linux-block.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Johannes Thumshirn <johannes.thumshirn@wdc.com>
To: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@infradead.org>,
	linux-block <linux-block@vger.kernel.org>,
	Damien Le Moal <Damien.LeMoal@wdc.com>,
	Keith Busch <kbusch@kernel.org>,
	"linux-scsi @ vger . kernel . org" <linux-scsi@vger.kernel.org>,
	"Martin K . Petersen" <martin.petersen@oracle.com>,
	"linux-fsdevel @ vger . kernel . org"
	<linux-fsdevel@vger.kernel.org>,
	Johannes Thumshirn <johannes.thumshirn@wdc.com>
Subject: [PATCH v4 07/10] scsi: sd_zbc: emulate ZONE_APPEND commands
Date: Fri,  3 Apr 2020 19:12:47 +0900	[thread overview]
Message-ID: <20200403101250.33245-8-johannes.thumshirn@wdc.com> (raw)
In-Reply-To: <20200403101250.33245-1-johannes.thumshirn@wdc.com>

Emulate ZONE_APPEND for SCSI disks using a regular WRITE(16) with a
start LBA set to the target zone write pointer position.

In order to always know the write pointer position of a sequential write
zone, the queue flag QUEUE_FLAG_ZONE_WP_OFST is set to get an
initialized write pointer offset array attached to the device request
queue. The values of the cache are maintained in sync with the device
as follows:
1) the write pointer offset of a zone is reset to 0 when a
   REQ_OP_ZONE_RESET command completes.
2) the write pointer offset of a zone is set to the zone size when a
   REQ_OP_ZONE_FINISH command completes.
3) the write pointer offset of a zone is incremented by the number of
   512B sectors written when a write or a zone append command completes
4) the write pointer offset of all zones is reset to 0 when a
   REQ_OP_ZONE_RESET_ALL command completes.

Since the block layer does not write lock zones for zone append
commands, to ensure a sequential ordering of the write commands used for
the emulation, the target zone of a zone append command is locked when
the function sd_zbc_prepare_zone_append() is called from
sd_setup_read_write_cmnd(). If the zone write lock cannot be obtained
(e.g. a zone append is in-flight or a regular write has already locked
the zone), the zone append command dispatching is delayed by returning
BLK_STS_ZONE_RESOURCE.

Since zone reset and finish operations can be issued concurrently with
writes and zone append requests, ensure a coherent update of the zone
write pointer offsets by also write locking the target zones for these
zone management requests.

Finally, to avoid the need for write locking all zones for
REQ_OP_ZONE_RESET_ALL requests, use a spinlock to protect accesses and
modifications of the zone write pointer offsets. This spinlock is
initialized from sd_probe() using the new function sd_zbc_init().

Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
---
 drivers/scsi/sd.c     |  26 ++-
 drivers/scsi/sd.h     |  38 ++++-
 drivers/scsi/sd_zbc.c | 367 +++++++++++++++++++++++++++++++++++++++++-
 3 files changed, 413 insertions(+), 18 deletions(-)

diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 2710a0e5ae6d..569b22ab394e 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1206,6 +1206,14 @@ static blk_status_t sd_setup_read_write_cmnd(struct scsi_cmnd *cmd)
 		}
 	}
 
+	if (req_op(rq) == REQ_OP_ZONE_APPEND) {
+		ret = sd_zbc_prepare_zone_append(cmd, &lba, nr_blocks);
+		if (ret) {
+			scsi_mq_uninit_cmd(cmd);
+			return ret;
+		}
+	}
+
 	fua = rq->cmd_flags & REQ_FUA ? 0x8 : 0;
 	dix = scsi_prot_sg_count(cmd);
 	dif = scsi_host_dif_capable(cmd->device->host, sdkp->protection_type);
@@ -1287,6 +1295,7 @@ static blk_status_t sd_init_command(struct scsi_cmnd *cmd)
 		return sd_setup_flush_cmnd(cmd);
 	case REQ_OP_READ:
 	case REQ_OP_WRITE:
+	case REQ_OP_ZONE_APPEND:
 		return sd_setup_read_write_cmnd(cmd);
 	case REQ_OP_ZONE_RESET:
 		return sd_zbc_setup_zone_mgmt_cmnd(cmd, ZO_RESET_WRITE_POINTER,
@@ -2055,7 +2064,7 @@ static int sd_done(struct scsi_cmnd *SCpnt)
 
  out:
 	if (sd_is_zoned(sdkp))
-		sd_zbc_complete(SCpnt, good_bytes, &sshdr);
+		good_bytes = sd_zbc_complete(SCpnt, good_bytes, &sshdr);
 
 	SCSI_LOG_HLCOMPLETE(1, scmd_printk(KERN_INFO, SCpnt,
 					   "sd_done: completed %d of %d bytes\n",
@@ -3371,6 +3380,10 @@ static int sd_probe(struct device *dev)
 	sdkp->first_scan = 1;
 	sdkp->max_medium_access_timeouts = SD_MAX_MEDIUM_TIMEOUTS;
 
+	error = sd_zbc_init_disk(sdkp);
+	if (error)
+		goto out_free_index;
+
 	sd_revalidate_disk(gd);
 
 	gd->flags = GENHD_FL_EXT_DEVT;
@@ -3408,6 +3421,7 @@ static int sd_probe(struct device *dev)
  out_put:
 	put_disk(gd);
  out_free:
+	sd_zbc_release_disk(sdkp);
 	kfree(sdkp);
  out:
 	scsi_autopm_put_device(sdp);
@@ -3484,6 +3498,8 @@ static void scsi_disk_release(struct device *dev)
 	put_disk(disk);
 	put_device(&sdkp->device->sdev_gendev);
 
+	sd_zbc_release_disk(sdkp);
+
 	kfree(sdkp);
 }
 
@@ -3664,19 +3680,19 @@ static int __init init_sd(void)
 	if (!sd_page_pool) {
 		printk(KERN_ERR "sd: can't init discard page pool\n");
 		err = -ENOMEM;
-		goto err_out_ppool;
+		goto err_out_cdb_pool;
 	}
 
 	err = scsi_register_driver(&sd_template.gendrv);
 	if (err)
-		goto err_out_driver;
+		goto err_out_ppool;
 
 	return 0;
 
-err_out_driver:
+err_out_ppool:
 	mempool_destroy(sd_page_pool);
 
-err_out_ppool:
+err_out_cdb_pool:
 	mempool_destroy(sd_cdb_pool);
 
 err_out_cache:
diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h
index 50fff0bf8c8e..74448c250fea 100644
--- a/drivers/scsi/sd.h
+++ b/drivers/scsi/sd.h
@@ -79,6 +79,10 @@ struct scsi_disk {
 	u32		zones_optimal_open;
 	u32		zones_optimal_nonseq;
 	u32		zones_max_open;
+	u32		*zones_wp_ofst;
+	spinlock_t	zones_wp_ofst_lock;
+	struct work_struct zone_wp_ofst_work;
+	char		*zone_wp_update_buf;
 #endif
 	atomic_t	openers;
 	sector_t	capacity;	/* size in logical blocks */
@@ -207,17 +211,32 @@ static inline int sd_is_zoned(struct scsi_disk *sdkp)
 
 #ifdef CONFIG_BLK_DEV_ZONED
 
+int sd_zbc_init_disk(struct scsi_disk *sdkp);
+void sd_zbc_release_disk(struct scsi_disk *sdkp);
 extern int sd_zbc_read_zones(struct scsi_disk *sdkp, unsigned char *buffer);
 extern void sd_zbc_print_zones(struct scsi_disk *sdkp);
 blk_status_t sd_zbc_setup_zone_mgmt_cmnd(struct scsi_cmnd *cmd,
 					 unsigned char op, bool all);
-extern void sd_zbc_complete(struct scsi_cmnd *cmd, unsigned int good_bytes,
-			    struct scsi_sense_hdr *sshdr);
+unsigned int sd_zbc_complete(struct scsi_cmnd *cmd, unsigned int good_bytes,
+			     struct scsi_sense_hdr *sshdr);
 int sd_zbc_report_zones(struct gendisk *disk, sector_t sector,
 		unsigned int nr_zones, report_zones_cb cb, void *data);
 
+blk_status_t sd_zbc_prepare_zone_append(struct scsi_cmnd *cmd, sector_t *lba,
+				        unsigned int nr_blocks);
+
 #else /* CONFIG_BLK_DEV_ZONED */
 
+static inline int sd_zbc_init(void)
+{
+	return 0;
+}
+
+static inline void sd_zbc_exit(void) {}
+
+static inline void sd_zbc_init_disk(struct scsi_disk *sdkp) {}
+static inline void sd_zbc_release_disk(struct scsi_disk *sdkp) {}
+
 static inline int sd_zbc_read_zones(struct scsi_disk *sdkp,
 				    unsigned char *buf)
 {
@@ -233,9 +252,18 @@ static inline blk_status_t sd_zbc_setup_zone_mgmt_cmnd(struct scsi_cmnd *cmd,
 	return BLK_STS_TARGET;
 }
 
-static inline void sd_zbc_complete(struct scsi_cmnd *cmd,
-				   unsigned int good_bytes,
-				   struct scsi_sense_hdr *sshdr) {}
+static inline unsigned int sd_zbc_complete(struct scsi_cmnd *cmd,
+			unsigned int good_bytes, struct scsi_sense_hdr *sshdr)
+{
+	return 0;
+}
+
+static inline blk_status_t sd_zbc_prepare_zone_append(struct scsi_cmnd *cmd,
+						      sector_t *lba,
+						      unsigned int nr_blocks)
+{
+	return BLK_STS_TARGET;
+}
 
 #define sd_zbc_report_zones NULL
 
diff --git a/drivers/scsi/sd_zbc.c b/drivers/scsi/sd_zbc.c
index ee156fbf3780..49c78040fa84 100644
--- a/drivers/scsi/sd_zbc.c
+++ b/drivers/scsi/sd_zbc.c
@@ -42,6 +42,30 @@ static int sd_zbc_parse_report(struct scsi_disk *sdkp, u8 *buf,
 	return cb(&zone, idx, data);
 }
 
+static unsigned int sd_zbc_get_zone_wp_ofst(struct blk_zone *zone)
+{
+	if (zone->type == ZBC_ZONE_TYPE_CONV)
+		return 0;
+
+	switch (zone->cond) {
+	case BLK_ZONE_COND_IMP_OPEN:
+	case BLK_ZONE_COND_EXP_OPEN:
+	case BLK_ZONE_COND_CLOSED:
+		return zone->wp - zone->start;
+	case BLK_ZONE_COND_FULL:
+		return zone->len;
+	case BLK_ZONE_COND_EMPTY:
+	case BLK_ZONE_COND_OFFLINE:
+	case BLK_ZONE_COND_READONLY:
+	default:
+		/*
+		 * Offline and read-only zones do not have a valid
+		 * write pointer. Use 0 as for an empty zone.
+		 */
+		return 0;
+	}
+}
+
 /**
  * sd_zbc_do_report_zones - Issue a REPORT ZONES scsi command.
  * @sdkp: The target disk
@@ -229,6 +253,134 @@ static blk_status_t sd_zbc_cmnd_checks(struct scsi_cmnd *cmd)
 	return BLK_STS_OK;
 }
 
+#define SD_ZBC_INVALID_WP_OFST	~(0u)
+#define SD_ZBC_UPDATING_WP_OFST	(SD_ZBC_INVALID_WP_OFST - 1)
+
+static int sd_zbc_update_wp_ofst_cb(struct blk_zone *zone, unsigned int idx,
+				    void *data)
+{
+	struct scsi_disk *sdkp = data;
+
+	lockdep_assert_held(&sdkp->zones_wp_ofst_lock);
+
+	sdkp->zones_wp_ofst[idx] = sd_zbc_get_zone_wp_ofst(zone);
+
+	return 0;
+}
+
+static void sd_zbc_update_wp_ofst_workfn(struct work_struct *work)
+{
+	struct scsi_disk *sdkp;
+	unsigned int zno;
+	int ret;
+
+	sdkp = container_of(work, struct scsi_disk, zone_wp_ofst_work);
+
+	spin_lock_bh(&sdkp->zones_wp_ofst_lock);
+	for (zno = 0; zno < sdkp->nr_zones; zno++) {
+		if (sdkp->zones_wp_ofst[zno] != SD_ZBC_UPDATING_WP_OFST)
+			continue;
+
+		spin_unlock_bh(&sdkp->zones_wp_ofst_lock);
+		ret = sd_zbc_do_report_zones(sdkp, sdkp->zone_wp_update_buf,
+					     SD_BUF_SIZE,
+					     zno * sdkp->zone_blocks, true);
+		spin_lock_bh(&sdkp->zones_wp_ofst_lock);
+		if (!ret)
+			sd_zbc_parse_report(sdkp, sdkp->zone_wp_update_buf + 64,
+					    zno, sd_zbc_update_wp_ofst_cb,
+					    sdkp);
+	}
+	spin_unlock_bh(&sdkp->zones_wp_ofst_lock);
+
+	scsi_device_put(sdkp->device);
+}
+
+static blk_status_t sd_zbc_update_wp_ofst(struct scsi_disk *sdkp,
+					  unsigned int zno)
+{
+	/*
+	 * We are about to schedule work to update a zone write pointer offset,
+	 * which will cause the zone append command to be requeued. So make
+	 * sure that the scsi device does not go away while the work is
+	 * being processed.
+	 */
+	if (scsi_device_get(sdkp->device))
+		return BLK_STS_IOERR;
+
+	sdkp->zones_wp_ofst[zno] = SD_ZBC_UPDATING_WP_OFST;
+
+	schedule_work(&sdkp->zone_wp_ofst_work);
+
+	return BLK_STS_RESOURCE;
+}
+
+/**
+ * sd_zbc_prepare_zone_append() - Prepare an emulated ZONE_APPEND command.
+ * @cmd: the command to setup
+ * @lba: the LBA to patch
+ * @nr_blocks: the number of LBAs to be written
+ *
+ * Called from sd_setup_read_write_cmnd() for REQ_OP_ZONE_APPEND.
+ * @sd_zbc_prepare_zone_append() handles the necessary zone wrote locking and
+ * patching of the lba for an emulated ZONE_APPEND command.
+ *
+ * In case the cached write pointer offset is %SD_ZBC_INVALID_WP_OFST it will
+ * schedule a REPORT ZONES command and return BLK_STS_IOERR.
+ */
+blk_status_t sd_zbc_prepare_zone_append(struct scsi_cmnd *cmd, sector_t *lba,
+					unsigned int nr_blocks)
+{
+	struct request *rq = cmd->request;
+	struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
+	unsigned int wp_ofst, zno = blk_rq_zone_no(rq);
+	blk_status_t ret;
+
+	ret = sd_zbc_cmnd_checks(cmd);
+	if (ret != BLK_STS_OK)
+		return ret;
+
+	if (!blk_rq_zone_is_seq(rq))
+		return BLK_STS_IOERR;
+
+	/* Unlock of the write lock will happen in sd_zbc_complete() */
+	if (!blk_req_zone_write_trylock(rq))
+		return BLK_STS_ZONE_RESOURCE;
+
+	spin_lock_bh(&sdkp->zones_wp_ofst_lock);
+
+	wp_ofst = sdkp->zones_wp_ofst[zno];
+	if (wp_ofst == SD_ZBC_UPDATING_WP_OFST) {
+		/* Write pointer offset update in progress: ask for a requeue */
+		ret = BLK_STS_RESOURCE;
+		goto err;
+	}
+
+	if (wp_ofst == SD_ZBC_INVALID_WP_OFST) {
+		/* Invalid write pointer offset: trigger an update from disk */
+		ret = sd_zbc_update_wp_ofst(sdkp, zno);
+		goto err;
+	}
+
+	wp_ofst = sectors_to_logical(sdkp->device, wp_ofst);
+	if (wp_ofst + nr_blocks > sdkp->zone_blocks) {
+		ret = BLK_STS_IOERR;
+		goto err;
+	}
+
+	/* Set the LBA for the write command used to emulate zone append */
+	*lba += wp_ofst;
+
+	spin_unlock_bh(&sdkp->zones_wp_ofst_lock);
+
+	return BLK_STS_OK;
+
+err:
+	spin_unlock_bh(&sdkp->zones_wp_ofst_lock);
+	blk_req_zone_write_unlock(rq);
+	return ret;
+}
+
 /**
  * sd_zbc_setup_zone_mgmt_cmnd - Prepare a zone ZBC_OUT command. The operations
  *			can be RESET WRITE POINTER, OPEN, CLOSE or FINISH.
@@ -266,19 +418,139 @@ blk_status_t sd_zbc_setup_zone_mgmt_cmnd(struct scsi_cmnd *cmd,
 	cmd->transfersize = 0;
 	cmd->allowed = 0;
 
+	/* Only zone reset and zone finish need zone write locking */
+	if (op != ZO_RESET_WRITE_POINTER && op != ZO_FINISH_ZONE)
+		return BLK_STS_OK;
+
+	if (all) {
+		/* We do not write lock all zones for an all zone reset */
+		if (op == ZO_RESET_WRITE_POINTER)
+			return BLK_STS_OK;
+
+		/* Finishing all zones is not supported */
+		return BLK_STS_IOERR;
+	}
+
+	if (!blk_rq_zone_is_seq(rq))
+		return BLK_STS_IOERR;
+
+	if (!blk_req_zone_write_trylock(rq))
+		return BLK_STS_ZONE_RESOURCE;
+
 	return BLK_STS_OK;
 }
 
+static inline bool sd_zbc_zone_needs_write_unlock(struct request *rq)
+{
+	/*
+	 * For zone append, the zone was locked in sd_zbc_prepare_zone_append().
+	 * For zone reset and zone finish, the zone was locked in
+	 * sd_zbc_setup_zone_mgmt_cmnd().
+	 * For regular writes, the zone is unlocked by the block layer elevator.
+	 */
+	return req_op(rq) == REQ_OP_ZONE_APPEND ||
+		req_op(rq) == REQ_OP_ZONE_RESET ||
+		req_op(rq) == REQ_OP_ZONE_FINISH;
+}
+
+static bool sd_zbc_need_zone_wp_update(struct request *rq)
+{
+	switch (req_op(rq)) {
+	case REQ_OP_ZONE_APPEND:
+	case REQ_OP_ZONE_FINISH:
+	case REQ_OP_ZONE_RESET:
+	case REQ_OP_ZONE_RESET_ALL:
+		return true;
+	case REQ_OP_WRITE:
+	case REQ_OP_WRITE_ZEROES:
+	case REQ_OP_WRITE_SAME:
+		return blk_rq_zone_is_seq(rq);
+	default:
+		return false;
+	}
+}
+
+/**
+ * sd_zbc_zone_wp_update - Update cached zone write pointer upon cmd completion
+ * @cmd: Completed command
+ * @good_bytes: Command reply bytes
+ *
+ * Called from sd_zbc_complete() to handle the update of the cached zone write
+ * pointer value in case an update is needed.
+ */
+static unsigned int sd_zbc_zone_wp_update(struct scsi_cmnd *cmd,
+					  unsigned int good_bytes)
+{
+	int result = cmd->result;
+	struct request *rq = cmd->request;
+	struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
+	unsigned int zno = blk_rq_zone_no(rq);
+	enum req_opf op = req_op(rq);
+
+	/*
+	 * If we got an error for a command that needs updating the write
+	 * pointer offset cache, we must mark the zone wp offset entry as
+	 * invalid to force an update from disk the next time a zone append
+	 * command is issued.
+	 */
+	spin_lock_bh(&sdkp->zones_wp_ofst_lock);
+
+	if (result && op != REQ_OP_ZONE_RESET_ALL) {
+		if (op == REQ_OP_ZONE_APPEND) {
+			/* Force complete completion (no retry) */
+			good_bytes = 0;
+			scsi_set_resid(cmd, blk_rq_bytes(rq));
+		}
+
+		/*
+		 * Force an update of the zone write pointer offset on
+		 * the next zone append access.
+		 */
+		if (sdkp->zones_wp_ofst[zno] != SD_ZBC_UPDATING_WP_OFST)
+			sdkp->zones_wp_ofst[zno] = SD_ZBC_INVALID_WP_OFST;
+		goto unlock_wp_ofst;
+	}
+
+	switch (op) {
+	case REQ_OP_ZONE_APPEND:
+		rq->__sector += sdkp->zones_wp_ofst[zno];
+		/* fallthrough */
+	case REQ_OP_WRITE_ZEROES:
+	case REQ_OP_WRITE_SAME:
+	case REQ_OP_WRITE:
+		if (sdkp->zones_wp_ofst[zno] < sd_zbc_zone_sectors(sdkp))
+			sdkp->zones_wp_ofst[zno] += good_bytes >> SECTOR_SHIFT;
+		break;
+	case REQ_OP_ZONE_RESET:
+		sdkp->zones_wp_ofst[zno] = 0;
+		break;
+	case REQ_OP_ZONE_FINISH:
+		sdkp->zones_wp_ofst[zno] = sd_zbc_zone_sectors(sdkp);
+		break;
+	case REQ_OP_ZONE_RESET_ALL:
+		memset(sdkp->zones_wp_ofst, 0,
+		       sdkp->nr_zones * sizeof(unsigned int));
+		break;
+	default:
+		break;
+	}
+
+unlock_wp_ofst:
+	spin_unlock_bh(&sdkp->zones_wp_ofst_lock);
+
+	return good_bytes;
+}
+
 /**
  * sd_zbc_complete - ZBC command post processing.
  * @cmd: Completed command
  * @good_bytes: Command reply bytes
  * @sshdr: command sense header
  *
- * Called from sd_done(). Process report zones reply and handle reset zone
- * and write commands errors.
+ * Called from sd_done() to handle zone commands errors and updates to the
+ * device queue zone write pointer offset cahce.
  */
-void sd_zbc_complete(struct scsi_cmnd *cmd, unsigned int good_bytes,
+unsigned int sd_zbc_complete(struct scsi_cmnd *cmd, unsigned int good_bytes,
 		     struct scsi_sense_hdr *sshdr)
 {
 	int result = cmd->result;
@@ -294,7 +566,18 @@ void sd_zbc_complete(struct scsi_cmnd *cmd, unsigned int good_bytes,
 		 * so be quiet about the error.
 		 */
 		rq->rq_flags |= RQF_QUIET;
+		goto unlock_zone;
 	}
+
+	if (sd_zbc_need_zone_wp_update(rq))
+		good_bytes = sd_zbc_zone_wp_update(cmd, good_bytes);
+
+
+unlock_zone:
+	if (sd_zbc_zone_needs_write_unlock(rq))
+		blk_req_zone_write_unlock(rq);
+
+	return good_bytes;
 }
 
 /**
@@ -396,11 +679,52 @@ static int sd_zbc_check_capacity(struct scsi_disk *sdkp, unsigned char *buf,
 	return 0;
 }
 
+struct sd_zbc_revalidate_zone_args {
+	struct scsi_disk	*sdkp;
+	u32			*zones_wp_ofst;
+};
+
+static void sd_zbc_revalidate_zones_cb(struct blk_zone *zone, unsigned int idx,
+				       void *data)
+{
+	struct sd_zbc_revalidate_zone_args *args = data;
+	struct scsi_disk *sdkp = args->sdkp;
+
+	if (zone) {
+		args->zones_wp_ofst[idx] = sd_zbc_get_zone_wp_ofst(zone);
+		return;
+	}
+
+	/* Final call: apply change */
+	swap(sdkp->zones_wp_ofst, args->zones_wp_ofst);
+}
+
+static int sd_zbc_revalidate_zones(struct scsi_disk *sdkp,
+				   unsigned int nr_zones)
+{
+	struct sd_zbc_revalidate_zone_args args = {
+		.sdkp = sdkp,
+	};
+	int ret;
+
+	args.zones_wp_ofst = kvcalloc(nr_zones, sizeof(u32), GFP_NOIO);
+	if (!args.zones_wp_ofst)
+		return -ENOMEM;
+
+	ret = __blk_revalidate_disk_zones(sdkp->disk,
+					  sd_zbc_revalidate_zones_cb, &args);
+	kvfree(args.zones_wp_ofst);
+
+	return ret;
+}
+
 int sd_zbc_read_zones(struct scsi_disk *sdkp, unsigned char *buf)
 {
 	struct gendisk *disk = sdkp->disk;
+	struct request_queue *q = disk->queue;
 	unsigned int nr_zones;
 	u32 zone_blocks = 0;
+	u32 max_append;
 	int ret;
 
 	if (!sd_is_zoned(sdkp))
@@ -420,10 +744,14 @@ int sd_zbc_read_zones(struct scsi_disk *sdkp, unsigned char *buf)
 	if (ret != 0)
 		goto err;
 
+	max_append = min_t(u32, logical_to_sectors(sdkp->device, zone_blocks),
+			   q->limits.max_segments << (PAGE_SHIFT - 9));
+	max_append = min_t(u32, max_append, queue_max_hw_sectors(q));
+
 	/* The drive satisfies the kernel restrictions: set it up */
-	blk_queue_flag_set(QUEUE_FLAG_ZONE_RESETALL, sdkp->disk->queue);
-	blk_queue_required_elevator_features(sdkp->disk->queue,
-					     ELEVATOR_F_ZBD_SEQ_WRITE);
+	blk_queue_flag_set(QUEUE_FLAG_ZONE_RESETALL, q);
+	blk_queue_required_elevator_features(q, ELEVATOR_F_ZBD_SEQ_WRITE);
+	blk_queue_max_zone_append_sectors(q, max_append);
 	nr_zones = round_up(sdkp->capacity, zone_blocks) >> ilog2(zone_blocks);
 
 	/* READ16/WRITE16 is mandatory for ZBC disks */
@@ -443,8 +771,8 @@ int sd_zbc_read_zones(struct scsi_disk *sdkp, unsigned char *buf)
 
 	if (sdkp->zone_blocks != zone_blocks ||
 	    sdkp->nr_zones != nr_zones ||
-	    disk->queue->nr_zones != nr_zones) {
-		ret = blk_revalidate_disk_zones(disk);
+	    q->nr_zones != nr_zones) {
+		ret = sd_zbc_revalidate_zones(sdkp, nr_zones);
 		if (ret != 0)
 			goto err;
 		sdkp->zone_blocks = zone_blocks;
@@ -475,3 +803,26 @@ void sd_zbc_print_zones(struct scsi_disk *sdkp)
 			  sdkp->nr_zones,
 			  sdkp->zone_blocks);
 }
+
+int sd_zbc_init_disk(struct scsi_disk *sdkp)
+{
+	if (!sd_is_zoned(sdkp))
+		return 0;
+
+	sdkp->zones_wp_ofst = NULL;
+	spin_lock_init(&sdkp->zones_wp_ofst_lock);
+	INIT_WORK(&sdkp->zone_wp_ofst_work, sd_zbc_update_wp_ofst_workfn);
+	sdkp->zone_wp_update_buf = kzalloc(SD_BUF_SIZE, GFP_KERNEL);
+	if (!sdkp->zone_wp_update_buf)
+		return -ENOMEM;
+
+	return 0;
+}
+
+void sd_zbc_release_disk(struct scsi_disk *sdkp)
+{
+	kvfree(sdkp->zones_wp_ofst);
+	sdkp->zones_wp_ofst = NULL;
+	kfree(sdkp->zone_wp_update_buf);
+	sdkp->zone_wp_update_buf = NULL;
+}
-- 
2.24.1


  parent reply	other threads:[~2020-04-03 10:13 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-03 10:12 [PATCH v4 00/10] Introduce Zone Append for writing to zoned block devices Johannes Thumshirn
2020-04-03 10:12 ` [PATCH v4 01/10] block: provide fallbacks for blk_queue_zone_is_seq and blk_queue_zone_no Johannes Thumshirn
2020-04-03 10:12 ` [PATCH v4 02/10] block: Introduce REQ_OP_ZONE_APPEND Johannes Thumshirn
2020-04-07 16:48   ` Christoph Hellwig
2020-04-08 11:31     ` Johannes Thumshirn
2020-04-08 15:51   ` Christoph Hellwig
2020-04-08 15:53     ` Johannes Thumshirn
2020-04-03 10:12 ` [PATCH v4 03/10] block: introduce blk_req_zone_write_trylock Johannes Thumshirn
2020-04-07 16:53   ` Christoph Hellwig
2020-04-07 16:54     ` Christoph Hellwig
2020-04-08  8:29     ` [PATCH v4 04/10] block: Modify revalidate zones Damien Le Moal
2020-04-08 15:58       ` hch
2020-04-03 10:12 ` Johannes Thumshirn
2020-04-03 10:12 ` [PATCH v4 05/10] scsi: sd_zbc: factor out sanity checks for zoned commands Johannes Thumshirn
2020-04-03 10:12 ` [PATCH v4 06/10] scsi: export scsi_mq_uninit_cmnd Johannes Thumshirn
2020-04-07 17:00   ` Christoph Hellwig
2020-04-08 11:32     ` Johannes Thumshirn
2020-04-08 15:59       ` hch
2020-04-03 10:12 ` Johannes Thumshirn [this message]
2020-04-07 17:05   ` [PATCH v4 07/10] scsi: sd_zbc: emulate ZONE_APPEND commands Christoph Hellwig
2020-04-08  8:14     ` Damien Le Moal
2020-04-08 15:58       ` hch
2020-04-08 16:13         ` Johannes Thumshirn
2020-04-03 10:12 ` [PATCH v4 08/10] null_blk: Support REQ_OP_ZONE_APPEND Johannes Thumshirn
2020-04-07 17:05   ` Christoph Hellwig
2020-04-03 10:12 ` [PATCH v4 09/10] block: export bio_release_pages and bio_iov_iter_get_pages Johannes Thumshirn
2020-04-03 10:12 ` [PATCH v4 10/10] zonefs: use REQ_OP_ZONE_APPEND for sync DIO Johannes Thumshirn
2020-04-07 16:49 ` [PATCH v4 00/10] Introduce Zone Append for writing to zoned block devices Christoph Hellwig
2020-04-08  8:28   ` Johannes Thumshirn

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200403101250.33245-8-johannes.thumshirn@wdc.com \
    --to=johannes.thumshirn@wdc.com \
    --cc=Damien.LeMoal@wdc.com \
    --cc=axboe@kernel.dk \
    --cc=hch@infradead.org \
    --cc=kbusch@kernel.org \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).