* [PATCH Bluez] tools/mesh-cfgclient: add unbind command
@ 2019-11-11 0:24 Aurelien Jarno
2019-11-11 18:26 ` Stotland, Inga
2019-11-12 17:55 ` Gix, Brian
0 siblings, 2 replies; 4+ messages in thread
From: Aurelien Jarno @ 2019-11-11 0:24 UTC (permalink / raw)
To: linux-bluetooth; +Cc: Aurelien Jarno
This is basically a copy of cmd_bind with OP_MODEL_APP_BIND replaced by
OP_MODEL_APP_UNBIND as cmds[] already has code to handle it.
---
tools/mesh/cfgcli.c | 36 ++++++++++++++++++++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/tools/mesh/cfgcli.c b/tools/mesh/cfgcli.c
index 086998910..a4de42943 100644
--- a/tools/mesh/cfgcli.c
+++ b/tools/mesh/cfgcli.c
@@ -897,6 +897,40 @@ static void cmd_bind(int argc, char *argv[])
return bt_shell_noninteractive_quit(EXIT_SUCCESS);
}
+static void cmd_unbind(int argc, char *argv[])
+{
+ uint16_t n;
+ uint8_t msg[32];
+ int parm_cnt;
+
+ parm_cnt = read_input_parameters(argc, argv);
+ if (parm_cnt != 3 && parm_cnt != 4) {
+ bt_shell_printf("Bad arguments\n");
+ return bt_shell_noninteractive_quit(EXIT_FAILURE);
+ }
+
+ n = mesh_opcode_set(OP_MODEL_APP_UNBIND, msg);
+
+ put_le16(parms[0], msg + n);
+ n += 2;
+ put_le16(parms[1], msg + n);
+ n += 2;
+
+ if (parm_cnt == 4) {
+ put_le16(parms[3], msg + n);
+ put_le16(parms[2], msg + n + 2);
+ n += 4;
+ } else {
+ put_le16(parms[2], msg + n);
+ n += 2;
+ }
+
+ if (!config_send(msg, n, OP_MODEL_APP_UNBIND))
+ return bt_shell_noninteractive_quit(EXIT_FAILURE);
+
+ return bt_shell_noninteractive_quit(EXIT_SUCCESS);
+}
+
static void cmd_beacon_set(int argc, char *argv[])
{
uint16_t n;
@@ -1335,6 +1369,8 @@ static const struct bt_shell_menu cfg_menu = {
"Delete application key"},
{"bind", "<ele_addr> <app_idx> <mod_id> [vendor_id]", cmd_bind,
"Bind app key to a model"},
+ {"unbind", "<ele_addr> <app_idx> <mod_id> [vendor_id]", cmd_unbind,
+ "Remove app key from a model"},
{"mod-appidx-get", "<ele_addr> <model id>", cmd_mod_appidx_get,
"Get model app_idx"},
{"ttl-set", "<ttl>", cmd_ttl_set,
--
2.24.0
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: [PATCH Bluez] tools/mesh-cfgclient: add unbind command
2019-11-11 0:24 [PATCH Bluez] tools/mesh-cfgclient: add unbind command Aurelien Jarno
@ 2019-11-11 18:26 ` Stotland, Inga
2019-11-12 17:55 ` Gix, Brian
1 sibling, 0 replies; 4+ messages in thread
From: Stotland, Inga @ 2019-11-11 18:26 UTC (permalink / raw)
To: aurelien, linux-bluetooth
Hi Aurelien,
On Mon, 2019-11-11 at 01:24 +0100, Aurelien Jarno wrote:
> This is basically a copy of cmd_bind with OP_MODEL_APP_BIND replaced by
> OP_MODEL_APP_UNBIND as cmds[] already has code to handle it.
> ---
> tools/mesh/cfgcli.c | 36 ++++++++++++++++++++++++++++++++++++
> 1 file changed, 36 insertions(+)
>
> diff --git a/tools/mesh/cfgcli.c b/tools/mesh/cfgcli.c
> index 086998910..a4de42943 100644
> --- a/tools/mesh/cfgcli.c
> +++ b/tools/mesh/cfgcli.c
> @@ -897,6 +897,40 @@ static void cmd_bind(int argc, char *argv[])
> return bt_shell_noninteractive_quit(EXIT_SUCCESS);
> }
>
> +static void cmd_unbind(int argc, char *argv[])
> +{
> + uint16_t n;
> + uint8_t msg[32];
> + int parm_cnt;
> +
> + parm_cnt = read_input_parameters(argc, argv);
> + if (parm_cnt != 3 && parm_cnt != 4) {
> + bt_shell_printf("Bad arguments\n");
> + return bt_shell_noninteractive_quit(EXIT_FAILURE);
> + }
> +
> + n = mesh_opcode_set(OP_MODEL_APP_UNBIND, msg);
> +
> + put_le16(parms[0], msg + n);
> + n += 2;
> + put_le16(parms[1], msg + n);
> + n += 2;
> +
> + if (parm_cnt == 4) {
> + put_le16(parms[3], msg + n);
> + put_le16(parms[2], msg + n + 2);
> + n += 4;
> + } else {
> + put_le16(parms[2], msg + n);
> + n += 2;
> + }
> +
> + if (!config_send(msg, n, OP_MODEL_APP_UNBIND))
> + return bt_shell_noninteractive_quit(EXIT_FAILURE);
> +
> + return bt_shell_noninteractive_quit(EXIT_SUCCESS);
> +}
Since cmd_bind() & and cmd_unbind()
are virtually identical with the exception of the opcode, let's combine
them to call one routine, e.g.
cmd_add_binding() and cmd delete_binding() would call
cmd_bind(int argc, char*argv[], int opcode)
> +
> static void cmd_beacon_set(int argc, char *argv[])
> {
> uint16_t n;
> @@ -1335,6 +1369,8 @@ static const struct bt_shell_menu cfg_menu = {
> "Delete application key"},
> {"bind", "<ele_addr> <app_idx> <mod_id> [vendor_id]", cmd_bind,
> "Bind app key to a model"},
> + {"unbind", "<ele_addr> <app_idx> <mod_id> [vendor_id]", cmd_unbind,
> + "Remove app key from a model"},
> {"mod-appidx-get", "<ele_addr> <model id>", cmd_mod_appidx_get,
> "Get model app_idx"},
> {"ttl-set", "<ttl>", cmd_ttl_set,
Best regards,
Inga
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH Bluez] tools/mesh-cfgclient: add unbind command
2019-11-11 0:24 [PATCH Bluez] tools/mesh-cfgclient: add unbind command Aurelien Jarno
2019-11-11 18:26 ` Stotland, Inga
@ 2019-11-12 17:55 ` Gix, Brian
2019-11-12 18:02 ` Gix, Brian
1 sibling, 1 reply; 4+ messages in thread
From: Gix, Brian @ 2019-11-12 17:55 UTC (permalink / raw)
To: aurelien, linux-bluetooth
Applied, Thanks
On Mon, 2019-11-11 at 01:24 +0100, Aurelien Jarno wrote:
> This is basically a copy of cmd_bind with OP_MODEL_APP_BIND replaced by
> OP_MODEL_APP_UNBIND as cmds[] already has code to handle it.
> ---
> tools/mesh/cfgcli.c | 36 ++++++++++++++++++++++++++++++++++++
> 1 file changed, 36 insertions(+)
>
> diff --git a/tools/mesh/cfgcli.c b/tools/mesh/cfgcli.c
> index 086998910..a4de42943 100644
> --- a/tools/mesh/cfgcli.c
> +++ b/tools/mesh/cfgcli.c
> @@ -897,6 +897,40 @@ static void cmd_bind(int argc, char *argv[])
> return bt_shell_noninteractive_quit(EXIT_SUCCESS);
> }
>
> +static void cmd_unbind(int argc, char *argv[])
> +{
> + uint16_t n;
> + uint8_t msg[32];
> + int parm_cnt;
> +
> + parm_cnt = read_input_parameters(argc, argv);
> + if (parm_cnt != 3 && parm_cnt != 4) {
> + bt_shell_printf("Bad arguments\n");
> + return bt_shell_noninteractive_quit(EXIT_FAILURE);
> + }
> +
> + n = mesh_opcode_set(OP_MODEL_APP_UNBIND, msg);
> +
> + put_le16(parms[0], msg + n);
> + n += 2;
> + put_le16(parms[1], msg + n);
> + n += 2;
> +
> + if (parm_cnt == 4) {
> + put_le16(parms[3], msg + n);
> + put_le16(parms[2], msg + n + 2);
> + n += 4;
> + } else {
> + put_le16(parms[2], msg + n);
> + n += 2;
> + }
> +
> + if (!config_send(msg, n, OP_MODEL_APP_UNBIND))
> + return bt_shell_noninteractive_quit(EXIT_FAILURE);
> +
> + return bt_shell_noninteractive_quit(EXIT_SUCCESS);
> +}
> +
> static void cmd_beacon_set(int argc, char *argv[])
> {
> uint16_t n;
> @@ -1335,6 +1369,8 @@ static const struct bt_shell_menu cfg_menu = {
> "Delete application key"},
> {"bind", "<ele_addr> <app_idx> <mod_id> [vendor_id]", cmd_bind,
> "Bind app key to a model"},
> + {"unbind", "<ele_addr> <app_idx> <mod_id> [vendor_id]", cmd_unbind,
> + "Remove app key from a model"},
> {"mod-appidx-get", "<ele_addr> <model id>", cmd_mod_appidx_get,
> "Get model app_idx"},
> {"ttl-set", "<ttl>", cmd_ttl_set,
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH Bluez] tools/mesh-cfgclient: add unbind command
2019-11-12 17:55 ` Gix, Brian
@ 2019-11-12 18:02 ` Gix, Brian
0 siblings, 0 replies; 4+ messages in thread
From: Gix, Brian @ 2019-11-12 18:02 UTC (permalink / raw)
To: aurelien, linux-bluetooth
Actually applied v2 of this patch
On Tue, 2019-11-12 at 17:55 +0000, Gix, Brian wrote:
> Applied, Thanks
>
> On Mon, 2019-11-11 at 01:24 +0100, Aurelien Jarno wrote:
> > This is basically a copy of cmd_bind with OP_MODEL_APP_BIND replaced by
> > OP_MODEL_APP_UNBIND as cmds[] already has code to handle it.
> > ---
> > tools/mesh/cfgcli.c | 36 ++++++++++++++++++++++++++++++++++++
> > 1 file changed, 36 insertions(+)
> >
> > diff --git a/tools/mesh/cfgcli.c b/tools/mesh/cfgcli.c
> > index 086998910..a4de42943 100644
> > --- a/tools/mesh/cfgcli.c
> > +++ b/tools/mesh/cfgcli.c
> > @@ -897,6 +897,40 @@ static void cmd_bind(int argc, char *argv[])
> > return bt_shell_noninteractive_quit(EXIT_SUCCESS);
> > }
> >
> > +static void cmd_unbind(int argc, char *argv[])
> > +{
> > + uint16_t n;
> > + uint8_t msg[32];
> > + int parm_cnt;
> > +
> > + parm_cnt = read_input_parameters(argc, argv);
> > + if (parm_cnt != 3 && parm_cnt != 4) {
> > + bt_shell_printf("Bad arguments\n");
> > + return bt_shell_noninteractive_quit(EXIT_FAILURE);
> > + }
> > +
> > + n = mesh_opcode_set(OP_MODEL_APP_UNBIND, msg);
> > +
> > + put_le16(parms[0], msg + n);
> > + n += 2;
> > + put_le16(parms[1], msg + n);
> > + n += 2;
> > +
> > + if (parm_cnt == 4) {
> > + put_le16(parms[3], msg + n);
> > + put_le16(parms[2], msg + n + 2);
> > + n += 4;
> > + } else {
> > + put_le16(parms[2], msg + n);
> > + n += 2;
> > + }
> > +
> > + if (!config_send(msg, n, OP_MODEL_APP_UNBIND))
> > + return bt_shell_noninteractive_quit(EXIT_FAILURE);
> > +
> > + return bt_shell_noninteractive_quit(EXIT_SUCCESS);
> > +}
> > +
> > static void cmd_beacon_set(int argc, char *argv[])
> > {
> > uint16_t n;
> > @@ -1335,6 +1369,8 @@ static const struct bt_shell_menu cfg_menu = {
> > "Delete application key"},
> > {"bind", "<ele_addr> <app_idx> <mod_id> [vendor_id]", cmd_bind,
> > "Bind app key to a model"},
> > + {"unbind", "<ele_addr> <app_idx> <mod_id> [vendor_id]", cmd_unbind,
> > + "Remove app key from a model"},
> > {"mod-appidx-get", "<ele_addr> <model id>", cmd_mod_appidx_get,
> > "Get model app_idx"},
> > {"ttl-set", "<ttl>", cmd_ttl_set,
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-11-12 18:02 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-11 0:24 [PATCH Bluez] tools/mesh-cfgclient: add unbind command Aurelien Jarno
2019-11-11 18:26 ` Stotland, Inga
2019-11-12 17:55 ` Gix, Brian
2019-11-12 18:02 ` Gix, Brian
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).