From: Dongli Zhang <dongli.zhang@oracle.com>
To: xen-devel@lists.xenproject.org, linux-block@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: konrad.wilk@oracle.com, roger.pau@citrix.com, axboe@kernel.dk,
paul.durrant@citrix.com
Subject: [PATCH v5 2/2] xen/blkback: rework connect_ring() to avoid inconsistent xenstore 'ring-page-order' set by malicious blkfront
Date: Tue, 8 Jan 2019 16:15:50 +0800 [thread overview]
Message-ID: <1546935350-20957-2-git-send-email-dongli.zhang@oracle.com> (raw)
In-Reply-To: <1546935350-20957-1-git-send-email-dongli.zhang@oracle.com>
The xenstore 'ring-page-order' is used globally for each blkback queue and
therefore should be read from xenstore only once. However, it is obtained
in read_per_ring_refs() which might be called multiple times during the
initialization of each blkback queue.
If the blkfront is malicious and the 'ring-page-order' is set in different
value by blkfront every time before blkback reads it, this may end up at
the "WARN_ON(i != (XEN_BLKIF_REQS_PER_PAGE * blkif->nr_ring_pages));" in
xen_blkif_disconnect() when frontend is destroyed.
This patch reworks connect_ring() to read xenstore 'ring-page-order' only
once.
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
---
Changed since v1:
* change the order of xenstore read in read_per_ring_refs
* use xenbus_read_unsigned() in connect_ring()
Changed since v2:
* simplify the condition check as "(err != 1 && nr_grefs > 1)"
* avoid setting err as -EINVAL to remove extra one line of code
Changed since v3:
* exit at the beginning if !nr_grefs
* change the if statements to avoid test (err != 1) twice
* initialize a 'blkif' stack variable (refer to PATCH 1/2)
Changed since v4:
* use BUG_ON() when (nr_grefs == 0) to reminder the developer
* set err = -EINVAL before xenbus_dev_fatal()
drivers/block/xen-blkback/xenbus.c | 69 ++++++++++++++++++++++----------------
1 file changed, 40 insertions(+), 29 deletions(-)
diff --git a/drivers/block/xen-blkback/xenbus.c b/drivers/block/xen-blkback/xenbus.c
index a4aadac..f6146cd 100644
--- a/drivers/block/xen-blkback/xenbus.c
+++ b/drivers/block/xen-blkback/xenbus.c
@@ -926,7 +926,7 @@ static int read_per_ring_refs(struct xen_blkif_ring *ring, const char *dir)
int err, i, j;
struct xen_blkif *blkif = ring->blkif;
struct xenbus_device *dev = blkif->be->dev;
- unsigned int ring_page_order, nr_grefs, evtchn;
+ unsigned int nr_grefs, evtchn;
err = xenbus_scanf(XBT_NIL, dir, "event-channel", "%u",
&evtchn);
@@ -936,43 +936,39 @@ static int read_per_ring_refs(struct xen_blkif_ring *ring, const char *dir)
return err;
}
- err = xenbus_scanf(XBT_NIL, dev->otherend, "ring-page-order", "%u",
- &ring_page_order);
- if (err != 1) {
- err = xenbus_scanf(XBT_NIL, dir, "ring-ref", "%u", &ring_ref[0]);
+ nr_grefs = blkif->nr_ring_pages;
+
+ BUG_ON(!nr_grefs);
+
+ for (i = 0; i < nr_grefs; i++) {
+ char ring_ref_name[RINGREF_NAME_LEN];
+
+ snprintf(ring_ref_name, RINGREF_NAME_LEN, "ring-ref%u", i);
+ err = xenbus_scanf(XBT_NIL, dir, ring_ref_name,
+ "%u", &ring_ref[i]);
+
if (err != 1) {
+ if (nr_grefs == 1)
+ break;
+
err = -EINVAL;
- xenbus_dev_fatal(dev, err, "reading %s/ring-ref", dir);
+ xenbus_dev_fatal(dev, err, "reading %s/%s",
+ dir, ring_ref_name);
return err;
}
- nr_grefs = 1;
- } else {
- unsigned int i;
+ }
- if (ring_page_order > xen_blkif_max_ring_order) {
+ if (err != 1) {
+ WARN_ON(nr_grefs != 1);
+
+ err = xenbus_scanf(XBT_NIL, dir, "ring-ref", "%u",
+ &ring_ref[0]);
+ if (err != 1) {
err = -EINVAL;
- xenbus_dev_fatal(dev, err, "%s/request %d ring page order exceed max:%d",
- dir, ring_page_order,
- xen_blkif_max_ring_order);
+ xenbus_dev_fatal(dev, err, "reading %s/ring-ref", dir);
return err;
}
-
- nr_grefs = 1 << ring_page_order;
- for (i = 0; i < nr_grefs; i++) {
- char ring_ref_name[RINGREF_NAME_LEN];
-
- snprintf(ring_ref_name, RINGREF_NAME_LEN, "ring-ref%u", i);
- err = xenbus_scanf(XBT_NIL, dir, ring_ref_name,
- "%u", &ring_ref[i]);
- if (err != 1) {
- err = -EINVAL;
- xenbus_dev_fatal(dev, err, "reading %s/%s",
- dir, ring_ref_name);
- return err;
- }
- }
}
- blkif->nr_ring_pages = nr_grefs;
for (i = 0; i < nr_grefs * XEN_BLKIF_REQS_PER_PAGE; i++) {
req = kzalloc(sizeof(*req), GFP_KERNEL);
@@ -1031,6 +1027,7 @@ static int connect_ring(struct backend_info *be)
size_t xspathsize;
const size_t xenstore_path_ext_size = 11; /* sufficient for "/queue-NNN" */
unsigned int requested_num_queues = 0;
+ unsigned int ring_page_order;
pr_debug("%s %s\n", __func__, dev->otherend);
@@ -1076,6 +1073,20 @@ static int connect_ring(struct backend_info *be)
blkif->nr_rings, blkif->blk_protocol, protocol,
pers_grants ? "persistent grants" : "");
+ ring_page_order = xenbus_read_unsigned(dev->otherend,
+ "ring-page-order", 0);
+
+ if (ring_page_order > xen_blkif_max_ring_order) {
+ err = -EINVAL;
+ xenbus_dev_fatal(dev, err,
+ "requested ring page order %d exceed max:%d",
+ ring_page_order,
+ xen_blkif_max_ring_order);
+ return err;
+ }
+
+ blkif->nr_ring_pages = 1 << ring_page_order;
+
if (blkif->nr_rings == 1)
return read_per_ring_refs(&blkif->rings[0], dev->otherend);
else {
--
2.7.4
next prev parent reply other threads:[~2019-01-08 8:13 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-08 8:15 [PATCH v5 1/2] xen/blkback: add stack variable 'blkif' in connect_ring() Dongli Zhang
2019-01-08 8:15 ` Dongli Zhang [this message]
2019-01-08 8:24 ` [Xen-devel] [PATCH v5 2/2] xen/blkback: rework connect_ring() to avoid inconsistent xenstore 'ring-page-order' set by malicious blkfront Dongli Zhang
2019-01-16 16:32 ` Konrad Rzeszutek Wilk
2019-01-17 0:01 ` Dongli Zhang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1546935350-20957-2-git-send-email-dongli.zhang@oracle.com \
--to=dongli.zhang@oracle.com \
--cc=axboe@kernel.dk \
--cc=konrad.wilk@oracle.com \
--cc=linux-block@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=paul.durrant@citrix.com \
--cc=roger.pau@citrix.com \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).