Linux-Bluetooth Archive on
 help / color / Atom feed
From: Guillaume La Roque <>
Subject: [PATCH] bluetooth: hci_bcm: enable IRQ capability from node
Date: Wed,  4 Dec 2019 08:16:51 +0100
Message-ID: <> (raw)

Actually IRQ can be found from GPIO but all platorms don't support
gpiod_to_irq, it's the case on amlogic chip.
so to have possibility to use interrupt mode we need to add interrupts
field in node and support it in driver.

Signed-off-by: Guillaume La Roque <>
 drivers/bluetooth/hci_bcm.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c
index 7646636f2d18..9b024e1e36e2 100644
--- a/drivers/bluetooth/hci_bcm.c
+++ b/drivers/bluetooth/hci_bcm.c
@@ -1372,6 +1372,7 @@ static struct platform_driver bcm_driver = {
 static int bcm_serdev_probe(struct serdev_device *serdev)
 	struct bcm_device *bcmdev;
+	struct platform_device *pdev;
 	int err;
 	bcmdev = devm_kzalloc(&serdev->dev, sizeof(*bcmdev), GFP_KERNEL);
@@ -1384,6 +1385,8 @@ static int bcm_serdev_probe(struct serdev_device *serdev)
 	bcmdev->serdev_hu.serdev = serdev;
 	serdev_device_set_drvdata(serdev, bcmdev);
+	pdev = to_platform_device(bcmdev->dev);
+	bcmdev->irq = platform_get_irq(pdev, 0);
 	if (has_acpi_companion(&serdev->dev))
 		err = bcm_acpi_probe(bcmdev);

             reply index

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-04  7:16 Guillaume La Roque [this message]
  -- strict thread matches above, loose matches on Subject: below --
2019-12-04  7:14 Guillaume La Roque

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Bluetooth Archive on

Archives are clonable:
	git clone --mirror linux-bluetooth/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-bluetooth linux-bluetooth/ \
	public-inbox-index linux-bluetooth

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone