linux-block.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: NeilBrown <neilb@suse.com>
To: Jens Axboe <axboe@fb.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: linux-block@vger.kernel.org, linux-mm@kvack.org,
	LKML <linux-kernel@vger.kernel.org>,
	Ming Lei <tom.leiming@gmail.com>
Subject: [PATCH v3] loop: Add PF_LESS_THROTTLE to block/loop device thread.
Date: Fri, 07 Apr 2017 09:47:32 +1000	[thread overview]
Message-ID: <87o9w9yu7f.fsf@notabene.neil.brown.name> (raw)
In-Reply-To: <20170406065326.GB5497@dhcp22.suse.cz>

[-- Attachment #1: Type: text/plain, Size: 2574 bytes --]


When a filesystem is mounted from a loop device, writes are
throttled by balance_dirty_pages() twice: once when writing
to the filesystem and once when the loop_handle_cmd() writes
to the backing file.  This double-throttling can trigger
positive feedback loops that create significant delays.  The
throttling at the lower level is seen by the upper level as
a slow device, so it throttles extra hard.

The PF_LESS_THROTTLE flag was created to handle exactly this
circumstance, though with an NFS filesystem mounted from a
local NFS server.  It reduces the throttling on the lower
layer so that it can proceed largely unthrottled.

To demonstrate this, create a filesystem on a loop device
and write (e.g. with dd) several large files which combine
to consume significantly more than the limit set by
/proc/sys/vm/dirty_ratio or dirty_bytes.  Measure the total
time taken.

When I do this directly on a device (no loop device) the
total time for several runs (mkfs, mount, write 200 files,
umount) is fairly stable: 28-35 seconds.
When I do this over a loop device the times are much worse
and less stable.  52-460 seconds.  Half below 100seconds,
half above.
When I apply this patch, the times become stable again,
though not as fast as the no-loop-back case: 53-72 seconds.

There may be room for further improvement as the total overhead still
seems too high, but this is a big improvement.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <tom.leiming@gmail.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: NeilBrown <neilb@suse.com>
---

Hi Jens,
 I think this version meets with everyone's approval.

Thanks,
NeilBrown


 drivers/block/loop.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index 0ecb6461ed81..035b8651b8bf 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -844,10 +844,16 @@ static void loop_unprepare_queue(struct loop_device *lo)
 	kthread_stop(lo->worker_task);
 }
 
+static int loop_kthread_worker_fn(void *worker_ptr)
+{
+	current->flags |= PF_LESS_THROTTLE;
+	return kthread_worker_fn(worker_ptr);
+}
+
 static int loop_prepare_queue(struct loop_device *lo)
 {
 	kthread_init_worker(&lo->worker);
-	lo->worker_task = kthread_run(kthread_worker_fn,
+	lo->worker_task = kthread_run(loop_kthread_worker_fn,
 			&lo->worker, "loop%d", lo->lo_number);
 	if (IS_ERR(lo->worker_task))
 		return -ENOMEM;
-- 
2.12.2


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 832 bytes --]

      reply	other threads:[~2017-04-06 23:48 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-04-03  1:18 [PATCH] loop: Add PF_LESS_THROTTLE to block/loop device thread NeilBrown
2017-04-04  7:10 ` Christoph Hellwig
2017-04-05  4:27   ` NeilBrown
2017-04-05  5:13     ` Ming Lei
2017-04-04 11:23 ` Michal Hocko
2017-04-04 14:24 ` Ming Lei
2017-04-05  4:31   ` NeilBrown
2017-04-05  4:33 ` [PATCH v2] " NeilBrown
2017-04-05  5:05   ` Ming Lei
2017-04-05  7:19   ` Michal Hocko
2017-04-05  7:32     ` Michal Hocko
2017-04-06  2:23       ` NeilBrown
2017-04-06  6:53         ` Michal Hocko
2017-04-06 23:47           ` NeilBrown [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87o9w9yu7f.fsf@notabene.neil.brown.name \
    --to=neilb@suse.com \
    --cc=axboe@fb.com \
    --cc=mhocko@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).