Linux-Block Archive on lore.kernel.org
 help / color / Atom feed
From: Jens Axboe <axboe@kernel.dk>
To: linux-fsdevel@vger.kernel.org, linux-aio@kvack.org,
	linux-block@vger.kernel.org, linux-arch@vger.kernel.org
Cc: hch@lst.de, jmoyer@redhat.com, avi@scylladb.com
Subject: [PATCHSET v2] io_uring IO interface
Date: Wed,  9 Jan 2019 19:43:49 -0700
Message-ID: <20190110024404.25372-1-axboe@kernel.dk> (raw)

Here's v2 of the io_uring interface. See the v1 posting for some more info:

https://lore.kernel.org/linux-block/20190108165645.19311-1-axboe@kernel.dk/

The data structures changed, to improve the symmetry of the submission
and completion side. The io_uring_iocb is now io_uring_sqe, but it
otherwise remains the same as before. Ditto on the completion side,
where io_uring_event is now io_uring_cqe.

I've updated the fio io_uring test app, and the io_uring engine. The
liburing git repo has also been adapted to the various changes since the
v1 posting. As a reminder, the liburing git repo contains some helpers
for doing IO without having to muck with the ring directly, setting up
an io_uring context, etc. Clone that here:

git://git.kernel.dk/liburing

In terms of usage, there's also a small test app here:

http://git.kernel.dk/cgit/fio/plain/t/io_uring.c

and the liburing repo has a few test apps in test/ as well.

Patches are aginst 5.0-rc1, but can also be found here:

git://git.kernel.dk/linux-block io_uring

Changes since v1:

- Fail IORING_OP_{READ,WRITE}_FIXED if not configured
- Fix ctx drop ref issue on failure to close ring_fd when sq thread/wq
  are in use
- Move to separate Kconfig entry (CONFIG_IO_URING)
- Add SPDX headers
- Drop gcc ism of zero sized arrays
- Rename io_uring_iocb -> io_uring_sqe
- Rename io_uring_event -> io_uring_cqe
- Drop needless io_event_ring and io_iocb_ring structures
- Drop ctx->max_reqs, use ->sq_entries
- Drop unused ->ring_lock
- Drop io_ring_ctx slab cache
- Fix state batched kiocb alloc failure to put ctx
- Fix missing write ordering barrier when filling in the cqe
- Drop io_req_init()
- Various renames
- Fix a few lines that were too long
- Address other minor review comments
- Fix IORING_SETUP_SQPOLL being set without IORING_SETUP_SQTHREAD
- Drop IORING_SETUP_FIXEDBUFS, iovecs being non-NULL is enough
- Fix error handling free of ctx in setup path
- Change standard read/write commands to be iov based READV/WRITEV
- Pass in struct sqe_submit instead of separate sqe/index everywhere
- Fix reap of polled events on fops->release()
- Lock uring for sq thread polling
- Don't grab ->completion_lock for polled IO cqe filling
- Fix ev_flags vs flags typo
- Consolidate parts of the io_ring_ctx alignment

 Documentation/filesystems/vfs.txt      |    3 +
 arch/x86/entry/syscalls/syscall_64.tbl |    2 +
 block/bio.c                            |   59 +-
 fs/Makefile                            |    1 +
 fs/block_dev.c                         |   19 +-
 fs/file.c                              |   15 +-
 fs/file_table.c                        |    9 +-
 fs/gfs2/file.c                         |    2 +
 fs/io_uring.c                          | 1890 ++++++++++++++++++++++++
 fs/iomap.c                             |   48 +-
 fs/xfs/xfs_file.c                      |    1 +
 include/linux/bio.h                    |   14 +
 include/linux/blk_types.h              |    1 +
 include/linux/file.h                   |    2 +
 include/linux/fs.h                     |    6 +-
 include/linux/iomap.h                  |    1 +
 include/linux/syscalls.h               |    5 +
 include/uapi/linux/io_uring.h          |  114 ++
 init/Kconfig                           |    8 +
 kernel/sys_ni.c                        |    2 +
 20 files changed, 2163 insertions(+), 39 deletions(-)

-- 
Jens Axboe



             reply index

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-10  2:43 Jens Axboe [this message]
2019-01-10  2:43 ` [PATCH 01/15] fs: add an iopoll method to struct file_operations Jens Axboe
2019-01-10  2:43 ` [PATCH 02/15] block: wire up block device iopoll method Jens Axboe
2019-01-10  2:43 ` [PATCH 03/15] block: add bio_set_polled() helper Jens Axboe
2019-01-10  2:43 ` [PATCH 04/15] iomap: wire up the iopoll method Jens Axboe
2019-01-10  2:43 ` [PATCH 05/15] Add io_uring IO interface Jens Axboe
2019-01-11 18:19   ` Martin K. Petersen
2019-01-11 18:34     ` Jens Axboe
2019-01-13 16:22       ` Jens Axboe
2019-01-15 17:31         ` Martin K. Petersen
2019-01-10  2:43 ` [PATCH 06/15] io_uring: support for IO polling Jens Axboe
2019-01-10  2:43 ` [PATCH 07/15] io_uring: add submission side request cache Jens Axboe
2019-01-10  2:43 ` [PATCH 08/15] fs: add fget_many() and fput_many() Jens Axboe
2019-01-10  2:43 ` [PATCH 09/15] io_uring: use fget/fput_many() for file references Jens Axboe
2019-01-10  2:43 ` [PATCH 10/15] io_uring: batch io_kiocb allocation Jens Axboe
2019-01-10  2:44 ` [PATCH 11/15] block: implement bio helper to add iter bvec pages to bio Jens Axboe
2019-01-10  2:44 ` [PATCH 12/15] io_uring: add support for pre-mapped user IO buffers Jens Axboe
2019-01-10  2:44 ` [PATCH 13/15] io_uring: support kernel side submission Jens Axboe
2019-01-10  2:44 ` [PATCH 14/15] io_uring: add submission polling Jens Axboe
2019-01-10  2:44 ` [PATCH 15/15] io_uring: add io_uring_event cache hit information Jens Axboe
2019-01-10 23:12   ` Jeff Moyer
2019-01-10 23:47     ` Jens Axboe
2019-01-11  9:46 ` [PATCHSET v2] io_uring IO interface Roman Penyaev
2019-01-11 16:11   ` Ilya Dryomov
2019-01-11 16:21     ` Christoph Hellwig
2019-01-11 16:39     ` Roman Penyaev
2019-01-11 18:05   ` Jens Axboe

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190110024404.25372-1-axboe@kernel.dk \
    --to=axboe@kernel.dk \
    --cc=avi@scylladb.com \
    --cc=hch@lst.de \
    --cc=jmoyer@redhat.com \
    --cc=linux-aio@kvack.org \
    --cc=linux-arch@vger.kernel.org \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-fsdevel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Block Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-block/0 linux-block/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-block linux-block/ https://lore.kernel.org/linux-block \
		linux-block@vger.kernel.org
	public-inbox-index linux-block

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-block


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git