From: Roman Pen <roman.penyaev@profitbricks.com>
To: linux-block@vger.kernel.org, linux-rdma@vger.kernel.org
Cc: Jens Axboe <axboe@kernel.dk>,
Christoph Hellwig <hch@infradead.org>,
Sagi Grimberg <sagi@grimberg.me>,
Bart Van Assche <bart.vanassche@sandisk.com>,
Or Gerlitz <ogerlitz@mellanox.com>,
Roman Pen <roman.penyaev@profitbricks.com>,
Danil Kipnis <danil.kipnis@profitbricks.com>,
Jack Wang <jinpu.wang@profitbricks.com>
Subject: [PATCH 00/24] InfiniBand Transport (IBTRS) and Network Block Device (IBNBD)
Date: Fri, 2 Feb 2018 15:08:40 +0100 [thread overview]
Message-ID: <20180202140904.2017-1-roman.penyaev@profitbricks.com> (raw)
This series introduces IBNBD/IBTRS modules.
IBTRS (InfiniBand Transport) is a reliable high speed transport library
which allows for establishing connection between client and server
machines via RDMA. It is optimized to transfer (read/write) IO blocks
in the sense that it follows the BIO semantics of providing the
possibility to either write data from a scatter-gather list to the
remote side or to request ("read") data transfer from the remote side
into a given set of buffers.
IBTRS is multipath capable and provides I/O fail-over and load-balancing
functionality.
IBNBD (InfiniBand Network Block Device) is a pair of kernel modules
(client and server) that allow for remote access of a block device on
the server over IBTRS protocol. After being mapped, the remote block
devices can be accessed on the client side as local block devices.
Internally IBNBD uses IBTRS as an RDMA transport library.
Why?
- IBNBD/IBTRS is developed in order to map thin provisioned volumes,
thus internal protocol is simple and consists of several request
types only without awareness of underlaying hardware devices.
- IBTRS was developed as an independent RDMA transport library, which
supports fail-over and load-balancing policies using multipath, thus
it can be used for any other IO needs rather than only for block
device.
- IBNBD/IBTRS is faster than NVME over RDMA. Old comparison results:
https://www.spinics.net/lists/linux-rdma/msg48799.html
(I retested on latest 4.14 kernel - there is no any significant
difference, thus I post the old link).
Key features of IBTRS transport library and IBNBD block device:
o High throughput and low latency due to:
- Only two RDMA messages per IO.
- IMM InfiniBand messages on responses to reduce round trip latency.
- Simplified memory management: memory allocation happens once on
server side when IBTRS session is established.
o IO fail-over and load-balancing by using multipath.
o Simple configuration of IBNBD:
- Server side is completely passive: volumes do not need to be
explicitly exported.
- Only IB port GID and device path needed on client side to map
a block device.
- A device is remapped automatically i.e. after storage reboot.
This series is a second try, first variant was published [1] and
presented on Vault in 2017 [2].
Since the first version the following was changed:
- Load-balancing and IO fail-over using multipath features were added.
- Major parts of the code were rewritten, simplified and overall code
size was reduced by a quarter.
Commits for kernel can be found here:
https://github.com/profitbricks/ibnbd/commits/linux-4.15-rc8
The out-of-tree modules are here:
https://github.com/profitbricks/ibnbd/
[1] https://lwn.net/Articles/718181/
[2] http://events.linuxfoundation.org/sites/events/files/slides/IBNBD-Vault-2017.pdf
Roman Pen (24):
ibtrs: public interface header to establish RDMA connections
ibtrs: private headers with IBTRS protocol structs and helpers
ibtrs: core: lib functions shared between client and server modules
ibtrs: client: private header with client structs and functions
ibtrs: client: main functionality
ibtrs: client: statistics functions
ibtrs: client: sysfs interface functions
ibtrs: server: private header with server structs and functions
ibtrs: server: main functionality
ibtrs: server: statistics functions
ibtrs: server: sysfs interface functions
ibtrs: include client and server modules into kernel compilation
ibtrs: a bit of documentation
ibnbd: private headers with IBNBD protocol structs and helpers
ibnbd: client: private header with client structs and functions
ibnbd: client: main functionality
ibnbd: client: sysfs interface functions
ibnbd: server: private header with server structs and functions
ibnbd: server: main functionality
ibnbd: server: functionality for IO submission to file or block dev
ibnbd: server: sysfs interface functions
ibnbd: include client and server modules into kernel compilation
ibnbd: a bit of documentation
MAINTAINERS: Add maintainer for IBNBD/IBTRS modules
MAINTAINERS | 14 +
drivers/block/Kconfig | 2 +
drivers/block/Makefile | 1 +
drivers/block/ibnbd/Kconfig | 22 +
drivers/block/ibnbd/Makefile | 13 +
drivers/block/ibnbd/README | 272 ++
drivers/block/ibnbd/ibnbd-clt-sysfs.c | 723 +++++
drivers/block/ibnbd/ibnbd-clt.c | 1959 +++++++++++++
drivers/block/ibnbd/ibnbd-clt.h | 193 ++
drivers/block/ibnbd/ibnbd-log.h | 71 +
drivers/block/ibnbd/ibnbd-proto.h | 360 +++
drivers/block/ibnbd/ibnbd-srv-dev.c | 410 +++
drivers/block/ibnbd/ibnbd-srv-dev.h | 149 +
drivers/block/ibnbd/ibnbd-srv-sysfs.c | 264 ++
drivers/block/ibnbd/ibnbd-srv.c | 901 ++++++
drivers/block/ibnbd/ibnbd-srv.h | 100 +
drivers/infiniband/Kconfig | 1 +
drivers/infiniband/ulp/Makefile | 1 +
drivers/infiniband/ulp/ibtrs/Kconfig | 20 +
drivers/infiniband/ulp/ibtrs/Makefile | 15 +
drivers/infiniband/ulp/ibtrs/README | 238 ++
drivers/infiniband/ulp/ibtrs/ibtrs-clt-stats.c | 455 +++
drivers/infiniband/ulp/ibtrs/ibtrs-clt-sysfs.c | 519 ++++
drivers/infiniband/ulp/ibtrs/ibtrs-clt.c | 3496 ++++++++++++++++++++++++
drivers/infiniband/ulp/ibtrs/ibtrs-clt.h | 338 +++
drivers/infiniband/ulp/ibtrs/ibtrs-log.h | 94 +
drivers/infiniband/ulp/ibtrs/ibtrs-pri.h | 494 ++++
drivers/infiniband/ulp/ibtrs/ibtrs-srv-stats.c | 110 +
drivers/infiniband/ulp/ibtrs/ibtrs-srv-sysfs.c | 278 ++
drivers/infiniband/ulp/ibtrs/ibtrs-srv.c | 1811 ++++++++++++
drivers/infiniband/ulp/ibtrs/ibtrs-srv.h | 169 ++
drivers/infiniband/ulp/ibtrs/ibtrs.c | 582 ++++
drivers/infiniband/ulp/ibtrs/ibtrs.h | 331 +++
33 files changed, 14406 insertions(+)
create mode 100644 drivers/block/ibnbd/Kconfig
create mode 100644 drivers/block/ibnbd/Makefile
create mode 100644 drivers/block/ibnbd/README
create mode 100644 drivers/block/ibnbd/ibnbd-clt-sysfs.c
create mode 100644 drivers/block/ibnbd/ibnbd-clt.c
create mode 100644 drivers/block/ibnbd/ibnbd-clt.h
create mode 100644 drivers/block/ibnbd/ibnbd-log.h
create mode 100644 drivers/block/ibnbd/ibnbd-proto.h
create mode 100644 drivers/block/ibnbd/ibnbd-srv-dev.c
create mode 100644 drivers/block/ibnbd/ibnbd-srv-dev.h
create mode 100644 drivers/block/ibnbd/ibnbd-srv-sysfs.c
create mode 100644 drivers/block/ibnbd/ibnbd-srv.c
create mode 100644 drivers/block/ibnbd/ibnbd-srv.h
create mode 100644 drivers/infiniband/ulp/ibtrs/Kconfig
create mode 100644 drivers/infiniband/ulp/ibtrs/Makefile
create mode 100644 drivers/infiniband/ulp/ibtrs/README
create mode 100644 drivers/infiniband/ulp/ibtrs/ibtrs-clt-stats.c
create mode 100644 drivers/infiniband/ulp/ibtrs/ibtrs-clt-sysfs.c
create mode 100644 drivers/infiniband/ulp/ibtrs/ibtrs-clt.c
create mode 100644 drivers/infiniband/ulp/ibtrs/ibtrs-clt.h
create mode 100644 drivers/infiniband/ulp/ibtrs/ibtrs-log.h
create mode 100644 drivers/infiniband/ulp/ibtrs/ibtrs-pri.h
create mode 100644 drivers/infiniband/ulp/ibtrs/ibtrs-srv-stats.c
create mode 100644 drivers/infiniband/ulp/ibtrs/ibtrs-srv-sysfs.c
create mode 100644 drivers/infiniband/ulp/ibtrs/ibtrs-srv.c
create mode 100644 drivers/infiniband/ulp/ibtrs/ibtrs-srv.h
create mode 100644 drivers/infiniband/ulp/ibtrs/ibtrs.c
create mode 100644 drivers/infiniband/ulp/ibtrs/ibtrs.h
Signed-off-by: Roman Pen <roman.penyaev@profitbricks.com>
Cc: Danil Kipnis <danil.kipnis@profitbricks.com>
Cc: Jack Wang <jinpu.wang@profitbricks.com>
--
2.13.1
next reply other threads:[~2018-02-02 14:08 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-02 14:08 Roman Pen [this message]
2018-02-02 14:08 ` [PATCH 01/24] ibtrs: public interface header to establish RDMA connections Roman Pen
2018-02-02 14:08 ` [PATCH 02/24] ibtrs: private headers with IBTRS protocol structs and helpers Roman Pen
2018-02-02 14:08 ` [PATCH 03/24] ibtrs: core: lib functions shared between client and server modules Roman Pen
2018-02-05 10:52 ` Sagi Grimberg
2018-02-06 12:01 ` Roman Penyaev
2018-02-06 16:10 ` Jason Gunthorpe
2018-02-07 10:34 ` Roman Penyaev
2018-02-02 14:08 ` [PATCH 04/24] ibtrs: client: private header with client structs and functions Roman Pen
2018-02-05 10:59 ` Sagi Grimberg
2018-02-06 12:23 ` Roman Penyaev
2018-02-02 14:08 ` [PATCH 05/24] ibtrs: client: main functionality Roman Pen
2018-02-02 16:54 ` Bart Van Assche
2018-02-05 13:27 ` Roman Penyaev
2018-02-05 14:14 ` Sagi Grimberg
2018-02-05 17:05 ` Roman Penyaev
2018-02-05 11:19 ` Sagi Grimberg
2018-02-05 14:19 ` Roman Penyaev
2018-02-05 16:24 ` Bart Van Assche
2018-02-02 14:08 ` [PATCH 06/24] ibtrs: client: statistics functions Roman Pen
2018-02-02 14:08 ` [PATCH 07/24] ibtrs: client: sysfs interface functions Roman Pen
2018-02-05 11:20 ` Sagi Grimberg
2018-02-06 12:28 ` Roman Penyaev
2018-02-02 14:08 ` [PATCH 08/24] ibtrs: server: private header with server structs and functions Roman Pen
2018-02-02 14:08 ` [PATCH 09/24] ibtrs: server: main functionality Roman Pen
2018-02-05 11:29 ` Sagi Grimberg
2018-02-06 12:46 ` Roman Penyaev
2018-02-02 14:08 ` [PATCH 10/24] ibtrs: server: statistics functions Roman Pen
2018-02-02 14:08 ` [PATCH 11/24] ibtrs: server: sysfs interface functions Roman Pen
2018-02-02 14:08 ` [PATCH 12/24] ibtrs: include client and server modules into kernel compilation Roman Pen
2018-02-02 14:08 ` [PATCH 13/24] ibtrs: a bit of documentation Roman Pen
2018-02-02 14:08 ` [PATCH 14/24] ibnbd: private headers with IBNBD protocol structs and helpers Roman Pen
2018-02-02 14:08 ` [PATCH 15/24] ibnbd: client: private header with client structs and functions Roman Pen
2018-02-02 14:08 ` [PATCH 16/24] ibnbd: client: main functionality Roman Pen
2018-02-02 15:11 ` Jens Axboe
2018-02-05 12:54 ` Roman Penyaev
2018-02-02 14:08 ` [PATCH 17/24] ibnbd: client: sysfs interface functions Roman Pen
2018-02-02 14:08 ` [PATCH 18/24] ibnbd: server: private header with server structs and functions Roman Pen
2018-02-02 14:08 ` [PATCH 19/24] ibnbd: server: main functionality Roman Pen
2018-02-02 14:09 ` [PATCH 20/24] ibnbd: server: functionality for IO submission to file or block dev Roman Pen
2018-02-02 14:09 ` [PATCH 21/24] ibnbd: server: sysfs interface functions Roman Pen
2018-02-02 14:09 ` [PATCH 22/24] ibnbd: include client and server modules into kernel compilation Roman Pen
2018-02-02 14:09 ` [PATCH 23/24] ibnbd: a bit of documentation Roman Pen
2018-02-02 15:55 ` Bart Van Assche
2018-02-05 13:03 ` Roman Penyaev
2018-02-05 14:16 ` Sagi Grimberg
2018-02-02 14:09 ` [PATCH 24/24] MAINTAINERS: Add maintainer for IBNBD/IBTRS modules Roman Pen
2018-02-02 16:07 ` [PATCH 00/24] InfiniBand Transport (IBTRS) and Network Block Device (IBNBD) Bart Van Assche
2018-02-02 16:40 ` Doug Ledford
2018-02-05 8:45 ` Jinpu Wang
2018-06-04 12:14 ` Danil Kipnis
2018-02-02 17:05 ` Bart Van Assche
2018-02-05 8:56 ` Jinpu Wang
2018-02-05 11:36 ` Sagi Grimberg
2018-02-05 13:38 ` Danil Kipnis
2018-02-05 14:17 ` Sagi Grimberg
2018-02-05 16:40 ` Danil Kipnis
2018-02-05 18:38 ` Bart Van Assche
2018-02-06 9:44 ` Danil Kipnis
2018-02-06 15:35 ` Bart Van Assche
2018-02-05 16:16 ` Bart Van Assche
2018-02-05 16:36 ` Jinpu Wang
2018-02-07 16:35 ` Christopher Lameter
2018-02-07 17:18 ` Roman Penyaev
2018-02-07 17:32 ` Bart Van Assche
2018-02-08 17:38 ` Danil Kipnis
2018-02-08 18:09 ` Bart Van Assche
2018-06-04 12:27 ` Danil Kipnis
2018-02-05 12:16 ` Sagi Grimberg
2018-02-05 12:30 ` Sagi Grimberg
2018-02-07 13:06 ` Roman Penyaev
2018-02-05 16:58 ` Bart Van Assche
2018-02-05 17:16 ` Roman Penyaev
2018-02-05 17:20 ` Bart Van Assche
2018-02-06 11:47 ` Roman Penyaev
2018-02-06 13:12 ` Roman Penyaev
2018-02-06 16:01 ` Bart Van Assche
2018-02-07 12:57 ` Roman Penyaev
2018-02-07 16:35 ` Bart Van Assche
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180202140904.2017-1-roman.penyaev@profitbricks.com \
--to=roman.penyaev@profitbricks.com \
--cc=axboe@kernel.dk \
--cc=bart.vanassche@sandisk.com \
--cc=danil.kipnis@profitbricks.com \
--cc=hch@infradead.org \
--cc=jinpu.wang@profitbricks.com \
--cc=linux-block@vger.kernel.org \
--cc=linux-rdma@vger.kernel.org \
--cc=ogerlitz@mellanox.com \
--cc=sagi@grimberg.me \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).