Linux-Bluetooth Archive on lore.kernel.org
 help / color / Atom feed
From: Matthias Kaehlcke <mka@chromium.org>
To: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Cc: linux-bluetooth@vger.kernel.org, bgodavar@codeaurora.org,
	alainm@chromium.org, marcel@holtmann.org,
	chromeos-bluetooth-upstreaming@chromium.org,
	Johan Hedberg <johan.hedberg@gmail.com>,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] Bluetooth: hci_qca: Enable WBS support for wcn3991
Date: Thu, 14 May 2020 14:07:24 -0700
Message-ID: <20200514210724.GQ4525@google.com> (raw)
In-Reply-To: <20200514131338.v2.1.I68404fc395a3dbc57c8a89ca02490013e8003a87@changeid>

Hi Abhishek,

On Thu, May 14, 2020 at 01:14:04PM -0700, Abhishek Pandit-Subedi wrote:
> WCN3991 supports transparent WBS (host encoded mSBC). Add a flag to the
> device match data to show WBS is supported.
> 
> This requires the matching firmware for WCN3991 in linux-firmware:
>         1a8b0dc00f77 (qca: Enable transparent WBS for WCN3991)
> 
> Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
> ---
> 
> Changes in v2:
> - Rename struct to qca_capabilities and fix enum naming
> 
>  drivers/bluetooth/hci_qca.c | 23 +++++++++++++++++------
>  1 file changed, 17 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
> index b3fd07a6f8127..96799644f0933 100644
> --- a/drivers/bluetooth/hci_qca.c
> +++ b/drivers/bluetooth/hci_qca.c
> @@ -75,6 +75,9 @@ enum qca_flags {
>  	QCA_HW_ERROR_EVENT
>  };
>  
> +enum qca_capabilities {
> +	QCA_CAP_WIDEBAND_SPEECH_SUPPORTED = BIT(0),

nit: the '_SUPPORTED' suffix seems somewhat redundant, given that this
is a capability (as 'CAP' indicates). Up to you if you want to keep it.

> +};
>  
>  /* HCI_IBS transmit side sleep protocol states */
>  enum tx_ibs_states {
> @@ -187,10 +190,11 @@ struct qca_vreg {
>  	unsigned int load_uA;
>  };
>  
> -struct qca_vreg_data {
> +struct qca_device_data {
>  	enum qca_btsoc_type soc_type;
>  	struct qca_vreg *vregs;
>  	size_t num_vregs;
> +	uint32_t capabilities;
>  };
>  
>  /*
> @@ -1691,7 +1695,7 @@ static const struct hci_uart_proto qca_proto = {
>  	.dequeue	= qca_dequeue,
>  };
>  
> -static const struct qca_vreg_data qca_soc_data_wcn3990 = {
> +static const struct qca_device_data qca_soc_data_wcn3990 = {
>  	.soc_type = QCA_WCN3990,
>  	.vregs = (struct qca_vreg []) {
>  		{ "vddio", 15000  },
> @@ -1702,7 +1706,7 @@ static const struct qca_vreg_data qca_soc_data_wcn3990 = {
>  	.num_vregs = 4,
>  };
>  
> -static const struct qca_vreg_data qca_soc_data_wcn3991 = {
> +static const struct qca_device_data qca_soc_data_wcn3991 = {
>  	.soc_type = QCA_WCN3991,
>  	.vregs = (struct qca_vreg []) {
>  		{ "vddio", 15000  },
> @@ -1711,9 +1715,10 @@ static const struct qca_vreg_data qca_soc_data_wcn3991 = {
>  		{ "vddch0", 450000 },
>  	},
>  	.num_vregs = 4,
> +	.capabilities = QCA_CAP_WIDEBAND_SPEECH_SUPPORTED,
>  };
>  
> -static const struct qca_vreg_data qca_soc_data_wcn3998 = {
> +static const struct qca_device_data qca_soc_data_wcn3998 = {
>  	.soc_type = QCA_WCN3998,
>  	.vregs = (struct qca_vreg []) {
>  		{ "vddio", 10000  },
> @@ -1724,7 +1729,7 @@ static const struct qca_vreg_data qca_soc_data_wcn3998 = {
>  	.num_vregs = 4,
>  };
>  
> -static const struct qca_vreg_data qca_soc_data_qca6390 = {
> +static const struct qca_device_data qca_soc_data_qca6390 = {
>  	.soc_type = QCA_QCA6390,
>  	.num_vregs = 0,
>  };
> @@ -1860,7 +1865,7 @@ static int qca_serdev_probe(struct serdev_device *serdev)
>  {
>  	struct qca_serdev *qcadev;
>  	struct hci_dev *hdev;
> -	const struct qca_vreg_data *data;
> +	const struct qca_device_data *data;
>  	int err;
>  	bool power_ctrl_enabled = true;
>  
> @@ -1948,6 +1953,12 @@ static int qca_serdev_probe(struct serdev_device *serdev)
>  		hdev->shutdown = qca_power_off;
>  	}
>  
> +	/* Wideband speech support must be set per driver since it can't be
> +	 * queried via hci.
> +	 */
> +	if (data && (data->capabilities & QCA_CAP_WIDEBAND_SPEECH_SUPPORTED))
> +		set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks);
> +
>  	return 0;
>  }

Reviewed-by: Matthias Kaehlcke <mka@chromium.org>

  reply index

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-14 20:14 Abhishek Pandit-Subedi
2020-05-14 21:07 ` Matthias Kaehlcke [this message]
2020-05-18  8:03 ` Marcel Holtmann
2020-05-18 18:12   ` Abhishek Pandit-Subedi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200514210724.GQ4525@google.com \
    --to=mka@chromium.org \
    --cc=abhishekpandit@chromium.org \
    --cc=alainm@chromium.org \
    --cc=bgodavar@codeaurora.org \
    --cc=chromeos-bluetooth-upstreaming@chromium.org \
    --cc=johan.hedberg@gmail.com \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marcel@holtmann.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Bluetooth Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-bluetooth/0 linux-bluetooth/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-bluetooth linux-bluetooth/ https://lore.kernel.org/linux-bluetooth \
		linux-bluetooth@vger.kernel.org
	public-inbox-index linux-bluetooth

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-bluetooth


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git