* [PATCH v1] Bluetooth: hci_qca: Enable clocks required for BT SOC
@ 2019-11-14 8:14 Balakrishna Godavarthi
2019-11-14 8:55 ` Marcel Holtmann
` (2 more replies)
0 siblings, 3 replies; 7+ messages in thread
From: Balakrishna Godavarthi @ 2019-11-14 8:14 UTC (permalink / raw)
To: marcel, johan.hedberg
Cc: mka, linux-kernel, linux-bluetooth, hemantg, linux-arm-msm,
bgodavar, tientzu, seanpaul
Instead of relying on other subsytem to turn ON clocks
required for BT SoC to operate, voting them from the driver.
Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
---
drivers/bluetooth/hci_qca.c | 31 +++++++++++++++++++++++++++++--
1 file changed, 29 insertions(+), 2 deletions(-)
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index f10bdf8e1fc5..dc95e378574b 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -164,6 +164,7 @@ struct qca_serdev {
};
static int qca_regulator_enable(struct qca_serdev *qcadev);
+static int qca_power_on(struct qca_serdev *qcadev);
static void qca_regulator_disable(struct qca_serdev *qcadev);
static void qca_power_shutdown(struct hci_uart *hu);
static int qca_power_off(struct hci_dev *hdev);
@@ -528,7 +529,7 @@ static int qca_open(struct hci_uart *hu)
} else {
hu->init_speed = qcadev->init_speed;
hu->oper_speed = qcadev->oper_speed;
- ret = qca_regulator_enable(qcadev);
+ ret = qca_power_on(qcadev);
if (ret) {
destroy_workqueue(qca->workqueue);
kfree_skb(qca->rx_skb);
@@ -1214,7 +1215,7 @@ static int qca_wcn3990_init(struct hci_uart *hu)
qcadev = serdev_device_get_drvdata(hu->serdev);
if (!qcadev->bt_power->vregs_on) {
serdev_device_close(hu->serdev);
- ret = qca_regulator_enable(qcadev);
+ ret = qca_power_on(qcadev);
if (ret)
return ret;
@@ -1408,6 +1409,9 @@ static void qca_power_shutdown(struct hci_uart *hu)
host_set_baudrate(hu, 2400);
qca_send_power_pulse(hu, false);
qca_regulator_disable(qcadev);
+
+ if (qcadev->susclk)
+ clk_disable_unprepare(qcadev->susclk);
}
static int qca_power_off(struct hci_dev *hdev)
@@ -1423,6 +1427,20 @@ static int qca_power_off(struct hci_dev *hdev)
return 0;
}
+static int qca_power_on(struct qca_serdev *qcadev)
+{
+ int err;
+
+ if (qcadev->susclk) {
+ err = clk_prepare_enable(qcadev->susclk);
+ if (err)
+ return err;
+ }
+
+ qca_regulator_enable(qcadev);
+ return 0;
+}
+
static int qca_regulator_enable(struct qca_serdev *qcadev)
{
struct qca_power *power = qcadev->bt_power;
@@ -1523,6 +1541,15 @@ static int qca_serdev_probe(struct serdev_device *serdev)
qcadev->bt_power->vregs_on = false;
+ if (qcadev->btsoc_type == QCA_WCN3990 ||
+ qcadev->btsoc_type == QCA_WCN3991) {
+ qcadev->susclk = devm_clk_get(&serdev->dev, NULL);
+ if (IS_ERR(qcadev->susclk)) {
+ dev_err(&serdev->dev, "failed to acquire clk\n");
+ return PTR_ERR(qcadev->susclk);
+ }
+ }
+
device_property_read_u32(&serdev->dev, "max-speed",
&qcadev->oper_speed);
if (!qcadev->oper_speed)
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 7+ messages in thread* Re: [PATCH v1] Bluetooth: hci_qca: Enable clocks required for BT SOC
2019-11-14 8:14 [PATCH v1] Bluetooth: hci_qca: Enable clocks required for BT SOC Balakrishna Godavarthi
@ 2019-11-14 8:55 ` Marcel Holtmann
2019-11-18 6:01 ` bgodavar
2019-11-14 17:19 ` Stephen Boyd
2019-12-12 17:43 ` Matthias Kaehlcke
2 siblings, 1 reply; 7+ messages in thread
From: Marcel Holtmann @ 2019-11-14 8:55 UTC (permalink / raw)
To: Balakrishna Godavarthi
Cc: Johan Hedberg, Matthias Kaehlcke, lkml, linux-bluetooth, hemantg,
linux-arm-msm, tientzu, seanpaul
Hi Balakrishna,
> Instead of relying on other subsytem to turn ON clocks
> required for BT SoC to operate, voting them from the driver.
>
> Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
> ---
> drivers/bluetooth/hci_qca.c | 31 +++++++++++++++++++++++++++++--
> 1 file changed, 29 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
> index f10bdf8e1fc5..dc95e378574b 100644
> --- a/drivers/bluetooth/hci_qca.c
> +++ b/drivers/bluetooth/hci_qca.c
> @@ -164,6 +164,7 @@ struct qca_serdev {
> };
>
> static int qca_regulator_enable(struct qca_serdev *qcadev);
> +static int qca_power_on(struct qca_serdev *qcadev);
I really dislike forward declaration. Only use them if they are really really needed. That said, this driver might actually need cleanups since I just realized it has tons of forward declarations.
> static void qca_regulator_disable(struct qca_serdev *qcadev);
> static void qca_power_shutdown(struct hci_uart *hu);
> static int qca_power_off(struct hci_dev *hdev);
> @@ -528,7 +529,7 @@ static int qca_open(struct hci_uart *hu)
> } else {
> hu->init_speed = qcadev->init_speed;
> hu->oper_speed = qcadev->oper_speed;
> - ret = qca_regulator_enable(qcadev);
> + ret = qca_power_on(qcadev);
> if (ret) {
> destroy_workqueue(qca->workqueue);
> kfree_skb(qca->rx_skb);
> @@ -1214,7 +1215,7 @@ static int qca_wcn3990_init(struct hci_uart *hu)
> qcadev = serdev_device_get_drvdata(hu->serdev);
> if (!qcadev->bt_power->vregs_on) {
> serdev_device_close(hu->serdev);
> - ret = qca_regulator_enable(qcadev);
> + ret = qca_power_on(qcadev);
> if (ret)
> return ret;
>
> @@ -1408,6 +1409,9 @@ static void qca_power_shutdown(struct hci_uart *hu)
> host_set_baudrate(hu, 2400);
> qca_send_power_pulse(hu, false);
> qca_regulator_disable(qcadev);
> +
> + if (qcadev->susclk)
> + clk_disable_unprepare(qcadev->susclk);
> }
>
> static int qca_power_off(struct hci_dev *hdev)
> @@ -1423,6 +1427,20 @@ static int qca_power_off(struct hci_dev *hdev)
> return 0;
> }
>
> +static int qca_power_on(struct qca_serdev *qcadev)
> +{
> + int err;
> +
> + if (qcadev->susclk) {
> + err = clk_prepare_enable(qcadev->susclk);
> + if (err)
> + return err;
> + }
> +
> + qca_regulator_enable(qcadev);
> + return 0;
> +}
> +
> static int qca_regulator_enable(struct qca_serdev *qcadev)
> {
> struct qca_power *power = qcadev->bt_power;
> @@ -1523,6 +1541,15 @@ static int qca_serdev_probe(struct serdev_device *serdev)
>
> qcadev->bt_power->vregs_on = false;
>
> + if (qcadev->btsoc_type == QCA_WCN3990 ||
> + qcadev->btsoc_type == QCA_WCN3991) {
There comes a point when using a switch statement is a lot easier to read. See if that has been reached and if there are other places that would benefit from a cleanup patch.
Regards
Marcel
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [PATCH v1] Bluetooth: hci_qca: Enable clocks required for BT SOC
2019-11-14 8:55 ` Marcel Holtmann
@ 2019-11-18 6:01 ` bgodavar
0 siblings, 0 replies; 7+ messages in thread
From: bgodavar @ 2019-11-18 6:01 UTC (permalink / raw)
To: Marcel Holtmann
Cc: Johan Hedberg, Matthias Kaehlcke, lkml, linux-bluetooth, hemantg,
linux-arm-msm, tientzu, seanpaul
On 2019-11-14 14:25, Marcel Holtmann wrote:
> Hi Balakrishna,
>
>> Instead of relying on other subsytem to turn ON clocks
>> required for BT SoC to operate, voting them from the driver.
>>
>> Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
>> ---
>> drivers/bluetooth/hci_qca.c | 31 +++++++++++++++++++++++++++++--
>> 1 file changed, 29 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
>> index f10bdf8e1fc5..dc95e378574b 100644
>> --- a/drivers/bluetooth/hci_qca.c
>> +++ b/drivers/bluetooth/hci_qca.c
>> @@ -164,6 +164,7 @@ struct qca_serdev {
>> };
>>
>> static int qca_regulator_enable(struct qca_serdev *qcadev);
>> +static int qca_power_on(struct qca_serdev *qcadev);
>
> I really dislike forward declaration. Only use them if they are really
> really needed. That said, this driver might actually need cleanups
> since I just realized it has tons of forward declarations.
>
[Bala]: agree, will work on this change.
>> static void qca_regulator_disable(struct qca_serdev *qcadev);
>> static void qca_power_shutdown(struct hci_uart *hu);
>> static int qca_power_off(struct hci_dev *hdev);
>> @@ -528,7 +529,7 @@ static int qca_open(struct hci_uart *hu)
>> } else {
>> hu->init_speed = qcadev->init_speed;
>> hu->oper_speed = qcadev->oper_speed;
>> - ret = qca_regulator_enable(qcadev);
>> + ret = qca_power_on(qcadev);
>> if (ret) {
>> destroy_workqueue(qca->workqueue);
>> kfree_skb(qca->rx_skb);
>> @@ -1214,7 +1215,7 @@ static int qca_wcn3990_init(struct hci_uart *hu)
>> qcadev = serdev_device_get_drvdata(hu->serdev);
>> if (!qcadev->bt_power->vregs_on) {
>> serdev_device_close(hu->serdev);
>> - ret = qca_regulator_enable(qcadev);
>> + ret = qca_power_on(qcadev);
>> if (ret)
>> return ret;
>>
>> @@ -1408,6 +1409,9 @@ static void qca_power_shutdown(struct hci_uart
>> *hu)
>> host_set_baudrate(hu, 2400);
>> qca_send_power_pulse(hu, false);
>> qca_regulator_disable(qcadev);
>> +
>> + if (qcadev->susclk)
>> + clk_disable_unprepare(qcadev->susclk);
>> }
>>
>> static int qca_power_off(struct hci_dev *hdev)
>> @@ -1423,6 +1427,20 @@ static int qca_power_off(struct hci_dev *hdev)
>> return 0;
>> }
>>
>> +static int qca_power_on(struct qca_serdev *qcadev)
>> +{
>> + int err;
>> +
>> + if (qcadev->susclk) {
>> + err = clk_prepare_enable(qcadev->susclk);
>> + if (err)
>> + return err;
>> + }
>> +
>> + qca_regulator_enable(qcadev);
>> + return 0;
>> +}
>> +
>> static int qca_regulator_enable(struct qca_serdev *qcadev)
>> {
>> struct qca_power *power = qcadev->bt_power;
>> @@ -1523,6 +1541,15 @@ static int qca_serdev_probe(struct
>> serdev_device *serdev)
>>
>> qcadev->bt_power->vregs_on = false;
>>
>> + if (qcadev->btsoc_type == QCA_WCN3990 ||
>> + qcadev->btsoc_type == QCA_WCN3991) {
>
> There comes a point when using a switch statement is a lot easier to
> read. See if that has been reached and if there are other places that
> would benefit from a cleanup patch.
>
[Bala] : will work on this.
> Regards
>
> Marcel
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v1] Bluetooth: hci_qca: Enable clocks required for BT SOC
2019-11-14 8:14 [PATCH v1] Bluetooth: hci_qca: Enable clocks required for BT SOC Balakrishna Godavarthi
2019-11-14 8:55 ` Marcel Holtmann
@ 2019-11-14 17:19 ` Stephen Boyd
2019-11-18 6:21 ` bgodavar
2019-12-12 17:43 ` Matthias Kaehlcke
2 siblings, 1 reply; 7+ messages in thread
From: Stephen Boyd @ 2019-11-14 17:19 UTC (permalink / raw)
To: Balakrishna Godavarthi, johan.hedberg, marcel
Cc: mka, linux-kernel, linux-bluetooth, hemantg, linux-arm-msm,
bgodavar, tientzu, seanpaul
Quoting Balakrishna Godavarthi (2019-11-14 00:14:30)
> @@ -1423,6 +1427,20 @@ static int qca_power_off(struct hci_dev *hdev)
> return 0;
> }
>
> +static int qca_power_on(struct qca_serdev *qcadev)
> +{
> + int err;
> +
> + if (qcadev->susclk) {
clk_prepare_enable() shouldn't return anything besides 0 when passed a
NULL pointer. Please drop this if condition in addition to the one on
the clk_disable_unprepare().
> + err = clk_prepare_enable(qcadev->susclk);
> + if (err)
> + return err;
> + }
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [PATCH v1] Bluetooth: hci_qca: Enable clocks required for BT SOC
2019-11-14 17:19 ` Stephen Boyd
@ 2019-11-18 6:21 ` bgodavar
0 siblings, 0 replies; 7+ messages in thread
From: bgodavar @ 2019-11-18 6:21 UTC (permalink / raw)
To: Stephen Boyd
Cc: johan.hedberg, marcel, mka, linux-kernel, linux-bluetooth,
hemantg, linux-arm-msm, tientzu, seanpaul
Hi Stephen,
On 2019-11-14 22:49, Stephen Boyd wrote:
> Quoting Balakrishna Godavarthi (2019-11-14 00:14:30)
>> @@ -1423,6 +1427,20 @@ static int qca_power_off(struct hci_dev *hdev)
>> return 0;
>> }
>>
>> +static int qca_power_on(struct qca_serdev *qcadev)
>> +{
>> + int err;
>> +
>> + if (qcadev->susclk) {
>
> clk_prepare_enable() shouldn't return anything besides 0 when passed a
> NULL pointer. Please drop this if condition in addition to the one on
> the clk_disable_unprepare().
>
>> + err = clk_prepare_enable(qcadev->susclk);
>> + if (err)
>> + return err;
>> + }
[Bala]: will update.
Regards
Balakrishna
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v1] Bluetooth: hci_qca: Enable clocks required for BT SOC
2019-11-14 8:14 [PATCH v1] Bluetooth: hci_qca: Enable clocks required for BT SOC Balakrishna Godavarthi
2019-11-14 8:55 ` Marcel Holtmann
2019-11-14 17:19 ` Stephen Boyd
@ 2019-12-12 17:43 ` Matthias Kaehlcke
2020-01-14 11:34 ` bgodavar
2 siblings, 1 reply; 7+ messages in thread
From: Matthias Kaehlcke @ 2019-12-12 17:43 UTC (permalink / raw)
To: Balakrishna Godavarthi
Cc: marcel, johan.hedberg, linux-kernel, linux-bluetooth, hemantg,
linux-arm-msm, tientzu, seanpaul
On Thu, Nov 14, 2019 at 01:44:30PM +0530, Balakrishna Godavarthi wrote:
> Instead of relying on other subsytem to turn ON clocks
> required for BT SoC to operate, voting them from the driver.
>
> Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
> ---
> drivers/bluetooth/hci_qca.c | 31 +++++++++++++++++++++++++++++--
> 1 file changed, 29 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
> index f10bdf8e1fc5..dc95e378574b 100644
> --- a/drivers/bluetooth/hci_qca.c
> +++ b/drivers/bluetooth/hci_qca.c
> @@ -164,6 +164,7 @@ struct qca_serdev {
> };
>
> static int qca_regulator_enable(struct qca_serdev *qcadev);
> +static int qca_power_on(struct qca_serdev *qcadev);
> static void qca_regulator_disable(struct qca_serdev *qcadev);
> static void qca_power_shutdown(struct hci_uart *hu);
> static int qca_power_off(struct hci_dev *hdev);
> @@ -528,7 +529,7 @@ static int qca_open(struct hci_uart *hu)
> } else {
> hu->init_speed = qcadev->init_speed;
> hu->oper_speed = qcadev->oper_speed;
> - ret = qca_regulator_enable(qcadev);
> + ret = qca_power_on(qcadev);
> if (ret) {
> destroy_workqueue(qca->workqueue);
> kfree_skb(qca->rx_skb);
> @@ -1214,7 +1215,7 @@ static int qca_wcn3990_init(struct hci_uart *hu)
> qcadev = serdev_device_get_drvdata(hu->serdev);
> if (!qcadev->bt_power->vregs_on) {
> serdev_device_close(hu->serdev);
> - ret = qca_regulator_enable(qcadev);
> + ret = qca_power_on(qcadev);
> if (ret)
> return ret;
>
> @@ -1408,6 +1409,9 @@ static void qca_power_shutdown(struct hci_uart *hu)
> host_set_baudrate(hu, 2400);
> qca_send_power_pulse(hu, false);
> qca_regulator_disable(qcadev);
> +
> + if (qcadev->susclk)
> + clk_disable_unprepare(qcadev->susclk);
> }
>
> static int qca_power_off(struct hci_dev *hdev)
> @@ -1423,6 +1427,20 @@ static int qca_power_off(struct hci_dev *hdev)
> return 0;
> }
>
> +static int qca_power_on(struct qca_serdev *qcadev)
> +{
> + int err;
> +
> + if (qcadev->susclk) {
> + err = clk_prepare_enable(qcadev->susclk);
> + if (err)
> + return err;
> + }
> +
> + qca_regulator_enable(qcadev);
> + return 0;
> +}
> +
> static int qca_regulator_enable(struct qca_serdev *qcadev)
> {
> struct qca_power *power = qcadev->bt_power;
> @@ -1523,6 +1541,15 @@ static int qca_serdev_probe(struct serdev_device *serdev)
>
> qcadev->bt_power->vregs_on = false;
>
> + if (qcadev->btsoc_type == QCA_WCN3990 ||
> + qcadev->btsoc_type == QCA_WCN3991) {
> + qcadev->susclk = devm_clk_get(&serdev->dev, NULL);
> + if (IS_ERR(qcadev->susclk)) {
> + dev_err(&serdev->dev, "failed to acquire clk\n");
> + return PTR_ERR(qcadev->susclk);
> + }
This will break existing users. Use devm_clk_get_optional() and at most
raise a warning if the clock doesn't exist.
It would also be nice to add the clock to the affected devices in the tree
if possible:
arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi: compatible = "qcom,wcn3990-bt";
arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi: compatible = "qcom,wcn3990-bt";
arch/arm64/boot/dts/qcom/qcs404-evb.dtsi: compatible = "qcom,wcn3990-bt";
arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi: compatible = "qcom,wcn3990-bt";
arch/arm64/boot/dts/qcom/sdm845-db845c.dts: compatible = "qcom,wcn3990-bt";
arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts: compatible = "qcom,wcn3990-bt";
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [PATCH v1] Bluetooth: hci_qca: Enable clocks required for BT SOC
2019-12-12 17:43 ` Matthias Kaehlcke
@ 2020-01-14 11:34 ` bgodavar
0 siblings, 0 replies; 7+ messages in thread
From: bgodavar @ 2020-01-14 11:34 UTC (permalink / raw)
To: Matthias Kaehlcke
Cc: marcel, johan.hedberg, linux-kernel, linux-bluetooth, hemantg,
linux-arm-msm, tientzu, seanpaul, gubbaven
Hi Matthias,
sorry missed you mail.
On 2019-12-12 23:13, Matthias Kaehlcke wrote:
> On Thu, Nov 14, 2019 at 01:44:30PM +0530, Balakrishna Godavarthi wrote:
>> Instead of relying on other subsytem to turn ON clocks
>> required for BT SoC to operate, voting them from the driver.
>>
>> Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
>> ---
>> drivers/bluetooth/hci_qca.c | 31 +++++++++++++++++++++++++++++--
>> 1 file changed, 29 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
>> index f10bdf8e1fc5..dc95e378574b 100644
>> --- a/drivers/bluetooth/hci_qca.c
>> +++ b/drivers/bluetooth/hci_qca.c
>> @@ -164,6 +164,7 @@ struct qca_serdev {
>> };
>>
>> static int qca_regulator_enable(struct qca_serdev *qcadev);
>> +static int qca_power_on(struct qca_serdev *qcadev);
>> static void qca_regulator_disable(struct qca_serdev *qcadev);
>> static void qca_power_shutdown(struct hci_uart *hu);
>> static int qca_power_off(struct hci_dev *hdev);
>> @@ -528,7 +529,7 @@ static int qca_open(struct hci_uart *hu)
>> } else {
>> hu->init_speed = qcadev->init_speed;
>> hu->oper_speed = qcadev->oper_speed;
>> - ret = qca_regulator_enable(qcadev);
>> + ret = qca_power_on(qcadev);
>> if (ret) {
>> destroy_workqueue(qca->workqueue);
>> kfree_skb(qca->rx_skb);
>> @@ -1214,7 +1215,7 @@ static int qca_wcn3990_init(struct hci_uart *hu)
>> qcadev = serdev_device_get_drvdata(hu->serdev);
>> if (!qcadev->bt_power->vregs_on) {
>> serdev_device_close(hu->serdev);
>> - ret = qca_regulator_enable(qcadev);
>> + ret = qca_power_on(qcadev);
>> if (ret)
>> return ret;
>>
>> @@ -1408,6 +1409,9 @@ static void qca_power_shutdown(struct hci_uart
>> *hu)
>> host_set_baudrate(hu, 2400);
>> qca_send_power_pulse(hu, false);
>> qca_regulator_disable(qcadev);
>> +
>> + if (qcadev->susclk)
>> + clk_disable_unprepare(qcadev->susclk);
>> }
>>
>> static int qca_power_off(struct hci_dev *hdev)
>> @@ -1423,6 +1427,20 @@ static int qca_power_off(struct hci_dev *hdev)
>> return 0;
>> }
>>
>> +static int qca_power_on(struct qca_serdev *qcadev)
>> +{
>> + int err;
>> +
>> + if (qcadev->susclk) {
>> + err = clk_prepare_enable(qcadev->susclk);
>> + if (err)
>> + return err;
>> + }
>> +
>> + qca_regulator_enable(qcadev);
>> + return 0;
>> +}
>> +
>> static int qca_regulator_enable(struct qca_serdev *qcadev)
>> {
>> struct qca_power *power = qcadev->bt_power;
>> @@ -1523,6 +1541,15 @@ static int qca_serdev_probe(struct
>> serdev_device *serdev)
>>
>> qcadev->bt_power->vregs_on = false;
>>
>> + if (qcadev->btsoc_type == QCA_WCN3990 ||
>> + qcadev->btsoc_type == QCA_WCN3991) {
>> + qcadev->susclk = devm_clk_get(&serdev->dev, NULL);
>> + if (IS_ERR(qcadev->susclk)) {
>> + dev_err(&serdev->dev, "failed to acquire clk\n");
>> + return PTR_ERR(qcadev->susclk);
>> + }
>
> This will break existing users. Use devm_clk_get_optional() and at most
> raise a warning if the clock doesn't exist.
>
> It would also be nice to add the clock to the affected devices in the
> tree
> if possible:
>
[Bala]: Sure we will use devm_clk_get_optional() in the next patch.
We will check the effected areas and update the necessary as i see some
projects are not existing.
> arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi:
> compatible = "qcom,wcn3990-bt";
> arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi: compatible =
> "qcom,wcn3990-bt";
> arch/arm64/boot/dts/qcom/qcs404-evb.dtsi: compatible =
> "qcom,wcn3990-bt";
> arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi: compatible =
> "qcom,wcn3990-bt";
> arch/arm64/boot/dts/qcom/sdm845-db845c.dts: compatible =
> "qcom,wcn3990-bt";
> arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts:
> compatible = "qcom,wcn3990-bt";
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2020-01-14 11:34 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-14 8:14 [PATCH v1] Bluetooth: hci_qca: Enable clocks required for BT SOC Balakrishna Godavarthi
2019-11-14 8:55 ` Marcel Holtmann
2019-11-18 6:01 ` bgodavar
2019-11-14 17:19 ` Stephen Boyd
2019-11-18 6:21 ` bgodavar
2019-12-12 17:43 ` Matthias Kaehlcke
2020-01-14 11:34 ` bgodavar
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).