From: Christoph Hellwig <hch@lst.de>
To: Jens Axboe <axboe@kernel.dk>, Song Liu <song@kernel.org>
Cc: "Konrad Rzeszutek Wilk" <konrad.wilk@oracle.com>,
"Roger Pau Monné" <roger.pau@citrix.com>,
"Minchan Kim" <minchan@kernel.org>,
"Nitin Gupta" <ngupta@vflare.org>,
"Stefan Haberland" <sth@linux.ibm.com>,
"Jan Hoeppner" <hoeppner@linux.ibm.com>,
linux-block@vger.kernel.org, linux-raid@vger.kernel.org,
linux-s390@vger.kernel.org, linux-scsi@vger.kernel.org
Subject: [PATCH 5/8] block: split __blkdev_put
Date: Tue, 25 May 2021 08:12:58 +0200 [thread overview]
Message-ID: <20210525061301.2242282-6-hch@lst.de> (raw)
In-Reply-To: <20210525061301.2242282-1-hch@lst.de>
Split __blkdev_put into one helper for the whole device, and one for
partitions as well as another shared helper for flushing the block
device inode mapping.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
fs/block_dev.c | 58 ++++++++++++++++++++++++++++----------------------
1 file changed, 32 insertions(+), 26 deletions(-)
diff --git a/fs/block_dev.c b/fs/block_dev.c
index 43dce929e7ee..cd45b54e86b4 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -1234,7 +1234,13 @@ void bd_unlink_disk_holder(struct block_device *bdev, struct gendisk *disk)
EXPORT_SYMBOL_GPL(bd_unlink_disk_holder);
#endif
-static void __blkdev_put(struct block_device *bdev, fmode_t mode);
+static void blkdev_flush_mapping(struct block_device *bdev)
+{
+ WARN_ON_ONCE(bdev->bd_holders);
+ sync_blockdev(bdev);
+ kill_bdev(bdev);
+ bdev_write_inode(bdev);
+}
int bdev_disk_changed(struct block_device *bdev, bool invalidate)
{
@@ -1316,6 +1322,14 @@ static int blkdev_get_whole(struct block_device *bdev, fmode_t mode)
return 0;;
}
+static void blkdev_put_whole(struct block_device *bdev, fmode_t mode)
+{
+ if (!--bdev->bd_openers)
+ blkdev_flush_mapping(bdev);
+ if (bdev->bd_disk->fops->release)
+ bdev->bd_disk->fops->release(bdev->bd_disk, mode);
+}
+
static int blkdev_get_part(struct block_device *part, fmode_t mode)
{
struct gendisk *disk = part->bd_disk;
@@ -1343,12 +1357,24 @@ static int blkdev_get_part(struct block_device *part, fmode_t mode)
return 0;
out_blkdev_put:
- __blkdev_put(whole, mode);
+ blkdev_put_whole(whole, mode);
out_put_whole:
bdput(whole);
return ret;
}
+static void blkdev_put_part(struct block_device *part, fmode_t mode)
+{
+ struct block_device *whole = bdev_whole(part);
+
+ if (--part->bd_openers)
+ return;
+ blkdev_flush_mapping(part);
+ whole->bd_part_count--;
+ blkdev_put_whole(whole, mode);
+ bdput(whole);
+}
+
struct block_device *blkdev_get_no_open(dev_t dev)
{
struct block_device *bdev;
@@ -1542,29 +1568,6 @@ static int blkdev_open(struct inode * inode, struct file * filp)
return 0;
}
-static void __blkdev_put(struct block_device *bdev, fmode_t mode)
-{
- struct gendisk *disk = bdev->bd_disk;
- struct block_device *victim = NULL;
-
- if (!--bdev->bd_openers) {
- WARN_ON_ONCE(bdev->bd_holders);
- sync_blockdev(bdev);
- kill_bdev(bdev);
- bdev_write_inode(bdev);
- if (bdev_is_partition(bdev))
- victim = bdev_whole(bdev);
- }
-
- if (!bdev_is_partition(bdev) && disk->fops->release)
- disk->fops->release(disk, mode);
- if (victim) {
- victim->bd_part_count--;
- __blkdev_put(victim, mode);
- bdput(victim);
- }
-}
-
void blkdev_put(struct block_device *bdev, fmode_t mode)
{
struct gendisk *disk = bdev->bd_disk;
@@ -1618,7 +1621,10 @@ void blkdev_put(struct block_device *bdev, fmode_t mode)
*/
disk_flush_events(disk, DISK_EVENT_MEDIA_CHANGE);
- __blkdev_put(bdev, mode);
+ if (bdev_is_partition(bdev))
+ blkdev_put_part(bdev, mode);
+ else
+ blkdev_put_whole(bdev, mode);
mutex_unlock(&disk->open_mutex);
blkdev_put_no_open(bdev);
--
2.30.2
next prev parent reply other threads:[~2021-05-25 6:13 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-25 6:12 move bd_mutex to the gendisk v2 Christoph Hellwig
2021-05-25 6:12 ` [PATCH 1/8] block: split __blkdev_get Christoph Hellwig
2021-05-25 8:04 ` Hannes Reinecke
2021-05-25 6:12 ` [PATCH 2/8] block: move sync_blockdev from __blkdev_put to blkdev_put Christoph Hellwig
2021-05-25 8:05 ` Hannes Reinecke
2021-05-25 6:12 ` [PATCH 3/8] block: move bd_mutex to struct gendisk Christoph Hellwig
2021-05-25 8:06 ` Hannes Reinecke
2021-05-26 1:06 ` Ming Lei
2021-05-28 7:27 ` Roger Pau Monné
2021-05-25 6:12 ` [PATCH 4/8] block: move adjusting bd_part_count out of __blkdev_get Christoph Hellwig
2021-05-25 8:18 ` Hannes Reinecke
2021-05-26 1:59 ` Ming Lei
2021-05-25 6:12 ` Christoph Hellwig [this message]
2021-05-25 8:19 ` [PATCH 5/8] block: split __blkdev_put Hannes Reinecke
2021-05-26 2:05 ` Ming Lei
2021-05-25 6:12 ` [PATCH 6/8] block: move bd_part_count to struct gendisk Christoph Hellwig
2021-05-25 8:20 ` Hannes Reinecke
2021-05-26 2:09 ` Ming Lei
2021-05-25 6:13 ` [PATCH 7/8] block: factor out a part_devt helper Christoph Hellwig
2021-05-25 8:25 ` Hannes Reinecke
2021-05-26 2:16 ` Ming Lei
2021-05-25 6:13 ` [PATCH 8/8] block: remove bdget_disk Christoph Hellwig
2021-05-25 8:26 ` Hannes Reinecke
2021-05-26 2:24 ` Ming Lei
2021-06-01 13:48 ` move bd_mutex to the gendisk v2 Jens Axboe
-- strict thread matches above, loose matches on Subject: below --
2021-05-12 6:18 move bd_mutex to the gendisk (resend) Christoph Hellwig
2021-05-12 6:18 ` [PATCH 5/8] block: split __blkdev_put Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210525061301.2242282-6-hch@lst.de \
--to=hch@lst.de \
--cc=axboe@kernel.dk \
--cc=hoeppner@linux.ibm.com \
--cc=konrad.wilk@oracle.com \
--cc=linux-block@vger.kernel.org \
--cc=linux-raid@vger.kernel.org \
--cc=linux-s390@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=minchan@kernel.org \
--cc=ngupta@vflare.org \
--cc=roger.pau@citrix.com \
--cc=song@kernel.org \
--cc=sth@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).