Linux-ARM-MSM Archive on lore.kernel.org
 help / color / Atom feed
From: Sricharan R <sricharan@codeaurora.org>
To: Christian Lamparter <chunkeey@gmail.com>
Cc: devicetree <devicetree@vger.kernel.org>,
	"Stephen Boyd" <sboyd@kernel.org>,
	linux-arm-msm@vger.kernel.org,
	"Linus Walleij" <linus.walleij@linaro.org>,
	agross@kernel.org, linux-kernel <linux-kernel@vger.kernel.org>,
	Павел <be.dissent@gmail.com>,
	"open list:GPIO SUBSYSTEM" <linux-gpio@vger.kernel.org>,
	"Rob Herring" <robh+dt@kernel.org>,
	linux-soc@vger.kernel.org, linux-clk@vger.kernel.org,
	"linux-arm Mailing List" <linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH 5/6] arm64: dts: Add ipq6018 SoC and CP01 board support
Date: Mon, 24 Jun 2019 17:38:00 +0530
Message-ID: <e2a447f8-6024-0369-f698-2027b6edcf9e@codeaurora.org> (raw)
In-Reply-To: <2600627.FlAEz51UtF@debian64>

Hi Christian,

On 6/20/2019 9:02 PM, Christian Lamparter wrote:
> Hello Sricharan,
> 
> On Wednesday, June 19, 2019 4:42:11 PM CEST Sricharan R wrote:
>> On 6/15/2019 2:11 AM, Christian Lamparter wrote:
>>> On Wednesday, June 12, 2019 11:48:48 AM CEST Sricharan R wrote:
>>>> Hi Christian,
>>>>
>>>> On 6/10/2019 5:45 PM, Christian Lamparter wrote:
>>>>> On Monday, June 10, 2019 12:09:56 PM CEST Sricharan R wrote:
>>>>>> Hi Christian,
>>>>>>
>>>>>> On 6/6/2019 2:11 AM, Christian Lamparter wrote:
>>>>>>> On Wed, Jun 5, 2019 at 7:16 PM Sricharan R <sricharan@codeaurora.org> wrote:
>>>>>>>>
>>>>>>>> Add initial device tree support for the Qualcomm IPQ6018 SoC and
>>>>>>>> CP01 evaluation board.
>>>>>>>>
>>>>>>>> Signed-off-by: Sricharan R <sricharan@codeaurora.org>
>>>>>>>> Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
>>>>>>>> --- /dev/null
>>>>>>>> +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
>>>>>>>>
>>>>>>>> +       clocks {
>>>>>>>> +               sleep_clk: sleep_clk {
>>>>>>>> +                       compatible = "fixed-clock";
>>>>>>>> +                       clock-frequency = <32000>;
>>>>>>>> +                       #clock-cells = <0>;
>>>>>>>> +               };
>>>>>>>> +
>>>>>>> Recently-ish, we ran into an issue with the clock-frequency of the sleep_clk
>>>>>>> on older IPQ40XX (and IPQ806x) on the OpenWrt Github and ML.
>>>>>>> From what I know, the external "32KHz" crystals have 32768 Hz, but the QSDK
>>>>>>> declares them at 32000 Hz. Since you probably have access to the BOM and
>>>>>>> datasheets. Can you please confirm what's the real clock frequency for
>>>>>>> the IPQ6018.
>>>>>>> (And maybe also for the sleep_clk of the IPQ4018 as well?).
>>>>>>>
>>>>>>
>>>>>> What exactly is the issue that you faced ?
>>>>>> Looking in to the docs, it is <32000> only on ipq6018 and ipq40xx as well.
>>>>>
>>>>> We need just a confirmation.
>>>>>
>>>>> Then again, Currently the qcom-ipq4019.dtsi is using 32768 Hz.
>>>>>
>>>>> |		sleep_clk: sleep_clk {
>>>>> |			compatible = "fixed-clock";
>>>>> |			clock-frequency = <32768>;
>>>>> |			#clock-cells = <0>;
>>>>> |		};
>>>>>
>>>>> <https://github.com/torvalds/linux/blob/master/arch/arm/boot/dts/qcom-ipq4019.dtsi#L144>
>>>>>
>>>>> Which makes sense, because all previous Qualcomm Atheros MIPS and the
>>>>> future IPQ8072 SoCs have been either using or deriving a 32768 Hz clock.
>>>>>
>>>>> For example: The AR9344 derives the clock from the 25MHz/40MHz external
>>>>> oscillator. This is explained in "8.16.9 Derived RTC Clock (DERIVED_RTC_CLK)".
>>>>> Which mentions that the "32KHz" clock interval is 30.5 usec / 30.48 usec
>>>>> depending whenever the external reference crystal has 40MHz or 25MHz.
>>>>> (1/30.5usec = 32.7868852 kilohertz!). The QCA9558 datasheet says the same
>>>>> in "10.19.11 Derived RTC Clock". 
>>>>>
>>>>> For IPQ8072: I point to the post by Sven Eckelmann on the OpenWrt ML:
>>>>> <http://lists.infradead.org/pipermail/openwrt-devel/2019-May/017131.html>
>>>>> "I was only able to verify for IPQ8072 that it had a 32.768 KHz
>>>>> sleep clock." 
>>>>>
>>>>> So this is pretty much "why there is an issue", it's confusing.
>>>>> Is possible can you please look if there are (fixed) divisors values
>>>>> listed in the documentation or the registers and bits that the values
>>>>> are stored in? Because then we could just calculate it. 
>>>>>
>>>>
>>>> Really sorry for the confusion. So looking little more, SLEEP_CLK is derived
>>>> from an external 38.4MHZ crystal, it is 32.768 KHZ.
>>> That's really valuable information to have. Thank you!
>>>
>>>> Somehow the clk freq plan etc seems to mention them only as .032 MHZ and misses
>>>> out. That means i will correct the patch for 32768 and probably the
>>>> ipq8074.dtsi as well
>>>
>>> Ok, there's one more issue that Paul found (at least with the IPQ4019),
>>> https://patchwork.ozlabs.org/patch/1099482
>>>
>>> it seems that the "sleep_clk" node in the qcom-ipq4019.dtsi is not used by
>>> the gcc-ipq4019.c clk driver. this causes both wifi rtc_clks and the usb sleep
>>> clks to dangle in the /sys/kernel/debug/clk/clk_summary (from a RT-AC58U)
>>>
>>>    clock                         enable_cnt  prepare_cnt        rate   accuracy   phase
>>> ----------------------------------------------------------------------------------------
>>>  xo                                       9            9    48000000          0 0
>>>  [...]
>>>  sleep_clk                                1            1       32768          0 0  
>>>  gcc_wcss5g_rtc_clk                       1            1           0          0 0  
>>>  gcc_wcss2g_rtc_clk                       1            1           0          0 0  
>>>  gcc_usb3_sleep_clk                       1            1           0          0 0  
>>>  gcc_usb2_sleep_clk                       1            1           0          0 0  
>>>
>>> with his patch the /sys/kernel/debug/clk/clk_summary looks "better" 
>>>
>>> (something like this:)
>>>
>>>    clock                         enable_cnt  prepare_cnt        rate   accuracy   phase
>>> ----------------------------------------------------------------------------------------
>>>  xo                                       9            9    48000000          0 0
>>>  [...] 
>>>  gcc_sleep_clk_src                        5            5       32000          0 0  
>>>     gcc_wcss5g_rtc_clk                    1            1       32000          0 0  
>>>     gcc_wcss2g_rtc_clk                    1            1       32000          0 0  
>>>     gcc_usb3_sleep_clk                    1            1       32000          0 0  
>>>     gcc_usb2_sleep_clk                    1            1       32000          0 0  
>>>
>>> but judging from your comment "SLEEP_CLK is derived from an
>>> external 38.4MHZ crystal" the gcc_sleep_clk_src / sleep_clk
>>> should have xo as the parent. so the ideal output should be:
>>>
>>>    clock                         enable_cnt  prepare_cnt        rate   accuracy   phase
>>> ----------------------------------------------------------------------------------------
>>>  xo                                      10           10    48000000          0 0
>>>  [...] 
>>>     gcc_sleep_clk                         5            5       32768          0 0  
>>>        gcc_wcss5g_rtc_clk                 1            1       32768          0 0  
>>>        gcc_wcss2g_rtc_clk                 1            1       32768          0 0  
>>>        gcc_usb3_sleep_clk                 1            1       32768          0 0  
>>>        gcc_usb2_sleep_clk                 1            1       32768          0 0  
>>>
>>> or am I missing/skipping over something important? 
>>>
>>
>> Sorry for the delayed response. So what i said above (32768 clk) looks
>> like true only for ipq8074. For ipq4019, looks like 32000.
>>
>> That means, there is still some thing unclear. I am checking for precise
>> information from HW team for ipq4019/8074/6018. Please hang on, will
>> update you asap.
> 
> Thank you for looking this up! I'll definitely stick around for the final
> verdict.
> 

So the HW guys responded and as per that, ipq4019/ipq6018 it is 32000.
It is derived from a 48M wifi refclk

48M wifi ref clk -> [/2 divider] -> [/750 divider] -> sleep_clk (32000)

In case of ipq8074, it is derived from the pmic and 32768.


> Also, I think the "xo" clk of your IPQ6018 dts should get the
> "always-on;" property (any maybe sleep_clk as well?).
> 
> Paul discovered that the QSDK had this extra commit
> <https://lore.kernel.org/patchwork/patch/1089385/>
> (Maybe the changeid can help you look it up internally)
> 
> For IPQ4019, this enables the high resolution with a 1ns resolution
> instead of 10ms.
> 

ho ok, this patch is needed.

Regards,
 Sricharan

-- 
"QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

  reply index

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-05 17:15 [PATCH 0/6] Add minimal boot support for IPQ6018 Sricharan R
2019-06-05 17:15 ` [PATCH 1/6] pinctrl: qcom: Add ipq6018 pinctrl driver Sricharan R
2019-06-08  3:26   ` Bjorn Andersson
2019-06-10 11:00     ` Sricharan R
2019-06-05 17:15 ` [PATCH 2/6] dt-bindings: qcom: Add ipq6018 bindings Sricharan R
2019-06-08  3:27   ` Bjorn Andersson
2019-06-10 11:01     ` Sricharan R
2019-06-19 14:54   ` Rob Herring
2019-06-05 17:15 ` [PATCH 3/6] clk: qcom: Add DT bindings for ipq6018 gcc clock controller Sricharan R
2019-06-08  3:33   ` Bjorn Andersson
2019-06-05 17:16 ` [PATCH 5/6] arm64: dts: Add ipq6018 SoC and CP01 board support Sricharan R
2019-06-05 17:26   ` Marc Zyngier
2019-06-08  2:44     ` Sricharan R
2019-06-05 20:41   ` Christian Lamparter
2019-06-10 10:09     ` Sricharan R
2019-06-10 12:15       ` Christian Lamparter
2019-06-12  9:48         ` Sricharan R
2019-06-14 20:41           ` Christian Lamparter
2019-06-19 14:42             ` Sricharan R
2019-06-20 15:32               ` Christian Lamparter
2019-06-24 12:08                 ` Sricharan R [this message]
2019-06-08  3:48   ` Bjorn Andersson
2019-06-10 15:45     ` Sricharan R
2019-06-10 16:48       ` Stephen Boyd
2019-06-05 17:16 ` [PATCH 6/6] arm64: defconfig: Enable qcom ipq6018 clock and pinctrl Sricharan R
2019-06-08  3:32   ` Bjorn Andersson
2019-06-05 17:26 ` [PATCH 0/6] Add minimal boot support for IPQ6018 Sricharan R
2019-06-07 23:08 ` Linus Walleij
     [not found] ` <1559754961-26783-5-git-send-email-sricharan@codeaurora.org>
2019-06-08  3:32   ` [PATCH 4/6] clk: qcom: Add ipq6018 Global Clock Controller support Bjorn Andersson
2019-06-10 11:47     ` Sricharan R
2019-06-10 16:58       ` Bjorn Andersson
2019-06-05 17:28 [PATCH 0/6] Add minimal boot support for IPQ6018 Sricharan R
2019-06-05 17:28 ` [PATCH 5/6] arm64: dts: Add ipq6018 SoC and CP01 board support Sricharan R
2019-06-05 17:34   ` Sudeep Holla
2019-06-08  2:44     ` Sricharan R

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=e2a447f8-6024-0369-f698-2027b6edcf9e@codeaurora.org \
    --to=sricharan@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=be.dissent@gmail.com \
    --cc=chunkeey@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-soc@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-MSM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-msm/0 linux-arm-msm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-msm linux-arm-msm/ https://lore.kernel.org/linux-arm-msm \
		linux-arm-msm@vger.kernel.org
	public-inbox-index linux-arm-msm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-arm-msm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git