* [PATCH RESEND v2 1/3] Bluetooth: Add quirk for reading BD_ADDR from fwnode property
2018-12-04 20:16 [PATCH RESEND v2 0/3] Add quirk for reading BD_ADDR from fwnode property Matthias Kaehlcke
@ 2018-12-04 20:16 ` Matthias Kaehlcke
[not found] ` <5F86A55E-2893-4D16-BA5C-36A60CB46DBC@holtmann.org>
2018-12-04 20:16 ` [PATCH RESEND v2 2/3] Bluetooth: btqcomsmd: use HCI_QUIRK_USE_BDADDR_PROPERTY Matthias Kaehlcke
2018-12-04 20:16 ` [PATCH RESEND v2 3/3] Bluetooth: hci_qca: Set HCI_QUIRK_USE_BDADDR_PROPERTY for wcn3990 Matthias Kaehlcke
2 siblings, 1 reply; 5+ messages in thread
From: Matthias Kaehlcke @ 2018-12-04 20:16 UTC (permalink / raw)
To: Marcel Holtmann, Johan Hedberg, David S . Miller, Loic Poulain
Cc: linux-bluetooth, netdev, linux-kernel, Balakrishna Godavarthi,
Brian Norris, Dmitry Grinberg, Matthias Kaehlcke
Add HCI_QUIRK_USE_BDADDR_PROPERTY to allow controllers to retrieve
the public Bluetooth address from the firmware node property
'local-bd-address'. If quirk is set and the property does not exist
or is invalid the controller is marked as unconfigured.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
Tested-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
---
Changes in v2:
- added check for return value of ->setup()
- only read BD_ADDR from the property if it isn't assigned yet. This
is needed to support configuration from user space
- refactored the branch of the new quirk to get rid of 'bd_addr_set'
- added 'Reviewed-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>' tag
---
include/net/bluetooth/hci.h | 12 ++++++++++
net/bluetooth/hci_core.c | 45 +++++++++++++++++++++++++++++++++++++
net/bluetooth/mgmt.c | 6 +++--
3 files changed, 61 insertions(+), 2 deletions(-)
diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index c36dc1e20556a..fbba43e9bef5b 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -158,6 +158,18 @@ enum {
*/
HCI_QUIRK_INVALID_BDADDR,
+ /* When this quirk is set, the public Bluetooth address
+ * initially reported by HCI Read BD Address command
+ * is considered invalid. The public BD Address can be
+ * specified in the fwnode property 'local-bd-address'.
+ * If this property does not exist or is invalid controller
+ * configuration is required before this device can be used.
+ *
+ * This quirk can be set before hci_register_dev is called or
+ * during the hdev->setup vendor callback.
+ */
+ HCI_QUIRK_USE_BDADDR_PROPERTY,
+
/* When this quirk is set, the duplicate filtering during
* scanning is based on Bluetooth devices addresses. To allow
* RSSI based updates, restart scanning if needed.
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 7352fe85674be..d4149005a661e 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -30,6 +30,7 @@
#include <linux/rfkill.h>
#include <linux/debugfs.h>
#include <linux/crypto.h>
+#include <linux/property.h>
#include <asm/unaligned.h>
#include <net/bluetooth/bluetooth.h>
@@ -1355,6 +1356,36 @@ int hci_inquiry(void __user *arg)
return err;
}
+/**
+ * hci_dev_get_bd_addr_from_property - Get the Bluetooth Device Address
+ * (BD_ADDR) for a HCI device from
+ * a firmware node property.
+ * @hdev: The HCI device
+ *
+ * Search the firmware node for 'local-bd-address'.
+ *
+ * All-zero BD addresses are rejected, because those could be properties
+ * that exist in the firmware tables, but were not updated by the firmware. For
+ * example, the DTS could define 'local-bd-address', with zero BD addresses.
+ */
+static int hci_dev_get_bd_addr_from_property(struct hci_dev *hdev)
+{
+ struct fwnode_handle *fwnode = dev_fwnode(hdev->dev.parent);
+ bdaddr_t ba;
+ int ret;
+
+ ret = fwnode_property_read_u8_array(fwnode, "local-bd-address",
+ (u8 *)&ba, sizeof(ba));
+ if (ret < 0)
+ return ret;
+ if (!bacmp(&ba, BDADDR_ANY))
+ return -ENODATA;
+
+ hdev->public_addr = ba;
+
+ return 0;
+}
+
static int hci_dev_do_open(struct hci_dev *hdev)
{
int ret = 0;
@@ -1422,6 +1453,20 @@ static int hci_dev_do_open(struct hci_dev *hdev)
if (hdev->setup)
ret = hdev->setup(hdev);
+ if (ret)
+ goto setup_failed;
+
+ if (test_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks)) {
+ if (!bacmp(&hdev->public_addr, BDADDR_ANY))
+ hci_dev_get_bd_addr_from_property(hdev);
+
+ if (!bacmp(&hdev->public_addr, BDADDR_ANY) ||
+ !hdev->set_bdaddr ||
+ hdev->set_bdaddr(hdev, &hdev->public_addr))
+ hci_dev_set_flag(hdev, HCI_UNCONFIGURED);
+ }
+
+setup_failed:
/* The transport driver can set these quirks before
* creating the HCI device or in its setup callback.
*
diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
index ccce954f81468..fae84353d030f 100644
--- a/net/bluetooth/mgmt.c
+++ b/net/bluetooth/mgmt.c
@@ -551,7 +551,8 @@ static bool is_configured(struct hci_dev *hdev)
!hci_dev_test_flag(hdev, HCI_EXT_CONFIGURED))
return false;
- if (test_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks) &&
+ if ((test_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks) ||
+ test_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks)) &&
!bacmp(&hdev->public_addr, BDADDR_ANY))
return false;
@@ -566,7 +567,8 @@ static __le32 get_missing_options(struct hci_dev *hdev)
!hci_dev_test_flag(hdev, HCI_EXT_CONFIGURED))
options |= MGMT_OPTION_EXTERNAL_CONFIG;
- if (test_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks) &&
+ if ((test_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks) ||
+ test_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks)) &&
!bacmp(&hdev->public_addr, BDADDR_ANY))
options |= MGMT_OPTION_PUBLIC_ADDRESS;
--
2.20.0.rc1.387.gf8505762e3-goog
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH RESEND v2 2/3] Bluetooth: btqcomsmd: use HCI_QUIRK_USE_BDADDR_PROPERTY
2018-12-04 20:16 [PATCH RESEND v2 0/3] Add quirk for reading BD_ADDR from fwnode property Matthias Kaehlcke
2018-12-04 20:16 ` [PATCH RESEND v2 1/3] Bluetooth: " Matthias Kaehlcke
@ 2018-12-04 20:16 ` Matthias Kaehlcke
2018-12-04 20:16 ` [PATCH RESEND v2 3/3] Bluetooth: hci_qca: Set HCI_QUIRK_USE_BDADDR_PROPERTY for wcn3990 Matthias Kaehlcke
2 siblings, 0 replies; 5+ messages in thread
From: Matthias Kaehlcke @ 2018-12-04 20:16 UTC (permalink / raw)
To: Marcel Holtmann, Johan Hedberg, David S . Miller, Loic Poulain
Cc: linux-bluetooth, netdev, linux-kernel, Balakrishna Godavarthi,
Brian Norris, Dmitry Grinberg, Matthias Kaehlcke
Use the HCI_QUIRK_USE_BDADDR_PROPERTY quirk to let the HCI
core handle the reading of 'local-bd-address'. With this there
is no need to set HCI_QUIRK_INVALID_BDADDR, the case of a
non-existing or invalid fwnode property is handled by the core
code.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
---
I couldn't actually test the changes in this driver since I
don't have a device with this controller. Could someone
from Qualcomm help with this?
Changes in v2:
- removed now unused field 'bdaddr' from struct btqcomsmd
- added 'Reviewed-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>' tag
---
drivers/bluetooth/btqcomsmd.c | 29 +++--------------------------
1 file changed, 3 insertions(+), 26 deletions(-)
diff --git a/drivers/bluetooth/btqcomsmd.c b/drivers/bluetooth/btqcomsmd.c
index 7df3eed1ef5e9..b3020fab6c8e3 100644
--- a/drivers/bluetooth/btqcomsmd.c
+++ b/drivers/bluetooth/btqcomsmd.c
@@ -28,7 +28,6 @@
struct btqcomsmd {
struct hci_dev *hdev;
- bdaddr_t bdaddr;
struct rpmsg_endpoint *acl_channel;
struct rpmsg_endpoint *cmd_channel;
};
@@ -125,23 +124,10 @@ static int btqcomsmd_setup(struct hci_dev *hdev)
return PTR_ERR(skb);
kfree_skb(skb);
- /* Devices do not have persistent storage for BD address. If no
- * BD address has been retrieved during probe, mark the device
- * as having an invalid BD address.
+ /* Devices do not have persistent storage for BD address. Retrieve
+ * it from the firmware node property.
*/
- if (!bacmp(&btq->bdaddr, BDADDR_ANY)) {
- set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
- return 0;
- }
-
- /* When setting a configured BD address fails, mark the device
- * as having an invalid BD address.
- */
- err = qca_set_bdaddr_rome(hdev, &btq->bdaddr);
- if (err) {
- set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
- return 0;
- }
+ set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
return 0;
}
@@ -169,15 +155,6 @@ static int btqcomsmd_probe(struct platform_device *pdev)
if (IS_ERR(btq->cmd_channel))
return PTR_ERR(btq->cmd_channel);
- /* The local-bd-address property is usually injected by the
- * bootloader which has access to the allocated BD address.
- */
- if (!of_property_read_u8_array(pdev->dev.of_node, "local-bd-address",
- (u8 *)&btq->bdaddr, sizeof(bdaddr_t))) {
- dev_info(&pdev->dev, "BD address %pMR retrieved from device-tree",
- &btq->bdaddr);
- }
-
hdev = hci_alloc_dev();
if (!hdev)
return -ENOMEM;
--
2.20.0.rc1.387.gf8505762e3-goog
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH RESEND v2 3/3] Bluetooth: hci_qca: Set HCI_QUIRK_USE_BDADDR_PROPERTY for wcn3990
2018-12-04 20:16 [PATCH RESEND v2 0/3] Add quirk for reading BD_ADDR from fwnode property Matthias Kaehlcke
2018-12-04 20:16 ` [PATCH RESEND v2 1/3] Bluetooth: " Matthias Kaehlcke
2018-12-04 20:16 ` [PATCH RESEND v2 2/3] Bluetooth: btqcomsmd: use HCI_QUIRK_USE_BDADDR_PROPERTY Matthias Kaehlcke
@ 2018-12-04 20:16 ` Matthias Kaehlcke
2 siblings, 0 replies; 5+ messages in thread
From: Matthias Kaehlcke @ 2018-12-04 20:16 UTC (permalink / raw)
To: Marcel Holtmann, Johan Hedberg, David S . Miller, Loic Poulain
Cc: linux-bluetooth, netdev, linux-kernel, Balakrishna Godavarthi,
Brian Norris, Dmitry Grinberg, Matthias Kaehlcke
Set quirk for wcn3990 to read BD_ADDR from a firmware node property.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
---
Changes in v2:
- patch added to the series
tested with https://lore.kernel.org/patchwork/patch/1003830
("Bluetooth: hci_qca: Add helper to set device address.")
---
drivers/bluetooth/hci_qca.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index f036c8f98ea33..0535833caa52c 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -1193,6 +1193,7 @@ static int qca_setup(struct hci_uart *hu)
* setup for every hci up.
*/
set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);
+ set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
hu->hdev->shutdown = qca_power_off;
ret = qca_wcn3990_init(hu);
if (ret)
--
2.20.0.rc1.387.gf8505762e3-goog
^ permalink raw reply related [flat|nested] 5+ messages in thread