linux-block.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jeffle Xu <jefflexu@linux.alibaba.com>
To: msnitzer@redhat.com, axboe@kernel.dk
Cc: io-uring@vger.kernel.org, dm-devel@redhat.com,
	linux-block@vger.kernel.org, mpatocka@redhat.com,
	caspar@linux.alibaba.com, joseph.qi@linux.alibaba.com
Subject: [PATCH v5 12/12] dm: support IO polling for bio-based dm device
Date: Wed,  3 Mar 2021 19:57:40 +0800	[thread overview]
Message-ID: <20210303115740.127001-13-jefflexu@linux.alibaba.com> (raw)
In-Reply-To: <20210303115740.127001-1-jefflexu@linux.alibaba.com>

IO polling is enabled when all underlying target devices are capable
of IO polling. The sanity check supports the stacked device model, in
which one dm device may be build upon another dm device. In this case,
the mapped device will check if the underlying dm target device
supports IO polling.

Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
---
 drivers/md/dm-table.c         | 26 ++++++++++++
 drivers/md/dm.c               | 74 +++++++++++++++++++++++++++++++++++
 include/linux/device-mapper.h |  1 +
 3 files changed, 101 insertions(+)

diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
index 95391f78b8d5..ed72349eb1db 100644
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -1982,6 +1982,19 @@ static int device_requires_stable_pages(struct dm_target *ti,
 	return blk_queue_stable_writes(q);
 }
 
+static int device_not_poll_capable(struct dm_target *ti, struct dm_dev *dev,
+				   sector_t start, sector_t len, void *data)
+{
+	struct request_queue *q = bdev_get_queue(dev->bdev);
+
+	return !test_bit(QUEUE_FLAG_POLL, &q->queue_flags);
+}
+
+int dm_table_supports_poll(struct dm_table *t)
+{
+	return !dm_table_any_dev_attr(t, device_not_poll_capable, NULL);
+}
+
 void dm_table_set_restrictions(struct dm_table *t, struct request_queue *q,
 			       struct queue_limits *limits)
 {
@@ -2079,6 +2092,19 @@ void dm_table_set_restrictions(struct dm_table *t, struct request_queue *q,
 
 	dm_update_keyslot_manager(q, t);
 	blk_queue_update_readahead(q);
+
+	/*
+	 * Check for request-based device is remained to
+	 * dm_mq_init_request_queue()->blk_mq_init_allocated_queue().
+	 * For bio-based device, only set QUEUE_FLAG_POLL when all underlying
+	 * devices supporting polling.
+	 */
+	if (__table_type_bio_based(t->type)) {
+		if (dm_table_supports_poll(t))
+			blk_queue_flag_set(QUEUE_FLAG_POLL, q);
+		else
+			blk_queue_flag_clear(QUEUE_FLAG_POLL, q);
+	}
 }
 
 unsigned int dm_table_get_num_targets(struct dm_table *t)
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index f1b76203b3c7..3f3f47d66386 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -1714,6 +1714,78 @@ static blk_qc_t dm_submit_bio(struct bio *bio)
 	return BLK_QC_T_NONE;
 }
 
+struct dm_poll_data {
+	blk_qc_t cookie;
+	int count;
+};
+
+static int dm_poll_one_dev(struct dm_target *ti, struct dm_dev *dev,
+			   sector_t start, sector_t len, void *data)
+{
+	struct dm_poll_data *pdata = data;
+	struct request_queue *q = bdev_get_queue(dev->bdev);
+
+	if (queue_is_mq(q)) {
+		struct blk_mq_hw_ctx *hctx;
+		int i, cpu;
+
+		if (!percpu_ref_tryget(&q->q_usage_counter))
+			return 0;
+
+		if (blk_qc_t_is_poll_cpu(pdata->cookie)) {
+			cpu = blk_qc_t_to_cpu(pdata->cookie);
+			hctx = blk_mq_get_hctx(q, cpu, REQ_HIPRI);
+			pdata->count += blk_mq_poll_hctx(q, hctx);
+		} else {
+			queue_for_each_poll_hw_ctx(q, hctx, i)
+				pdata->count += blk_mq_poll_hctx(q, hctx);
+		}
+
+		percpu_ref_put(&q->q_usage_counter);
+	} else {
+		struct gendisk *disk = dev->bdev->bd_disk;
+
+		pdata->count += disk->fops->poll(q, pdata->cookie);
+	}
+
+	return 0;
+}
+
+static int dm_bio_poll(struct request_queue *q, blk_qc_t cookie)
+{
+	int i, srcu_idx;
+	struct dm_table *t;
+	struct dm_target *ti;
+	struct mapped_device *md = queue_to_disk(q)->private_data;
+	struct dm_poll_data pdata = {
+		.cookie = cookie,
+	};
+
+	t = dm_get_live_table(md, &srcu_idx);
+
+	for (i = 0; i < dm_table_get_num_targets(t); i++) {
+		ti = dm_table_get_target(t, i);
+		ti->type->iterate_devices(ti, dm_poll_one_dev, &pdata);
+	}
+
+	dm_put_live_table(md, srcu_idx);
+
+	return pdata.count;
+}
+
+static bool dm_bio_poll_capable(struct gendisk *disk)
+{
+	int ret, srcu_idx;
+	struct mapped_device *md = disk->private_data;
+	struct dm_table *t;
+
+	t = dm_get_live_table(md, &srcu_idx);
+	ret = dm_table_supports_poll(t);
+	dm_put_live_table(md, srcu_idx);
+
+	return ret;
+}
+
 /*-----------------------------------------------------------------
  * An IDR is used to keep track of allocated minor numbers.
  *---------------------------------------------------------------*/
@@ -3126,6 +3198,8 @@ static const struct pr_ops dm_pr_ops = {
 };
 
 static const struct block_device_operations dm_blk_dops = {
+	.poll = dm_bio_poll,
+	.poll_capable = dm_bio_poll_capable,
 	.submit_bio = dm_submit_bio,
 	.open = dm_blk_open,
 	.release = dm_blk_close,
diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h
index 7f4ac87c0b32..31bfd6f70013 100644
--- a/include/linux/device-mapper.h
+++ b/include/linux/device-mapper.h
@@ -538,6 +538,7 @@ unsigned int dm_table_get_num_targets(struct dm_table *t);
 fmode_t dm_table_get_mode(struct dm_table *t);
 struct mapped_device *dm_table_get_md(struct dm_table *t);
 const char *dm_table_device_name(struct dm_table *t);
+int dm_table_supports_poll(struct dm_table *t);
 
 /*
  * Trigger an event.
-- 
2.27.0


  parent reply	other threads:[~2021-03-03 16:43 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-03 11:57 [PATCH v5 00/12] dm: support polling Jeffle Xu
2021-03-03 11:57 ` [PATCH v5 01/12] block: move definition of blk_qc_t to types.h Jeffle Xu
2021-03-03 11:57 ` [PATCH v5 02/12] block: add queue_to_disk() to get gendisk from request_queue Jeffle Xu
2021-03-03 11:57 ` [PATCH v5 03/12] block: add poll method to support bio-based IO polling Jeffle Xu
2021-03-10 22:01   ` Mike Snitzer
2021-03-11  5:31     ` [dm-devel] " JeffleXu
2021-03-03 11:57 ` [PATCH v5 04/12] block: add poll_capable " Jeffle Xu
2021-03-10 22:21   ` Mike Snitzer
2021-03-11  5:43     ` [dm-devel] " JeffleXu
2021-03-03 11:57 ` [PATCH v5 05/12] blk-mq: extract one helper function polling hw queue Jeffle Xu
2021-03-03 11:57 ` [PATCH v5 06/12] blk-mq: add iterator for polling hw queues Jeffle Xu
2021-03-03 11:57 ` [PATCH v5 07/12] blk-mq: add one helper function getting hw queue Jeffle Xu
2021-03-03 11:57 ` [PATCH v5 08/12] dm: always return BLK_QC_T_NONE for bio-based device Jeffle Xu
2021-03-03 11:57 ` [PATCH v5 09/12] nvme/pci: don't wait for locked polling queue Jeffle Xu
2021-03-10 21:57   ` Mike Snitzer
2021-03-03 11:57 ` [PATCH v5 10/12] block: fastpath for bio-based polling Jeffle Xu
2021-03-10 23:18   ` Mike Snitzer
2021-03-11  6:36     ` [dm-devel] " JeffleXu
2021-03-12  2:26       ` JeffleXu
2021-03-11 13:56   ` Ming Lei
2021-03-12  1:56     ` [dm-devel] " JeffleXu
2021-03-03 11:57 ` [PATCH v5 11/12] block: sub-fastpath " Jeffle Xu
2021-03-03 11:57 ` Jeffle Xu [this message]
2021-04-01  2:19 [PATCH V5 00/12] block: support bio based io polling Ming Lei
2021-04-01  2:19 ` [PATCH V5 12/12] dm: support IO polling for bio-based dm device Ming Lei

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210303115740.127001-13-jefflexu@linux.alibaba.com \
    --to=jefflexu@linux.alibaba.com \
    --cc=axboe@kernel.dk \
    --cc=caspar@linux.alibaba.com \
    --cc=dm-devel@redhat.com \
    --cc=io-uring@vger.kernel.org \
    --cc=joseph.qi@linux.alibaba.com \
    --cc=linux-block@vger.kernel.org \
    --cc=mpatocka@redhat.com \
    --cc=msnitzer@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).