From: Marcel Holtmann <marcel@holtmann.org>
To: Kiran K <kiran.k@intel.com>
Cc: BlueZ <linux-bluetooth@vger.kernel.org>,
"Srivatsa, Ravishankar" <ravishankar.srivatsa@intel.com>,
chethan.tumkur.narayan@intel.com
Subject: Re: [PATCH v11 02/10] Bluetooth: Add support for Read Local Supported Codecs V2
Date: Fri, 30 Jul 2021 16:07:40 +0200 [thread overview]
Message-ID: <0461C975-82DC-4C4F-8CA6-6D4D7289FFF8@holtmann.org> (raw)
In-Reply-To: <20210727084713.23038-2-kiran.k@intel.com>
Hi Kiran,
> Use V2 version of read local supported command is controller
> supports
>
> snoop:
>> HCI Event: Command Complete (0x0e) plen 20
> Read Local Supported Codecs V2 (0x04|0x000d) ncmd 1
> Status: Success (0x00)
> Number of supported codecs: 7
> Codec: u-law log (0x00)
> Logical Transport Type: 0x02
> Codec supported over BR/EDR SCO and eSCO
> Codec: A-law log (0x01)
> Logical Transport Type: 0x02
> Codec supported over BR/EDR SCO and eSCO
> Codec: CVSD (0x02)
> Logical Transport Type: 0x02
> Codec supported over BR/EDR SCO and eSCO
> Codec: Transparent (0x03)
> Logical Transport Type: 0x02
> Codec supported over BR/EDR SCO and eSCO
> Codec: Linear PCM (0x04)
> Logical Transport Type: 0x02
> Codec supported over BR/EDR SCO and eSCO
> Codec: Reserved (0x08)
> Logical Transport Type: 0x03
> Codec supported over BR/EDR ACL
> Codec supported over BR/EDR SCO and eSCO
> Codec: mSBC (0x05)
> Logical Transport Type: 0x03
> Codec supported over BR/EDR ACL
> Codec supported over BR/EDR SCO and eSCO
> Number of vendor codecs: 0
> ......
> < HCI Command: Read Local Suppor.. (0x04|0x000e) plen 7
> Codec: mSBC (0x05)
> Logical Transport Type: 0x00
> Direction: Input (Host to Controller) (0x00)
>> HCI Event: Command Complete (0x0e) plen 12
> Read Local Supported Codec Capabilities (0x04|0x000e) ncmd 1
> Status: Success (0x00)
> Number of codec capabilities: 1
> Capabilities #0:
> 00 00 11 15 02 33
>
> Signed-off-by: Kiran K <kiran.k@intel.com>
> Signed-off-by: Chethan T N <chethan.tumkur.narayan@intel.com>
> Signed-off-by: Srivatsa Ravishankar <ravishankar.srivatsa@intel.com>
> ---
> * changes in v11:
> - Remove Kconfig related changes
> - Move codec related functions to hci_codec.c
>
> * changes in v10:
> no changes
>
> * changes in v9:
> use vnd as shortcut name for vendor instead of ven
>
> * changes in v8:
> no changes
>
> * changes in v7:
> call codec enumeration code in hci_init instead of having it in a separate
> function
>
> * changes in v6
> no changes
>
> * changes in v5:
> fix review comments
>
> * changes in v4:
> converts codec read capabilities calls from async to sync
>
> * changes in v3:
> No changes
>
> * changes in v2:
> add length check for event data before accessing
> include/net/bluetooth/hci.h | 29 +++++++++++++++
> net/bluetooth/hci_codec.c | 74 +++++++++++++++++++++++++++++++++++++
> net/bluetooth/hci_codec.h | 1 +
> net/bluetooth/hci_core.c | 4 +-
> 4 files changed, 107 insertions(+), 1 deletion(-)
>
> diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
> index f76849c8eafd..b4e35cf5f4b1 100644
> --- a/include/net/bluetooth/hci.h
> +++ b/include/net/bluetooth/hci.h
> @@ -1337,6 +1337,35 @@ struct hci_rp_read_local_pairing_opts {
> __u8 max_key_size;
> } __packed;
>
> +#define HCI_OP_READ_LOCAL_CODECS_V2 0x100d
> +struct hci_std_codec_v2 {
> + __u8 id;
> + __u8 transport;
> +} __packed;
> +
> +struct hci_std_codecs_v2 {
> + __u8 num;
> + struct hci_std_codec_v2 codec[];
> +} __packed;
> +
> +struct hci_vnd_codec_v2 {
> + __u8 id;
> + __le16 cid;
> + __le16 vid;
> + __u8 transport;
> +} __packed;
> +
> +struct hci_vnd_codecs_v2 {
> + __u8 num;
> + struct hci_vnd_codec_v2 codec[];
> +} __packed;
> +
> +struct hci_rp_read_local_supported_codecs_v2 {
> + __u8 status;
> + struct hci_std_codecs_v2 std_codecs;
> + struct hci_vnd_codecs_v2 vendor_codecs;
> +} __packed;
> +
> #define HCI_OP_READ_LOCAL_CODEC_CAPS 0x100e
> struct hci_op_read_local_codec_caps {
> __u8 id;
> diff --git a/net/bluetooth/hci_codec.c b/net/bluetooth/hci_codec.c
> index 205f3b04c172..6f20a4b1fc9c 100644
> --- a/net/bluetooth/hci_codec.c
> +++ b/net/bluetooth/hci_codec.c
> @@ -192,3 +192,77 @@ void hci_read_supported_codecs(struct hci_dev *hdev)
> error:
> kfree_skb(skb);
> }
> +
> +static void hci_codec_list_parse_v2(struct hci_dev *hdev, __u8 num_codecs,
> + void *codec_list, bool is_vnd_codec)
> +{
> + __u8 i;
> +
> + for (i = 0; i < num_codecs; i++) {
> + if (!is_vnd_codec) {
> + struct hci_std_codecs_v2 *codecs = codec_list;
> +
> + hci_read_codec_capabilities(hdev, &codecs->codec[i],
> + codecs->codec[i].transport,
> + is_vnd_codec);
> + } else {
> + struct hci_vnd_codecs_v2 *codecs = codec_list;
> +
> + hci_read_codec_capabilities(hdev, &codecs->codec[i],
> + codecs->codec[i].transport,
> + is_vnd_codec);
> + }
> + }
> +}
> +
> +void hci_read_supported_codecs_v2(struct hci_dev *hdev)
> +{
> + struct sk_buff *skb;
> + struct hci_rp_read_local_supported_codecs_v2 *rp;
> + struct hci_std_codecs_v2 *std_codecs;
> + struct hci_vnd_codecs_v2 *vnd_codecs;
> +
> + skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_CODECS_V2, 0, NULL,
> + HCI_CMD_TIMEOUT);
> +
> + if (IS_ERR(skb)) {
> + bt_dev_err(hdev, "Failed to read local supported codecs (%ld)",
> + PTR_ERR(skb));
> + return;
> + }
> +
> + if (skb->len < sizeof(*rp))
> + goto error;
> +
> + rp = (void *)skb->data;
> +
> + if (rp->status)
> + goto error;
> +
> + skb_pull(skb, sizeof(rp->status));
> +
> + std_codecs = (void *)skb->data;
> +
> + /* check for payload data length before accessing */
> + if (skb->len < flex_array_size(std_codecs, codec, std_codecs->num)
> + + sizeof(std_codecs->num))
> + goto error;
> +
> + hci_codec_list_parse_v2(hdev, std_codecs->num, std_codecs, false);
> +
> + skb_pull(skb, flex_array_size(std_codecs, codec, std_codecs->num)
> + + sizeof(std_codecs->num));
> +
> + vnd_codecs = (void *)skb->data;
> +
> + /* check for payload data length before accessing */
> + if (skb->len <
> + flex_array_size(vnd_codecs, codec, vnd_codecs->num)
> + + sizeof(vnd_codecs->num))
> + goto error;
> +
> + hci_codec_list_parse_v2(hdev, vnd_codecs->num, vnd_codecs, true);
> +
> +error:
> + kfree_skb(skb);
> +}
once you apply my comments from the previous patch to this one as well, you will see that it looks a lot less complicated and entangled.
Regards
Marcel
next prev parent reply other threads:[~2021-07-30 14:07 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-27 8:47 [PATCH v11 01/10] Bluetooth: Enumerate local supported codec and cache details Kiran K
2021-07-27 8:47 ` [PATCH v11 02/10] Bluetooth: Add support for Read Local Supported Codecs V2 Kiran K
2021-07-30 14:07 ` Marcel Holtmann [this message]
2021-07-27 8:47 ` [PATCH v11 03/10] Bluetooth: btintel: Read supported offload usecases Kiran K
2021-07-30 14:10 ` Marcel Holtmann
2021-08-14 6:32 ` K, Kiran
2021-07-27 8:47 ` [PATCH v11 04/10] Bluetooth: Allow querying of supported offload codecs over SCO socket Kiran K
2021-07-30 14:14 ` Marcel Holtmann
2021-08-14 6:33 ` K, Kiran
2021-07-27 8:47 ` [PATCH v11 05/10] Bluetooth: btintel: Define callback to fetch data_path_id Kiran K
2021-07-27 8:47 ` [PATCH v11 06/10] Bluetooth: Allow setting of codec for HFP offload usecase Kiran K
2021-07-30 14:17 ` Marcel Holtmann
2021-08-01 23:45 ` K, Kiran
2021-08-14 6:39 ` K, Kiran
2021-07-27 8:47 ` [PATCH v11 07/10] Bluetooth: btintel: Define a callback to fetch codec config data Kiran K
2021-07-27 8:47 ` [PATCH v11 08/10] Bluetooth: Add support for HCI_Enhanced_Setup_Synchronous_Connection command Kiran K
2021-07-28 3:59 ` Luiz Augusto von Dentz
2021-08-14 6:41 ` K, Kiran
2021-07-27 8:47 ` [PATCH v11 09/10] Bluetooth: Add support for msbc coding format Kiran K
2021-07-27 8:47 ` [PATCH v11 10/10] Bluetooth: Add offload feature under experimental flag Kiran K
2021-07-30 14:22 ` Marcel Holtmann
2021-08-14 6:42 ` K, Kiran
2021-07-27 9:12 ` [v11,01/10] Bluetooth: Enumerate local supported codec and cache details bluez.test.bot
2021-07-30 14:06 ` [PATCH v11 01/10] " Marcel Holtmann
2021-08-02 0:23 ` K, Kiran
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0461C975-82DC-4C4F-8CA6-6D4D7289FFF8@holtmann.org \
--to=marcel@holtmann.org \
--cc=chethan.tumkur.narayan@intel.com \
--cc=kiran.k@intel.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=ravishankar.srivatsa@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).