linux-block.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Christoph Hellwig <hch@lst.de>
To: linux-xfs@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org, linux-block@vger.kernel.org,
	linux-mm@kvack.org
Subject: [PATCH 33/34] xfs: do not set the page uptodate in xfs_writepage_map
Date: Fri, 18 May 2018 18:48:29 +0200	[thread overview]
Message-ID: <20180518164830.1552-34-hch@lst.de> (raw)
In-Reply-To: <20180518164830.1552-1-hch@lst.de>

We already track the page uptodate status based on the buffer uptodate
status, which is updated whenever reading or zeroing blocks.

This code has been there since commit a ptool commit in 2002, which
claims to:

    "merge" the 2.4 fsx fix for block size < page size to 2.5.  This needed
    major changes to actually fit.

and isn't present in other writepage implementations.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 fs/xfs/xfs_aops.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/fs/xfs/xfs_aops.c b/fs/xfs/xfs_aops.c
index a4e53e0a57c2..492f4a4b1deb 100644
--- a/fs/xfs/xfs_aops.c
+++ b/fs/xfs/xfs_aops.c
@@ -796,7 +796,6 @@ xfs_writepage_map(
 	ssize_t			len = i_blocksize(inode);
 	int			error = 0;
 	int			count = 0;
-	bool			uptodate = true;
 	loff_t			file_offset;	/* file offset of page */
 	unsigned		poffset;	/* offset into page */
 
@@ -823,7 +822,6 @@ xfs_writepage_map(
 		if (!buffer_uptodate(bh)) {
 			if (PageUptodate(page))
 				ASSERT(buffer_mapped(bh));
-			uptodate = false;
 			continue;
 		}
 
@@ -857,9 +855,6 @@ xfs_writepage_map(
 		count++;
 	}
 
-	if (uptodate && poffset == PAGE_SIZE)
-		SetPageUptodate(page);
-
 	ASSERT(wpc->ioend || list_empty(&submit_list));
 
 out:
-- 
2.17.0

  parent reply	other threads:[~2018-05-18 16:50 UTC|newest]

Thread overview: 49+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-18 16:47 buffered I/O without buffer heads in xfs and iomap v2 Christoph Hellwig
2018-05-18 16:47 ` [PATCH 01/34] block: add a lower-level bio_add_page interface Christoph Hellwig
2018-05-18 16:56   ` Jens Axboe
2018-05-18 16:47 ` [PATCH 02/34] fs: factor out a __generic_write_end helper Christoph Hellwig
2018-05-18 16:47 ` [PATCH 03/34] fs: move page_cache_seek_hole_data to iomap.c Christoph Hellwig
2018-05-18 16:48 ` [PATCH 04/34] fs: remove the buffer_unwritten check in page_seek_hole_data Christoph Hellwig
2018-05-18 16:48 ` [PATCH 05/34] fs: use ->is_partially_uptodate in page_cache_seek_hole_data Christoph Hellwig
2018-05-21 19:53   ` Darrick J. Wong
2018-05-22  7:56     ` Christoph Hellwig
2018-05-18 16:48 ` [PATCH 06/34] mm: give the 'ret' variable a better name __do_page_cache_readahead Christoph Hellwig
2018-05-18 16:48 ` [PATCH 07/34] mm: return an unsigned int from __do_page_cache_readahead Christoph Hellwig
2018-05-18 16:48 ` [PATCH 08/34] mm: split ->readpages calls to avoid non-contiguous pages lists Christoph Hellwig
2018-05-22 14:52   ` Brian Foster
2018-05-18 16:48 ` [PATCH 09/34] iomap: inline data should be an iomap type, not a flag Christoph Hellwig
2018-05-18 16:48 ` [PATCH 10/34] iomap: fix the comment describing IOMAP_NOWAIT Christoph Hellwig
2018-05-18 16:48 ` [PATCH 11/34] iomap: move IOMAP_F_BOUNDARY to gfs2 Christoph Hellwig
2018-05-18 16:48 ` [PATCH 12/34] iomap: use __bio_add_page in iomap_dio_zero Christoph Hellwig
2018-05-18 16:48 ` [PATCH 13/34] iomap: add a iomap_sector helper Christoph Hellwig
2018-05-18 16:48 ` [PATCH 14/34] iomap: add an iomap-based bmap implementation Christoph Hellwig
2018-05-18 16:48 ` [PATCH 15/34] iomap: add an iomap-based readpage and readpages implementation Christoph Hellwig
2018-05-18 16:48 ` [PATCH 16/34] iomap: add initial support for writes without buffer heads Christoph Hellwig
2018-05-21 23:27   ` Darrick J. Wong
2018-05-22  0:07     ` Dave Chinner
2018-05-22  8:24       ` Christoph Hellwig
2018-05-22 22:38         ` Dave Chinner
2018-05-23  6:03           ` Christoph Hellwig
2018-05-22  8:20     ` Christoph Hellwig
2018-05-22  8:31     ` Christoph Hellwig
2018-05-22  9:39       ` Christoph Hellwig
2018-05-18 16:48 ` [PATCH 17/34] xfs: use iomap_bmap Christoph Hellwig
2018-05-18 16:48 ` [PATCH 18/34] xfs: use iomap for blocksize == PAGE_SIZE readpage and readpages Christoph Hellwig
2018-05-18 16:48 ` [PATCH 19/34] xfs: simplify xfs_bmap_punch_delalloc_range Christoph Hellwig
2018-05-18 16:48 ` [PATCH 20/34] xfs: simplify xfs_aops_discard_page Christoph Hellwig
2018-05-18 16:48 ` [PATCH 21/34] xfs: move locking into xfs_bmap_punch_delalloc_range Christoph Hellwig
2018-05-18 16:48 ` [PATCH 22/34] xfs: make xfs_writepage_map extent map centric Christoph Hellwig
2018-05-18 16:48 ` [PATCH 23/34] xfs: remove the now unused XFS_BMAPI_IGSTATE flag Christoph Hellwig
2018-05-18 16:48 ` [PATCH 24/34] xfs: remove xfs_reflink_find_cow_mapping Christoph Hellwig
2018-05-18 16:48 ` [PATCH 25/34] xfs: remove xfs_reflink_trim_irec_to_next_cow Christoph Hellwig
2018-05-18 16:48 ` [PATCH 26/34] xfs: simplify xfs_map_blocks by using xfs_iext_lookup_extent directly Christoph Hellwig
2018-05-18 16:48 ` [PATCH 27/34] xfs: don't clear imap_valid for a non-uptodate buffers Christoph Hellwig
2018-05-18 16:48 ` [PATCH 28/34] xfs: remove the imap_valid flag Christoph Hellwig
2018-05-18 16:48 ` [PATCH 29/34] xfs: don't look at buffer heads in xfs_add_to_ioend Christoph Hellwig
2018-05-18 16:48 ` [PATCH 30/34] xfs: move all writeback buffer_head manipulation into xfs_map_at_offset Christoph Hellwig
2018-05-18 16:48 ` [PATCH 31/34] xfs: remove xfs_start_page_writeback Christoph Hellwig
2018-05-18 16:48 ` [PATCH 32/34] xfs: refactor the tail of xfs_writepage_map Christoph Hellwig
2018-05-18 16:48 ` Christoph Hellwig [this message]
2018-05-18 16:48 ` [PATCH 34/34] xfs: allow writeback on pages without buffer heads Christoph Hellwig
2018-05-21 20:46 ` buffered I/O without buffer heads in xfs and iomap v2 Darrick J. Wong
2018-05-22 20:33   ` Christoph Hellwig

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180518164830.1552-34-hch@lst.de \
    --to=hch@lst.de \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=linux-xfs@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).