[PATCH v5 04/16] lpfc: vmid: Add the datastructure for supporting VMID in lpfc

[Muneendra <muneendra.kumar@broadcom.com>]

[-- Attachment #1: Type: text/plain, Size: 6170 bytes --]

From: Gaurav Srivastava <gaurav.srivastava@broadcom.com>

This patch adds the primary datastructures needed to implement VMID in lpfc
driver. It maintains the capability, current state, hash table for the
vmid/appid along with other information.

Signed-off-by: Gaurav Srivastava <gaurav.srivastava@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>

---
v5:
No Change

v4:
No change

v3:
No change

v2:
Ported the patch on top of 5.10/scsi-queue
Removed unused variable.
---
 drivers/scsi/lpfc/lpfc.h | 97 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 97 insertions(+)

diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index a54c8da30273..ab61352363d4 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -303,6 +303,63 @@ struct lpfc_stats {
 struct lpfc_hba;
 
 
+#define LPFC_VMID_TIMER   300	/* timer interval in seconds. */
+
+#define LPFC_MAX_VMID_SIZE      256
+#define LPFC_COMPRESS_VMID_SIZE 16
+
+union lpfc_vmid_io_tag {
+	u32 app_id;	/* App Id vmid */
+	u8 cs_ctl_vmid;	/* Priority tag vmid */
+};
+
+#define JIFFIES_PER_HR	(HZ * 60 * 60)
+
+struct lpfc_vmid {
+	u8 flag;
+#define LPFC_VMID_SLOT_FREE     0x0
+#define LPFC_VMID_SLOT_USED     0x1
+#define LPFC_VMID_REQ_REGISTER  0x2
+#define LPFC_VMID_REGISTERED    0x4
+#define LPFC_VMID_DE_REGISTER   0x8
+	u8 host_vmid[LPFC_MAX_VMID_SIZE];
+	union lpfc_vmid_io_tag un;
+	u64 io_rd_cnt;
+	u64 io_wr_cnt;
+	u8 vmid_len;
+	u8 delete_inactive; /* Delete if inactive flag 0 = no, 1 = yes */
+	u32 hash_index;
+	u64 __percpu *last_io_time;
+};
+
+#define lpfc_vmid_is_type_priority_tag(vport)\
+	(vport->vmid_priority_tagging ? 1 : 0)
+
+#define LPFC_VMID_HASH_SIZE     256
+#define LPFC_VMID_HASH_MASK     255
+#define LPFC_VMID_HASH_SHIFT    6
+
+struct lpfc_vmid_context {
+	struct lpfc_vmid *vmp;
+	struct lpfc_nodelist *nlp;
+	u8 instantiated;
+};
+
+struct lpfc_vmid_priority_range {
+	u8 low;
+	u8 high;
+	u8 qos;
+};
+
+struct lpfc_vmid_priority_info {
+	u32 num_descriptors;
+	struct lpfc_vmid_priority_range *vmid_range;
+};
+
+#define QFPA_EVEN_ONLY 0x01
+#define QFPA_ODD_ONLY  0x02
+#define QFPA_EVEN_ODD  0x03
+
 enum discovery_state {
 	LPFC_VPORT_UNKNOWN     =  0,    /* vport state is unknown */
 	LPFC_VPORT_FAILED      =  1,    /* vport has failed */
@@ -442,6 +499,9 @@ struct lpfc_vport {
 #define WORKER_RAMP_DOWN_QUEUE         0x800	/* hba: Decrease Q depth */
 #define WORKER_RAMP_UP_QUEUE           0x1000	/* hba: Increase Q depth */
 #define WORKER_SERVICE_TXQ             0x2000	/* hba: IOCBs on the txq */
+#define WORKER_CHECK_INACTIVE_VMID     0x4000	/* hba: check inactive vmids */
+#define WORKER_CHECK_VMID_ISSUE_QFPA   0x8000	/* vport: Check if qfpa need */
+						/* to issue */
 
 	struct timer_list els_tmofunc;
 	struct timer_list delayed_disc_tmo;
@@ -452,6 +512,8 @@ struct lpfc_vport {
 #define FC_LOADING		0x1	/* HBA in process of loading drvr */
 #define FC_UNLOADING		0x2	/* HBA in process of unloading drvr */
 #define FC_ALLOW_FDMI		0x4	/* port is ready for FDMI requests */
+#define FC_ALLOW_VMID		0x8	/* Allow VMID IO's */
+#define FC_DEREGISTER_ALL_APP_ID	0x10	/* Deregister all vmid's */
 	/* Vport Config Parameters */
 	uint32_t cfg_scan_down;
 	uint32_t cfg_lun_queue_depth;
@@ -470,9 +532,36 @@ struct lpfc_vport {
 	uint32_t cfg_tgt_queue_depth;
 	uint32_t cfg_first_burst_size;
 	uint32_t dev_loss_tmo_changed;
+	/* VMID parameters */
+	u8 lpfc_vmid_host_uuid[LPFC_COMPRESS_VMID_SIZE];
+	u32 max_vmid;	/* maximum VMIDs allowed per port */
+	u32 cur_vmid_cnt;	/* Current VMID count */
+#define LPFC_MIN_VMID	4
+#define LPFC_MAX_VMID	255
+	u32 vmid_inactivity_timeout;	/* Time after which the VMID */
+						/* deregisters from switch */
+	u32 vmid_priority_tagging;
+#define LPFC_VMID_PRIO_TAG_DISABLE	0 /* Disable */
+#define LPFC_VMID_PRIO_TAG_SUP_TARGETS	1 /* Allow supported targets only */
+#define LPFC_VMID_PRIO_TAG_ALL_TARGETS	2 /* Allow all targets */
+	unsigned long *vmid_priority_range;
+#define LPFC_VMID_MAX_PRIORITY_RANGE    256
+#define LPFC_VMID_PRIORITY_BITMAP_SIZE  32
+	u8 vmid_flag;
+#define LPFC_VMID_IN_USE		0x1
+#define LPFC_VMID_ISSUE_QFPA		0x2
+#define LPFC_VMID_QFPA_CMPL		0x4
+#define LPFC_VMID_QOS_ENABLED		0x8
+#define LPFC_VMID_TIMER_ENBLD		0x10
+	struct fc_qfpa_res *qfpa_res;
 
 	struct fc_vport *fc_vport;
 
+	struct lpfc_vmid *vmid;
+	struct lpfc_vmid *hash_table[LPFC_VMID_HASH_SIZE];
+	rwlock_t vmid_lock;
+	struct lpfc_vmid_priority_info vmid_priority;
+
 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
 	struct dentry *debug_disc_trc;
 	struct dentry *debug_nodelist;
@@ -934,6 +1023,13 @@ struct lpfc_hba {
 	struct nvmet_fc_target_port *targetport;
 	lpfc_vpd_t vpd;		/* vital product data */
 
+	u32 cfg_max_vmid;	/* maximum VMIDs allowed per port */
+	u32 cfg_vmid_app_header;
+#define LPFC_VMID_APP_HEADER_DISABLE	0
+#define LPFC_VMID_APP_HEADER_ENABLE	1
+	u32 cfg_vmid_priority_tagging;
+	u32 cfg_vmid_inactivity_timeout;	/* Time after which the VMID */
+						/*  deregisters from switch */
 	struct pci_dev *pcidev;
 	struct list_head      work_list;
 	uint32_t              work_ha;      /* Host Attention Bits for WT */
@@ -1175,6 +1271,7 @@ struct lpfc_hba {
 	struct list_head ct_ev_waiters;
 	struct unsol_rcv_ct_ctx ct_ctx[LPFC_CT_CTX_MAX];
 	uint32_t ctx_idx;
+	struct timer_list inactive_vmid_poll;
 
 	/* RAS Support */
 	struct lpfc_ras_fwlog ras_fwlog;
-- 
2.26.2


-- 
This electronic communication and the information and any files transmitted 
with it, or attached to it, are confidential and are intended solely for 
the use of the individual or entity to whom it is addressed and may contain 
information that is confidential, legally privileged, protected by privacy 
laws, or otherwise restricted from disclosure to anyone else. If you are 
not the intended recipient or the person responsible for delivering the 
e-mail to the intended recipient, you are hereby notified that any use, 
copying, distributing, dissemination, forwarding, printing, or copying of 
this e-mail is strictly prohibited. If you received this e-mail in error, 
please return the e-mail to the sender, delete it from your computer, and 
destroy any printed copy of it.

[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4177 bytes --]