linux-bcache.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Coly Li <colyli@suse.de>
To: linux-bcache@vger.kernel.org
Cc: linux-block@vger.kernel.org, hare@suse.de, Coly Li <colyli@suse.de>
Subject: [PATCH v4 10/16] bcache: handle cache prio_buckets and disk_buckets properly for bucket size > 8MB
Date: Fri, 17 Jul 2020 19:22:30 +0800	[thread overview]
Message-ID: <20200717112236.44761-11-colyli@suse.de> (raw)
In-Reply-To: <20200717112236.44761-1-colyli@suse.de>

Similar to c->uuids, struct cache's prio_buckets and disk_buckets also
have the potential memory allocation failure during cache registration
if the bucket size > 8MB.

ca->prio_buckets can be stored on cache device in multiple buckets, its
in-memory space is allocated by kzalloc() interface but normally
allocated by alloc_pages() because the size > KMALLOC_MAX_CACHE_SIZE.

So allocation of ca->prio_buckets has the MAX_ORDER restriction too. If
the bucket size > 8MB, by default the page allocator will fail because
the page order > 11 (default MAX_ORDER value). ca->prio_buckets should
also use meta_bucket_bytes(), meta_bucket_pages() to decide its memory
size and use alloc_meta_bucket_pages() to allocate pages, to avoid the
allocation failure during cache set registration when bucket size > 8MB.

ca->disk_buckets is a single bucket size memory buffer, it is used to
iterate each bucket of ca->prio_buckets, and compose the bio based on
memory of ca->disk_buckets, then write ca->disk_buckets memory to cache
disk one-by-one for each bucket of ca->prio_buckets. ca->disk_buckets
should have in-memory size exact to the meta_bucket_pages(), this is the
size that ca->prio_buckets will be stored into each on-disk bucket.

This patch fixes the above issues and handle cache's prio_buckets and
disk_buckets properly for bucket size larger than 8MB.

Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
---
 drivers/md/bcache/bcache.h |  9 +++++----
 drivers/md/bcache/super.c  | 10 +++++-----
 2 files changed, 10 insertions(+), 9 deletions(-)

diff --git a/drivers/md/bcache/bcache.h b/drivers/md/bcache/bcache.h
index 972f1aff0f70..0ebfda284866 100644
--- a/drivers/md/bcache/bcache.h
+++ b/drivers/md/bcache/bcache.h
@@ -782,11 +782,12 @@ static inline unsigned int meta_bucket_bytes(struct cache_sb *sb)
 	return meta_bucket_pages(sb) << PAGE_SHIFT;
 }
 
-#define prios_per_bucket(c)				\
-	((bucket_bytes(c) - sizeof(struct prio_set)) /	\
+#define prios_per_bucket(ca)						\
+	((meta_bucket_bytes(&(ca)->sb) - sizeof(struct prio_set)) /	\
 	 sizeof(struct bucket_disk))
-#define prio_buckets(c)					\
-	DIV_ROUND_UP((size_t) (c)->sb.nbuckets, prios_per_bucket(c))
+
+#define prio_buckets(ca)						\
+	DIV_ROUND_UP((size_t) (ca)->sb.nbuckets, prios_per_bucket(ca))
 
 static inline size_t sector_to_bucket(struct cache_set *c, sector_t s)
 {
diff --git a/drivers/md/bcache/super.c b/drivers/md/bcache/super.c
index a19f1baa8664..1c4a4c3557f7 100644
--- a/drivers/md/bcache/super.c
+++ b/drivers/md/bcache/super.c
@@ -563,7 +563,7 @@ static void prio_io(struct cache *ca, uint64_t bucket, int op,
 
 	bio->bi_iter.bi_sector	= bucket * ca->sb.bucket_size;
 	bio_set_dev(bio, ca->bdev);
-	bio->bi_iter.bi_size	= bucket_bytes(ca);
+	bio->bi_iter.bi_size	= meta_bucket_bytes(&ca->sb);
 
 	bio->bi_end_io	= prio_endio;
 	bio->bi_private = ca;
@@ -621,7 +621,7 @@ int bch_prio_write(struct cache *ca, bool wait)
 
 		p->next_bucket	= ca->prio_buckets[i + 1];
 		p->magic	= pset_magic(&ca->sb);
-		p->csum		= bch_crc64(&p->magic, bucket_bytes(ca) - 8);
+		p->csum		= bch_crc64(&p->magic, meta_bucket_bytes(&ca->sb) - 8);
 
 		bucket = bch_bucket_alloc(ca, RESERVE_PRIO, wait);
 		BUG_ON(bucket == -1);
@@ -674,7 +674,7 @@ static int prio_read(struct cache *ca, uint64_t bucket)
 			prio_io(ca, bucket, REQ_OP_READ, 0);
 
 			if (p->csum !=
-			    bch_crc64(&p->magic, bucket_bytes(ca) - 8)) {
+			    bch_crc64(&p->magic, meta_bucket_bytes(&ca->sb) - 8)) {
 				pr_warn("bad csum reading priorities\n");
 				goto out;
 			}
@@ -2222,7 +2222,7 @@ void bch_cache_release(struct kobject *kobj)
 		ca->set->cache[ca->sb.nr_this_dev] = NULL;
 	}
 
-	free_pages((unsigned long) ca->disk_buckets, ilog2(bucket_pages(ca)));
+	free_pages((unsigned long) ca->disk_buckets, ilog2(meta_bucket_pages(&ca->sb)));
 	kfree(ca->prio_buckets);
 	vfree(ca->buckets);
 
@@ -2319,7 +2319,7 @@ static int cache_alloc(struct cache *ca)
 		goto err_prio_buckets_alloc;
 	}
 
-	ca->disk_buckets = alloc_bucket_pages(GFP_KERNEL, ca);
+	ca->disk_buckets = alloc_meta_bucket_pages(GFP_KERNEL, &ca->sb);
 	if (!ca->disk_buckets) {
 		err = "ca->disk_buckets alloc failed";
 		goto err_disk_buckets_alloc;
-- 
2.26.2


  parent reply	other threads:[~2020-07-17 11:23 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-17 11:22 [PATCH v4 00/16] bcache: extend bucket size to 32bit width Coly Li
2020-07-17 11:22 ` [PATCH v4 01/16] bcache: add read_super_common() to read major part of super block Coly Li
2020-07-17 11:22 ` [PATCH v4 02/16] bcache: add more accurate error information in read_super_common() Coly Li
2020-07-17 11:22 ` [PATCH v4 03/16] bcache: disassemble the big if() checks in bch_cache_set_alloc() Coly Li
2020-07-17 11:22 ` [PATCH v4 04/16] bcache: fix super block seq numbers comparision in register_cache_set() Coly Li
2020-07-17 11:22 ` [PATCH v4 05/16] bcache: increase super block version for cache device and backing device Coly Li
2020-07-17 11:22 ` [PATCH v4 06/16] bcache: move bucket related code into read_super_common() Coly Li
2020-07-17 11:22 ` [PATCH v4 07/16] bcache: struct cache_sb is only for in-memory super block now Coly Li
2020-07-17 11:22 ` [PATCH v4 08/16] bcache: introduce meta_bucket_pages() related helper routines Coly Li
2020-07-17 11:22 ` [PATCH v4 09/16] bcache: handle c->uuids properly for bucket size > 8MB Coly Li
2020-07-17 11:22 ` Coly Li [this message]
2020-07-17 11:22 ` [PATCH v4 11/16] bcache: handle cache set verify_ondisk " Coly Li
2020-07-17 11:22 ` [PATCH v4 12/16] bcache: handle btree node memory allocation " Coly Li
2020-07-17 11:22 ` [PATCH v4 13/16] bcache: add bucket_size_hi into struct cache_sb_disk for large bucket Coly Li
2020-07-17 11:22 ` [PATCH v4 14/16] bcache: add sysfs file to display feature sets information of cache set Coly Li
2020-07-17 11:22 ` [PATCH v4 15/16] bcache: avoid extra memory allocation from mempool c->fill_iter Coly Li
2020-07-17 11:22 ` [PATCH v4 16/16] bcache: avoid extra memory consumption in struct bbio for large bucket size Coly Li

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200717112236.44761-11-colyli@suse.de \
    --to=colyli@suse.de \
    --cc=hare@suse.de \
    --cc=linux-bcache@vger.kernel.org \
    --cc=linux-block@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).