Linux-Bluetooth Archive on
 help / color / Atom feed
* [Bluez PATCH v1] device - If HFP is supported, ignore HSP
@ 2020-06-30 22:49 Yu Liu
  2020-07-01  0:30 ` Luiz Augusto von Dentz
  2020-07-03 10:15 ` Pali Rohár
  0 siblings, 2 replies; 3+ messages in thread
From: Yu Liu @ 2020-06-30 22:49 UTC (permalink / raw)
  To: linux-bluetooth; +Cc: Hsin-Yu Chao, Sonny Sasaka

From: Hsin-Yu Chao <>

For a BT headset that supports both HSP and HFP, BlueZ creates
service instances for these two profiles and connects them.
It's uncertain that which of HSP and HFP eventually get connected
and being used for SCO audio. And we start observing some problem
because of this uncertainty:

- For headset that supports WBS, we need HFP connect for codec
negotiation. If HSP connects but not HFP, WBS cannot be used.
- For WH-1000XM3, if BlueZ ever initiated HFP connection but failed,
headset won't have working SCO audio even HSP is connected.

Fix this at when device probes services, if HFP is in the uuid list,
don't bother create one for HSP.

Reviewed-by: Sonny Sasaka <>

Changes in v1:
- Initial change

 src/device.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/src/device.c b/src/device.c
index 7b0eb256e..4036bfd81 100644
--- a/src/device.c
+++ b/src/device.c
@@ -4370,6 +4370,11 @@ static struct btd_service *probe_service(struct btd_device *device,
 	if (!device_match_profile(device, profile, uuids))
 		return NULL;
+	/* If device supports HFP, don't bother create service for HSP. */
+	if (g_slist_find_custom(uuids, HFP_HS_UUID, bt_uuid_strcmp) &&
+		bt_uuid_strcmp(profile->remote_uuid, HSP_HS_UUID) == 0)
+		return NULL;
 	l = find_service_with_profile(device->services, profile);
 	if (l)
 		return l->data;

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, back to index

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-06-30 22:49 [Bluez PATCH v1] device - If HFP is supported, ignore HSP Yu Liu
2020-07-01  0:30 ` Luiz Augusto von Dentz
2020-07-03 10:15 ` Pali Rohár

Linux-Bluetooth Archive on

Archives are clonable:
	git clone --mirror linux-bluetooth/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-bluetooth linux-bluetooth/ \
	public-inbox-index linux-bluetooth

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone