linux-bluetooth.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH] Bluetooth: hci_qca: Enable WBS support for wcn3991
@ 2020-05-14  3:41 Abhishek Pandit-Subedi
  2020-05-14 16:30 ` Matthias Kaehlcke
  0 siblings, 1 reply; 3+ messages in thread
From: Abhishek Pandit-Subedi @ 2020-05-14  3:41 UTC (permalink / raw)
  To: linux-bluetooth, bgodavar
  Cc: alainm, marcel, mka, chromeos-bluetooth-upstreaming,
	Abhishek Pandit-Subedi, Johan Hedberg, linux-kernel

WCN3991 supports transparent WBS (host encoded mSBC). Add a flag to the
device match data to show WBS is supported.

This requires the matching firmware for WCN3991 in linux-firmware:
        1a8b0dc00f77 (qca: Enable transparent WBS for WCN3991)

Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
---

 drivers/bluetooth/hci_qca.c | 23 +++++++++++++++++------
 1 file changed, 17 insertions(+), 6 deletions(-)

diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index b3fd07a6f8127..305976c4dcf42 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -75,6 +75,9 @@ enum qca_flags {
 	QCA_HW_ERROR_EVENT
 };
 
+enum qca_driver_flags {
+	QCA_DRV_WIDEBAND_SPEECH_SUPPORTED = 0x1,
+};
 
 /* HCI_IBS transmit side sleep protocol states */
 enum tx_ibs_states {
@@ -187,10 +190,11 @@ struct qca_vreg {
 	unsigned int load_uA;
 };
 
-struct qca_vreg_data {
+struct qca_device_data {
 	enum qca_btsoc_type soc_type;
 	struct qca_vreg *vregs;
 	size_t num_vregs;
+	uint32_t flags;
 };
 
 /*
@@ -1691,7 +1695,7 @@ static const struct hci_uart_proto qca_proto = {
 	.dequeue	= qca_dequeue,
 };
 
-static const struct qca_vreg_data qca_soc_data_wcn3990 = {
+static const struct qca_device_data qca_soc_data_wcn3990 = {
 	.soc_type = QCA_WCN3990,
 	.vregs = (struct qca_vreg []) {
 		{ "vddio", 15000  },
@@ -1702,7 +1706,7 @@ static const struct qca_vreg_data qca_soc_data_wcn3990 = {
 	.num_vregs = 4,
 };
 
-static const struct qca_vreg_data qca_soc_data_wcn3991 = {
+static const struct qca_device_data qca_soc_data_wcn3991 = {
 	.soc_type = QCA_WCN3991,
 	.vregs = (struct qca_vreg []) {
 		{ "vddio", 15000  },
@@ -1711,9 +1715,10 @@ static const struct qca_vreg_data qca_soc_data_wcn3991 = {
 		{ "vddch0", 450000 },
 	},
 	.num_vregs = 4,
+	.flags = QCA_DRV_WIDEBAND_SPEECH_SUPPORTED,
 };
 
-static const struct qca_vreg_data qca_soc_data_wcn3998 = {
+static const struct qca_device_data qca_soc_data_wcn3998 = {
 	.soc_type = QCA_WCN3998,
 	.vregs = (struct qca_vreg []) {
 		{ "vddio", 10000  },
@@ -1724,7 +1729,7 @@ static const struct qca_vreg_data qca_soc_data_wcn3998 = {
 	.num_vregs = 4,
 };
 
-static const struct qca_vreg_data qca_soc_data_qca6390 = {
+static const struct qca_device_data qca_soc_data_qca6390 = {
 	.soc_type = QCA_QCA6390,
 	.num_vregs = 0,
 };
@@ -1860,7 +1865,7 @@ static int qca_serdev_probe(struct serdev_device *serdev)
 {
 	struct qca_serdev *qcadev;
 	struct hci_dev *hdev;
-	const struct qca_vreg_data *data;
+	const struct qca_device_data *data;
 	int err;
 	bool power_ctrl_enabled = true;
 
@@ -1948,6 +1953,12 @@ static int qca_serdev_probe(struct serdev_device *serdev)
 		hdev->shutdown = qca_power_off;
 	}
 
+	/* Wideband speech support must be set per driver since it can't be
+	 * queried via hci.
+	 */
+	if (data && (data->flags & QCA_DRV_WIDEBAND_SPEECH_SUPPORTED))
+		set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks);
+
 	return 0;
 }
 
-- 
2.26.2.761.g0e0b3e54be-goog


^ permalink raw reply related	[flat|nested] 3+ messages in thread

* Re: [PATCH] Bluetooth: hci_qca: Enable WBS support for wcn3991
  2020-05-14  3:41 [PATCH] Bluetooth: hci_qca: Enable WBS support for wcn3991 Abhishek Pandit-Subedi
@ 2020-05-14 16:30 ` Matthias Kaehlcke
  2020-05-14 17:44   ` Abhishek Pandit-Subedi
  0 siblings, 1 reply; 3+ messages in thread
From: Matthias Kaehlcke @ 2020-05-14 16:30 UTC (permalink / raw)
  To: Abhishek Pandit-Subedi
  Cc: linux-bluetooth, bgodavar, alainm, marcel,
	chromeos-bluetooth-upstreaming, Johan Hedberg, linux-kernel

Hi Abhishek,

On Wed, May 13, 2020 at 08:41:25PM -0700, Abhishek Pandit-Subedi wrote:
> WCN3991 supports transparent WBS (host encoded mSBC). Add a flag to the
> device match data to show WBS is supported.

In general this looks good to me, a few nits inside.

> This requires the matching firmware for WCN3991 in linux-firmware:
>         1a8b0dc00f77 (qca: Enable transparent WBS for WCN3991)
> 
> Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
> ---
> 
>  drivers/bluetooth/hci_qca.c | 23 +++++++++++++++++------
>  1 file changed, 17 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
> index b3fd07a6f8127..305976c4dcf42 100644
> --- a/drivers/bluetooth/hci_qca.c
> +++ b/drivers/bluetooth/hci_qca.c
> @@ -75,6 +75,9 @@ enum qca_flags {
>  	QCA_HW_ERROR_EVENT
>  };
>  
> +enum qca_driver_flags {
> +	QCA_DRV_WIDEBAND_SPEECH_SUPPORTED = 0x1,

s/0x1/BIT(0)/

> +};

The 'driver'/'DRV' midfix is a bit misleading. WBS support is a device
capability, it's not something the driver supports or doesn't. Maybe
name it 'qca_capabilities' or similar.

>  /* HCI_IBS transmit side sleep protocol states */
>  enum tx_ibs_states {
> @@ -187,10 +190,11 @@ struct qca_vreg {
>  	unsigned int load_uA;
>  };
>  
> -struct qca_vreg_data {
> +struct qca_device_data {
>  	enum qca_btsoc_type soc_type;
>  	struct qca_vreg *vregs;
>  	size_t num_vregs;
> +	uint32_t flags;

capabilities?

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [PATCH] Bluetooth: hci_qca: Enable WBS support for wcn3991
  2020-05-14 16:30 ` Matthias Kaehlcke
@ 2020-05-14 17:44   ` Abhishek Pandit-Subedi
  0 siblings, 0 replies; 3+ messages in thread
From: Abhishek Pandit-Subedi @ 2020-05-14 17:44 UTC (permalink / raw)
  To: Matthias Kaehlcke
  Cc: Bluez mailing list, bgodavar, Alain Michaud, Marcel Holtmann,
	ChromeOS Bluetooth Upstreaming, Johan Hedberg, LKML

Hi,

On Thu, May 14, 2020 at 9:30 AM Matthias Kaehlcke <mka@chromium.org> wrote:
>
> Hi Abhishek,
>
> On Wed, May 13, 2020 at 08:41:25PM -0700, Abhishek Pandit-Subedi wrote:
> > WCN3991 supports transparent WBS (host encoded mSBC). Add a flag to the
> > device match data to show WBS is supported.
>
> In general this looks good to me, a few nits inside.
>
> > This requires the matching firmware for WCN3991 in linux-firmware:
> >         1a8b0dc00f77 (qca: Enable transparent WBS for WCN3991)
> >
> > Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
> > ---
> >
> >  drivers/bluetooth/hci_qca.c | 23 +++++++++++++++++------
> >  1 file changed, 17 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
> > index b3fd07a6f8127..305976c4dcf42 100644
> > --- a/drivers/bluetooth/hci_qca.c
> > +++ b/drivers/bluetooth/hci_qca.c
> > @@ -75,6 +75,9 @@ enum qca_flags {
> >       QCA_HW_ERROR_EVENT
> >  };
> >
> > +enum qca_driver_flags {
> > +     QCA_DRV_WIDEBAND_SPEECH_SUPPORTED = 0x1,
>
> s/0x1/BIT(0)/

Will change in next version.

>
> > +};
>
> The 'driver'/'DRV' midfix is a bit misleading. WBS support is a device
> capability, it's not something the driver supports or doesn't. Maybe
> name it 'qca_capabilities' or similar.
>
> >  /* HCI_IBS transmit side sleep protocol states */
> >  enum tx_ibs_states {
> > @@ -187,10 +190,11 @@ struct qca_vreg {
> >       unsigned int load_uA;
> >  };
> >
> > -struct qca_vreg_data {
> > +struct qca_device_data {
> >       enum qca_btsoc_type soc_type;
> >       struct qca_vreg *vregs;
> >       size_t num_vregs;
> > +     uint32_t flags;
>
> capabilities?

Capabilities sounds good to me.

Thanks for the feedback.
Abhishek

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2020-05-14 17:45 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-05-14  3:41 [PATCH] Bluetooth: hci_qca: Enable WBS support for wcn3991 Abhishek Pandit-Subedi
2020-05-14 16:30 ` Matthias Kaehlcke
2020-05-14 17:44   ` Abhishek Pandit-Subedi

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).