lane0, COM, PCIE */ > + <0x00084c00 0xf4>; /* pcs_misc */ > + #phy-cells = <0>; > + > + clocks = <&gcc GCC_PCIE0_PIPE_CLK>; > + clock-names = "pipe0"; > + clock-output-names = "gcc_pcie0_pipe_clk_src"; > + #clock-cells = <0>; > + }; > + }; > + > + pcie2_phy: phy@8c000 { > + compatible = "qcom,ipq9574-qmp-gen3x2-pcie-phy"; > + reg = <0x0008c000 0x1bc>; /* Serdes PLL */ > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + clocks = <&gcc GCC_PCIE2_AUX_CLK>, > + <&gcc GCC_PCIE2_AHB_CLK>, > + <&gcc GCC_ANOC_PCIE2_2LANE_M_CLK>, > + <&gcc GCC_SNOC_PCIE2_2LANE_S_CLK>; > + clock-names = "aux", "cfg_ahb", "anoc_lane", "snoc_lane"; > + > + assigned-clocks = <&gcc GCC_PCIE2_AUX_CLK>; > + assigned-clock-rates = <20000000>; > + > + resets = <&gcc GCC_PCIE2_PHY_BCR>, > + <&gcc GCC_PCIE2PHY_PHY_BCR>; > + reset-names = "phy", "common"; > + > + status = "disabled"; > + > + pcie2_lanes: phy@8c200 { > + reg = <0x0008c200 0x16c>, /* Serdes Tx0 */ > + <0x0008c400 0x200>, /* Serdes Rx0 */ > + <0x0008d000 0x1f0>, /* PCS: Lane0, COM, PCIE */ > + <0x0008c600 0x16c>, /* Serdes Tx1 */ > + <0x0008c800 0x200>, /* Serdes Rx1 */ > + <0x0008d400 0x0f8>; /* pcs_misc */ > + > + #phy-cells = <0>; > + > + clocks = <&gcc GCC_PCIE2_PIPE_CLK>; > + clock-names = "pipe0"; > + clock-output-names = "gcc_pcie2_pipe_clk_src"; > + #clock-cells = <0>; > + }; > + }; > + > + pcie3_phy: phy@f4000 { > + compatible = "qcom,ipq9574-qmp-gen3x2-pcie-phy"; > + reg = <0x000f4000 0x1bc>; /* Serdes PLL */ > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + clocks = <&gcc GCC_PCIE3_AUX_CLK>, > + <&gcc GCC_PCIE3_AHB_CLK>, > + <&gcc GCC_ANOC_PCIE3_2LANE_M_CLK>, > + <&gcc GCC_SNOC_PCIE3_2LANE_S_CLK>; > + clock-names = "aux", "cfg_ahb", "anoc_lane", "snoc_lane"; > + > + assigned-clocks = <&gcc GCC_PCIE3_AUX_CLK>; > + assigned-clock-rates = <20000000>; > + > + resets = <&gcc GCC_PCIE3_PHY_BCR>, > + <&gcc GCC_PCIE3PHY_PHY_BCR>; > + reset-names = "phy", "common"; > + > + status = "disabled"; > + > + pcie3_lanes: phy@f4200 { > + reg = <0x000f4200 0x16c>, /* Serdes Tx0 */ > + <0x000f4400 0x200>, /* Serdes Rx0 */ > + <0x000f5000 0x1f0>, /* PCS: Lane0, COM, PCIE */ > + <0x000f4600 0x16c>, /* Serdes Tx1 */ > + <0x000f4800 0x200>, /* Serdes Rx1 */ > + <0x000f5400 0x0f8>; /* pcs_misc */ > + > + #phy-cells = <0>; > + > + clocks = <&gcc GCC_PCIE3_PIPE_CLK>; > + clock-names = "pipe0"; > + clock-output-names = "gcc_pcie3_pipe_clk_src"; > + #clock-cells = <0>; > + }; > + }; > + > + pcie1_phy: phy@fc000 { > + compatible = "qcom,ipq9574-qmp-gen3x1-pcie-phy"; > + reg = <0x000fc000 0x1bc>; /* Serdes PLL */ > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + clocks = <&gcc GCC_PCIE1_AUX_CLK>, > + <&gcc GCC_PCIE1_AHB_CLK>, > + <&gcc GCC_ANOC_PCIE1_1LANE_M_CLK>, > + <&gcc GCC_SNOC_PCIE1_1LANE_S_CLK>; > + clock-names = "aux", "cfg_ahb", "anoc_lane", "snoc_lane"; > + > + assigned-clocks = <&gcc GCC_PCIE1_AUX_CLK>; > + assigned-clock-rates = <20000000>; > + > + resets = <&gcc GCC_PCIE1_PHY_BCR>, > + <&gcc GCC_PCIE1PHY_PHY_BCR>; > + reset-names = "phy", "common"; > + > + status = "disabled"; > + > + pcie1_lane: phy@fc200 { > + reg = <0x000fc200 0x16c>, /* Serdes Tx */ > + <0x000fc400 0x200>, /* Serdes Rx */ > + <0x000fc800 0x1f0>, /* PCS: Lane0, COM, PCIE */ > + <0x000fcc00 0xf4>; /* pcs_misc */ > + #phy-cells = <0>; > + > + clocks = <&gcc GCC_PCIE1_PIPE_CLK>; > + clock-names = "pipe0"; > + clock-output-names = "gcc_pcie1_pipe_clk_src"; > + #clock-cells = <0>; > + }; > + }; > + > tlmm: pinctrl@1000000 { > compatible = "qcom,ipq9574-tlmm"; > reg = <0x01000000 0x300000>; > @@ -145,11 +324,11 @@ > clocks = <&xo_board_clk>, > <&sleep_clk>, > <&bias_pll_ubi_nc_clk>, > - <0>, > - <0>, > - <0>, > - <0>, > - <0>; > + <&pcie30_phy0_pipe_clk>, > + <&pcie30_phy1_pipe_clk>, > + <&pcie30_phy2_pipe_clk>, > + <&pcie30_phy3_pipe_clk>, > + <&usb3phy_0_cc_pipe_clk>; pipe clock source is PHY. So should we add the pcie_phy phandle here and use it like how it is done in other targets, ex: sm8550.dtsi? > #clock-cells = <1>; > #reset-cells = <1>; > #power-domain-cells = <1>; > @@ -282,6 +461,292 @@ > status = "disabled"; > }; > }; > + > + pcie1_x1: pci@10000000 { > + compatible = "qcom,pcie-ipq9574"; > + reg = <0x10000000 0xf1d>, > + <0x10000F20 0xa8>, > + <0x10001000 0x1000>, > + <0x000F8000 0x4000>, > + <0x10100000 0x1000>, > + <0x00618108 0x4>; > + reg-names = "dbi", "elbi", "atu", "parf", "config", "aggr_noc"; > + device_type = "pci"; > + linux,pci-domain = <2>; > + bus-range = <0x00 0xff>; > + num-lanes = <1>; > + #address-cells = <3>; > + #size-cells = <2>; > + > + ranges = <0x81000000 0 0x10200000 0x10200000 > + 0 0x00100000 /* downstream I/O */ > + 0x82000000 0 0x10300000 0x10300000 > + 0 0x07d00000>; /* non-prefetchable memory */ > + > + #interrupt-cells = <1>; > + interrupt-map-mask = <0 0 0 0x7>; > + interrupt-map = <0 0 0 1 &intc 0 35 > + IRQ_TYPE_LEVEL_HIGH>, /* int_a */ > + <0 0 0 2 &intc 0 49 > + IRQ_TYPE_LEVEL_HIGH>, /* int_b */ > + <0 0 0 3 &intc 0 84 > + IRQ_TYPE_LEVEL_HIGH>, /* int_c */ > + <0 0 0 4 &intc 0 85 > + IRQ_TYPE_LEVEL_HIGH>; /* int_d */ > + > + interrupts = ; > + interrupt-names = "global_irq"; Controller driver doesn't support the "global_irq" yet. Please correct me If I am wrong. Thanks, Kathiravan T.