From: Eisenkolb Thomas <Eisenkolb.Thomas@fronius.com>
To: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Cc: "linux-bluetooth@vger.kernel.org" <linux-bluetooth@vger.kernel.org>
Subject: AW: Bluetooth: Is it possible to operate Bluez concurrent in central and peripheral role?
Date: Fri, 12 Oct 2018 11:15:36 +0000 [thread overview]
Message-ID: <1a98ed47a70446f08fea529bcd85eafc@fronius.com> (raw)
In-Reply-To: <CABBYNZKWhK5NKQqpgXqTAFcaBkVM=CrSLtuxzD=MPyw6p-es7A@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 3463 bytes --]
Hello Luiz,
I have now tried the same procedure with my desktop linux pc instead of the embedded linux device.
The result is the same but I think in the logs is now more useful information.
It is also a Bluetooth 4.2 hardware but this time with an intel chipset.
I have tried two cases(the same procedure as before).
1) first I established a connection from the smartphone to the desktop(desktop as peripheral device)
2) try to establish a connection from desktop to the sensor(desktop as central device) using the command "connect 88:...." in blutoothctl tool while the connection between smartphone and desktop is still established
The device was successfully discovered and is still available and waiting for connection.
a) desktop starts passive device scan.
b) sensor sends scan response.
c) after the scan response is received, desktop disables the device scan
d) no further action at hci interface(expected le connection attempt command)
e) bluetoothctl runs into timeout and logs "Failed to connect: org.bluez.Error.Failed"
After that I disconnected the smartphone from the desktop and did the same as mentioned in point 2.
The only difference in this case is that the connection attempt command is immediately sent after the passive device scan is disabled(point 2.c).
Maybe this is more helpful than the last answer.
Should I set any special flags that I get it to work?
Thanks.
Best Regards,
Thomas Eisenkolb
Hi Thomas,
On Thu, Oct 11, 2018 at 10:18 AM Eisenkolb Thomas <Eisenkolb.Thomas@fronius.com> wrote:
>
> Hello,
>
> I am working with blueZ 5.50 on a linux embedded device with kernel 4.14.
>
> Now I have to implement a use case where the linux embedded device communicates as a central device with a few sensors through Bluetooth LE characteristics and at the same time it should advertise some data and accept at least one incoming connection from a Smartphone as a peripheral device for maintenance cases.
>
> I haven't found any information about blueZ is supporting both LE roles at the same time.
> I have already tried it now for 2 days to get this use case to work and I found a few limitations for which I didn't find any solution.
>
> I was not able to advertise any data while my device had an active connection to a peripheral device.
> Also while the Smartphone is connected to my embedded device(peripheral), I don't receive any advertised Data from any sensor and I cannot connect to any sensor.
>
> The Bluetooth Hardware Module which I am using on the embedded Linux System supports Bluetooth 4.2. From the Bluetooth Standard I have found that concurrent use of both Bluetooth Low Energy Roles should be supported since Bluetooth 4.1.
>
> Is it possible from blueZ Stack side to implement this use-case?
BlueZ should work as dual roles already, if it doesn't there could bugs or the controller preventing commands to work properly.
> If yes, can you give me some hints what I have to consider to get this case working?
Do you have HCI logs of the problem(s)?
> If no, have you got a timeline when it will be supported or is this no planned to implement in near future?
Most of upstream effort is on mesh and updates to include 5.0 features, but dual-role is something that we might consider high priority if that is not working properly.
>
> Thanks for your answer,
> Thomas
>
>
--
Luiz Augusto von Dentz
[-- Attachment #2: bluetoothctl.log --]
[-- Type: application/octet-stream, Size: 11440 bytes --]
[bluetooth]# list
Controller 28:16:AD:A1:8C:E4 linux-host [default]
[CHG] Controller 28:16:AD:A1:8C:E4 DiscoverableTimeout: 0x00000000
[CHG] Controller 28:16:AD:A1:8C:E4 Pairable: no
[CHG] Controller 28:16:AD:A1:8C:E4 UUIDs: 00001112-0000-1000-8000-00805f9b34fb
[CHG] Controller 28:16:AD:A1:8C:E4 UUIDs: 00001801-0000-1000-8000-00805f9b34fb
[CHG] Controller 28:16:AD:A1:8C:E4 UUIDs: 0000110e-0000-1000-8000-00805f9b34fb
[CHG] Controller 28:16:AD:A1:8C:E4 UUIDs: 00001106-0000-1000-8000-00805f9b34fb
[CHG] Controller 28:16:AD:A1:8C:E4 UUIDs: 00001800-0000-1000-8000-00805f9b34fb
[CHG] Controller 28:16:AD:A1:8C:E4 UUIDs: 00000f49-9100-4a18-be29-0d27fb00b1e5
[CHG] Controller 28:16:AD:A1:8C:E4 UUIDs: 00001105-0000-1000-8000-00805f9b34fb
[CHG] Controller 28:16:AD:A1:8C:E4 UUIDs: 00001200-0000-1000-8000-00805f9b34fb
[CHG] Controller 28:16:AD:A1:8C:E4 UUIDs: 0000110c-0000-1000-8000-00805f9b34fb
[CHG] Controller 28:16:AD:A1:8C:E4 UUIDs: 00001104-0000-1000-8000-00805f9b34fb
[CHG] Controller 28:16:AD:A1:8C:E4 UUIDs: 0000110b-0000-1000-8000-00805f9b34fb
[CHG] Controller 28:16:AD:A1:8C:E4 UUIDs: 0000110a-0000-1000-8000-00805f9b34fb
[CHG] Controller 28:16:AD:A1:8C:E4 UUIDs: 00005005-0000-1000-8000-0002ee000001
[CHG] Controller 28:16:AD:A1:8C:E4 UUIDs: 00000f49-9200-4a18-be29-0d27fb00b1e5
[CHG] Controller 28:16:AD:A1:8C:E4 UUIDs: 00001133-0000-1000-8000-00805f9b34fb
[CHG] Controller 28:16:AD:A1:8C:E4 UUIDs: 0000112f-0000-1000-8000-00805f9b34fb
[CHG] Controller 28:16:AD:A1:8C:E4 UUIDs: 00001132-0000-1000-8000-00805f9b34fb
[CHG] Controller 28:16:AD:A1:8C:E4 SupportedInstances: 0x03
[CHG] Controller 28:16:AD:A1:8C:E4 ActiveInstances: 0x02
[CHG] Controller 28:16:AD:A1:8C:E4 SupportedInstances: 0x03
[CHG] Controller 28:16:AD:A1:8C:E4 ActiveInstances: 0x02
[NEW] Device 6E:8B:61:1D:3C:0E 6E-8B-61-1D-3C-0E
[CHG] Device 6E:8B:61:1D:3C:0E Trusted: yes
[NEW] Primary Service
/org/bluez/hci0/dev_6E_8B_61_1D_3C_0E/service0001
00001801-0000-1000-8000-00805f9b34fb
Generic Attribute Profile
[NEW] Characteristic
/org/bluez/hci0/dev_6E_8B_61_1D_3C_0E/service0001/char0002
00002a05-0000-1000-8000-00805f9b34fb
Service Changed
[CHG] Device 6E:8B:61:1D:3C:0E UUIDs: 00001800-0000-1000-8000-00805f9b34fb
[CHG] Device 6E:8B:61:1D:3C:0E UUIDs: 00001801-0000-1000-8000-00805f9b34fb
[CHG] Device 6E:8B:61:1D:3C:0E ServicesResolved: yes
[CHG] Device 6E:8B:61:1D:3C:0E Name: Samsung Galaxy S7 edge
[CHG] Device 6E:8B:61:1D:3C:0E Alias: Samsung Galaxy S7 edge
[6E-8B-61-1D-3C-0E]# scan on
Discovery started
[CHG] Controller 28:16:AD:A1:8C:E4 Discovering: yes
[NEW] Device 88:6B:0F:4D:F8:8C KalibrierProduktion
[CHG] Device 88:6B:0F:4D:F8:8C Trusted: yes
[NEW] Device 7F:26:92:B3:8E:B1 7F-26-92-B3-8E-B1
[CHG] Device 7F:26:92:B3:8E:B1 Trusted: yes
[NEW] Device 88:6B:0F:94:C2:38 RC Panel BT
[CHG] Device 88:6B:0F:94:C2:38 Trusted: yes
[CHG] Device 7F:26:92:B3:8E:B1 RSSI: -74
[CHG] Device 7F:26:92:B3:8E:B1 AdvertisingFlags:
00 .
[NEW] Device 55:AF:6B:8B:31:AA 55-AF-6B-8B-31-AA
[CHG] Device 55:AF:6B:8B:31:AA Trusted: yes
[NEW] Device 48:82:F8:83:53:67 48-82-F8-83-53-67
[CHG] Device 48:82:F8:83:53:67 Trusted: yes
[NEW] Device 78:C4:0E:80:08:3D 78-C4-0E-80-08-3D
[CHG] Device 78:C4:0E:80:08:3D Trusted: yes
[6E-8B-61-1D-3C-0E]# scan off
[CHG] Device 78:C4:0E:80:08:3D RSSI is nil
[CHG] Device 48:82:F8:83:53:67 RSSI is nil
[CHG] Device 55:AF:6B:8B:31:AA RSSI is nil
[CHG] Device 88:6B:0F:94:C2:38 RSSI is nil
[CHG] Device 7F:26:92:B3:8E:B1 RSSI is nil
[CHG] Device 88:6B:0F:4D:F8:8C RSSI is nil
Discovery stopped
[CHG] Controller 28:16:AD:A1:8C:E4 Discovering: no
[6E-8B-61-1D-3C-0E]# connect 88:6B:0F:94:C2:38
Attempting to connect to 88:6B:0F:94:C2:38
[CHG] Controller 28:16:AD:A1:8C:E4 UUIDs: 00001112-0000-1000-8000-00805f9b34fb
[CHG] Controller 28:16:AD:A1:8C:E4 UUIDs: 00001801-0000-1000-8000-00805f9b34fb
[CHG] Controller 28:16:AD:A1:8C:E4 UUIDs: 0000110e-0000-1000-8000-00805f9b34fb
[CHG] Controller 28:16:AD:A1:8C:E4 UUIDs: 00001106-0000-1000-8000-00805f9b34fb
[CHG] Controller 28:16:AD:A1:8C:E4 UUIDs: 00001800-0000-1000-8000-00805f9b34fb
[CHG] Controller 28:16:AD:A1:8C:E4 UUIDs: 00001105-0000-1000-8000-00805f9b34fb
[CHG] Controller 28:16:AD:A1:8C:E4 UUIDs: 00001200-0000-1000-8000-00805f9b34fb
[CHG] Controller 28:16:AD:A1:8C:E4 UUIDs: 0000110c-0000-1000-8000-00805f9b34fb
[CHG] Controller 28:16:AD:A1:8C:E4 UUIDs: 00001104-0000-1000-8000-00805f9b34fb
[CHG] Controller 28:16:AD:A1:8C:E4 UUIDs: 0000110b-0000-1000-8000-00805f9b34fb
[CHG] Controller 28:16:AD:A1:8C:E4 UUIDs: 0000110a-0000-1000-8000-00805f9b34fb
[CHG] Controller 28:16:AD:A1:8C:E4 UUIDs: 00005005-0000-1000-8000-0002ee000001
[CHG] Controller 28:16:AD:A1:8C:E4 UUIDs: 00001133-0000-1000-8000-00805f9b34fb
[CHG] Controller 28:16:AD:A1:8C:E4 UUIDs: 0000112f-0000-1000-8000-00805f9b34fb
[CHG] Controller 28:16:AD:A1:8C:E4 UUIDs: 00001132-0000-1000-8000-00805f9b34fb
[CHG] Controller 28:16:AD:A1:8C:E4 SupportedInstances: 0x05
[CHG] Controller 28:16:AD:A1:8C:E4 ActiveInstances: 0x00
Failed to connect: org.bluez.Error.Failed
[6E-8B-61-1D-3C-0E]# connect 88:6B:0F:94:C2:38
Attempting to connect to 88:6B:0F:94:C2:38
Failed to connect: org.bluez.Error.Failed
[6E-8B-61-1D-3C-0E]# connect 88:6B:0F:94:C2:38
Attempting to connect to 88:6B:0F:94:C2:38
Failed to connect: org.bluez.Error.Failed
[DEL] Device 88:6B:0F:4D:F8:8C KalibrierProduktion
[DEL] Device 7F:26:92:B3:8E:B1 7F-26-92-B3-8E-B1
[DEL] Device 55:AF:6B:8B:31:AA 55-AF-6B-8B-31-AA
[DEL] Device 48:82:F8:83:53:67 48-82-F8-83-53-67
[DEL] Device 78:C4:0E:80:08:3D 78-C4-0E-80-08-3D
[CHG] Device 6E:8B:61:1D:3C:0E ServicesResolved: no
[CHG] Device 6E:8B:61:1D:3C:0E Connected: no
[DEL] Characteristic
/org/bluez/hci0/dev_6E_8B_61_1D_3C_0E/service0001/char0002
00002a05-0000-1000-8000-00805f9b34fb
Service Changed
[DEL] Primary Service
/org/bluez/hci0/dev_6E_8B_61_1D_3C_0E/service0001
00001801-0000-1000-8000-00805f9b34fb
Generic Attribute Profile
[DEL] Device 6E:8B:61:1D:3C:0E Samsung Galaxy S7 edge
[bluetooth]# connect 88:6B:0F:94:C2:38
Attempting to connect to 88:6B:0F:94:C2:38
[CHG] Device 88:6B:0F:94:C2:38 Connected: yes
Connection successful
[NEW] Primary Service
/org/bluez/hci0/dev_88_6B_0F_94_C2_38/service0006
5bea16fb-a785-49d5-a3e4-4c7412e72df1
Vendor specific
[NEW] Characteristic
/org/bluez/hci0/dev_88_6B_0F_94_C2_38/service0006/char0007
5bea16fb-a785-49d5-a3e4-4c7412e72df2
Vendor specific
[NEW] Characteristic
/org/bluez/hci0/dev_88_6B_0F_94_C2_38/service0006/char0009
5bea16fb-a785-49d5-a3e4-4c7412e72df3
Vendor specific
[NEW] Characteristic
/org/bluez/hci0/dev_88_6B_0F_94_C2_38/service0006/char000b
5bea16fb-a785-49d5-a3e4-4c7412e72df4
Vendor specific
[NEW] Characteristic
/org/bluez/hci0/dev_88_6B_0F_94_C2_38/service0006/char000d
5bea16fb-a785-49d5-a3e4-4c7412e72a29
Vendor specific
[NEW] Characteristic
/org/bluez/hci0/dev_88_6B_0F_94_C2_38/service0006/char000f
5bea16fb-a785-49d5-a3e4-4c7412e72a24
Vendor specific
[NEW] Characteristic
/org/bluez/hci0/dev_88_6B_0F_94_C2_38/service0006/char0011
5bea16fb-a785-49d5-a3e4-4c7412e72a25
Vendor specific
[NEW] Characteristic
/org/bluez/hci0/dev_88_6B_0F_94_C2_38/service0006/char0013
5bea16fb-a785-49d5-a3e4-4c7412e72a26
Vendor specific
[NEW] Characteristic
/org/bluez/hci0/dev_88_6B_0F_94_C2_38/service0006/char0015
5bea16fb-a785-49d5-a3e4-4c7412e72a27
Vendor specific
[NEW] Characteristic
/org/bluez/hci0/dev_88_6B_0F_94_C2_38/service0006/char0017
5bea16fb-a785-49d5-a3e4-4c7412e72a28
Vendor specific
[NEW] Characteristic
/org/bluez/hci0/dev_88_6B_0F_94_C2_38/service0006/char0019
5bea16fb-a785-49d5-a3e4-4c7412e72a19
Vendor specific
[NEW] Descriptor
/org/bluez/hci0/dev_88_6B_0F_94_C2_38/service0006/char0019/desc001b
00002902-0000-1000-8000-00805f9b34fb
Client Characteristic Configuration
[NEW] Primary Service
/org/bluez/hci0/dev_88_6B_0F_94_C2_38/service001c
6d480f49-91d3-4a18-be29-0d27fb00b1e5
Vendor specific
[NEW] Characteristic
/org/bluez/hci0/dev_88_6B_0F_94_C2_38/service001c/char001d
11c3876c-9bda-42cc-a30b-1be83c8059d2
Vendor specific
[NEW] Descriptor
/org/bluez/hci0/dev_88_6B_0F_94_C2_38/service001c/char001d/desc001f
00002902-0000-1000-8000-00805f9b34fb
Client Characteristic Configuration
[NEW] Characteristic
/org/bluez/hci0/dev_88_6B_0F_94_C2_38/service001c/char0020
11c3876c-9bda-42cc-a30b-1be83c8059d3
Vendor specific
[NEW] Descriptor
/org/bluez/hci0/dev_88_6B_0F_94_C2_38/service001c/char0020/desc0022
00002902-0000-1000-8000-00805f9b34fb
Client Characteristic Configuration
[NEW] Characteristic
/org/bluez/hci0/dev_88_6B_0F_94_C2_38/service001c/char0023
11c3876c-9bda-42cc-a30b-1be83c8059d4
Vendor specific
[NEW] Descriptor
/org/bluez/hci0/dev_88_6B_0F_94_C2_38/service001c/char0023/desc0025
00002902-0000-1000-8000-00805f9b34fb
Client Characteristic Configuration
[NEW] Primary Service
/org/bluez/hci0/dev_88_6B_0F_94_C2_38/service0026
1d14d6ee-fd63-4fa1-bfa4-8f47b42119f0
Vendor specific
[NEW] Characteristic
/org/bluez/hci0/dev_88_6B_0F_94_C2_38/service0026/char0027
f7bf3564-fb6d-4e53-88a4-5e37e0326063
Vendor specific
[NEW] Characteristic
/org/bluez/hci0/dev_88_6B_0F_94_C2_38/service0026/char0029
984227f3-34fc-4045-a5d0-2c581f81a153
Vendor specific
[NEW] Primary Service
/org/bluez/hci0/dev_88_6B_0F_94_C2_38/service002b
1d14d6ee-fd63-4fa1-bfa4-8f47b42119f1
Vendor specific
[NEW] Characteristic
/org/bluez/hci0/dev_88_6B_0F_94_C2_38/service002b/char002c
f7bf3564-fb6d-4e53-88a4-5e37e0326064
Vendor specific
[NEW] Characteristic
/org/bluez/hci0/dev_88_6B_0F_94_C2_38/service002b/char002e
984227f3-34fc-4045-a5d0-2c581f81a154
Vendor specific
[CHG] Device 88:6B:0F:94:C2:38 UUIDs: 00001800-0000-1000-8000-00805f9b34fb
[CHG] Device 88:6B:0F:94:C2:38 UUIDs: 1d14d6ee-fd63-4fa1-bfa4-8f47b42119f0
[CHG] Device 88:6B:0F:94:C2:38 UUIDs: 1d14d6ee-fd63-4fa1-bfa4-8f47b42119f1
[CHG] Device 88:6B:0F:94:C2:38 UUIDs: 5bea16fb-a785-49d5-a3e4-4c7412e72df1
[CHG] Device 88:6B:0F:94:C2:38 UUIDs: 6d480f49-91d3-4a18-be29-0d27fb00b1e5
[CHG] Device 88:6B:0F:94:C2:38 ServicesResolved: yes
[CHG] Device 88:6B:0F:94:C2:38 Appearance: 0x0180
[RC Panel BT]# disconnect
Attempting to disconnect from 88:6B:0F:94:C2:38
[CHG] Device 88:6B:0F:94:C2:38 ServicesResolved: no
Successful disconnected
[CHG] Device 88:6B:0F:94:C2:38 Connected: no
[bluetooth]# exit
[-- Attachment #3: btmon.log --]
[-- Type: application/octet-stream, Size: 9052 bytes --]
HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 #182 [hci0] 42.633052
Type: Passive (0x00)
Interval: 60.000 msec (0x0060)
Window: 30.000 msec (0x0030)
Own address type: Public (0x00)
Filter policy: Ignore not in white list (0x01)
> HCI Event: Command Complete (0x0e) plen 4 #183 [hci0] 42.634057
LE Set Scan Parameters (0x08|0x000b) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #184 [hci0] 42.634137
Scanning: Enabled (0x01)
Filter duplicates: Enabled (0x01)
> HCI Event: Command Complete (0x0e) plen 4 #185 [hci0] 42.635063
LE Set Scan Enable (0x08|0x000c) ncmd 2
Status: Success (0x00)
> HCI Event: LE Meta Event (0x3e) plen 33 #186 [hci0] 43.062955
LE Advertising Report (0x02)
Num reports: 1
Event type: Connectable undirected - ADV_IND (0x00)
Address type: Public (0x00)
Address: 88:6B:0F:94:C2:38 (Bluegiga Technologies OY)
Data length: 21
Flags: 0x06
LE General Discoverable Mode
BR/EDR Not Supported
128-bit Service UUIDs (partial): 1 entry
Vendor specific (6d480f49-91d3-4a18-be29-0d27fb00b1e5)
RSSI: -62 dBm (0xc2)
< HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #187 [hci0] 84.461373
Scanning: Disabled (0x00)
Filter duplicates: Disabled (0x00)
> HCI Event: Command Complete (0x0e) plen 4 #188 [hci0] 84.462878
LE Set Scan Enable (0x08|0x000c) ncmd 2
Status: Success (0x00)
> HCI Event: Disconnect Complete (0x05) plen 4 #189 [hci0] 90.966847
Status: Success (0x00)
Handle: 3585
Reason: Remote User Terminated Connection (0x13)
@ MGMT Event: Device Disconnected (0x000c) plen 8 {0x0004} [hci0] 90.966908
LE Address: 72:D6:27:F0:FB:A3 (Resolvable)
Reason: Connection terminated by remote host (0x03)
@ MGMT Event: Device Disconnected (0x000c) plen 8 {0x0003} [hci0] 90.966908
LE Address: 72:D6:27:F0:FB:A3 (Resolvable)
Reason: Connection terminated by remote host (0x03)
@ MGMT Event: Device Disconnected (0x000c) plen 8 {0x0002} [hci0] 90.966908
LE Address: 72:D6:27:F0:FB:A3 (Resolvable)
Reason: Connection terminated by remote host (0x03)
@ MGMT Event: Device Disconnected (0x000c) plen 8 {0x0001} [hci0] 90.966908
LE Address: 72:D6:27:F0:FB:A3 (Resolvable)
Reason: Connection terminated by remote host (0x03)
< HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 #190 [hci0] 98.088842
Type: Passive (0x00)
Interval: 60.000 msec (0x0060)
Window: 30.000 msec (0x0030)
Own address type: Public (0x00)
Filter policy: Ignore not in white list (0x01)
> HCI Event: Command Complete (0x0e) plen 4 #191 [hci0] 98.089843
LE Set Scan Parameters (0x08|0x000b) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #192 [hci0] 98.089898
Scanning: Enabled (0x01)
Filter duplicates: Enabled (0x01)
> HCI Event: Command Complete (0x0e) plen 4 #193 [hci0] 98.090844
LE Set Scan Enable (0x08|0x000c) ncmd 2
Status: Success (0x00)
> HCI Event: LE Meta Event (0x3e) plen 33 #194 [hci0] 98.824017
LE Advertising Report (0x02)
Num reports: 1
Event type: Connectable undirected - ADV_IND (0x00)
Address type: Public (0x00)
Address: 88:6B:0F:94:C2:38 (Bluegiga Technologies OY)
Data length: 21
Flags: 0x06
LE General Discoverable Mode
BR/EDR Not Supported
128-bit Service UUIDs (partial): 1 entry
Vendor specific (6d480f49-91d3-4a18-be29-0d27fb00b1e5)
RSSI: -71 dBm (0xb9)
< HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #195 [hci0] 98.824101
Scanning: Disabled (0x00)
Filter duplicates: Disabled (0x00)
> HCI Event: Command Complete (0x0e) plen 4 #196 [hci0] 98.827834
LE Set Scan Enable (0x08|0x000c) ncmd 2
Status: Success (0x00)
< HCI Command: LE Create Connection (0x08|0x000d) plen 25 #197 [hci0] 98.827924
Scan interval: 60.000 msec (0x0060)
Scan window: 60.000 msec (0x0060)
Filter policy: White list is not used (0x00)
Peer address type: Public (0x00)
Peer address: 88:6B:0F:94:C2:38 (Bluegiga Technologies OY)
Own address type: Public (0x00)
Min connection interval: 30.00 msec (0x0018)
Max connection interval: 50.00 msec (0x0028)
Connection latency: 0 (0x0000)
Supervision timeout: 420 msec (0x002a)
Min connection length: 0.000 msec (0x0000)
Max connection length: 0.000 msec (0x0000)
> HCI Event: Command Status (0x0f) plen 4 #198 [hci0] 98.829788
LE Create Connection (0x08|0x000d) ncmd 2
Status: Success (0x00)
> HCI Event: LE Meta Event (0x3e) plen 19 #199 [hci0] 100.334843
LE Connection Complete (0x01)
Status: Success (0x00)
Handle: 3585
Role: Master (0x00)
Peer address type: Public (0x00)
Peer address: 88:6B:0F:94:C2:38 (Bluegiga Technologies OY)
Connection interval: 48.75 msec (0x0027)
Connection latency: 0 (0x0000)
Supervision timeout: 420 msec (0x002a)
Master clock accuracy: 0x00
next prev parent reply other threads:[~2018-10-12 11:15 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-11 7:13 Bluetooth: Is it possible to operate Bluez concurrent in central and peripheral role? Eisenkolb Thomas
2018-10-11 16:49 ` Luiz Augusto von Dentz
[not found] ` <bed1213e3c6d4d3abe06be95ef9aba79@fronius.com>
2018-10-12 8:20 ` Luiz Augusto von Dentz
2018-10-12 10:07 ` AW: " Eisenkolb Thomas
2018-10-12 11:15 ` Eisenkolb Thomas [this message]
2018-10-12 11:37 ` Luiz Augusto von Dentz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1a98ed47a70446f08fea529bcd85eafc@fronius.com \
--to=eisenkolb.thomas@fronius.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=luiz.dentz@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).