Linux-Bluetooth Archive on lore.kernel.org
 help / color / Atom feed
From: Rocky Liao <rjliao@codeaurora.org>
To: marcel@holtmann.org, johan.hedberg@gmail.com
Cc: mka@chromium.org, linux-kernel@vger.kernel.org,
	linux-bluetooth@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	bgodavar@codeaurora.org, hemantg@codeaurora.org,
	Rocky Liao <rjliao@codeaurora.org>
Subject: [PATCH v4 2/3] Bluetooth: hci_qca: Retry btsoc initialize when it fails
Date: Wed, 15 Jan 2020 16:55:51 +0800
Message-ID: <20200115085552.11483-2-rjliao@codeaurora.org> (raw)
In-Reply-To: <20200115085552.11483-1-rjliao@codeaurora.org>

This patch adds the retry of btsoc initialization when it fails. There are
reports that the btsoc initialization may fail on some platforms but the
repro ratio is very low. The symptoms is the firmware downloading failed
due to the UART write timed out. The failure may be caused by UART,
platform HW or the btsoc itself but it's very difficlut to root cause,
given the repro ratio is very low. Add a retry for the btsoc initialization
can work around most of the failures and make Bluetooth finally works.

Signed-off-by: Rocky Liao <rjliao@codeaurora.org>
---

Changes in v2: None
Changes in v3: None
Changes in v4:
  -rebased the patch with latet code
  -refined macro and variable name
  -updated commit message

 drivers/bluetooth/hci_qca.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index ecb74965be10..1139142e8eed 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -55,6 +55,9 @@
 /* Controller debug log header */
 #define QCA_DEBUG_HANDLE	0x2EDC
 
+/* max retry count when init fails */
+#define MAX_INIT_RETRIES 3
+
 /* Controller dump header */
 #define QCA_SSR_DUMP_HANDLE		0x0108
 #define QCA_DUMP_PACKET_SIZE		255
@@ -1539,6 +1542,7 @@ static int qca_setup(struct hci_uart *hu)
 	struct hci_dev *hdev = hu->hdev;
 	struct qca_data *qca = hu->priv;
 	unsigned int speed, qca_baudrate = QCA_BAUDRATE_115200;
+	unsigned int retries = 0;
 	enum qca_btsoc_type soc_type = qca_soc_type(hu);
 	const char *firmware_name = qca_get_firmware_name(hu);
 	int ret;
@@ -1559,6 +1563,7 @@ static int qca_setup(struct hci_uart *hu)
 	bt_dev_info(hdev, "setting up %s",
 		qca_is_wcn399x(soc_type) ? "wcn399x" : "ROME");
 
+retry:
 	ret = qca_power_on(hdev);
 	if (ret)
 		return ret;
@@ -1613,6 +1618,20 @@ static int qca_setup(struct hci_uart *hu)
 		 * patch/nvm-config is found, so run with original fw/config.
 		 */
 		ret = 0;
+	} else {
+		if (retries < MAX_INIT_RETRIES) {
+			qca_power_shutdown(hu);
+			if (hu->serdev) {
+				serdev_device_close(hu->serdev);
+				ret = serdev_device_open(hu->serdev);
+				if (ret) {
+					bt_dev_err(hdev, "failed to open port");
+					return ret;
+				}
+			}
+			retries++;
+			goto retry;
+		}
 	}
 
 	/* Setup bdaddr */
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project

  reply index

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-25  6:03 [PATCH v1 1/4] Bluetooth: hci_qca: Add QCA Rome power off support to the qca_power_off() Rocky Liao
2019-12-25  6:03 ` [PATCH v1 2/4] Bluetooth: hci_qca: Retry btsoc initialize when it fails Rocky Liao
2019-12-25  6:03 ` [PATCH v1 3/4] Bluetooth: hci_qca: Enable power off/on support during hci down/up for QCA Rome Rocky Liao
2019-12-25  6:03 ` [PATCH v1 4/4] Bluetooth: hci_qca: Add HCI command timeout handling Rocky Liao
2019-12-26  3:04   ` kbuild test robot
2019-12-26  7:46   ` kbuild test robot
2019-12-26 23:33   ` kbuild test robot
2019-12-26  6:45 ` [PATCH v2 1/4] Bluetooth: hci_qca: Add QCA Rome power off support to the qca_power_off() Rocky Liao
2019-12-26  6:45   ` [PATCH v2 2/4] Bluetooth: hci_qca: Retry btsoc initialize when it fails Rocky Liao
2019-12-26  6:45   ` [PATCH v2 3/4] Bluetooth: hci_qca: Enable power off/on support during hci down/up for QCA Rome Rocky Liao
2019-12-26 20:30     ` Marcel Holtmann
2019-12-26  6:45   ` [PATCH v2 4/4] Bluetooth: hci_qca: Add HCI command timeout handling Rocky Liao
2019-12-26 20:29     ` Marcel Holtmann
2019-12-27  7:21 ` [PATCH v3 1/4] Bluetooth: hci_qca: Add QCA Rome power off support to the qca_power_off() Rocky Liao
2019-12-27  7:21   ` [PATCH v3 2/4] Bluetooth: hci_qca: Retry btsoc initialize when it fails Rocky Liao
2020-01-02 18:41     ` Matthias Kaehlcke
2020-01-03  6:31       ` rjliao
2020-01-03 16:27         ` Matthias Kaehlcke
2020-01-07  5:34           ` Rocky Liao
2019-12-27  7:21   ` [PATCH v3 3/4] Bluetooth: hci_qca: Enable power off/on support during hci down/up for QCA Rome Rocky Liao
2019-12-27  7:21   ` [PATCH v3 4/4] Bluetooth: hci_qca: Add HCI command timeout handling Rocky Liao
2020-01-02 19:07     ` Matthias Kaehlcke
2020-01-03  6:33       ` rjliao
2020-01-03  9:02         ` Rocky Liao
2020-01-15  8:55 ` [PATCH v4 1/3] Bluetooth: hci_qca: Add QCA Rome power off support to the qca_power_shutdown() Rocky Liao
2020-01-15  8:55   ` Rocky Liao [this message]
2020-01-15 17:33     ` [PATCH v4 2/3] Bluetooth: hci_qca: Retry btsoc initialize when it fails Matthias Kaehlcke
2020-01-15 21:37     ` Marcel Holtmann
2020-01-15  8:55   ` [PATCH v4 3/3] Bluetooth: hci_qca: Enable power off/on support during hci down/up for QCA Rome Rocky Liao
2020-01-15 18:02     ` Matthias Kaehlcke
2020-01-15 17:26   ` [PATCH v4 1/3] Bluetooth: hci_qca: Add QCA Rome power off support to the qca_power_shutdown() Matthias Kaehlcke
2020-01-15 21:37   ` Marcel Holtmann
2020-01-16  3:22 ` [PATCH v5] Bluetooth: hci_qca: Enable power off/on support during hci down/up for QCA Rome Rocky Liao
2020-01-16  5:31   ` Marcel Holtmann

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200115085552.11483-2-rjliao@codeaurora.org \
    --to=rjliao@codeaurora.org \
    --cc=bgodavar@codeaurora.org \
    --cc=hemantg@codeaurora.org \
    --cc=johan.hedberg@gmail.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marcel@holtmann.org \
    --cc=mka@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Bluetooth Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-bluetooth/0 linux-bluetooth/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-bluetooth linux-bluetooth/ https://lore.kernel.org/linux-bluetooth \
		linux-bluetooth@vger.kernel.org
	public-inbox-index linux-bluetooth

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-bluetooth


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git