From: Jonathan McDowell <noodles@earth.li>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Ansuel Smith <ansuelsmth@gmail.com>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 3/5] ARM: dts: qcom: Add USB port definitions to ipq806x
Date: Sat, 15 May 2021 17:52:55 +0100 [thread overview]
Message-ID: <eeb3a0ecb669ce0d7bb1fc3f842831cfc7d5f181.1621097174.git.noodles@earth.li> (raw)
In-Reply-To: <cover.1621097174.git.noodles@earth.li>
Signed-off-by: Jonathan McDowell <noodles@earth.li>
---
arch/arm/boot/dts/qcom-ipq8064.dtsi | 88 +++++++++++++++++++++++++++++
1 file changed, 88 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 582d8a59e59b..afa11acfb378 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -1026,6 +1026,94 @@
status = "disabled";
};
+ hs_phy_0: hs_phy_0 {
+ compatible = "qcom,ipq806x-usb-phy-hs";
+ reg = <0x100f8800 0x30>;
+ clocks = <&gcc USB30_0_UTMI_CLK>;
+ clock-names = "ref";
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ ss_phy_0: ss_phy_0 {
+ compatible = "qcom,ipq806x-usb-phy-ss";
+ reg = <0x100f8830 0x30>;
+ clocks = <&gcc USB30_0_MASTER_CLK>;
+ clock-names = "ref";
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ usb3_0: usb3@100f8800 {
+ compatible = "qcom,dwc3", "syscon";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x100f8800 0x8000>;
+ clocks = <&gcc USB30_0_MASTER_CLK>;
+ clock-names = "core";
+
+ ranges;
+
+ resets = <&gcc USB30_0_MASTER_RESET>;
+ reset-names = "master";
+
+ status = "disabled";
+
+ dwc3_0: dwc3@10000000 {
+ compatible = "snps,dwc3";
+ reg = <0x10000000 0xcd00>;
+ interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&hs_phy_0>, <&ss_phy_0>;
+ phy-names = "usb2-phy", "usb3-phy";
+ dr_mode = "host";
+ snps,dis_u3_susphy_quirk;
+ };
+ };
+
+ hs_phy_1: hs_phy_1 {
+ compatible = "qcom,ipq806x-usb-phy-hs";
+ reg = <0x110f8800 0x30>;
+ clocks = <&gcc USB30_1_UTMI_CLK>;
+ clock-names = "ref";
+ #phy-cells = <0>;
+ };
+
+ ss_phy_1: ss_phy_1 {
+ compatible = "qcom,ipq806x-usb-phy-ss";
+ reg = <0x110f8830 0x30>;
+ clocks = <&gcc USB30_1_MASTER_CLK>;
+ clock-names = "ref";
+ #phy-cells = <0>;
+ };
+
+ usb3_1: usb3@110f8800 {
+ compatible = "qcom,dwc3", "syscon";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x110f8800 0x8000>;
+ clocks = <&gcc USB30_1_MASTER_CLK>;
+ clock-names = "core";
+
+ ranges;
+
+ resets = <&gcc USB30_1_MASTER_RESET>;
+ reset-names = "master";
+
+ status = "disabled";
+
+ dwc3_1: dwc3@11000000 {
+ compatible = "snps,dwc3";
+ reg = <0x11000000 0xcd00>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&hs_phy_1>, <&ss_phy_1>;
+ phy-names = "usb2-phy", "usb3-phy";
+ dr_mode = "host";
+ snps,dis_u3_susphy_quirk;
+ };
+ };
+
vsdcc_fixed: vsdcc-regulator {
compatible = "regulator-fixed";
regulator-name = "SDCC Power";
--
2.20.1
next prev parent reply other threads:[~2021-05-15 17:22 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-15 16:52 [PATCH 0/5] ARM: dts: qcom: Enable various devices for IPQ806x / RB3011 Jonathan McDowell
2021-05-15 16:52 ` [PATCH 1/5] ARM: dts: qcom: Add ADM DMA + NAND definitions to ipq806x Jonathan McDowell
2021-05-17 9:40 ` Vinod Koul
2021-05-19 10:29 ` Jonathan McDowell
2021-05-15 16:52 ` [PATCH 2/5] ARM: dts: qcom: Add tsens details " Jonathan McDowell
2021-05-17 9:42 ` Vinod Koul
2021-05-19 11:00 ` Jonathan McDowell
2021-05-15 16:52 ` Jonathan McDowell [this message]
2021-05-15 16:53 ` [PATCH 4/5] ARM: dts: qcom: add L2CC and RPM for IPQ8064 Jonathan McDowell
2021-05-15 16:53 ` [PATCH 5/5] ARM: dts: qcom: Enable NAND + USB for RB3011 Jonathan McDowell
2021-05-20 17:29 ` [PATCH v2 0/5] ARM: dts: qcom: Enable various devices for IPQ806x / RB3011 Jonathan McDowell
2021-05-20 17:29 ` [PATCH v2 1/5] ARM: dts: qcom: Add ADM DMA + NAND definitions to ipq806x Jonathan McDowell
2021-05-20 17:29 ` [PATCH v2 2/5] ARM: dts: qcom: Add tsens details " Jonathan McDowell
2021-05-20 17:30 ` [PATCH v2 3/5] ARM: dts: qcom: Add USB port definitions " Jonathan McDowell
2021-05-31 15:58 ` Bjorn Andersson
2021-05-20 17:30 ` [PATCH v2 4/5] ARM: dts: qcom: add L2CC and RPM for IPQ8064 Jonathan McDowell
2021-05-20 17:30 ` [PATCH v2 5/5] ARM: dts: qcom: Enable NAND + USB for RB3011 Jonathan McDowell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=eeb3a0ecb669ce0d7bb1fc3f842831cfc7d5f181.1621097174.git.noodles@earth.li \
--to=noodles@earth.li \
--cc=agross@kernel.org \
--cc=ansuelsmth@gmail.com \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).