* [Bluez PATCH] main: adding configurable eir_max_name_len
@ 2020-07-27 17:37 Alain Michaud
2020-07-28 6:58 ` Marcel Holtmann
0 siblings, 1 reply; 3+ messages in thread
From: Alain Michaud @ 2020-07-27 17:37 UTC (permalink / raw)
To: linux-bluetooth; +Cc: Alain Michaud, Sonny Sasaka
This change adds support for a configurable eir_max_name_len for
platforms which requires a larger than 48 bytes complete name in EIR.
From bluetoothctl:
[bluetooth]# system-alias
012345678901234567890123456789012345678901234567890123456789
Changing 012345678901234567890123456789012345678901234567890123456789
succeeded
[CHG] Controller DC:71:96:69:02:89 Alias:
012345678901234567890123456789012345678901234567890123456789
From btmon:
< HCI Command: Write Local Name (0x03|0x0013) plen 248 #109
[hci0] 88.567990
Name:
012345678901234567890123456789012345678901234567890123456789
> HCI Event: Command Complete (0x0e) plen 4
#110 [hci0] 88.663854
Write Local Name (0x03|0x0013) ncmd 1
Status: Success (0x00)
@ MGMT Event: Local Name Changed (0x0008) plen 260
{0x0004} [hci0] 88.663948
Name:
012345678901234567890123456789012345678901234567890123456789
Short name:
< HCI Command: Write Extended Inquiry Response (0x03|0x0052) plen 241
FEC: Not required (0x00)
Name (complete):
012345678901234567890123456789012345678901234567890123456789
TX power: 12 dBm
Device ID: Bluetooth SIG assigned (0x0001)
Vendor: Google (224)
Product: 0xc405
Version: 0.5.6 (0x0056)
16-bit Service UUIDs (complete): 7 entries
Generic Access Profile (0x1800)
Generic Attribute Profile (0x1801)
Device Information (0x180a)
A/V Remote Control (0x110e)
A/V Remote Control Target (0x110c)
Handsfree Audio Gateway (0x111f)
Audio Source (0x110a)
> HCI Event: Command Complete (0x0e) plen 4
Write Extended Inquiry Response (0x03|0x0052) ncmd 1
Status: Success (0x00)
Reviewed-by: Sonny Sasaka <sonnysasaka@chromium.org>
Signed-off-by: Alain Michaud <alainm@chromium.org>
---
doc/mgmt-api.txt | 1 +
src/adapter.c | 10 +++++++++-
src/hcid.h | 1 +
src/main.c | 5 +++++
src/main.conf | 5 +++++
5 files changed, 21 insertions(+), 1 deletion(-)
diff --git a/doc/mgmt-api.txt b/doc/mgmt-api.txt
index ca0d38469..1bc0f0c12 100644
--- a/doc/mgmt-api.txt
+++ b/doc/mgmt-api.txt
@@ -3279,6 +3279,7 @@ Read Default System Configuration Command
0x0019 LE Connection Latency
0x001a LE Connection Supervision Timeout
0x001b LE Autoconnect Timeout
+ 0x001c Max EIR Name Length
This command can be used at any time and will return a list of
supported default parameters as well as their current value.
diff --git a/src/adapter.c b/src/adapter.c
index 5e896a9f0..3adc67b63 100644
--- a/src/adapter.c
+++ b/src/adapter.c
@@ -2375,7 +2375,7 @@ static bool parse_pathloss(DBusMessageIter *value,
return true;
}
-static bool parse_transport(DBusMessageIter *value,
+static bool parse_transport(DBusMessageIter *value,
struct discovery_filter *filter)
{
char *transport_str;
@@ -4435,6 +4435,14 @@ static void load_default_system_params(struct btd_adapter *adapter)
len += sizeof(params[i].u16);
}
+ if (main_opts.default_params.eir_max_name_len) {
+ params[i].entry.type = 0x001c;
+ params[i].entry.length = sizeof(params[i].u16);
+ params[i].u16 = main_opts.default_params.eir_max_name_len;
+ ++i;
+ len += sizeof(params[i].u16);
+ }
+
err = mgmt_send(adapter->mgmt, MGMT_OP_SET_DEF_SYSTEM_CONFIG,
adapter->dev_id, len, params, NULL, NULL, NULL);
if (!err)
diff --git a/src/hcid.h b/src/hcid.h
index 5f249ebf9..c9b59a374 100644
--- a/src/hcid.h
+++ b/src/hcid.h
@@ -93,6 +93,7 @@ struct main_opts {
uint16_t le_conn_latency;
uint16_t le_conn_lsto;
uint16_t le_autoconnect_timeout;
+ uint16_t eir_max_name_len;
} default_params;
diff --git a/src/main.c b/src/main.c
index ec7a9fbd7..74876e01d 100644
--- a/src/main.c
+++ b/src/main.c
@@ -123,6 +123,7 @@ static const char *controller_options[] = {
"LEConnectionLatency",
"LEConnectionSupervisionTimeout",
"LEAutoconnecttimeout",
+ "EirMaxNameLength",
NULL
};
@@ -433,6 +434,10 @@ static void parse_controller_config(GKeyFile *config)
&main_opts.default_params.le_autoconnect_timeout,
0x0001,
0x4000},
+ { "EirMaxNameLength",
+ &main_opts.default_params.eir_max_name_len,
+ 0x0001,
+ 0x00EE},
};
uint16_t i;
diff --git a/src/main.conf b/src/main.conf
index f41203b96..7ecac5930 100644
--- a/src/main.conf
+++ b/src/main.conf
@@ -148,6 +148,11 @@
#LEConnectionSupervisionTimeout=
#LEAutoconnecttimeout=
+# EIR Max Name. This is the maximum length for the COMPLETE_NAME EIR section.
+# If the name length exceeds this size, a SHORT_NAME section is used.
+# Default: 48
+#EirMaxNameLength = 48
+
[GATT]
# GATT attribute cache.
# Possible values:
--
2.28.0.rc0.142.g3c755180ce-goog
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [Bluez PATCH] main: adding configurable eir_max_name_len
2020-07-27 17:37 [Bluez PATCH] main: adding configurable eir_max_name_len Alain Michaud
@ 2020-07-28 6:58 ` Marcel Holtmann
2020-07-28 13:10 ` Alain Michaud
0 siblings, 1 reply; 3+ messages in thread
From: Marcel Holtmann @ 2020-07-28 6:58 UTC (permalink / raw)
To: Alain Michaud; +Cc: linux-bluetooth, Sonny Sasaka
Hi Alain,
> This change adds support for a configurable eir_max_name_len for
> platforms which requires a larger than 48 bytes complete name in EIR.
>
> From bluetoothctl:
> [bluetooth]# system-alias
> 012345678901234567890123456789012345678901234567890123456789
> Changing 012345678901234567890123456789012345678901234567890123456789
> succeeded
> [CHG] Controller DC:71:96:69:02:89 Alias:
> 012345678901234567890123456789012345678901234567890123456789
>
> From btmon:
> < HCI Command: Write Local Name (0x03|0x0013) plen 248 #109
> [hci0] 88.567990
> Name:
> 012345678901234567890123456789012345678901234567890123456789
>> HCI Event: Command Complete (0x0e) plen 4
> #110 [hci0] 88.663854
> Write Local Name (0x03|0x0013) ncmd 1
> Status: Success (0x00)
> @ MGMT Event: Local Name Changed (0x0008) plen 260
> {0x0004} [hci0] 88.663948
> Name:
> 012345678901234567890123456789012345678901234567890123456789
> Short name:
> < HCI Command: Write Extended Inquiry Response (0x03|0x0052) plen 241
> FEC: Not required (0x00)
> Name (complete):
> 012345678901234567890123456789012345678901234567890123456789
> TX power: 12 dBm
> Device ID: Bluetooth SIG assigned (0x0001)
> Vendor: Google (224)
> Product: 0xc405
> Version: 0.5.6 (0x0056)
> 16-bit Service UUIDs (complete): 7 entries
> Generic Access Profile (0x1800)
> Generic Attribute Profile (0x1801)
> Device Information (0x180a)
> A/V Remote Control (0x110e)
> A/V Remote Control Target (0x110c)
> Handsfree Audio Gateway (0x111f)
> Audio Source (0x110a)
>> HCI Event: Command Complete (0x0e) plen 4
> Write Extended Inquiry Response (0x03|0x0052) ncmd 1
> Status: Success (0x00)
>
> Reviewed-by: Sonny Sasaka <sonnysasaka@chromium.org>
> Signed-off-by: Alain Michaud <alainm@chromium.org>
> ---
>
> doc/mgmt-api.txt | 1 +
> src/adapter.c | 10 +++++++++-
> src/hcid.h | 1 +
> src/main.c | 5 +++++
> src/main.conf | 5 +++++
> 5 files changed, 21 insertions(+), 1 deletion(-)
>
> diff --git a/doc/mgmt-api.txt b/doc/mgmt-api.txt
> index ca0d38469..1bc0f0c12 100644
> --- a/doc/mgmt-api.txt
> +++ b/doc/mgmt-api.txt
> @@ -3279,6 +3279,7 @@ Read Default System Configuration Command
> 0x0019 LE Connection Latency
> 0x001a LE Connection Supervision Timeout
> 0x001b LE Autoconnect Timeout
> + 0x001c Max EIR Name Length
we can certainly do this, but I prefer that do this for LE and BR/EDR and name it that way as well.
>
> This command can be used at any time and will return a list of
> supported default parameters as well as their current value.
> diff --git a/src/adapter.c b/src/adapter.c
> index 5e896a9f0..3adc67b63 100644
> --- a/src/adapter.c
> +++ b/src/adapter.c
> @@ -2375,7 +2375,7 @@ static bool parse_pathloss(DBusMessageIter *value,
> return true;
> }
>
> -static bool parse_transport(DBusMessageIter *value,
> +static bool parse_transport(DBusMessageIter *value,
> struct discovery_filter *filter)
> {
> char *transport_str;
> @@ -4435,6 +4435,14 @@ static void load_default_system_params(struct btd_adapter *adapter)
> len += sizeof(params[i].u16);
> }
>
> + if (main_opts.default_params.eir_max_name_len) {
> + params[i].entry.type = 0x001c;
> + params[i].entry.length = sizeof(params[i].u16);
> + params[i].u16 = main_opts.default_params.eir_max_name_len;
> + ++i;
> + len += sizeof(params[i].u16);
> + }
> +
Do you really want to keep it as uint16_t or is that just laziness since changing the kernel to support anything other than uint16_t is complicated?
On a side note, you need to provide a uint16_t value in little endian to the MGMT wire protocol.
> err = mgmt_send(adapter->mgmt, MGMT_OP_SET_DEF_SYSTEM_CONFIG,
> adapter->dev_id, len, params, NULL, NULL, NULL);
> if (!err)
> diff --git a/src/hcid.h b/src/hcid.h
> index 5f249ebf9..c9b59a374 100644
> --- a/src/hcid.h
> +++ b/src/hcid.h
> @@ -93,6 +93,7 @@ struct main_opts {
> uint16_t le_conn_latency;
> uint16_t le_conn_lsto;
> uint16_t le_autoconnect_timeout;
> + uint16_t eir_max_name_len;
> } default_params;
>
>
> diff --git a/src/main.c b/src/main.c
> index ec7a9fbd7..74876e01d 100644
> --- a/src/main.c
> +++ b/src/main.c
> @@ -123,6 +123,7 @@ static const char *controller_options[] = {
> "LEConnectionLatency",
> "LEConnectionSupervisionTimeout",
> "LEAutoconnecttimeout",
> + "EirMaxNameLength",
> NULL
> };
>
> @@ -433,6 +434,10 @@ static void parse_controller_config(GKeyFile *config)
> &main_opts.default_params.le_autoconnect_timeout,
> 0x0001,
> 0x4000},
> + { "EirMaxNameLength",
> + &main_opts.default_params.eir_max_name_len,
> + 0x0001,
> + 0x00EE},
> };
> uint16_t i;
>
> diff --git a/src/main.conf b/src/main.conf
> index f41203b96..7ecac5930 100644
> --- a/src/main.conf
> +++ b/src/main.conf
> @@ -148,6 +148,11 @@
> #LEConnectionSupervisionTimeout=
> #LEAutoconnecttimeout=
>
> +# EIR Max Name. This is the maximum length for the COMPLETE_NAME EIR section.
> +# If the name length exceeds this size, a SHORT_NAME section is used.
> +# Default: 48
> +#EirMaxNameLength = 48
> +
> [GATT]
> # GATT attribute cache.
> # Possible values:
Regards
Marcel
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [Bluez PATCH] main: adding configurable eir_max_name_len
2020-07-28 6:58 ` Marcel Holtmann
@ 2020-07-28 13:10 ` Alain Michaud
0 siblings, 0 replies; 3+ messages in thread
From: Alain Michaud @ 2020-07-28 13:10 UTC (permalink / raw)
To: Marcel Holtmann; +Cc: Alain Michaud, linux-bluetooth, Sonny Sasaka
On Tue, Jul 28, 2020 at 2:58 AM Marcel Holtmann <marcel@holtmann.org> wrote:
>
> Hi Alain,
>
> > This change adds support for a configurable eir_max_name_len for
> > platforms which requires a larger than 48 bytes complete name in EIR.
> >
> > From bluetoothctl:
> > [bluetooth]# system-alias
> > 012345678901234567890123456789012345678901234567890123456789
> > Changing 012345678901234567890123456789012345678901234567890123456789
> > succeeded
> > [CHG] Controller DC:71:96:69:02:89 Alias:
> > 012345678901234567890123456789012345678901234567890123456789
> >
> > From btmon:
> > < HCI Command: Write Local Name (0x03|0x0013) plen 248 #109
> > [hci0] 88.567990
> > Name:
> > 012345678901234567890123456789012345678901234567890123456789
> >> HCI Event: Command Complete (0x0e) plen 4
> > #110 [hci0] 88.663854
> > Write Local Name (0x03|0x0013) ncmd 1
> > Status: Success (0x00)
> > @ MGMT Event: Local Name Changed (0x0008) plen 260
> > {0x0004} [hci0] 88.663948
> > Name:
> > 012345678901234567890123456789012345678901234567890123456789
> > Short name:
> > < HCI Command: Write Extended Inquiry Response (0x03|0x0052) plen 241
> > FEC: Not required (0x00)
> > Name (complete):
> > 012345678901234567890123456789012345678901234567890123456789
> > TX power: 12 dBm
> > Device ID: Bluetooth SIG assigned (0x0001)
> > Vendor: Google (224)
> > Product: 0xc405
> > Version: 0.5.6 (0x0056)
> > 16-bit Service UUIDs (complete): 7 entries
> > Generic Access Profile (0x1800)
> > Generic Attribute Profile (0x1801)
> > Device Information (0x180a)
> > A/V Remote Control (0x110e)
> > A/V Remote Control Target (0x110c)
> > Handsfree Audio Gateway (0x111f)
> > Audio Source (0x110a)
> >> HCI Event: Command Complete (0x0e) plen 4
> > Write Extended Inquiry Response (0x03|0x0052) ncmd 1
> > Status: Success (0x00)
> >
> > Reviewed-by: Sonny Sasaka <sonnysasaka@chromium.org>
> > Signed-off-by: Alain Michaud <alainm@chromium.org>
> > ---
> >
> > doc/mgmt-api.txt | 1 +
> > src/adapter.c | 10 +++++++++-
> > src/hcid.h | 1 +
> > src/main.c | 5 +++++
> > src/main.conf | 5 +++++
> > 5 files changed, 21 insertions(+), 1 deletion(-)
> >
> > diff --git a/doc/mgmt-api.txt b/doc/mgmt-api.txt
> > index ca0d38469..1bc0f0c12 100644
> > --- a/doc/mgmt-api.txt
> > +++ b/doc/mgmt-api.txt
> > @@ -3279,6 +3279,7 @@ Read Default System Configuration Command
> > 0x0019 LE Connection Latency
> > 0x001a LE Connection Supervision Timeout
> > 0x001b LE Autoconnect Timeout
> > + 0x001c Max EIR Name Length
>
> we can certainly do this, but I prefer that do this for LE and BR/EDR and name it that way as well.
I do think that we need distinct values for br/edr and le since the
available space is different. I don't think a single value makes
sense for both transports.
>
> >
> > This command can be used at any time and will return a list of
> > supported default parameters as well as their current value.
> > diff --git a/src/adapter.c b/src/adapter.c
> > index 5e896a9f0..3adc67b63 100644
> > --- a/src/adapter.c
> > +++ b/src/adapter.c
> > @@ -2375,7 +2375,7 @@ static bool parse_pathloss(DBusMessageIter *value,
> > return true;
> > }
> >
> > -static bool parse_transport(DBusMessageIter *value,
> > +static bool parse_transport(DBusMessageIter *value,
> > struct discovery_filter *filter)
> > {
> > char *transport_str;
> > @@ -4435,6 +4435,14 @@ static void load_default_system_params(struct btd_adapter *adapter)
> > len += sizeof(params[i].u16);
> > }
> >
> > + if (main_opts.default_params.eir_max_name_len) {
> > + params[i].entry.type = 0x001c;
> > + params[i].entry.length = sizeof(params[i].u16);
> > + params[i].u16 = main_opts.default_params.eir_max_name_len;
> > + ++i;
> > + len += sizeof(params[i].u16);
> > + }
> > +
>
> Do you really want to keep it as uint16_t or is that just laziness since changing the kernel to support anything other than uint16_t is complicated?
Yes, this is to re-use the existing infra without complicating the
buffer structure. There are a couple more values that are effectively
uint8_t but use uint16_t above (like page scan type).
>
> On a side note, you need to provide a uint16_t value in little endian to the MGMT wire protocol.
Sounds like this is a separate issue that needs to be fixed for all
values then. I'd rather keep that as a separate patch.
>
> > err = mgmt_send(adapter->mgmt, MGMT_OP_SET_DEF_SYSTEM_CONFIG,
> > adapter->dev_id, len, params, NULL, NULL, NULL);
> > if (!err)
> > diff --git a/src/hcid.h b/src/hcid.h
> > index 5f249ebf9..c9b59a374 100644
> > --- a/src/hcid.h
> > +++ b/src/hcid.h
> > @@ -93,6 +93,7 @@ struct main_opts {
> > uint16_t le_conn_latency;
> > uint16_t le_conn_lsto;
> > uint16_t le_autoconnect_timeout;
> > + uint16_t eir_max_name_len;
> > } default_params;
> >
> >
> > diff --git a/src/main.c b/src/main.c
> > index ec7a9fbd7..74876e01d 100644
> > --- a/src/main.c
> > +++ b/src/main.c
> > @@ -123,6 +123,7 @@ static const char *controller_options[] = {
> > "LEConnectionLatency",
> > "LEConnectionSupervisionTimeout",
> > "LEAutoconnecttimeout",
> > + "EirMaxNameLength",
> > NULL
> > };
> >
> > @@ -433,6 +434,10 @@ static void parse_controller_config(GKeyFile *config)
> > &main_opts.default_params.le_autoconnect_timeout,
> > 0x0001,
> > 0x4000},
> > + { "EirMaxNameLength",
> > + &main_opts.default_params.eir_max_name_len,
> > + 0x0001,
> > + 0x00EE},
> > };
> > uint16_t i;
> >
> > diff --git a/src/main.conf b/src/main.conf
> > index f41203b96..7ecac5930 100644
> > --- a/src/main.conf
> > +++ b/src/main.conf
> > @@ -148,6 +148,11 @@
> > #LEConnectionSupervisionTimeout=
> > #LEAutoconnecttimeout=
> >
> > +# EIR Max Name. This is the maximum length for the COMPLETE_NAME EIR section.
> > +# If the name length exceeds this size, a SHORT_NAME section is used.
> > +# Default: 48
> > +#EirMaxNameLength = 48
> > +
> > [GATT]
> > # GATT attribute cache.
> > # Possible values:
>
> Regards
>
> Marcel
>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-07-28 13:10 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-27 17:37 [Bluez PATCH] main: adding configurable eir_max_name_len Alain Michaud
2020-07-28 6:58 ` Marcel Holtmann
2020-07-28 13:10 ` Alain Michaud
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).