From: Martijn Coenen <maco@android.com>
To: axboe@kernel.dk, hch@lst.de, ming.lei@redhat.com
Cc: narayan@google.com, zezeozue@google.com, kernel-team@android.com,
maco@google.com, bvanassche@acm.org, Chaitanya.Kulkarni@wdc.com,
jaegeuk@kernel.org, linux-block@vger.kernel.org,
linux-kernel@vger.kernel.org, Martijn Coenen <maco@android.com>,
Linux API <linux-api@vger.kernel.org>
Subject: [PATCH v4 10/10] loop: Add LOOP_CONFIGURE ioctl
Date: Wed, 29 Apr 2020 16:03:41 +0200 [thread overview]
Message-ID: <20200429140341.13294-11-maco@android.com> (raw)
In-Reply-To: <20200429140341.13294-1-maco@android.com>
This allows userspace to completely setup a loop device with a single
ioctl, removing the in-between state where the device can be partially
configured - eg the loop device has a backing file associated with it,
but is reading from the wrong offset.
Besides removing the intermediate state, another big benefit of this
ioctl is that LOOP_SET_STATUS can be slow; the main reason for this
slowness is that LOOP_SET_STATUS(64) calls blk_mq_freeze_queue() to
freeze the associated queue; this requires waiting for RCU
synchronization, which I've measured can take about 15-20ms on this
device on average.
In addition to doing what LOOP_SET_STATUS can do, LOOP_CONFIGURE can
also be used to:
- Set the correct block size immediately by setting
loop_config.block_size (avoids LOOP_SET_BLOCK_SIZE)
- Explicitly request direct I/O mode by setting LO_FLAGS_DIRECT_IO
in loop_config.info.lo_flags (avoids LOOP_SET_DIRECT_IO)
- Explicitly request read-only mode by setting LO_FLAGS_READ_ONLY
in loop_config.info.lo_flags
Here's setting up ~70 regular loop devices with an offset on an x86
Android device, using LOOP_SET_FD and LOOP_SET_STATUS:
vsoc_x86:/system/apex # time for i in `seq 30 100`;
do losetup -r -o 4096 /dev/block/loop$i com.android.adbd.apex; done
0m03.40s real 0m00.02s user 0m00.03s system
Here's configuring ~70 devices in the same way, but using a modified
losetup that uses the new LOOP_CONFIGURE ioctl:
vsoc_x86:/system/apex # time for i in `seq 30 100`;
do losetup -r -o 4096 /dev/block/loop$i com.android.adbd.apex; done
0m01.94s real 0m00.01s user 0m00.01s system
Signed-off-by: Martijn Coenen <maco@android.com>
---
drivers/block/loop.c | 107 +++++++++++++++++++++++++++-----------
include/uapi/linux/loop.h | 21 ++++++++
2 files changed, 99 insertions(+), 29 deletions(-)
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index cfbdd99fdb1a..a353ce55fd18 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -241,6 +241,19 @@ loop_validate_size(loff_t size)
return 0;
}
+/**
+ * loop_validate_block_size() - validates the passed in block size
+ * @bsize: size to validate
+ */
+static int
+loop_validate_block_size(unsigned short bsize)
+{
+ if (bsize < 512 || bsize > PAGE_SIZE || !is_power_of_2(bsize))
+ return -EINVAL;
+
+ return 0;
+}
+
/**
* loop_set_size() - sets device size and notifies userspace
* @lo: struct loop_device to set the size for
@@ -1063,23 +1076,24 @@ loop_set_status_from_info(struct loop_device *lo,
return 0;
}
-static int loop_set_fd(struct loop_device *lo, fmode_t mode,
- struct block_device *bdev, unsigned int arg)
+static int loop_configure(struct loop_device *lo, fmode_t mode,
+ struct block_device *bdev,
+ const struct loop_config *config)
{
struct file *file;
struct inode *inode;
struct address_space *mapping;
struct block_device *claimed_bdev = NULL;
- int lo_flags = 0;
int error;
loff_t size;
bool partscan;
+ unsigned short bsize;
/* This is safe, since we have a reference from open(). */
__module_get(THIS_MODULE);
error = -EBADF;
- file = fget(arg);
+ file = fget(config->fd);
if (!file)
goto out;
@@ -1088,7 +1102,7 @@ static int loop_set_fd(struct loop_device *lo, fmode_t mode,
* here to avoid changing device under exclusive owner.
*/
if (!(mode & FMODE_EXCL)) {
- claimed_bdev = bd_start_claiming(bdev, loop_set_fd);
+ claimed_bdev = bd_start_claiming(bdev, loop_configure);
if (IS_ERR(claimed_bdev)) {
error = PTR_ERR(claimed_bdev);
goto out_putf;
@@ -1110,44 +1124,58 @@ static int loop_set_fd(struct loop_device *lo, fmode_t mode,
mapping = file->f_mapping;
inode = mapping->host;
- if (!(file->f_mode & FMODE_WRITE) || !(mode & FMODE_WRITE) ||
- !file->f_op->write_iter)
- lo_flags |= LO_FLAGS_READ_ONLY;
-
size = get_loop_size(lo, file);
error = loop_validate_size(size);
if (error)
goto out_unlock;
+
+ if ((config->info.lo_flags & ~LOOP_CONFIGURE_SETTABLE_FLAGS) != 0) {
+ error = -EINVAL;
+ goto out_unlock;
+ }
+
+ if (config->block_size) {
+ error = loop_validate_block_size(config->block_size);
+ if (error)
+ goto out_unlock;
+ }
+
+ error = loop_set_status_from_info(lo, &config->info);
+ if (error)
+ goto out_unlock;
+
+ if (!(file->f_mode & FMODE_WRITE) || !(mode & FMODE_WRITE) ||
+ !file->f_op->write_iter)
+ lo->lo_flags |= LO_FLAGS_READ_ONLY;
+
error = loop_prepare_queue(lo);
if (error)
goto out_unlock;
error = 0;
- set_device_ro(bdev, (lo_flags & LO_FLAGS_READ_ONLY) != 0);
+ set_device_ro(bdev, (lo->lo_flags & LO_FLAGS_READ_ONLY) != 0);
- lo->use_dio = false;
+ lo->use_dio = lo->lo_flags & LO_FLAGS_DIRECT_IO;
lo->lo_device = bdev;
- lo->lo_flags = lo_flags;
lo->lo_backing_file = file;
- lo->transfer = NULL;
- lo->ioctl = NULL;
- lo->lo_sizelimit = 0;
lo->old_gfp_mask = mapping_gfp_mask(mapping);
mapping_set_gfp_mask(mapping, lo->old_gfp_mask & ~(__GFP_IO|__GFP_FS));
- if (!(lo_flags & LO_FLAGS_READ_ONLY) && file->f_op->fsync)
+ if (!(lo->lo_flags & LO_FLAGS_READ_ONLY) && file->f_op->fsync)
blk_queue_write_cache(lo->lo_queue, true, false);
- if (io_is_direct(lo->lo_backing_file) && inode->i_sb->s_bdev) {
+ if (config->block_size)
+ bsize = config->block_size;
+ else if (io_is_direct(lo->lo_backing_file) && inode->i_sb->s_bdev)
/* In case of direct I/O, match underlying block size */
- unsigned short bsize = bdev_logical_block_size(
- inode->i_sb->s_bdev);
+ bsize = bdev_logical_block_size(inode->i_sb->s_bdev);
+ else
+ bsize = 512;
- blk_queue_logical_block_size(lo->lo_queue, bsize);
- blk_queue_physical_block_size(lo->lo_queue, bsize);
- blk_queue_io_min(lo->lo_queue, bsize);
- }
+ blk_queue_logical_block_size(lo->lo_queue, bsize);
+ blk_queue_physical_block_size(lo->lo_queue, bsize);
+ blk_queue_io_min(lo->lo_queue, bsize);
loop_update_rotational(lo);
loop_update_dio(lo);
@@ -1170,14 +1198,14 @@ static int loop_set_fd(struct loop_device *lo, fmode_t mode,
if (partscan)
loop_reread_partitions(lo, bdev);
if (claimed_bdev)
- bd_abort_claiming(bdev, claimed_bdev, loop_set_fd);
+ bd_abort_claiming(bdev, claimed_bdev, loop_configure);
return 0;
out_unlock:
mutex_unlock(&loop_ctl_mutex);
out_bdev:
if (claimed_bdev)
- bd_abort_claiming(bdev, claimed_bdev, loop_set_fd);
+ bd_abort_claiming(bdev, claimed_bdev, loop_configure);
out_putf:
fput(file);
out:
@@ -1607,8 +1635,9 @@ static int loop_set_block_size(struct loop_device *lo, unsigned long arg)
if (lo->lo_state != Lo_bound)
return -ENXIO;
- if (arg < 512 || arg > PAGE_SIZE || !is_power_of_2(arg))
- return -EINVAL;
+ err = loop_validate_block_size(arg);
+ if (err)
+ return err;
if (lo->lo_queue->limits.logical_block_size == arg)
return 0;
@@ -1670,8 +1699,27 @@ static int lo_ioctl(struct block_device *bdev, fmode_t mode,
int err;
switch (cmd) {
- case LOOP_SET_FD:
- return loop_set_fd(lo, mode, bdev, arg);
+ case LOOP_SET_FD: {
+ /*
+ * Legacy case - pass in a zeroed out struct loop_config with
+ * only the file descriptor set , which corresponds with the
+ * default parameters we'd have used otherwise.
+ */
+ struct loop_config config;
+
+ memset(&config, 0, sizeof(config));
+ config.fd = arg;
+
+ return loop_configure(lo, mode, bdev, &config);
+ }
+ case LOOP_CONFIGURE: {
+ struct loop_config config;
+
+ if (copy_from_user(&config, argp, sizeof(config)))
+ return -EFAULT;
+
+ return loop_configure(lo, mode, bdev, &config);
+ }
case LOOP_CHANGE_FD:
return loop_change_fd(lo, bdev, arg);
case LOOP_CLR_FD:
@@ -1843,6 +1891,7 @@ static int lo_compat_ioctl(struct block_device *bdev, fmode_t mode,
case LOOP_CLR_FD:
case LOOP_GET_STATUS64:
case LOOP_SET_STATUS64:
+ case LOOP_CONFIGURE:
arg = (unsigned long) compat_ptr(arg);
/* fall through */
case LOOP_SET_FD:
diff --git a/include/uapi/linux/loop.h b/include/uapi/linux/loop.h
index 6b32fee80ce0..24a1c45bd1ae 100644
--- a/include/uapi/linux/loop.h
+++ b/include/uapi/linux/loop.h
@@ -31,6 +31,10 @@ enum {
/* LO_FLAGS that can be cleared using LOOP_SET_STATUS(64) */
#define LOOP_SET_STATUS_CLEARABLE_FLAGS (LO_FLAGS_AUTOCLEAR)
+/* LO_FLAGS that can be set using LOOP_CONFIGURE */
+#define LOOP_CONFIGURE_SETTABLE_FLAGS (LO_FLAGS_READ_ONLY | LO_FLAGS_AUTOCLEAR \
+ | LO_FLAGS_PARTSCAN | LO_FLAGS_DIRECT_IO)
+
#include <asm/posix_types.h> /* for __kernel_old_dev_t */
#include <linux/types.h> /* for __u64 */
@@ -66,6 +70,22 @@ struct loop_info64 {
__u64 lo_init[2];
};
+/**
+ * struct loop_config - Complete configuration for a loop device.
+ * @fd: fd of the file to be used as a backing file for the loop device.
+ * @block_size: block size to use; ignored if 0.
+ * @info: struct loop_info64 to configure the loop device with.
+ *
+ * This structure is used with the LOOP_CONFIGURE ioctl, and can be used to
+ * atomically setup and configure all loop device parameters at once.
+ */
+struct loop_config {
+ __u32 fd;
+ __u32 block_size;
+ struct loop_info64 info;
+ __u64 __reserved[8];
+};
+
/*
* Loop filter types
*/
@@ -96,6 +116,7 @@ struct loop_info64 {
#define LOOP_SET_CAPACITY 0x4C07
#define LOOP_SET_DIRECT_IO 0x4C08
#define LOOP_SET_BLOCK_SIZE 0x4C09
+#define LOOP_CONFIGURE 0x4C0A
/* /dev/loop-control interface */
#define LOOP_CTL_ADD 0x4C80
--
2.26.2.303.gf8c07b1a785-goog
next prev parent reply other threads:[~2020-04-29 14:04 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-29 14:03 [PATCH v4 00/10] Add a new LOOP_CONFIGURE ioctl Martijn Coenen
2020-04-29 14:03 ` [PATCH v4 01/10] loop: Factor out loop size validation Martijn Coenen
2020-04-29 14:12 ` Ming Lei
2020-05-01 11:33 ` Martijn Coenen
2020-05-01 17:26 ` Christoph Hellwig
2020-04-29 14:03 ` [PATCH v4 02/10] loop: Factor out setting loop device size Martijn Coenen
2020-05-01 17:26 ` Christoph Hellwig
2020-04-29 14:03 ` [PATCH v4 03/10] loop: Switch to set_capacity_revalidate_and_notify() Martijn Coenen
2020-05-01 17:27 ` Christoph Hellwig
2020-04-29 14:03 ` [PATCH v4 04/10] loop: Refactor loop_set_status() size calculation Martijn Coenen
2020-05-01 17:30 ` Christoph Hellwig
2020-05-01 19:33 ` Martijn Coenen
2020-05-06 5:10 ` Christoph Hellwig
2020-05-06 6:03 ` Christoph Hellwig
2020-04-29 14:03 ` [PATCH v4 05/10] loop: Remove figure_loop_size() Martijn Coenen
2020-05-06 6:04 ` Christoph Hellwig
2020-04-29 14:03 ` [PATCH v4 06/10] loop: Factor out configuring loop from status Martijn Coenen
2020-05-06 6:05 ` Christoph Hellwig
2020-04-29 14:03 ` [PATCH v4 07/10] loop: Move loop_set_status_from_info() and friends up Martijn Coenen
2020-05-06 6:06 ` Christoph Hellwig
2020-04-29 14:03 ` [PATCH v4 08/10] loop: Rework lo_ioctl() __user argument casting Martijn Coenen
2020-05-06 6:07 ` Christoph Hellwig
2020-04-29 14:03 ` [PATCH v4 09/10] loop: Clean up LOOP_SET_STATUS lo_flags handling Martijn Coenen
2020-05-06 6:08 ` Christoph Hellwig
2020-04-29 14:03 ` Martijn Coenen [this message]
2020-05-06 6:09 ` [PATCH v4 10/10] loop: Add LOOP_CONFIGURE ioctl Christoph Hellwig
2020-05-06 9:55 ` Martijn Coenen
2020-05-06 9:44 ` Michael Kerrisk (man-pages)
2020-05-06 9:57 ` Martijn Coenen
2020-05-12 6:46 ` Martijn Coenen
2020-05-13 2:29 ` Jens Axboe
2020-05-13 2:30 ` Jens Axboe
2020-05-13 7:07 ` Martijn Coenen
2020-05-13 10:22 ` Christoph Hellwig
2020-05-13 13:49 ` Martijn Coenen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200429140341.13294-11-maco@android.com \
--to=maco@android.com \
--cc=Chaitanya.Kulkarni@wdc.com \
--cc=axboe@kernel.dk \
--cc=bvanassche@acm.org \
--cc=hch@lst.de \
--cc=jaegeuk@kernel.org \
--cc=kernel-team@android.com \
--cc=linux-api@vger.kernel.org \
--cc=linux-block@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maco@google.com \
--cc=ming.lei@redhat.com \
--cc=narayan@google.com \
--cc=zezeozue@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).