linux-block.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Damien Le Moal <damien.lemoal@wdc.com>
To: dm-devel@redhat.com, Mike Snitzer <snitzer@redhat.com>,
	linux-block@vger.kernel.org, Jens Axboe <axboe@kernel.dk>
Subject: [PATCH v3 01/11] block: improve handling of all zones reset operation
Date: Fri, 21 May 2021 12:01:09 +0900	[thread overview]
Message-ID: <20210521030119.1209035-2-damien.lemoal@wdc.com> (raw)
In-Reply-To: <20210521030119.1209035-1-damien.lemoal@wdc.com>

SCSI, ZNS and null_blk zoned devices support resetting all zones using
a single command (REQ_OP_ZONE_RESET_ALL), as indicated using the device
request queue flag QUEUE_FLAG_ZONE_RESETALL. This flag is not set for
device mapper targets creating zoned devices. In this case, a user
request for resetting all zones of a device is processed in
blkdev_zone_mgmt() by issuing a REQ_OP_ZONE_RESET operation for each
zone of the device. This leads to different behaviors of the
BLKRESETZONE ioctl() depending on the target device support for the
reset all operation. E.g.

blkzone reset /dev/sdX

will reset all zones of a SCSI device using a single command that will
ignore conventional, read-only or offline zones.

But a dm-linear device including conventional, read-only or offline
zones cannot be reset in the same manner as some of the single zone
reset operations issued by blkdev_zone_mgmt() will fail. E.g.:

blkzone reset /dev/dm-Y
blkzone: /dev/dm-0: BLKRESETZONE ioctl failed: Remote I/O error

To simplify applications and tools development, unify the behavior of
the all-zone reset operation by modifying blkdev_zone_mgmt() to not
issue a zone reset operation for conventional, read-only and offline
zones, thus mimicking what an actual reset-all device command does on a
device supporting REQ_OP_ZONE_RESET_ALL. This emulation is done using
the new function blkdev_zone_reset_all_emulated(). The zones needing a
reset are identified using a bitmap that is initialized using a zone
report. Since empty zones do not need a reset, also ignore these zones.
The function blkdev_zone_reset_all() is introduced for block devices
natively supporting reset all operations. blkdev_zone_mgmt() is modified
to call either function to execute an all zone reset request.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
[hch: split into multiple functions]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
---
 block/blk-zoned.c | 117 +++++++++++++++++++++++++++++++++++-----------
 1 file changed, 90 insertions(+), 27 deletions(-)

diff --git a/block/blk-zoned.c b/block/blk-zoned.c
index 250cb76ee615..0ded16b0f713 100644
--- a/block/blk-zoned.c
+++ b/block/blk-zoned.c
@@ -161,18 +161,87 @@ int blkdev_report_zones(struct block_device *bdev, sector_t sector,
 }
 EXPORT_SYMBOL_GPL(blkdev_report_zones);
 
-static inline bool blkdev_allow_reset_all_zones(struct block_device *bdev,
-						sector_t sector,
-						sector_t nr_sectors)
+static inline unsigned long *blk_alloc_zone_bitmap(int node,
+						   unsigned int nr_zones)
 {
-	if (!blk_queue_zone_resetall(bdev_get_queue(bdev)))
-		return false;
+	return kcalloc_node(BITS_TO_LONGS(nr_zones), sizeof(unsigned long),
+			    GFP_NOIO, node);
+}
 
+static int blk_zone_need_reset_cb(struct blk_zone *zone, unsigned int idx,
+				  void *data)
+{
 	/*
-	 * REQ_OP_ZONE_RESET_ALL can be executed only if the number of sectors
-	 * of the applicable zone range is the entire disk.
+	 * For an all-zones reset, ignore conventional, empty, read-only
+	 * and offline zones.
 	 */
-	return !sector && nr_sectors == get_capacity(bdev->bd_disk);
+	switch (zone->cond) {
+	case BLK_ZONE_COND_NOT_WP:
+	case BLK_ZONE_COND_EMPTY:
+	case BLK_ZONE_COND_READONLY:
+	case BLK_ZONE_COND_OFFLINE:
+		return 0;
+	default:
+		set_bit(idx, (unsigned long *)data);
+		return 0;
+	}
+}
+
+static int blkdev_zone_reset_all_emulated(struct block_device *bdev,
+					  gfp_t gfp_mask)
+{
+	struct request_queue *q = bdev_get_queue(bdev);
+	sector_t capacity = get_capacity(bdev->bd_disk);
+	sector_t zone_sectors = blk_queue_zone_sectors(q);
+	unsigned long *need_reset;
+	struct bio *bio = NULL;
+	sector_t sector;
+	int ret;
+
+	need_reset = blk_alloc_zone_bitmap(q->node, q->nr_zones);
+	if (!need_reset)
+		return -ENOMEM;
+
+	ret = bdev->bd_disk->fops->report_zones(bdev->bd_disk, 0,
+				q->nr_zones, blk_zone_need_reset_cb,
+				need_reset);
+	if (ret < 0)
+		goto out_free_need_reset;
+
+	ret = 0;
+	while (sector < capacity) {
+		if (!test_bit(blk_queue_zone_no(q, sector), need_reset)) {
+			sector += zone_sectors;
+			continue;
+		}
+		bio = blk_next_bio(bio, 0, gfp_mask);
+		bio_set_dev(bio, bdev);
+		bio->bi_opf = REQ_OP_ZONE_RESET | REQ_SYNC;
+		bio->bi_iter.bi_sector = sector;
+		sector += zone_sectors;
+
+		/* This may take a while, so be nice to others */
+		cond_resched();
+	}
+
+	if (bio) {
+		ret = submit_bio_wait(bio);
+		bio_put(bio);
+	}
+
+out_free_need_reset:
+	kfree(need_reset);
+	return ret;
+}
+
+static int blkdev_zone_reset_all(struct block_device *bdev, gfp_t gfp_mask)
+{
+	struct bio bio;
+
+	bio_init(&bio, NULL, 0);
+	bio_set_dev(&bio, bdev);
+	bio.bi_opf = REQ_OP_ZONE_RESET_ALL | REQ_SYNC;
+	return submit_bio_wait(&bio);
 }
 
 /**
@@ -200,7 +269,7 @@ int blkdev_zone_mgmt(struct block_device *bdev, enum req_opf op,
 	sector_t capacity = get_capacity(bdev->bd_disk);
 	sector_t end_sector = sector + nr_sectors;
 	struct bio *bio = NULL;
-	int ret;
+	int ret = 0;
 
 	if (!blk_queue_is_zoned(q))
 		return -EOPNOTSUPP;
@@ -222,20 +291,21 @@ int blkdev_zone_mgmt(struct block_device *bdev, enum req_opf op,
 	if ((nr_sectors & (zone_sectors - 1)) && end_sector != capacity)
 		return -EINVAL;
 
+	/*
+	 * In the case of a zone reset operation over all zones,
+	 * REQ_OP_ZONE_RESET_ALL can be used with devices supporting this
+	 * command. For other devices, we emulate this command behavior by
+	 * identifying the zones needing a reset.
+	 */
+	if (op == REQ_OP_ZONE_RESET && sector == 0 && nr_sectors == capacity) {
+		if (!blk_queue_zone_resetall(q))
+			return blkdev_zone_reset_all_emulated(bdev, gfp_mask);
+		return blkdev_zone_reset_all(bdev, gfp_mask);
+	}
+
 	while (sector < end_sector) {
 		bio = blk_next_bio(bio, 0, gfp_mask);
 		bio_set_dev(bio, bdev);
-
-		/*
-		 * Special case for the zone reset operation that reset all
-		 * zones, this is useful for applications like mkfs.
-		 */
-		if (op == REQ_OP_ZONE_RESET &&
-		    blkdev_allow_reset_all_zones(bdev, sector, nr_sectors)) {
-			bio->bi_opf = REQ_OP_ZONE_RESET_ALL | REQ_SYNC;
-			break;
-		}
-
 		bio->bi_opf = op | REQ_SYNC;
 		bio->bi_iter.bi_sector = sector;
 		sector += zone_sectors;
@@ -396,13 +466,6 @@ int blkdev_zone_mgmt_ioctl(struct block_device *bdev, fmode_t mode,
 	return ret;
 }
 
-static inline unsigned long *blk_alloc_zone_bitmap(int node,
-						   unsigned int nr_zones)
-{
-	return kcalloc_node(BITS_TO_LONGS(nr_zones), sizeof(unsigned long),
-			    GFP_NOIO, node);
-}
-
 void blk_queue_free_zone_bitmaps(struct request_queue *q)
 {
 	kfree(q->conv_zones_bitmap);
-- 
2.31.1


  reply	other threads:[~2021-05-21  3:01 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-21  3:01 [PATCH v3 00/11] dm: Improve zoned block device support Damien Le Moal
2021-05-21  3:01 ` Damien Le Moal [this message]
2021-05-21  5:13   ` [PATCH v3 01/11] block: improve handling of all zones reset operation Johannes Thumshirn
2021-05-24  0:30   ` Chaitanya Kulkarni
2021-05-21  3:01 ` [PATCH v3 02/11] block: introduce bio zone helpers Damien Le Moal
2021-05-21  5:06   ` Johannes Thumshirn
2021-05-24  2:24   ` Chaitanya Kulkarni
2021-05-21  3:01 ` [PATCH v3 03/11] block: introduce BIO_ZONE_WRITE_LOCKED bio flag Damien Le Moal
2021-05-24  2:24   ` Chaitanya Kulkarni
2021-05-21  3:01 ` [PATCH v3 04/11] dm: Fix dm_accept_partial_bio() Damien Le Moal
2021-05-21  3:01 ` [PATCH v3 05/11] dm: cleanup device_area_is_invalid() Damien Le Moal
2021-05-21  3:01 ` [PATCH v3 06/11] dm: move zone related code to dm-zone.c Damien Le Moal
2021-05-21  3:01 ` [PATCH v3 07/11] dm: Introduce dm_report_zones() Damien Le Moal
2021-05-21  3:01 ` [PATCH v3 08/11] dm: Forbid requeue of writes to zones Damien Le Moal
2021-05-21  5:10   ` Johannes Thumshirn
2021-05-21  3:01 ` [PATCH v3 09/11] dm: rearrange core declarations Damien Le Moal
2021-05-21  5:09   ` Johannes Thumshirn
2021-05-21  3:01 ` [PATCH v3 10/11] dm: introduce zone append emulation Damien Le Moal
2021-05-21  3:01 ` [PATCH v3 11/11] dm crypt: Fix zoned block device support Damien Le Moal
2021-05-21  5:07   ` Johannes Thumshirn

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210521030119.1209035-2-damien.lemoal@wdc.com \
    --to=damien.lemoal@wdc.com \
    --cc=axboe@kernel.dk \
    --cc=dm-devel@redhat.com \
    --cc=linux-block@vger.kernel.org \
    --cc=snitzer@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).