* [PATCH V2 0/8] loop: small clenaup
@ 2021-09-23 1:49 Chaitanya Kulkarni
2021-09-23 1:49 ` [PATCH V2 1/8] loop: use sysfs_emit() in the sysfs offset show Chaitanya Kulkarni
` (7 more replies)
0 siblings, 8 replies; 9+ messages in thread
From: Chaitanya Kulkarni @ 2021-09-23 1:49 UTC (permalink / raw)
To: linux-block; +Cc: Chaitanya Kulkarni
From: Chaitanya Kulkarni <kch@nvidia.com>
Hi,
This has few improvment and cleanups such as using sysfs_emit() for the
sysfs dev attributes and removing variables that are only used once and
a cleanup with fixing declaration.
Below is the test log where 10 loop devices created, each device is
linked to it's own file in ./loopX, formatted with xfs and mounted on
/mnt/loopX. For each device it reads the offset, sizelimit, autoclear,
partscan, and dio attr from sysfs using cat command, then it runs fio
verify job on it.
In summary write-verify fio job seems to work fine :-
root@dev loop-sysfs-emit (for-next) # grep err= 0000-cover-letter.patch
write-and-verify: (groupid=0, jobs=1): err= 0: pid=3402: Wed Sep 22 18:34:50 2021
write-and-verify: (groupid=0, jobs=1): err= 0: pid=3680: Wed Sep 22 18:35:41 2021
write-and-verify: (groupid=0, jobs=1): err= 0: pid=3742: Wed Sep 22 18:36:33 2021
write-and-verify: (groupid=0, jobs=1): err= 0: pid=3783: Wed Sep 22 18:37:25 2021
write-and-verify: (groupid=0, jobs=1): err= 0: pid=3807: Wed Sep 22 18:38:16 2021
write-and-verify: (groupid=0, jobs=1): err= 0: pid=3865: Wed Sep 22 18:39:06 2021
write-and-verify: (groupid=0, jobs=1): err= 0: pid=3892: Wed Sep 22 18:39:56 2021
write-and-verify: (groupid=0, jobs=1): err= 0: pid=3952: Wed Sep 22 18:40:47 2021
write-and-verify: (groupid=0, jobs=1): err= 0: pid=4059: Wed Sep 22 18:41:41 2021
write-and-verify: (groupid=0, jobs=1): err= 0: pid=4079: Wed Sep 22 18:42:49 2021
root@dev loop-sysfs-emit (for-next) #
* Changes from V1:-
1. Update commit log.
2. Add reviewed-by tags.
Chaitanya Kulkarni (8):
loop: use sysfs_emit() in the sysfs offset show
loop: use sysfs_emit() in the sysfs sizelimit show
loop: use sysfs_emit() in the sysfs autoclear show
loop: use sysfs_emit() in the sysfs partscan show
loop: use sysfs_emit() in the sysfs dio show
loop: remove extra variable in lo_fallocate()
loop: remove extra variable in lo_req_flush
loop: allow user to set the queue depth
drivers/block/loop.c | 21 +++++++++++----------
1 file changed, 11 insertions(+), 10 deletions(-)
# ./compile_loop.sh 10
+ FILE=./loop
+ LOOP_MNT=/mnt/loop
+ NN=10
+ unload_loop
++ shuf -i 1-10 -n 10
+ for i in `shuf -i 1-$NN -n $NN`
+ umount /mnt/loop7
umount: /mnt/loop7: no mount point specified.
+ rm -fr ./loop7
+ for i in `shuf -i 1-$NN -n $NN`
+ umount /mnt/loop10
umount: /mnt/loop10: no mount point specified.
+ rm -fr ./loop10
+ for i in `shuf -i 1-$NN -n $NN`
+ umount /mnt/loop6
umount: /mnt/loop6: no mount point specified.
+ rm -fr ./loop6
+ for i in `shuf -i 1-$NN -n $NN`
+ umount /mnt/loop8
umount: /mnt/loop8: no mount point specified.
+ rm -fr ./loop8
+ for i in `shuf -i 1-$NN -n $NN`
+ umount /mnt/loop2
umount: /mnt/loop2: no mount point specified.
+ rm -fr ./loop2
+ for i in `shuf -i 1-$NN -n $NN`
+ umount /mnt/loop1
umount: /mnt/loop1: no mount point specified.
+ rm -fr ./loop1
+ for i in `shuf -i 1-$NN -n $NN`
+ umount /mnt/loop3
umount: /mnt/loop3: no mount point specified.
+ rm -fr ./loop3
+ for i in `shuf -i 1-$NN -n $NN`
+ umount /mnt/loop4
umount: /mnt/loop4: no mount point specified.
+ rm -fr ./loop4
+ for i in `shuf -i 1-$NN -n $NN`
+ umount /mnt/loop9
umount: /mnt/loop9: no mount point specified.
+ rm -fr ./loop9
+ for i in `shuf -i 1-$NN -n $NN`
+ umount /mnt/loop5
umount: /mnt/loop5: no mount point specified.
+ rm -fr ./loop5
+ losetup -D
+ sleep 3
+ rmmod loop
rmmod: ERROR: Module loop is not currently loaded
+ modprobe -r loop
+ lsmod
+ grep loop
++ shuf -i 1-10 -n 10
+ for i in `shuf -i 1-$NN -n $NN`
+ rm -fr ./loop7
+ for i in `shuf -i 1-$NN -n $NN`
+ rm -fr ./loop3
+ for i in `shuf -i 1-$NN -n $NN`
+ rm -fr ./loop1
+ for i in `shuf -i 1-$NN -n $NN`
+ rm -fr ./loop9
+ for i in `shuf -i 1-$NN -n $NN`
+ rm -fr ./loop4
+ for i in `shuf -i 1-$NN -n $NN`
+ rm -fr ./loop5
+ for i in `shuf -i 1-$NN -n $NN`
+ rm -fr ./loop6
+ for i in `shuf -i 1-$NN -n $NN`
+ rm -fr ./loop8
+ for i in `shuf -i 1-$NN -n $NN`
+ rm -fr ./loop10
+ for i in `shuf -i 1-$NN -n $NN`
+ rm -fr ./loop2
+ rm -fr '/mnt/loop*'
+ compile_loop
++ nproc
+ make -j 48 M=drivers/block modules
CC [M] drivers/block/loop.o
MODPOST drivers/block/Module.symvers
LD [M] drivers/block/loop.ko
+ HOST=drivers/block/
++ uname -r
+ HOST_DEST=/lib/modules/5.15.0-rc1blk-next+/kernel/drivers/block
+ cp drivers/block//loop.ko /lib/modules/5.15.0-rc1blk-next+/kernel/drivers/block/
+ load_loop
+ insmod drivers/block/loop.ko max_loop=11 hw_queue_depth=32
++ shuf -i 1-10 -n 10
+ for i in `shuf -i 1-$NN -n $NN`
+ mkdir -p /mnt/loop3
+ truncate -s 2048M ./loop3
+ /mnt/data/util-linux/losetup --direct-io=on /dev/loop3 ./loop3
+ /mnt/data/util-linux/losetup
NAME SIZELIMIT OFFSET AUTOCLEAR RO BACK-FILE DIO LOG-SEC
/dev/loop3 0 0 0 0 /mnt/data/linux-block/loop3 1 512
+ sleep 1
+ mkfs.xfs -f /dev/loop3
meta-data=/dev/loop3 isize=512 agcount=4, agsize=131072 blks
= sectsz=512 attr=2, projid32bit=1
= crc=1 finobt=1, sparse=1, rmapbt=0
= reflink=1 bigtime=0
data = bsize=4096 blocks=524288, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0, ftype=1
log =internal log bsize=4096 blocks=2560, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
Discarding blocks...Done.
+ mount /dev/loop3 /mnt/loop3
+ for attr in offset sizelimit autoclear partscan dio
+ echo -n 'cat /sys/block/loop3/loop/offset : '
cat /sys/block/loop3/loop/offset : + cat /sys/block/loop3/loop/offset
0
+ for attr in offset sizelimit autoclear partscan dio
+ echo -n 'cat /sys/block/loop3/loop/sizelimit : '
cat /sys/block/loop3/loop/sizelimit : + cat /sys/block/loop3/loop/sizelimit
0
+ for attr in offset sizelimit autoclear partscan dio
+ echo -n 'cat /sys/block/loop3/loop/autoclear : '
cat /sys/block/loop3/loop/autoclear : + cat /sys/block/loop3/loop/autoclear
0
+ for attr in offset sizelimit autoclear partscan dio
+ echo -n 'cat /sys/block/loop3/loop/partscan : '
cat /sys/block/loop3/loop/partscan : + cat /sys/block/loop3/loop/partscan
0
+ for attr in offset sizelimit autoclear partscan dio
+ echo -n 'cat /sys/block/loop3/loop/dio : '
cat /sys/block/loop3/loop/dio : + cat /sys/block/loop3/loop/dio
1
+ for i in `shuf -i 1-$NN -n $NN`
+ mkdir -p /mnt/loop5
+ truncate -s 2048M ./loop5
+ /mnt/data/util-linux/losetup --direct-io=on /dev/loop5 ./loop5
+ /mnt/data/util-linux/losetup
NAME SIZELIMIT OFFSET AUTOCLEAR RO BACK-FILE DIO LOG-SEC
/dev/loop5 0 0 0 0 /mnt/data/linux-block/loop5 1 512
/dev/loop3 0 0 0 0 /mnt/data/linux-block/loop3 1 512
+ sleep 1
+ mkfs.xfs -f /dev/loop5
meta-data=/dev/loop5 isize=512 agcount=4, agsize=131072 blks
= sectsz=512 attr=2, projid32bit=1
= crc=1 finobt=1, sparse=1, rmapbt=0
= reflink=1 bigtime=0
data = bsize=4096 blocks=524288, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0, ftype=1
log =internal log bsize=4096 blocks=2560, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
Discarding blocks...Done.
+ mount /dev/loop5 /mnt/loop5
+ for attr in offset sizelimit autoclear partscan dio
+ echo -n 'cat /sys/block/loop5/loop/offset : '
cat /sys/block/loop5/loop/offset : + cat /sys/block/loop5/loop/offset
0
+ for attr in offset sizelimit autoclear partscan dio
+ echo -n 'cat /sys/block/loop5/loop/sizelimit : '
cat /sys/block/loop5/loop/sizelimit : + cat /sys/block/loop5/loop/sizelimit
0
+ for attr in offset sizelimit autoclear partscan dio
+ echo -n 'cat /sys/block/loop5/loop/autoclear : '
cat /sys/block/loop5/loop/autoclear : + cat /sys/block/loop5/loop/autoclear
0
+ for attr in offset sizelimit autoclear partscan dio
+ echo -n 'cat /sys/block/loop5/loop/partscan : '
cat /sys/block/loop5/loop/partscan : + cat /sys/block/loop5/loop/partscan
0
+ for attr in offset sizelimit autoclear partscan dio
+ echo -n 'cat /sys/block/loop5/loop/dio : '
cat /sys/block/loop5/loop/dio : + cat /sys/block/loop5/loop/dio
1
+ for i in `shuf -i 1-$NN -n $NN`
+ mkdir -p /mnt/loop8
+ truncate -s 2048M ./loop8
+ /mnt/data/util-linux/losetup --direct-io=on /dev/loop8 ./loop8
+ /mnt/data/util-linux/losetup
NAME SIZELIMIT OFFSET AUTOCLEAR RO BACK-FILE DIO LOG-SEC
/dev/loop8 0 0 0 0 /mnt/data/linux-block/loop8 1 512
/dev/loop5 0 0 0 0 /mnt/data/linux-block/loop5 1 512
/dev/loop3 0 0 0 0 /mnt/data/linux-block/loop3 1 512
+ sleep 1
+ mkfs.xfs -f /dev/loop8
meta-data=/dev/loop8 isize=512 agcount=4, agsize=131072 blks
= sectsz=512 attr=2, projid32bit=1
= crc=1 finobt=1, sparse=1, rmapbt=0
= reflink=1 bigtime=0
data = bsize=4096 blocks=524288, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0, ftype=1
log =internal log bsize=4096 blocks=2560, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
Discarding blocks...Done.
+ mount /dev/loop8 /mnt/loop8
+ for attr in offset sizelimit autoclear partscan dio
+ echo -n 'cat /sys/block/loop8/loop/offset : '
cat /sys/block/loop8/loop/offset : + cat /sys/block/loop8/loop/offset
0
+ for attr in offset sizelimit autoclear partscan dio
+ echo -n 'cat /sys/block/loop8/loop/sizelimit : '
cat /sys/block/loop8/loop/sizelimit : + cat /sys/block/loop8/loop/sizelimit
0
+ for attr in offset sizelimit autoclear partscan dio
+ echo -n 'cat /sys/block/loop8/loop/autoclear : '
cat /sys/block/loop8/loop/autoclear : + cat /sys/block/loop8/loop/autoclear
0
+ for attr in offset sizelimit autoclear partscan dio
+ echo -n 'cat /sys/block/loop8/loop/partscan : '
cat /sys/block/loop8/loop/partscan : + cat /sys/block/loop8/loop/partscan
0
+ for attr in offset sizelimit autoclear partscan dio
+ echo -n 'cat /sys/block/loop8/loop/dio : '
cat /sys/block/loop8/loop/dio : + cat /sys/block/loop8/loop/dio
1
+ for i in `shuf -i 1-$NN -n $NN`
+ mkdir -p /mnt/loop1
+ truncate -s 2048M ./loop1
+ /mnt/data/util-linux/losetup --direct-io=on /dev/loop1 ./loop1
+ /mnt/data/util-linux/losetup
NAME SIZELIMIT OFFSET AUTOCLEAR RO BACK-FILE DIO LOG-SEC
/dev/loop1 0 0 0 0 /mnt/data/linux-block/loop1 1 512
/dev/loop8 0 0 0 0 /mnt/data/linux-block/loop8 1 512
/dev/loop5 0 0 0 0 /mnt/data/linux-block/loop5 1 512
/dev/loop3 0 0 0 0 /mnt/data/linux-block/loop3 1 512
+ sleep 1
+ mkfs.xfs -f /dev/loop1
meta-data=/dev/loop1 isize=512 agcount=4, agsize=131072 blks
= sectsz=512 attr=2, projid32bit=1
= crc=1 finobt=1, sparse=1, rmapbt=0
= reflink=1 bigtime=0
data = bsize=4096 blocks=524288, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0, ftype=1
log =internal log bsize=4096 blocks=2560, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
Discarding blocks...Done.
+ mount /dev/loop1 /mnt/loop1
+ for attr in offset sizelimit autoclear partscan dio
+ echo -n 'cat /sys/block/loop1/loop/offset : '
cat /sys/block/loop1/loop/offset : + cat /sys/block/loop1/loop/offset
0
+ for attr in offset sizelimit autoclear partscan dio
+ echo -n 'cat /sys/block/loop1/loop/sizelimit : '
cat /sys/block/loop1/loop/sizelimit : + cat /sys/block/loop1/loop/sizelimit
0
+ for attr in offset sizelimit autoclear partscan dio
+ echo -n 'cat /sys/block/loop1/loop/autoclear : '
cat /sys/block/loop1/loop/autoclear : + cat /sys/block/loop1/loop/autoclear
0
+ for attr in offset sizelimit autoclear partscan dio
+ echo -n 'cat /sys/block/loop1/loop/partscan : '
cat /sys/block/loop1/loop/partscan : + cat /sys/block/loop1/loop/partscan
0
+ for attr in offset sizelimit autoclear partscan dio
+ echo -n 'cat /sys/block/loop1/loop/dio : '
cat /sys/block/loop1/loop/dio : + cat /sys/block/loop1/loop/dio
1
+ for i in `shuf -i 1-$NN -n $NN`
+ mkdir -p /mnt/loop6
+ truncate -s 2048M ./loop6
+ /mnt/data/util-linux/losetup --direct-io=on /dev/loop6 ./loop6
+ /mnt/data/util-linux/losetup
NAME SIZELIMIT OFFSET AUTOCLEAR RO BACK-FILE DIO LOG-SEC
/dev/loop1 0 0 0 0 /mnt/data/linux-block/loop1 1 512
/dev/loop8 0 0 0 0 /mnt/data/linux-block/loop8 1 512
/dev/loop6 0 0 0 0 /mnt/data/linux-block/loop6 1 512
/dev/loop5 0 0 0 0 /mnt/data/linux-block/loop5 1 512
/dev/loop3 0 0 0 0 /mnt/data/linux-block/loop3 1 512
+ sleep 1
+ mkfs.xfs -f /dev/loop6
meta-data=/dev/loop6 isize=512 agcount=4, agsize=131072 blks
= sectsz=512 attr=2, projid32bit=1
= crc=1 finobt=1, sparse=1, rmapbt=0
= reflink=1 bigtime=0
data = bsize=4096 blocks=524288, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0, ftype=1
log =internal log bsize=4096 blocks=2560, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
Discarding blocks...Done.
+ mount /dev/loop6 /mnt/loop6
+ for attr in offset sizelimit autoclear partscan dio
+ echo -n 'cat /sys/block/loop6/loop/offset : '
cat /sys/block/loop6/loop/offset : + cat /sys/block/loop6/loop/offset
0
+ for attr in offset sizelimit autoclear partscan dio
+ echo -n 'cat /sys/block/loop6/loop/sizelimit : '
cat /sys/block/loop6/loop/sizelimit : + cat /sys/block/loop6/loop/sizelimit
0
+ for attr in offset sizelimit autoclear partscan dio
+ echo -n 'cat /sys/block/loop6/loop/autoclear : '
cat /sys/block/loop6/loop/autoclear : + cat /sys/block/loop6/loop/autoclear
0
+ for attr in offset sizelimit autoclear partscan dio
+ echo -n 'cat /sys/block/loop6/loop/partscan : '
cat /sys/block/loop6/loop/partscan : + cat /sys/block/loop6/loop/partscan
0
+ for attr in offset sizelimit autoclear partscan dio
+ echo -n 'cat /sys/block/loop6/loop/dio : '
cat /sys/block/loop6/loop/dio : + cat /sys/block/loop6/loop/dio
1
+ for i in `shuf -i 1-$NN -n $NN`
+ mkdir -p /mnt/loop7
+ truncate -s 2048M ./loop7
+ /mnt/data/util-linux/losetup --direct-io=on /dev/loop7 ./loop7
+ /mnt/data/util-linux/losetup
NAME SIZELIMIT OFFSET AUTOCLEAR RO BACK-FILE DIO LOG-SEC
/dev/loop1 0 0 0 0 /mnt/data/linux-block/loop1 1 512
/dev/loop8 0 0 0 0 /mnt/data/linux-block/loop8 1 512
/dev/loop6 0 0 0 0 /mnt/data/linux-block/loop6 1 512
/dev/loop7 0 0 0 0 /mnt/data/linux-block/loop7 1 512
/dev/loop5 0 0 0 0 /mnt/data/linux-block/loop5 1 512
/dev/loop3 0 0 0 0 /mnt/data/linux-block/loop3 1 512
+ sleep 1
+ mkfs.xfs -f /dev/loop7
meta-data=/dev/loop7 isize=512 agcount=4, agsize=131072 blks
= sectsz=512 attr=2, projid32bit=1
= crc=1 finobt=1, sparse=1, rmapbt=0
= reflink=1 bigtime=0
data = bsize=4096 blocks=524288, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0, ftype=1
log =internal log bsize=4096 blocks=2560, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
Discarding blocks...Done.
+ mount /dev/loop7 /mnt/loop7
+ for attr in offset sizelimit autoclear partscan dio
+ echo -n 'cat /sys/block/loop7/loop/offset : '
cat /sys/block/loop7/loop/offset : + cat /sys/block/loop7/loop/offset
0
+ for attr in offset sizelimit autoclear partscan dio
+ echo -n 'cat /sys/block/loop7/loop/sizelimit : '
cat /sys/block/loop7/loop/sizelimit : + cat /sys/block/loop7/loop/sizelimit
0
+ for attr in offset sizelimit autoclear partscan dio
+ echo -n 'cat /sys/block/loop7/loop/autoclear : '
cat /sys/block/loop7/loop/autoclear : + cat /sys/block/loop7/loop/autoclear
0
+ for attr in offset sizelimit autoclear partscan dio
+ echo -n 'cat /sys/block/loop7/loop/partscan : '
cat /sys/block/loop7/loop/partscan : + cat /sys/block/loop7/loop/partscan
0
+ for attr in offset sizelimit autoclear partscan dio
+ echo -n 'cat /sys/block/loop7/loop/dio : '
cat /sys/block/loop7/loop/dio : + cat /sys/block/loop7/loop/dio
1
+ for i in `shuf -i 1-$NN -n $NN`
+ mkdir -p /mnt/loop9
+ truncate -s 2048M ./loop9
+ /mnt/data/util-linux/losetup --direct-io=on /dev/loop9 ./loop9
+ /mnt/data/util-linux/losetup
NAME SIZELIMIT OFFSET AUTOCLEAR RO BACK-FILE DIO LOG-SEC
/dev/loop1 0 0 0 0 /mnt/data/linux-block/loop1 1 512
/dev/loop8 0 0 0 0 /mnt/data/linux-block/loop8 1 512
/dev/loop6 0 0 0 0 /mnt/data/linux-block/loop6 1 512
/dev/loop9 0 0 0 0 /mnt/data/linux-block/loop9 1 512
/dev/loop7 0 0 0 0 /mnt/data/linux-block/loop7 1 512
/dev/loop5 0 0 0 0 /mnt/data/linux-block/loop5 1 512
/dev/loop3 0 0 0 0 /mnt/data/linux-block/loop3 1 512
+ sleep 1
+ mkfs.xfs -f /dev/loop9
meta-data=/dev/loop9 isize=512 agcount=4, agsize=131072 blks
= sectsz=512 attr=2, projid32bit=1
= crc=1 finobt=1, sparse=1, rmapbt=0
= reflink=1 bigtime=0
data = bsize=4096 blocks=524288, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0, ftype=1
log =internal log bsize=4096 blocks=2560, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
Discarding blocks...Done.
+ mount /dev/loop9 /mnt/loop9
+ for attr in offset sizelimit autoclear partscan dio
+ echo -n 'cat /sys/block/loop9/loop/offset : '
cat /sys/block/loop9/loop/offset : + cat /sys/block/loop9/loop/offset
0
+ for attr in offset sizelimit autoclear partscan dio
+ echo -n 'cat /sys/block/loop9/loop/sizelimit : '
cat /sys/block/loop9/loop/sizelimit : + cat /sys/block/loop9/loop/sizelimit
0
+ for attr in offset sizelimit autoclear partscan dio
+ echo -n 'cat /sys/block/loop9/loop/autoclear : '
cat /sys/block/loop9/loop/autoclear : + cat /sys/block/loop9/loop/autoclear
0
+ for attr in offset sizelimit autoclear partscan dio
+ echo -n 'cat /sys/block/loop9/loop/partscan : '
cat /sys/block/loop9/loop/partscan : + cat /sys/block/loop9/loop/partscan
0
+ for attr in offset sizelimit autoclear partscan dio
+ echo -n 'cat /sys/block/loop9/loop/dio : '
cat /sys/block/loop9/loop/dio : + cat /sys/block/loop9/loop/dio
1
+ for i in `shuf -i 1-$NN -n $NN`
+ mkdir -p /mnt/loop10
+ truncate -s 2048M ./loop10
+ /mnt/data/util-linux/losetup --direct-io=on /dev/loop10 ./loop10
+ /mnt/data/util-linux/losetup
NAME SIZELIMIT OFFSET AUTOCLEAR RO BACK-FILE DIO LOG-SEC
/dev/loop1 0 0 0 0 /mnt/data/linux-block/loop1 1 512
/dev/loop8 0 0 0 0 /mnt/data/linux-block/loop8 1 512
/dev/loop6 0 0 0 0 /mnt/data/linux-block/loop6 1 512
/dev/loop9 0 0 0 0 /mnt/data/linux-block/loop9 1 512
/dev/loop7 0 0 0 0 /mnt/data/linux-block/loop7 1 512
/dev/loop5 0 0 0 0 /mnt/data/linux-block/loop5 1 512
/dev/loop3 0 0 0 0 /mnt/data/linux-block/loop3 1 512
/dev/loop10 0 0 0 0 /mnt/data/linux-block/loop10 1 512
+ sleep 1
+ mkfs.xfs -f /dev/loop10
meta-data=/dev/loop10 isize=512 agcount=4, agsize=131072 blks
= sectsz=512 attr=2, projid32bit=1
= crc=1 finobt=1, sparse=1, rmapbt=0
= reflink=1 bigtime=0
data = bsize=4096 blocks=524288, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0, ftype=1
log =internal log bsize=4096 blocks=2560, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
Discarding blocks...Done.
+ mount /dev/loop10 /mnt/loop10
+ for attr in offset sizelimit autoclear partscan dio
+ echo -n 'cat /sys/block/loop10/loop/offset : '
cat /sys/block/loop10/loop/offset : + cat /sys/block/loop10/loop/offset
0
+ for attr in offset sizelimit autoclear partscan dio
+ echo -n 'cat /sys/block/loop10/loop/sizelimit : '
cat /sys/block/loop10/loop/sizelimit : + cat /sys/block/loop10/loop/sizelimit
0
+ for attr in offset sizelimit autoclear partscan dio
+ echo -n 'cat /sys/block/loop10/loop/autoclear : '
cat /sys/block/loop10/loop/autoclear : + cat /sys/block/loop10/loop/autoclear
0
+ for attr in offset sizelimit autoclear partscan dio
+ echo -n 'cat /sys/block/loop10/loop/partscan : '
cat /sys/block/loop10/loop/partscan : + cat /sys/block/loop10/loop/partscan
0
+ for attr in offset sizelimit autoclear partscan dio
+ echo -n 'cat /sys/block/loop10/loop/dio : '
cat /sys/block/loop10/loop/dio : + cat /sys/block/loop10/loop/dio
1
+ for i in `shuf -i 1-$NN -n $NN`
+ mkdir -p /mnt/loop4
+ truncate -s 2048M ./loop4
+ /mnt/data/util-linux/losetup --direct-io=on /dev/loop4 ./loop4
+ /mnt/data/util-linux/losetup
NAME SIZELIMIT OFFSET AUTOCLEAR RO BACK-FILE DIO LOG-SEC
/dev/loop1 0 0 0 0 /mnt/data/linux-block/loop1 1 512
/dev/loop8 0 0 0 0 /mnt/data/linux-block/loop8 1 512
/dev/loop6 0 0 0 0 /mnt/data/linux-block/loop6 1 512
/dev/loop4 0 0 0 0 /mnt/data/linux-block/loop4 1 512
/dev/loop9 0 0 0 0 /mnt/data/linux-block/loop9 1 512
/dev/loop7 0 0 0 0 /mnt/data/linux-block/loop7 1 512
/dev/loop5 0 0 0 0 /mnt/data/linux-block/loop5 1 512
/dev/loop3 0 0 0 0 /mnt/data/linux-block/loop3 1 512
/dev/loop10 0 0 0 0 /mnt/data/linux-block/loop10 1 512
+ sleep 1
+ mkfs.xfs -f /dev/loop4
meta-data=/dev/loop4 isize=512 agcount=4, agsize=131072 blks
= sectsz=512 attr=2, projid32bit=1
= crc=1 finobt=1, sparse=1, rmapbt=0
= reflink=1 bigtime=0
data = bsize=4096 blocks=524288, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0, ftype=1
log =internal log bsize=4096 blocks=2560, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
Discarding blocks...Done.
+ mount /dev/loop4 /mnt/loop4
+ for attr in offset sizelimit autoclear partscan dio
+ echo -n 'cat /sys/block/loop4/loop/offset : '
cat /sys/block/loop4/loop/offset : + cat /sys/block/loop4/loop/offset
0
+ for attr in offset sizelimit autoclear partscan dio
+ echo -n 'cat /sys/block/loop4/loop/sizelimit : '
cat /sys/block/loop4/loop/sizelimit : + cat /sys/block/loop4/loop/sizelimit
0
+ for attr in offset sizelimit autoclear partscan dio
+ echo -n 'cat /sys/block/loop4/loop/autoclear : '
cat /sys/block/loop4/loop/autoclear : + cat /sys/block/loop4/loop/autoclear
0
+ for attr in offset sizelimit autoclear partscan dio
+ echo -n 'cat /sys/block/loop4/loop/partscan : '
cat /sys/block/loop4/loop/partscan : + cat /sys/block/loop4/loop/partscan
0
+ for attr in offset sizelimit autoclear partscan dio
+ echo -n 'cat /sys/block/loop4/loop/dio : '
cat /sys/block/loop4/loop/dio : + cat /sys/block/loop4/loop/dio
1
+ for i in `shuf -i 1-$NN -n $NN`
+ mkdir -p /mnt/loop2
+ truncate -s 2048M ./loop2
+ /mnt/data/util-linux/losetup --direct-io=on /dev/loop2 ./loop2
+ /mnt/data/util-linux/losetup
NAME SIZELIMIT OFFSET AUTOCLEAR RO BACK-FILE DIO LOG-SEC
/dev/loop1 0 0 0 0 /mnt/data/linux-block/loop1 1 512
/dev/loop8 0 0 0 0 /mnt/data/linux-block/loop8 1 512
/dev/loop6 0 0 0 0 /mnt/data/linux-block/loop6 1 512
/dev/loop4 0 0 0 0 /mnt/data/linux-block/loop4 1 512
/dev/loop2 0 0 0 0 /mnt/data/linux-block/loop2 1 512
/dev/loop9 0 0 0 0 /mnt/data/linux-block/loop9 1 512
/dev/loop7 0 0 0 0 /mnt/data/linux-block/loop7 1 512
/dev/loop5 0 0 0 0 /mnt/data/linux-block/loop5 1 512
/dev/loop3 0 0 0 0 /mnt/data/linux-block/loop3 1 512
/dev/loop10 0 0 0 0 /mnt/data/linux-block/loop10 1 512
+ sleep 1
+ mkfs.xfs -f /dev/loop2
meta-data=/dev/loop2 isize=512 agcount=4, agsize=131072 blks
= sectsz=512 attr=2, projid32bit=1
= crc=1 finobt=1, sparse=1, rmapbt=0
= reflink=1 bigtime=0
data = bsize=4096 blocks=524288, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0, ftype=1
log =internal log bsize=4096 blocks=2560, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
Discarding blocks...Done.
+ mount /dev/loop2 /mnt/loop2
+ for attr in offset sizelimit autoclear partscan dio
+ echo -n 'cat /sys/block/loop2/loop/offset : '
cat /sys/block/loop2/loop/offset : + cat /sys/block/loop2/loop/offset
0
+ for attr in offset sizelimit autoclear partscan dio
+ echo -n 'cat /sys/block/loop2/loop/sizelimit : '
cat /sys/block/loop2/loop/sizelimit : + cat /sys/block/loop2/loop/sizelimit
0
+ for attr in offset sizelimit autoclear partscan dio
+ echo -n 'cat /sys/block/loop2/loop/autoclear : '
cat /sys/block/loop2/loop/autoclear : + cat /sys/block/loop2/loop/autoclear
0
+ for attr in offset sizelimit autoclear partscan dio
+ echo -n 'cat /sys/block/loop2/loop/partscan : '
cat /sys/block/loop2/loop/partscan : + cat /sys/block/loop2/loop/partscan
0
+ for attr in offset sizelimit autoclear partscan dio
+ echo -n 'cat /sys/block/loop2/loop/dio : '
cat /sys/block/loop2/loop/dio : + cat /sys/block/loop2/loop/dio
1
+ mount
+ grep loop
/dev/loop3 on /mnt/loop3 type xfs (rw,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquota)
/dev/loop5 on /mnt/loop5 type xfs (rw,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquota)
/dev/loop8 on /mnt/loop8 type xfs (rw,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquota)
/dev/loop1 on /mnt/loop1 type xfs (rw,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquota)
/dev/loop6 on /mnt/loop6 type xfs (rw,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquota)
/dev/loop7 on /mnt/loop7 type xfs (rw,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquota)
/dev/loop9 on /mnt/loop9 type xfs (rw,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquota)
/dev/loop10 on /mnt/loop10 type xfs (rw,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquota)
/dev/loop4 on /mnt/loop4 type xfs (rw,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquota)
/dev/loop2 on /mnt/loop2 type xfs (rw,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquota)
+ dmesg -c
[ 393.458294] loop: loading out-of-tree module taints kernel.
[ 393.540886] loop: module loaded
[ 393.620402] loop3: detected capacity change from 0 to 4194304
[ 394.829398] XFS (loop3): Mounting V5 Filesystem
[ 394.842638] XFS (loop3): Ending clean mount
[ 394.847922] xfs filesystem being mounted at /mnt/loop3 supports timestamps until 2038 (0x7fffffff)
[ 394.934725] loop5: detected capacity change from 0 to 4194304
[ 396.106115] XFS (loop5): Mounting V5 Filesystem
[ 396.119749] XFS (loop5): Ending clean mount
[ 396.125172] xfs filesystem being mounted at /mnt/loop5 supports timestamps until 2038 (0x7fffffff)
[ 396.208703] loop8: detected capacity change from 0 to 4194304
[ 397.396155] XFS (loop8): Mounting V5 Filesystem
[ 397.410363] XFS (loop8): Ending clean mount
[ 397.415509] xfs filesystem being mounted at /mnt/loop8 supports timestamps until 2038 (0x7fffffff)
[ 397.501311] loop1: detected capacity change from 0 to 4194304
[ 398.688110] XFS (loop1): Mounting V5 Filesystem
[ 398.699181] XFS (loop1): Ending clean mount
[ 398.703940] xfs filesystem being mounted at /mnt/loop1 supports timestamps until 2038 (0x7fffffff)
[ 398.788759] loop6: detected capacity change from 0 to 4194304
[ 399.973379] XFS (loop6): Mounting V5 Filesystem
[ 399.988682] XFS (loop6): Ending clean mount
[ 399.993727] xfs filesystem being mounted at /mnt/loop6 supports timestamps until 2038 (0x7fffffff)
[ 400.079434] loop7: detected capacity change from 0 to 4194304
[ 401.250967] XFS (loop7): Mounting V5 Filesystem
[ 401.270141] XFS (loop7): Ending clean mount
[ 401.276262] xfs filesystem being mounted at /mnt/loop7 supports timestamps until 2038 (0x7fffffff)
[ 401.365259] loop9: detected capacity change from 0 to 4194304
[ 402.553512] XFS (loop9): Mounting V5 Filesystem
[ 402.568126] XFS (loop9): Ending clean mount
[ 402.573195] xfs filesystem being mounted at /mnt/loop9 supports timestamps until 2038 (0x7fffffff)
[ 402.659757] loop10: detected capacity change from 0 to 4194304
[ 403.837513] XFS (loop10): Mounting V5 Filesystem
[ 403.851346] XFS (loop10): Ending clean mount
[ 403.856538] xfs filesystem being mounted at /mnt/loop10 supports timestamps until 2038 (0x7fffffff)
[ 403.941934] loop4: detected capacity change from 0 to 4194304
[ 405.140678] XFS (loop4): Mounting V5 Filesystem
[ 405.155299] XFS (loop4): Ending clean mount
[ 405.161178] xfs filesystem being mounted at /mnt/loop4 supports timestamps until 2038 (0x7fffffff)
[ 405.241040] loop2: detected capacity change from 0 to 4194304
[ 406.421351] XFS (loop2): Mounting V5 Filesystem
[ 406.435965] XFS (loop2): Ending clean mount
[ 406.441333] xfs filesystem being mounted at /mnt/loop2 supports timestamps until 2038 (0x7fffffff)
+ df -h /mnt/loop1 /mnt/loop10 /mnt/loop2 /mnt/loop3 /mnt/loop4 /mnt/loop5 /mnt/loop6 /mnt/loop7 /mnt/loop8 /mnt/loop9
Filesystem Size Used Avail Use% Mounted on
/dev/loop1 2.0G 47M 2.0G 3% /mnt/loop1
/dev/loop10 2.0G 47M 2.0G 3% /mnt/loop10
/dev/loop2 2.0G 47M 2.0G 3% /mnt/loop2
/dev/loop3 2.0G 47M 2.0G 3% /mnt/loop3
/dev/loop4 2.0G 47M 2.0G 3% /mnt/loop4
/dev/loop5 2.0G 47M 2.0G 3% /mnt/loop5
/dev/loop6 2.0G 47M 2.0G 3% /mnt/loop6
/dev/loop7 2.0G 47M 2.0G 3% /mnt/loop7
/dev/loop8 2.0G 47M 2.0G 3% /mnt/loop8
/dev/loop9 2.0G 47M 2.0G 3% /mnt/loop9
++ shuf -i 1-10 -n 10
+ for i in `shuf -i 1-$NN -n $NN`
+ fallocate -o 0 -l 524288000 /mnt/loop6/testfile
+ fio fio/verify.fio --filename=/mnt/loop6/testfile
write-and-verify: (g=0): rw=randwrite, bs=(R) 4096B-4096B, (W) 4096B-4096B, (T) 4096B-4096B, ioengine=libaio, iodepth=16
fio-3.27
Starting 1 process
Jobs: 1 (f=1): [V(1)][82.3%][r=21.1MiB/s][r=5408 IOPS][eta 00m:11s]
write-and-verify: (groupid=0, jobs=1): err= 0: pid=3402: Wed Sep 22 18:34:50 2021
read: IOPS=5070, BW=19.8MiB/s (20.8MB/s)(316MiB/15977msec)
slat (usec): min=7, max=176, avg= 9.06, stdev= 4.59
clat (usec): min=337, max=7371, avg=3144.59, stdev=533.23
lat (usec): min=387, max=7379, avg=3153.75, stdev=533.19
clat percentiles (usec):
| 1.00th=[ 2245], 5.00th=[ 2311], 10.00th=[ 2343], 20.00th=[ 2769],
| 30.00th=[ 3032], 40.00th=[ 3163], 50.00th=[ 3195], 60.00th=[ 3228],
| 70.00th=[ 3261], 80.00th=[ 3425], 90.00th=[ 3621], 95.00th=[ 3720],
| 99.00th=[ 5735], 99.50th=[ 6128], 99.90th=[ 6652], 99.95th=[ 6783],
| 99.99th=[ 7242]
write: IOPS=3651, BW=14.3MiB/s (15.0MB/s)(500MiB/35055msec); 0 zone resets
slat (usec): min=9, max=1339, avg=25.07, stdev=10.18
clat (usec): min=855, max=92115, avg=4355.14, stdev=1660.56
lat (usec): min=886, max=92137, avg=4380.40, stdev=1661.03
clat percentiles (usec):
| 1.00th=[ 2245], 5.00th=[ 2507], 10.00th=[ 2737], 20.00th=[ 3556],
| 30.00th=[ 4047], 40.00th=[ 4293], 50.00th=[ 4424], 60.00th=[ 4621],
| 70.00th=[ 4817], 80.00th=[ 5014], 90.00th=[ 5342], 95.00th=[ 5604],
| 99.00th=[ 7570], 99.50th=[ 8160], 99.90th=[14746], 99.95th=[29492],
| 99.99th=[90702]
bw ( KiB/s): min= 552, max=18072, per=98.74%, avg=14422.54, stdev=2180.44, samples=71
iops : min= 138, max= 4518, avg=3605.63, stdev=545.11, samples=71
lat (usec) : 500=0.01%, 1000=0.01%
lat (msec) : 2=0.15%, 4=55.33%, 10=44.39%, 20=0.08%, 50=0.04%
lat (msec) : 100=0.01%
cpu : usr=2.66%, sys=9.36%, ctx=201397, majf=0, minf=1915
IO depths : 1=0.1%, 2=0.1%, 4=0.1%, 8=0.1%, 16=100.0%, 32=0.0%, >=64=0.0%
submit : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0%
complete : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.1%, 32=0.0%, 64=0.0%, >=64=0.0%
issued rwts: total=81011,128000,0,0 short=0,0,0,0 dropped=0,0,0,0
latency : target=0, window=0, percentile=100.00%, depth=16
Run status group 0 (all jobs):
READ: bw=19.8MiB/s (20.8MB/s), 19.8MiB/s-19.8MiB/s (20.8MB/s-20.8MB/s), io=316MiB (332MB), run=15977-15977msec
WRITE: bw=14.3MiB/s (15.0MB/s), 14.3MiB/s-14.3MiB/s (15.0MB/s-15.0MB/s), io=500MiB (524MB), run=35055-35055msec
Disk stats (read/write):
loop6: ios=80080/128129, merge=0/1, ticks=251747/552688, in_queue=804671, util=99.82%
+ for i in `shuf -i 1-$NN -n $NN`
+ fallocate -o 0 -l 524288000 /mnt/loop5/testfile
+ fio fio/verify.fio --filename=/mnt/loop5/testfile
write-and-verify: (g=0): rw=randwrite, bs=(R) 4096B-4096B, (W) 4096B-4096B, (T) 4096B-4096B, ioengine=libaio, iodepth=16
fio-3.27
Starting 1 process
Jobs: 1 (f=1): [V(1)][82.5%][r=19.3MiB/s][r=4930 IOPS][eta 00m:11s]
write-and-verify: (groupid=0, jobs=1): err= 0: pid=3680: Wed Sep 22 18:35:41 2021
read: IOPS=5023, BW=19.6MiB/s (20.6MB/s)(316MiB/16086msec)
slat (usec): min=7, max=186, avg= 9.33, stdev= 4.56
clat (usec): min=341, max=35583, avg=3174.20, stdev=661.43
lat (usec): min=386, max=35591, avg=3183.62, stdev=661.41
clat percentiles (usec):
| 1.00th=[ 2245], 5.00th=[ 2343], 10.00th=[ 2376], 20.00th=[ 2835],
| 30.00th=[ 3130], 40.00th=[ 3195], 50.00th=[ 3195], 60.00th=[ 3228],
| 70.00th=[ 3294], 80.00th=[ 3458], 90.00th=[ 3621], 95.00th=[ 3720],
| 99.00th=[ 5538], 99.50th=[ 6063], 99.90th=[ 6521], 99.95th=[ 6783],
| 99.99th=[32375]
write: IOPS=3669, BW=14.3MiB/s (15.0MB/s)(500MiB/34881msec); 0 zone resets
slat (usec): min=9, max=905, avg=25.26, stdev=10.05
clat (usec): min=729, max=94797, avg=4333.32, stdev=1536.34
lat (usec): min=758, max=94828, avg=4358.76, stdev=1536.86
clat percentiles (usec):
| 1.00th=[ 2212], 5.00th=[ 2507], 10.00th=[ 2769], 20.00th=[ 3621],
| 30.00th=[ 4015], 40.00th=[ 4228], 50.00th=[ 4424], 60.00th=[ 4555],
| 70.00th=[ 4752], 80.00th=[ 4948], 90.00th=[ 5276], 95.00th=[ 5604],
| 99.00th=[ 7570], 99.50th=[ 8094], 99.90th=[15401], 99.95th=[20841],
| 99.99th=[93848]
bw ( KiB/s): min=10744, max=18848, per=99.66%, avg=14628.11, stdev=1301.02, samples=70
iops : min= 2686, max= 4712, avg=3657.03, stdev=325.25, samples=70
lat (usec) : 500=0.01%, 750=0.01%, 1000=0.01%
lat (msec) : 2=0.18%, 4=55.48%, 10=44.18%, 20=0.11%, 50=0.04%
lat (msec) : 100=0.01%
cpu : usr=2.65%, sys=9.47%, ctx=201446, majf=0, minf=1910
IO depths : 1=0.1%, 2=0.1%, 4=0.1%, 8=0.1%, 16=100.0%, 32=0.0%, >=64=0.0%
submit : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0%
complete : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.1%, 32=0.0%, 64=0.0%, >=64=0.0%
issued rwts: total=80801,128000,0,0 short=0,0,0,0 dropped=0,0,0,0
latency : target=0, window=0, percentile=100.00%, depth=16
Run status group 0 (all jobs):
READ: bw=19.6MiB/s (20.6MB/s), 19.6MiB/s-19.6MiB/s (20.6MB/s-20.6MB/s), io=316MiB (331MB), run=16086-16086msec
WRITE: bw=14.3MiB/s (15.0MB/s), 14.3MiB/s-14.3MiB/s (15.0MB/s-15.0MB/s), io=500MiB (524MB), run=34881-34881msec
Disk stats (read/write):
loop5: ios=80061/128091, merge=0/1, ticks=253649/549027, in_queue=802813, util=99.89%
+ for i in `shuf -i 1-$NN -n $NN`
+ fallocate -o 0 -l 524288000 /mnt/loop7/testfile
+ fio fio/verify.fio --filename=/mnt/loop7/testfile
write-and-verify: (g=0): rw=randwrite, bs=(R) 4096B-4096B, (W) 4096B-4096B, (T) 4096B-4096B, ioengine=libaio, iodepth=16
fio-3.27
Starting 1 process
Jobs: 1 (f=1): [V(1)][81.2%][r=19.1MiB/s][r=4883 IOPS][eta 00m:12s]
write-and-verify: (groupid=0, jobs=1): err= 0: pid=3742: Wed Sep 22 18:36:33 2021
read: IOPS=4949, BW=19.3MiB/s (20.3MB/s)(316MiB/16332msec)
slat (usec): min=7, max=244, avg= 8.99, stdev= 5.03
clat (usec): min=344, max=16615, avg=3221.85, stdev=631.29
lat (usec): min=391, max=16624, avg=3230.92, stdev=631.52
clat percentiles (usec):
| 1.00th=[ 2278], 5.00th=[ 2311], 10.00th=[ 2474], 20.00th=[ 2868],
| 30.00th=[ 3163], 40.00th=[ 3195], 50.00th=[ 3195], 60.00th=[ 3228],
| 70.00th=[ 3294], 80.00th=[ 3458], 90.00th=[ 3621], 95.00th=[ 3752],
| 99.00th=[ 6128], 99.50th=[ 7242], 99.90th=[ 8455], 99.95th=[ 9765],
| 99.99th=[12911]
write: IOPS=3583, BW=14.0MiB/s (14.7MB/s)(500MiB/35723msec); 0 zone resets
slat (usec): min=8, max=1302, avg=24.69, stdev= 9.99
clat (usec): min=532, max=54345, avg=4439.08, stdev=1260.87
lat (usec): min=567, max=54365, avg=4463.96, stdev=1261.39
clat percentiles (usec):
| 1.00th=[ 2278], 5.00th=[ 2573], 10.00th=[ 2966], 20.00th=[ 3851],
| 30.00th=[ 4146], 40.00th=[ 4359], 50.00th=[ 4490], 60.00th=[ 4686],
| 70.00th=[ 4817], 80.00th=[ 5014], 90.00th=[ 5276], 95.00th=[ 5669],
| 99.00th=[ 7570], 99.50th=[ 8225], 99.90th=[17957], 99.95th=[26608],
| 99.99th=[33424]
bw ( KiB/s): min= 5400, max=16944, per=99.23%, avg=14222.22, stdev=1447.88, samples=72
iops : min= 1350, max= 4236, avg=3555.56, stdev=361.97, samples=72
lat (usec) : 500=0.01%, 750=0.01%, 1000=0.01%
lat (msec) : 2=0.14%, 4=52.68%, 10=47.00%, 20=0.14%, 50=0.04%
lat (msec) : 100=0.01%
cpu : usr=2.63%, sys=8.99%, ctx=201428, majf=0, minf=1910
IO depths : 1=0.1%, 2=0.1%, 4=0.1%, 8=0.1%, 16=100.0%, 32=0.0%, >=64=0.0%
submit : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0%
complete : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.1%, 32=0.0%, 64=0.0%, >=64=0.0%
issued rwts: total=80836,128000,0,0 short=0,0,0,0 dropped=0,0,0,0
latency : target=0, window=0, percentile=100.00%, depth=16
Run status group 0 (all jobs):
READ: bw=19.3MiB/s (20.3MB/s), 19.3MiB/s-19.3MiB/s (20.3MB/s-20.3MB/s), io=316MiB (331MB), run=16332-16332msec
WRITE: bw=14.0MiB/s (14.7MB/s), 14.0MiB/s-14.0MiB/s (14.7MB/s-14.7MB/s), io=500MiB (524MB), run=35723-35723msec
Disk stats (read/write):
loop7: ios=79753/128204, merge=0/1, ticks=256630/564437, in_queue=821344, util=99.84%
+ for i in `shuf -i 1-$NN -n $NN`
+ fallocate -o 0 -l 524288000 /mnt/loop10/testfile
+ fio fio/verify.fio --filename=/mnt/loop10/testfile
write-and-verify: (g=0): rw=randwrite, bs=(R) 4096B-4096B, (W) 4096B-4096B, (T) 4096B-4096B, ioengine=libaio, iodepth=16
fio-3.27
Starting 1 process
Jobs: 1 (f=1): [V(1)][81.0%][r=18.7MiB/s][r=4780 IOPS][eta 00m:12s]
write-and-verify: (groupid=0, jobs=1): err= 0: pid=3783: Wed Sep 22 18:37:25 2021
read: IOPS=4974, BW=19.4MiB/s (20.4MB/s)(316MiB/16257msec)
slat (usec): min=7, max=171, avg= 9.23, stdev= 5.34
clat (usec): min=290, max=54228, avg=3205.30, stdev=793.73
lat (usec): min=337, max=54237, avg=3214.62, stdev=793.53
clat percentiles (usec):
| 1.00th=[ 2212], 5.00th=[ 2311], 10.00th=[ 2704], 20.00th=[ 3064],
| 30.00th=[ 3130], 40.00th=[ 3163], 50.00th=[ 3195], 60.00th=[ 3195],
| 70.00th=[ 3294], 80.00th=[ 3425], 90.00th=[ 3556], 95.00th=[ 3654],
| 99.00th=[ 5407], 99.50th=[ 6063], 99.90th=[ 6521], 99.95th=[ 6652],
| 99.99th=[46400]
write: IOPS=3628, BW=14.2MiB/s (14.9MB/s)(500MiB/35280msec); 0 zone resets
slat (usec): min=8, max=931, avg=25.05, stdev= 8.99
clat (usec): min=669, max=55424, avg=4383.41, stdev=1213.07
lat (usec): min=688, max=55453, avg=4408.65, stdev=1213.59
clat percentiles (usec):
| 1.00th=[ 2278], 5.00th=[ 2540], 10.00th=[ 2835], 20.00th=[ 3785],
| 30.00th=[ 4113], 40.00th=[ 4293], 50.00th=[ 4490], 60.00th=[ 4621],
| 70.00th=[ 4817], 80.00th=[ 5014], 90.00th=[ 5211], 95.00th=[ 5538],
| 99.00th=[ 7439], 99.50th=[ 7898], 99.90th=[11863], 99.95th=[21627],
| 99.99th=[53216]
bw ( KiB/s): min= 7496, max=18952, per=99.38%, avg=14422.54, stdev=1517.15, samples=71
iops : min= 1874, max= 4738, avg=3605.63, stdev=379.29, samples=71
lat (usec) : 500=0.01%, 750=0.01%, 1000=0.01%
lat (msec) : 2=0.14%, 4=53.58%, 10=46.18%, 20=0.05%, 50=0.03%
lat (msec) : 100=0.01%
cpu : usr=2.58%, sys=9.30%, ctx=201223, majf=0, minf=1912
IO depths : 1=0.1%, 2=0.1%, 4=0.1%, 8=0.1%, 16=100.0%, 32=0.0%, >=64=0.0%
submit : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0%
complete : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.1%, 32=0.0%, 64=0.0%, >=64=0.0%
issued rwts: total=80871,128000,0,0 short=0,0,0,0 dropped=0,0,0,0
latency : target=0, window=0, percentile=100.00%, depth=16
Run status group 0 (all jobs):
READ: bw=19.4MiB/s (20.4MB/s), 19.4MiB/s-19.4MiB/s (20.4MB/s-20.4MB/s), io=316MiB (331MB), run=16257-16257msec
WRITE: bw=14.2MiB/s (14.9MB/s), 14.2MiB/s-14.2MiB/s (14.9MB/s-14.9MB/s), io=500MiB (524MB), run=35280-35280msec
Disk stats (read/write):
loop10: ios=79636/128108, merge=0/1, ticks=255275/556087, in_queue=811461, util=99.90%
+ for i in `shuf -i 1-$NN -n $NN`
+ fallocate -o 0 -l 524288000 /mnt/loop4/testfile
+ fio fio/verify.fio --filename=/mnt/loop4/testfile
write-and-verify: (g=0): rw=randwrite, bs=(R) 4096B-4096B, (W) 4096B-4096B, (T) 4096B-4096B, ioengine=libaio, iodepth=16
fio-3.27
Starting 1 process
Jobs: 1 (f=1): [V(1)][80.6%][r=21.8MiB/s][r=5580 IOPS][eta 00m:12s]
write-and-verify: (groupid=0, jobs=1): err= 0: pid=3807: Wed Sep 22 18:38:16 2021
read: IOPS=5112, BW=20.0MiB/s (20.9MB/s)(316MiB/15823msec)
slat (usec): min=7, max=833, avg= 9.39, stdev= 7.15
clat (usec): min=326, max=6938, avg=3118.49, stdev=532.66
lat (usec): min=370, max=6954, avg=3127.97, stdev=532.64
clat percentiles (usec):
| 1.00th=[ 2212], 5.00th=[ 2278], 10.00th=[ 2376], 20.00th=[ 2704],
| 30.00th=[ 2999], 40.00th=[ 3163], 50.00th=[ 3195], 60.00th=[ 3228],
| 70.00th=[ 3261], 80.00th=[ 3392], 90.00th=[ 3589], 95.00th=[ 3687],
| 99.00th=[ 5604], 99.50th=[ 5997], 99.90th=[ 6521], 99.95th=[ 6587],
| 99.99th=[ 6718]
write: IOPS=3704, BW=14.5MiB/s (15.2MB/s)(500MiB/34550msec); 0 zone resets
slat (usec): min=8, max=1298, avg=24.80, stdev=10.11
clat (usec): min=487, max=90343, avg=4292.40, stdev=1546.17
lat (usec): min=521, max=90361, avg=4317.38, stdev=1546.87
clat percentiles (usec):
| 1.00th=[ 2212], 5.00th=[ 2474], 10.00th=[ 2704], 20.00th=[ 3523],
| 30.00th=[ 3982], 40.00th=[ 4228], 50.00th=[ 4424], 60.00th=[ 4555],
| 70.00th=[ 4752], 80.00th=[ 4948], 90.00th=[ 5211], 95.00th=[ 5538],
| 99.00th=[ 7504], 99.50th=[ 8029], 99.90th=[11731], 99.95th=[21365],
| 99.99th=[88605]
bw ( KiB/s): min= 480, max=19744, per=98.71%, avg=14628.57, stdev=2236.68, samples=70
iops : min= 120, max= 4936, avg=3657.14, stdev=559.17, samples=70
lat (usec) : 500=0.01%, 750=0.01%, 1000=0.01%
lat (msec) : 2=0.19%, 4=56.53%, 10=43.18%, 20=0.06%, 50=0.02%
lat (msec) : 100=0.01%
cpu : usr=2.69%, sys=9.38%, ctx=200912, majf=0, minf=1911
IO depths : 1=0.1%, 2=0.1%, 4=0.1%, 8=0.1%, 16=100.0%, 32=0.0%, >=64=0.0%
submit : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0%
complete : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.1%, 32=0.0%, 64=0.0%, >=64=0.0%
issued rwts: total=80895,128000,0,0 short=0,0,0,0 dropped=0,0,0,0
latency : target=0, window=0, percentile=100.00%, depth=16
Run status group 0 (all jobs):
READ: bw=20.0MiB/s (20.9MB/s), 20.0MiB/s-20.0MiB/s (20.9MB/s-20.9MB/s), io=316MiB (331MB), run=15823-15823msec
WRITE: bw=14.5MiB/s (15.2MB/s), 14.5MiB/s-14.5MiB/s (15.2MB/s-15.2MB/s), io=500MiB (524MB), run=34550-34550msec
Disk stats (read/write):
loop4: ios=80839/128147, merge=0/1, ticks=251719/544528, in_queue=796409, util=99.85%
+ for i in `shuf -i 1-$NN -n $NN`
+ fallocate -o 0 -l 524288000 /mnt/loop2/testfile
+ fio fio/verify.fio --filename=/mnt/loop2/testfile
write-and-verify: (g=0): rw=randwrite, bs=(R) 4096B-4096B, (W) 4096B-4096B, (T) 4096B-4096B, ioengine=libaio, iodepth=16
fio-3.27
Starting 1 process
Jobs: 1 (f=1): [V(1)][82.0%][r=20.2MiB/s][r=5171 IOPS][eta 00m:11s]
write-and-verify: (groupid=0, jobs=1): err= 0: pid=3865: Wed Sep 22 18:39:06 2021
read: IOPS=5076, BW=19.8MiB/s (20.8MB/s)(316MiB/15950msec)
slat (usec): min=7, max=157, avg= 9.10, stdev= 3.25
clat (usec): min=300, max=27472, avg=3140.74, stdev=629.10
lat (usec): min=347, max=27481, avg=3149.91, stdev=629.04
clat percentiles (usec):
| 1.00th=[ 2245], 5.00th=[ 2343], 10.00th=[ 2376], 20.00th=[ 2737],
| 30.00th=[ 2999], 40.00th=[ 3163], 50.00th=[ 3195], 60.00th=[ 3228],
| 70.00th=[ 3294], 80.00th=[ 3392], 90.00th=[ 3621], 95.00th=[ 3720],
| 99.00th=[ 5800], 99.50th=[ 6194], 99.90th=[ 6652], 99.95th=[ 7767],
| 99.99th=[26870]
write: IOPS=3772, BW=14.7MiB/s (15.5MB/s)(500MiB/33931msec); 0 zone resets
slat (usec): min=9, max=834, avg=23.67, stdev= 9.04
clat (usec): min=792, max=36997, avg=4216.23, stdev=1121.55
lat (usec): min=816, max=37019, avg=4240.08, stdev=1122.77
clat percentiles (usec):
| 1.00th=[ 2245], 5.00th=[ 2507], 10.00th=[ 2704], 20.00th=[ 3294],
| 30.00th=[ 3818], 40.00th=[ 4146], 50.00th=[ 4359], 60.00th=[ 4490],
| 70.00th=[ 4686], 80.00th=[ 4883], 90.00th=[ 5211], 95.00th=[ 5538],
| 99.00th=[ 7308], 99.50th=[ 7832], 99.90th=[10814], 99.95th=[16712],
| 99.99th=[35914]
bw ( KiB/s): min=11872, max=19072, per=99.79%, avg=15058.82, stdev=1497.26, samples=68
iops : min= 2968, max= 4768, avg=3764.71, stdev=374.32, samples=68
lat (usec) : 500=0.01%, 750=0.01%, 1000=0.01%
lat (msec) : 2=0.07%, 4=59.15%, 10=40.69%, 20=0.05%, 50=0.03%
cpu : usr=2.41%, sys=9.31%, ctx=201072, majf=0, minf=1913
IO depths : 1=0.1%, 2=0.1%, 4=0.1%, 8=0.1%, 16=100.0%, 32=0.0%, >=64=0.0%
submit : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0%
complete : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.1%, 32=0.0%, 64=0.0%, >=64=0.0%
issued rwts: total=80975,128000,0,0 short=0,0,0,0 dropped=0,0,0,0
latency : target=0, window=0, percentile=100.00%, depth=16
Run status group 0 (all jobs):
READ: bw=19.8MiB/s (20.8MB/s), 19.8MiB/s-19.8MiB/s (20.8MB/s-20.8MB/s), io=316MiB (332MB), run=15950-15950msec
WRITE: bw=14.7MiB/s (15.5MB/s), 14.7MiB/s-14.7MiB/s (15.5MB/s-15.5MB/s), io=500MiB (524MB), run=33931-33931msec
Disk stats (read/write):
loop2: ios=80860/128089, merge=0/1, ticks=253666/534697, in_queue=788405, util=99.89%
+ for i in `shuf -i 1-$NN -n $NN`
+ fallocate -o 0 -l 524288000 /mnt/loop1/testfile
+ fio fio/verify.fio --filename=/mnt/loop1/testfile
write-and-verify: (g=0): rw=randwrite, bs=(R) 4096B-4096B, (W) 4096B-4096B, (T) 4096B-4096B, ioengine=libaio, iodepth=16
fio-3.27
Starting 1 process
Jobs: 1 (f=1): [V(1)][80.3%][r=20.7MiB/s][r=5293 IOPS][eta 00m:12s]
write-and-verify: (groupid=0, jobs=1): err= 0: pid=3892: Wed Sep 22 18:39:56 2021
read: IOPS=5029, BW=19.6MiB/s (20.6MB/s)(316MiB/16068msec)
slat (usec): min=7, max=172, avg= 9.35, stdev= 4.87
clat (usec): min=289, max=38314, avg=3170.00, stdev=708.79
lat (usec): min=334, max=38322, avg=3179.43, stdev=708.76
clat percentiles (usec):
| 1.00th=[ 2311], 5.00th=[ 2343], 10.00th=[ 2376], 20.00th=[ 2802],
| 30.00th=[ 3097], 40.00th=[ 3195], 50.00th=[ 3195], 60.00th=[ 3228],
| 70.00th=[ 3294], 80.00th=[ 3425], 90.00th=[ 3654], 95.00th=[ 3752],
| 99.00th=[ 5735], 99.50th=[ 6063], 99.90th=[ 6521], 99.95th=[ 7111],
| 99.99th=[37487]
write: IOPS=3790, BW=14.8MiB/s (15.5MB/s)(500MiB/33766msec); 0 zone resets
slat (usec): min=8, max=568, avg=23.76, stdev= 8.75
clat (usec): min=453, max=54336, avg=4195.51, stdev=1219.36
lat (usec): min=525, max=54366, avg=4219.45, stdev=1220.49
clat percentiles (usec):
| 1.00th=[ 2245], 5.00th=[ 2442], 10.00th=[ 2638], 20.00th=[ 3294],
| 30.00th=[ 3818], 40.00th=[ 4113], 50.00th=[ 4359], 60.00th=[ 4490],
| 70.00th=[ 4686], 80.00th=[ 4883], 90.00th=[ 5145], 95.00th=[ 5473],
| 99.00th=[ 7308], 99.50th=[ 7767], 99.90th=[ 8979], 99.95th=[12387],
| 99.99th=[52167]
bw ( KiB/s): min= 6872, max=19560, per=99.31%, avg=15058.32, stdev=1738.01, samples=68
iops : min= 1718, max= 4890, avg=3764.57, stdev=434.49, samples=68
lat (usec) : 500=0.01%, 750=0.01%, 1000=0.01%
lat (msec) : 2=0.08%, 4=59.34%, 10=40.52%, 20=0.03%, 50=0.02%
lat (msec) : 100=0.01%
cpu : usr=2.43%, sys=9.46%, ctx=201149, majf=0, minf=1909
IO depths : 1=0.1%, 2=0.1%, 4=0.1%, 8=0.1%, 16=100.0%, 32=0.0%, >=64=0.0%
submit : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0%
complete : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.1%, 32=0.0%, 64=0.0%, >=64=0.0%
issued rwts: total=80817,128000,0,0 short=0,0,0,0 dropped=0,0,0,0
latency : target=0, window=0, percentile=100.00%, depth=16
Run status group 0 (all jobs):
READ: bw=19.6MiB/s (20.6MB/s), 19.6MiB/s-19.6MiB/s (20.6MB/s-20.6MB/s), io=316MiB (331MB), run=16068-16068msec
WRITE: bw=14.8MiB/s (15.5MB/s), 14.8MiB/s-14.8MiB/s (15.5MB/s-15.5MB/s), io=500MiB (524MB), run=33766-33766msec
Disk stats (read/write):
loop1: ios=79895/128092, merge=0/1, ticks=252918/532368, in_queue=785393, util=99.89%
+ for i in `shuf -i 1-$NN -n $NN`
+ fallocate -o 0 -l 524288000 /mnt/loop3/testfile
+ fio fio/verify.fio --filename=/mnt/loop3/testfile
write-and-verify: (g=0): rw=randwrite, bs=(R) 4096B-4096B, (W) 4096B-4096B, (T) 4096B-4096B, ioengine=libaio, iodepth=16
fio-3.27
Starting 1 process
Jobs: 1 (f=1): [V(1)][80.6%][r=19.8MiB/s][r=5081 IOPS][eta 00m:12s]
write-and-verify: (groupid=0, jobs=1): err= 0: pid=3952: Wed Sep 22 18:40:47 2021
read: IOPS=4964, BW=19.4MiB/s (20.3MB/s)(316MiB/16314msec)
slat (usec): min=7, max=490, avg= 9.28, stdev= 5.91
clat (usec): min=247, max=27179, avg=3211.98, stdev=603.98
lat (usec): min=294, max=27187, avg=3221.35, stdev=603.90
clat percentiles (usec):
| 1.00th=[ 2245], 5.00th=[ 2343], 10.00th=[ 2442], 20.00th=[ 2900],
| 30.00th=[ 3163], 40.00th=[ 3195], 50.00th=[ 3195], 60.00th=[ 3261],
| 70.00th=[ 3326], 80.00th=[ 3490], 90.00th=[ 3621], 95.00th=[ 3752],
| 99.00th=[ 5800], 99.50th=[ 6128], 99.90th=[ 6980], 99.95th=[ 8291],
| 99.99th=[24511]
write: IOPS=3723, BW=14.5MiB/s (15.2MB/s)(500MiB/34380msec); 0 zone resets
slat (usec): min=8, max=454, avg=22.60, stdev= 9.96
clat (usec): min=391, max=79334, avg=4273.40, stdev=1574.27
lat (usec): min=435, max=79367, avg=4296.17, stdev=1574.81
clat percentiles (usec):
| 1.00th=[ 2114], 5.00th=[ 2507], 10.00th=[ 2671], 20.00th=[ 3523],
| 30.00th=[ 3982], 40.00th=[ 4228], 50.00th=[ 4359], 60.00th=[ 4555],
| 70.00th=[ 4752], 80.00th=[ 4948], 90.00th=[ 5211], 95.00th=[ 5473],
| 99.00th=[ 7373], 99.50th=[ 7898], 99.90th=[13304], 99.95th=[25822],
| 99.99th=[78119]
bw ( KiB/s): min=10960, max=19384, per=99.65%, avg=14840.58, stdev=1483.91, samples=69
iops : min= 2740, max= 4846, avg=3710.14, stdev=370.98, samples=69
lat (usec) : 250=0.01%, 500=0.01%, 750=0.01%, 1000=0.02%
lat (msec) : 2=0.49%, 4=56.11%, 10=43.27%, 20=0.07%, 50=0.03%
lat (msec) : 100=0.02%
cpu : usr=2.44%, sys=8.74%, ctx=201212, majf=0, minf=1915
IO depths : 1=0.1%, 2=0.1%, 4=0.1%, 8=0.1%, 16=100.0%, 32=0.0%, >=64=0.0%
submit : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0%
complete : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.1%, 32=0.0%, 64=0.0%, >=64=0.0%
issued rwts: total=80986,128000,0,0 short=0,0,0,0 dropped=0,0,0,0
latency : target=0, window=0, percentile=100.00%, depth=16
Run status group 0 (all jobs):
READ: bw=19.4MiB/s (20.3MB/s), 19.4MiB/s-19.4MiB/s (20.3MB/s-20.3MB/s), io=316MiB (332MB), run=16314-16314msec
WRITE: bw=14.5MiB/s (15.2MB/s), 14.5MiB/s-14.5MiB/s (15.2MB/s-15.2MB/s), io=500MiB (524MB), run=34380-34380msec
Disk stats (read/write):
loop3: ios=80354/128095, merge=0/1, ticks=257764/542042, in_queue=799968, util=99.90%
+ for i in `shuf -i 1-$NN -n $NN`
+ fallocate -o 0 -l 524288000 /mnt/loop8/testfile
+ fio fio/verify.fio --filename=/mnt/loop8/testfile
write-and-verify: (g=0): rw=randwrite, bs=(R) 4096B-4096B, (W) 4096B-4096B, (T) 4096B-4096B, ioengine=libaio, iodepth=16
fio-3.27
Starting 1 process
Jobs: 1 (f=1): [V(1)][81.8%][r=20.0MiB/s][r=5125 IOPS][eta 00m:12s]
write-and-verify: (groupid=0, jobs=1): err= 0: pid=4059: Wed Sep 22 18:41:41 2021
read: IOPS=4982, BW=19.5MiB/s (20.4MB/s)(316MiB/16256msec)
slat (usec): min=7, max=218, avg= 9.07, stdev= 4.02
clat (usec): min=311, max=13537, avg=3200.12, stdev=578.34
lat (usec): min=359, max=13545, avg=3209.29, stdev=578.63
clat percentiles (usec):
| 1.00th=[ 2245], 5.00th=[ 2343], 10.00th=[ 2376], 20.00th=[ 2835],
| 30.00th=[ 3130], 40.00th=[ 3195], 50.00th=[ 3228], 60.00th=[ 3261],
| 70.00th=[ 3326], 80.00th=[ 3490], 90.00th=[ 3654], 95.00th=[ 3785],
| 99.00th=[ 5866], 99.50th=[ 6259], 99.90th=[ 8029], 99.95th=[ 9765],
| 99.99th=[11994]
write: IOPS=3480, BW=13.6MiB/s (14.3MB/s)(500MiB/36776msec); 0 zone resets
slat (usec): min=8, max=528, avg=23.67, stdev= 9.33
clat (usec): min=829, max=149982, avg=4571.88, stdev=2285.49
lat (usec): min=860, max=150005, avg=4595.73, stdev=2286.11
clat percentiles (msec):
| 1.00th=[ 3], 5.00th=[ 3], 10.00th=[ 3], 20.00th=[ 4],
| 30.00th=[ 4], 40.00th=[ 5], 50.00th=[ 5], 60.00th=[ 5],
| 70.00th=[ 5], 80.00th=[ 6], 90.00th=[ 7], 95.00th=[ 7],
| 99.00th=[ 9], 99.50th=[ 10], 99.90th=[ 28], 99.95th=[ 54],
| 99.99th=[ 111]
bw ( KiB/s): min= 5128, max=19008, per=99.39%, avg=13837.38, stdev=2737.15, samples=74
iops : min= 1282, max= 4752, avg=3459.34, stdev=684.28, samples=74
lat (usec) : 500=0.01%, 750=0.01%, 1000=0.01%
lat (msec) : 2=0.07%, 4=56.69%, 10=43.04%, 20=0.13%, 50=0.04%
lat (msec) : 100=0.03%, 250=0.01%
cpu : usr=2.51%, sys=8.56%, ctx=201922, majf=0, minf=1915
IO depths : 1=0.1%, 2=0.1%, 4=0.1%, 8=0.1%, 16=100.0%, 32=0.0%, >=64=0.0%
submit : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0%
complete : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.1%, 32=0.0%, 64=0.0%, >=64=0.0%
issued rwts: total=81002,128000,0,0 short=0,0,0,0 dropped=0,0,0,0
latency : target=0, window=0, percentile=100.00%, depth=16
Run status group 0 (all jobs):
READ: bw=19.5MiB/s (20.4MB/s), 19.5MiB/s-19.5MiB/s (20.4MB/s-20.4MB/s), io=316MiB (332MB), run=16256-16256msec
WRITE: bw=13.6MiB/s (14.3MB/s), 13.6MiB/s-13.6MiB/s (14.3MB/s-14.3MB/s), io=500MiB (524MB), run=36776-36776msec
Disk stats (read/write):
loop8: ios=80192/128086, merge=0/1, ticks=256554/580337, in_queue=836984, util=99.90%
+ for i in `shuf -i 1-$NN -n $NN`
+ fallocate -o 0 -l 524288000 /mnt/loop9/testfile
+ fio fio/verify.fio --filename=/mnt/loop9/testfile
write-and-verify: (g=0): rw=randwrite, bs=(R) 4096B-4096B, (W) 4096B-4096B, (T) 4096B-4096B, ioengine=libaio, iodepth=16
fio-3.27
Starting 1 process
Jobs: 1 (f=1): [V(1)][81.9%][r=18.8MiB/s][r=4801 IOPS][eta 00m:15s]
write-and-verify: (groupid=0, jobs=1): err= 0: pid=4079: Wed Sep 22 18:42:49 2021
read: IOPS=4999, BW=19.5MiB/s (20.5MB/s)(316MiB/16178msec)
slat (usec): min=6, max=571, avg= 9.39, stdev= 5.53
clat (usec): min=287, max=9799, avg=3189.10, stdev=505.18
lat (usec): min=314, max=9810, avg=3198.58, stdev=505.01
clat percentiles (usec):
| 1.00th=[ 2245], 5.00th=[ 2343], 10.00th=[ 2442], 20.00th=[ 2868],
| 30.00th=[ 3163], 40.00th=[ 3195], 50.00th=[ 3195], 60.00th=[ 3228],
| 70.00th=[ 3294], 80.00th=[ 3458], 90.00th=[ 3621], 95.00th=[ 3720],
| 99.00th=[ 5604], 99.50th=[ 6063], 99.90th=[ 6783], 99.95th=[ 7504],
| 99.99th=[ 9503]
write: IOPS=2470, BW=9881KiB/s (10.1MB/s)(500MiB/51818msec); 0 zone resets
slat (usec): min=9, max=662, avg=26.55, stdev= 9.28
clat (usec): min=927, max=64814, avg=6449.01, stdev=1895.80
lat (usec): min=991, max=64839, avg=6475.75, stdev=1896.34
clat percentiles (usec):
| 1.00th=[ 3097], 5.00th=[ 4047], 10.00th=[ 4555], 20.00th=[ 5014],
| 30.00th=[ 5342], 40.00th=[ 5735], 50.00th=[ 6128], 60.00th=[ 6652],
| 70.00th=[ 7242], 80.00th=[ 7963], 90.00th=[ 8848], 95.00th=[ 9503],
| 99.00th=[10683], 99.50th=[11600], 99.90th=[13829], 99.95th=[20841],
| 99.99th=[63177]
bw ( KiB/s): min= 6784, max=15336, per=99.64%, avg=9845.94, stdev=1867.84, samples=104
iops : min= 1696, max= 3834, avg=2461.48, stdev=466.96, samples=104
lat (usec) : 500=0.01%, 750=0.01%, 1000=0.01%
lat (msec) : 2=0.01%, 4=40.87%, 10=57.87%, 20=1.22%, 50=0.02%
lat (msec) : 100=0.01%
cpu : usr=1.93%, sys=7.41%, ctx=201842, majf=0, minf=1912
IO depths : 1=0.1%, 2=0.1%, 4=0.1%, 8=0.1%, 16=100.0%, 32=0.0%, >=64=0.0%
submit : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0%
complete : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.1%, 32=0.0%, 64=0.0%, >=64=0.0%
issued rwts: total=80883,128000,0,0 short=0,0,0,0 dropped=0,0,0,0
latency : target=0, window=0, percentile=100.00%, depth=16
Run status group 0 (all jobs):
READ: bw=19.5MiB/s (20.5MB/s), 19.5MiB/s-19.5MiB/s (20.5MB/s-20.5MB/s), io=316MiB (331MB), run=16178-16178msec
WRITE: bw=9881KiB/s (10.1MB/s), 9881KiB/s-9881KiB/s (10.1MB/s-10.1MB/s), io=500MiB (524MB), run=51818-51818msec
Disk stats (read/write):
loop9: ios=80146/128091, merge=0/1, ticks=255250/820483, in_queue=1075849, util=99.94%
+ df -h /mnt/loop1 /mnt/loop10 /mnt/loop2 /mnt/loop3 /mnt/loop4 /mnt/loop5 /mnt/loop6 /mnt/loop7 /mnt/loop8 /mnt/loop9
Filesystem Size Used Avail Use% Mounted on
/dev/loop1 2.0G 548M 1.5G 27% /mnt/loop1
/dev/loop10 2.0G 548M 1.5G 27% /mnt/loop10
/dev/loop2 2.0G 548M 1.5G 27% /mnt/loop2
/dev/loop3 2.0G 548M 1.5G 27% /mnt/loop3
/dev/loop4 2.0G 548M 1.5G 27% /mnt/loop4
/dev/loop5 2.0G 548M 1.5G 27% /mnt/loop5
/dev/loop6 2.0G 548M 1.5G 27% /mnt/loop6
/dev/loop7 2.0G 548M 1.5G 27% /mnt/loop7
/dev/loop8 2.0G 548M 1.5G 27% /mnt/loop8
/dev/loop9 2.0G 548M 1.5G 27% /mnt/loop9
+ unload_loop
++ shuf -i 1-10 -n 10
+ for i in `shuf -i 1-$NN -n $NN`
+ umount /mnt/loop7
+ rm -fr ./loop7
+ for i in `shuf -i 1-$NN -n $NN`
+ umount /mnt/loop8
+ rm -fr ./loop8
+ for i in `shuf -i 1-$NN -n $NN`
+ umount /mnt/loop4
+ rm -fr ./loop4
+ for i in `shuf -i 1-$NN -n $NN`
+ umount /mnt/loop10
+ rm -fr ./loop10
+ for i in `shuf -i 1-$NN -n $NN`
+ umount /mnt/loop3
+ rm -fr ./loop3
+ for i in `shuf -i 1-$NN -n $NN`
+ umount /mnt/loop9
+ rm -fr ./loop9
+ for i in `shuf -i 1-$NN -n $NN`
+ umount /mnt/loop1
+ rm -fr ./loop1
+ for i in `shuf -i 1-$NN -n $NN`
+ umount /mnt/loop2
+ rm -fr ./loop2
+ for i in `shuf -i 1-$NN -n $NN`
+ umount /mnt/loop5
+ rm -fr ./loop5
+ for i in `shuf -i 1-$NN -n $NN`
+ umount /mnt/loop6
+ rm -fr ./loop6
+ losetup -D
+ sleep 3
+ rmmod loop
+ modprobe -r loop
+ lsmod
+ grep loop
++ shuf -i 1-10 -n 10
+ for i in `shuf -i 1-$NN -n $NN`
+ rm -fr ./loop2
+ for i in `shuf -i 1-$NN -n $NN`
+ rm -fr ./loop6
+ for i in `shuf -i 1-$NN -n $NN`
+ rm -fr ./loop10
+ for i in `shuf -i 1-$NN -n $NN`
+ rm -fr ./loop7
+ for i in `shuf -i 1-$NN -n $NN`
+ rm -fr ./loop4
+ for i in `shuf -i 1-$NN -n $NN`
+ rm -fr ./loop9
+ for i in `shuf -i 1-$NN -n $NN`
+ rm -fr ./loop8
+ for i in `shuf -i 1-$NN -n $NN`
+ rm -fr ./loop1
+ for i in `shuf -i 1-$NN -n $NN`
+ rm -fr ./loop5
+ for i in `shuf -i 1-$NN -n $NN`
+ rm -fr ./loop3
--
2.29.0
^ permalink raw reply [flat|nested] 9+ messages in thread* [PATCH V2 1/8] loop: use sysfs_emit() in the sysfs offset show
2021-09-23 1:49 [PATCH V2 0/8] loop: small clenaup Chaitanya Kulkarni
@ 2021-09-23 1:49 ` Chaitanya Kulkarni
2021-09-23 1:49 ` [PATCH V2 2/8] loop: use sysfs_emit() in the sysfs sizelimit show Chaitanya Kulkarni
` (6 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Chaitanya Kulkarni @ 2021-09-23 1:49 UTC (permalink / raw)
To: linux-block; +Cc: Chaitanya Kulkarni, Himanshu Madhani
From: Chaitanya Kulkarni <kch@nvidia.com>
sprintf does not know the PAGE_SIZE maximum of the temporary buffer
used for outputting sysfs content and it's possible to overrun the
PAGE_SIZE buffer length.
Use a generic sysfs_emit function that knows the size of the
temporary buffer and ensures that no overrun is done for offset
attribute.
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
---
drivers/block/loop.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index 7bf4686af774..e37444977ae6 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -856,7 +856,7 @@ static ssize_t loop_attr_backing_file_show(struct loop_device *lo, char *buf)
static ssize_t loop_attr_offset_show(struct loop_device *lo, char *buf)
{
- return sprintf(buf, "%llu\n", (unsigned long long)lo->lo_offset);
+ return sysfs_emit(buf, "%llu\n", (unsigned long long)lo->lo_offset);
}
static ssize_t loop_attr_sizelimit_show(struct loop_device *lo, char *buf)
--
2.29.0
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH V2 2/8] loop: use sysfs_emit() in the sysfs sizelimit show
2021-09-23 1:49 [PATCH V2 0/8] loop: small clenaup Chaitanya Kulkarni
2021-09-23 1:49 ` [PATCH V2 1/8] loop: use sysfs_emit() in the sysfs offset show Chaitanya Kulkarni
@ 2021-09-23 1:49 ` Chaitanya Kulkarni
2021-09-23 1:49 ` [PATCH V2 3/8] loop: use sysfs_emit() in the sysfs autoclear show Chaitanya Kulkarni
` (5 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Chaitanya Kulkarni @ 2021-09-23 1:49 UTC (permalink / raw)
To: linux-block; +Cc: Chaitanya Kulkarni, Himanshu Madhani
From: Chaitanya Kulkarni <kch@nvidia.com>
sprintf does not know the PAGE_SIZE maximum of the temporary buffer
used for outputting sysfs content and it's possible to overrun the
PAGE_SIZE buffer length.
Use a generic sysfs_emit function that knows the size of the
temporary buffer and ensures that no overrun is done for offset
attribute.
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
---
drivers/block/loop.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index e37444977ae6..ec1329afc154 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -861,7 +861,7 @@ static ssize_t loop_attr_offset_show(struct loop_device *lo, char *buf)
static ssize_t loop_attr_sizelimit_show(struct loop_device *lo, char *buf)
{
- return sprintf(buf, "%llu\n", (unsigned long long)lo->lo_sizelimit);
+ return sysfs_emit(buf, "%llu\n", (unsigned long long)lo->lo_sizelimit);
}
static ssize_t loop_attr_autoclear_show(struct loop_device *lo, char *buf)
--
2.29.0
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH V2 3/8] loop: use sysfs_emit() in the sysfs autoclear show
2021-09-23 1:49 [PATCH V2 0/8] loop: small clenaup Chaitanya Kulkarni
2021-09-23 1:49 ` [PATCH V2 1/8] loop: use sysfs_emit() in the sysfs offset show Chaitanya Kulkarni
2021-09-23 1:49 ` [PATCH V2 2/8] loop: use sysfs_emit() in the sysfs sizelimit show Chaitanya Kulkarni
@ 2021-09-23 1:49 ` Chaitanya Kulkarni
2021-09-23 1:49 ` [PATCH V2 4/8] loop: use sysfs_emit() in the sysfs partscan show Chaitanya Kulkarni
` (4 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Chaitanya Kulkarni @ 2021-09-23 1:49 UTC (permalink / raw)
To: linux-block; +Cc: Chaitanya Kulkarni, Himanshu Madhani
From: Chaitanya Kulkarni <kch@nvidia.com>
sprintf does not know the PAGE_SIZE maximum of the temporary buffer
used for outputting sysfs content and it's possible to overrun the
PAGE_SIZE buffer length.
Use a generic sysfs_emit function that knows the size of the
temporary buffer and ensures that no overrun is done for offset
attribute.
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
---
drivers/block/loop.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index ec1329afc154..fd935b788c53 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -868,7 +868,7 @@ static ssize_t loop_attr_autoclear_show(struct loop_device *lo, char *buf)
{
int autoclear = (lo->lo_flags & LO_FLAGS_AUTOCLEAR);
- return sprintf(buf, "%s\n", autoclear ? "1" : "0");
+ return sysfs_emit(buf, "%s\n", autoclear ? "1" : "0");
}
static ssize_t loop_attr_partscan_show(struct loop_device *lo, char *buf)
--
2.29.0
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH V2 4/8] loop: use sysfs_emit() in the sysfs partscan show
2021-09-23 1:49 [PATCH V2 0/8] loop: small clenaup Chaitanya Kulkarni
` (2 preceding siblings ...)
2021-09-23 1:49 ` [PATCH V2 3/8] loop: use sysfs_emit() in the sysfs autoclear show Chaitanya Kulkarni
@ 2021-09-23 1:49 ` Chaitanya Kulkarni
2021-09-23 1:49 ` [PATCH V2 5/8] loop: use sysfs_emit() in the sysfs dio show Chaitanya Kulkarni
` (3 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Chaitanya Kulkarni @ 2021-09-23 1:49 UTC (permalink / raw)
To: linux-block; +Cc: Chaitanya Kulkarni, Himanshu Madhani
From: Chaitanya Kulkarni <kch@nvidia.com>
sprintf does not know the PAGE_SIZE maximum of the temporary buffer
used for outputting sysfs content and it's possible to overrun the
PAGE_SIZE buffer length.
Use a generic sysfs_emit function that knows the size of the
temporary buffer and ensures that no overrun is done for offset
attribute.
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
---
drivers/block/loop.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index fd935b788c53..63f64341c19c 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -875,7 +875,7 @@ static ssize_t loop_attr_partscan_show(struct loop_device *lo, char *buf)
{
int partscan = (lo->lo_flags & LO_FLAGS_PARTSCAN);
- return sprintf(buf, "%s\n", partscan ? "1" : "0");
+ return sysfs_emit(buf, "%s\n", partscan ? "1" : "0");
}
static ssize_t loop_attr_dio_show(struct loop_device *lo, char *buf)
--
2.29.0
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH V2 5/8] loop: use sysfs_emit() in the sysfs dio show
2021-09-23 1:49 [PATCH V2 0/8] loop: small clenaup Chaitanya Kulkarni
` (3 preceding siblings ...)
2021-09-23 1:49 ` [PATCH V2 4/8] loop: use sysfs_emit() in the sysfs partscan show Chaitanya Kulkarni
@ 2021-09-23 1:49 ` Chaitanya Kulkarni
2021-09-23 1:49 ` [PATCH V2 6/8] loop: remove extra variable in lo_fallocate() Chaitanya Kulkarni
` (2 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Chaitanya Kulkarni @ 2021-09-23 1:49 UTC (permalink / raw)
To: linux-block; +Cc: Chaitanya Kulkarni, Himanshu Madhani
From: Chaitanya Kulkarni <kch@nvidia.com>
sprintf does not know the PAGE_SIZE maximum of the temporary buffer
used for outputting sysfs content and it's possible to overrun the
PAGE_SIZE buffer length.
Use a generic sysfs_emit function that knows the size of the
temporary buffer and ensures that no overrun is done for offset
attribute.
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
---
drivers/block/loop.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index 63f64341c19c..fedb8d63b4c6 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -882,7 +882,7 @@ static ssize_t loop_attr_dio_show(struct loop_device *lo, char *buf)
{
int dio = (lo->lo_flags & LO_FLAGS_DIRECT_IO);
- return sprintf(buf, "%s\n", dio ? "1" : "0");
+ return sysfs_emit(buf, "%s\n", dio ? "1" : "0");
}
LOOP_ATTR_RO(backing_file);
--
2.29.0
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH V2 6/8] loop: remove extra variable in lo_fallocate()
2021-09-23 1:49 [PATCH V2 0/8] loop: small clenaup Chaitanya Kulkarni
` (4 preceding siblings ...)
2021-09-23 1:49 ` [PATCH V2 5/8] loop: use sysfs_emit() in the sysfs dio show Chaitanya Kulkarni
@ 2021-09-23 1:49 ` Chaitanya Kulkarni
2021-09-23 1:49 ` [PATCH V2 7/8] loop: remove extra variable in lo_req_flush Chaitanya Kulkarni
2021-09-23 1:49 ` [PATCH V2 8/8] loop: allow user to set the queue depth Chaitanya Kulkarni
7 siblings, 0 replies; 9+ messages in thread
From: Chaitanya Kulkarni @ 2021-09-23 1:49 UTC (permalink / raw)
To: linux-block; +Cc: Chaitanya Kulkarni, Himanshu Madhani
From: Chaitanya Kulkarni <kch@nvidia.com>
The local variable q is used to pass it to the blk_queue_discard(). We
can get away with using lo->lo_queue instead of storing in a local
variable which is not used anywhere else.
No functional change in this patch.
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
---
drivers/block/loop.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index fedb8d63b4c6..51c42788731a 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -480,12 +480,11 @@ static int lo_fallocate(struct loop_device *lo, struct request *rq, loff_t pos,
* information.
*/
struct file *file = lo->lo_backing_file;
- struct request_queue *q = lo->lo_queue;
int ret;
mode |= FALLOC_FL_KEEP_SIZE;
- if (!blk_queue_discard(q)) {
+ if (!blk_queue_discard(lo->lo_queue)) {
ret = -EOPNOTSUPP;
goto out;
}
--
2.29.0
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH V2 7/8] loop: remove extra variable in lo_req_flush
2021-09-23 1:49 [PATCH V2 0/8] loop: small clenaup Chaitanya Kulkarni
` (5 preceding siblings ...)
2021-09-23 1:49 ` [PATCH V2 6/8] loop: remove extra variable in lo_fallocate() Chaitanya Kulkarni
@ 2021-09-23 1:49 ` Chaitanya Kulkarni
2021-09-23 1:49 ` [PATCH V2 8/8] loop: allow user to set the queue depth Chaitanya Kulkarni
7 siblings, 0 replies; 9+ messages in thread
From: Chaitanya Kulkarni @ 2021-09-23 1:49 UTC (permalink / raw)
To: linux-block; +Cc: Chaitanya Kulkarni, Himanshu Madhani
From: Chaitanya Kulkarni <kch@nvidia.com>
The local variable file is used to pass it to the vfs_fsync(). We can
get away with using lo->lo_backing_file instead of storing in a local
variable which is not used anywhere else.
No functional change in this patch.
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
---
drivers/block/loop.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index 51c42788731a..6478d3b0dd2a 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -498,8 +498,7 @@ static int lo_fallocate(struct loop_device *lo, struct request *rq, loff_t pos,
static int lo_req_flush(struct loop_device *lo, struct request *rq)
{
- struct file *file = lo->lo_backing_file;
- int ret = vfs_fsync(file, 0);
+ int ret = vfs_fsync(lo->lo_backing_file, 0);
if (unlikely(ret && ret != -EINVAL))
ret = -EIO;
--
2.29.0
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH V2 8/8] loop: allow user to set the queue depth
2021-09-23 1:49 [PATCH V2 0/8] loop: small clenaup Chaitanya Kulkarni
` (6 preceding siblings ...)
2021-09-23 1:49 ` [PATCH V2 7/8] loop: remove extra variable in lo_req_flush Chaitanya Kulkarni
@ 2021-09-23 1:49 ` Chaitanya Kulkarni
7 siblings, 0 replies; 9+ messages in thread
From: Chaitanya Kulkarni @ 2021-09-23 1:49 UTC (permalink / raw)
To: linux-block; +Cc: Chaitanya Kulkarni, Himanshu Madhani
From: Chaitanya Kulkarni <kch@nvidia.com>
Instead of hardcoding queue depth allow user to set the hw queue depth
using module parameter. Set default value to 128 to retain the existing
behavior.
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
---
drivers/block/loop.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index 6478d3b0dd2a..aeba72b5dd2d 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -2096,6 +2096,9 @@ module_param(max_loop, int, 0444);
MODULE_PARM_DESC(max_loop, "Maximum number of loop devices");
module_param(max_part, int, 0444);
MODULE_PARM_DESC(max_part, "Maximum number of partitions per loop device");
+static int hw_queue_depth = 128;
+module_param_named(hw_queue_depth, hw_queue_depth, int, 0444);
+MODULE_PARM_DESC(hw_queue_depth, "Queue depth for each hardware queue. Default: 128");
MODULE_LICENSE("GPL");
MODULE_ALIAS_BLOCKDEV_MAJOR(LOOP_MAJOR);
@@ -2328,7 +2331,7 @@ static int loop_add(int i)
err = -ENOMEM;
lo->tag_set.ops = &loop_mq_ops;
lo->tag_set.nr_hw_queues = 1;
- lo->tag_set.queue_depth = 128;
+ lo->tag_set.queue_depth = hw_queue_depth;
lo->tag_set.numa_node = NUMA_NO_NODE;
lo->tag_set.cmd_size = sizeof(struct loop_cmd);
lo->tag_set.flags = BLK_MQ_F_SHOULD_MERGE | BLK_MQ_F_STACKING |
--
2.29.0
^ permalink raw reply related [flat|nested] 9+ messages in thread
end of thread, other threads:[~2021-09-23 1:51 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-09-23 1:49 [PATCH V2 0/8] loop: small clenaup Chaitanya Kulkarni
2021-09-23 1:49 ` [PATCH V2 1/8] loop: use sysfs_emit() in the sysfs offset show Chaitanya Kulkarni
2021-09-23 1:49 ` [PATCH V2 2/8] loop: use sysfs_emit() in the sysfs sizelimit show Chaitanya Kulkarni
2021-09-23 1:49 ` [PATCH V2 3/8] loop: use sysfs_emit() in the sysfs autoclear show Chaitanya Kulkarni
2021-09-23 1:49 ` [PATCH V2 4/8] loop: use sysfs_emit() in the sysfs partscan show Chaitanya Kulkarni
2021-09-23 1:49 ` [PATCH V2 5/8] loop: use sysfs_emit() in the sysfs dio show Chaitanya Kulkarni
2021-09-23 1:49 ` [PATCH V2 6/8] loop: remove extra variable in lo_fallocate() Chaitanya Kulkarni
2021-09-23 1:49 ` [PATCH V2 7/8] loop: remove extra variable in lo_req_flush Chaitanya Kulkarni
2021-09-23 1:49 ` [PATCH V2 8/8] loop: allow user to set the queue depth Chaitanya Kulkarni
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).