Linux-Bluetooth Archive on lore.kernel.org
 help / color / Atom feed
From: Johan Hedberg <johan.hedberg@gmail.com>
To: davem@davemloft.net
Cc: linux-bluetooth@vger.kernel.org, netdev@vger.kernel.org
Subject: pull request: bluetooth-next 2020-07-31
Date: Fri, 31 Jul 2020 17:35:15 +0300
Message-ID: <20200731143515.GA79165@markorti-mobl.ger.corp.intel.com> (raw)


[-- Attachment #1: Type: text/plain, Size: 10259 bytes --]

Hi Dave,

Here's the main bluetooth-next pull request for 5.9:

 - Fix firmware filenames for Marvell chipsets
 - Several suspend-related fixes
 - Addedd mgmt commands for runtime configuration
 - Multiple fixes for Qualcomm-based controllers
 - Add new monitoring feature for mgmt
 - Fix handling of legacy cipher (E4) together with security level 4
 - Add support for Realtek 8822CE controller
 - Fix issues with Chinese controllers using fake VID/PID values
 - Multiple other smaller fixes & improvements

Please let me know if there are any issues pulling. Thanks.

Johan

---
The following changes since commit 065fcfd49763ec71ae345bb5c5a74f961031e70e:

  selftests: net: ip_defrag: ignore EPERM (2020-06-02 15:54:20 -0700)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next.git for-upstream

for you to fetch changes up to 075f77324f90149bac12c8a705dae5786a1d24fb:

  Bluetooth: Remove CRYPTO_ALG_INTERNAL flag (2020-07-31 16:42:04 +0300)

----------------------------------------------------------------
Abhishek Pandit-Subedi (15):
      Bluetooth: Allow suspend even when preparation has failed
      Bluetooth: btmrvl_sdio: Set parent dev to hdev
      Bluetooth: btmrvl_sdio: Implement prevent_wake
      Bluetooth: btmrvl_sdio: Refactor irq wakeup
      Bluetooth: Add bdaddr_list_with_flags for classic whitelist
      Bluetooth: Replace wakeable list with flag
      Bluetooth: Replace wakeable in hci_conn_params
      Bluetooth: Add get/set device flags mgmt op
      Bluetooth: Add hci_dev_lock to get/set device flags
      Bluetooth: btusb: Reset port on cmd timeout
      Bluetooth: btusb: BTUSB_WAKEUP_DISABLE prevents wake
      Bluetooth: Don't restart scanning if paused
      Bluetooth: btusb: Comment on unbalanced pm reference
      Bluetooth: Fix suspend notifier race
      Revert "Bluetooth: btusb: Disable runtime suspend on Realtek devices"

Alain Michaud (11):
      Bluetooth: Removing noisy dbg message
      Bluetooth: Add support for BT_PKT_STATUS CMSG data for SCO connections
      Bluetooth: Use only 8 bits for the HCI CMSG state flags
      Bluetooth: mgmt: read/set system parameter definitions
      Bluetooth: centralize default value initialization.
      Bluetooth: implement read/set default system parameters mgmt
      Bluetooth: use configured params for ext adv
      Bluetooth: Adding a configurable autoconnect timeout
      Bluetooth: use configured default params for active scans
      Bluetooth: le_simult_central_peripheral experimental feature
      Bluetooth: use the proper scan params when conn is pending

Alexander A. Klimov (1):
      Replace HTTP links with HTTPS ones: BLUETOOTH SUBSYSTEM

Balakrishna Godavarthi (3):
      Bluetooth: hci_qca: Disable SoC debug logging for WCN3991
      Bluetooth: hci_qca: Increase SoC idle timeout to 200ms
      Bluetooth: hci_qca: Request Tx clock vote off only when Tx is pending

Chethan T N (2):
      Bluetooth: btusb: Add support to read Intel debug feature
      Bluetooth: btusb: Configure Intel debug feature based on available support

Dan Carpenter (1):
      Bluetooth: hci_qca: Fix an error pointer dereference

Daniel Winkler (1):
      Bluetooth: Add per-instance adv disable/remove

Gustavo A. R. Silva (3):
      Bluetooth: core: Use fallthrough pseudo-keyword
      Bluetooth: RFCOMM: Use fallthrough pseudo-keyword
      Bluetooth: Use fallthrough pseudo-keyword

Herbert Xu (1):
      Bluetooth: Remove CRYPTO_ALG_INTERNAL flag

Hilda Wu (1):
      Bluetooth: btusb: USB alternate setting 1 for WBS

Ismael Ferreras Morezuelas (1):
      Bluetooth: btusb: Fix and detect most of the Chinese Bluetooth controllers

Joseph Hwang (1):
      Bluetooth: btusb: add Realtek 8822CE to usb_device_id table

Kiran K (1):
      Bluetooth: btusb: Refactor of firmware download flow for Intel conrollers

Lihong Kou (1):
      Bluetooth: add a mutex lock to avoid UAF in do_enale_set

Luiz Augusto von Dentz (1):
      Bluetooth: Disconnect if E0 is used for Level 4

Manish Mandlik (2):
      Bluetooth: Check scan state before disabling during suspend
      Bluetooth: Terminate the link if pairing is cancelled

Marcel Holtmann (6):
      Bluetooth: mgmt: Add commands for runtime configuration
      Bluetooth: mgmt: Use command complete on success for set system config
      Bluetooth: Translate additional address type correctly
      Bluetooth: Configure controller address resolution if available
      Bluetooth: Update resolving list when updating whitelist
      Bluetooth: Increment management interface revision

Martin Blumenstingl (1):
      dt-bindings: net: bluetooth: realtek: Fix uart-has-rtscts example

Matthias Kaehlcke (4):
      Bluetooth: hci_qca: Simplify determination of serial clock on/off state from votes
      Bluetooth: hci_qca: Only remove TX clock vote after TX is completed
      Bluetooth: hci_qca: Skip serdev wait when no transfer is pending
      Bluetooth: hci_qca: Refactor error handling in qca_suspend()

Max Chou (1):
      Bluetooth: Return NOTIFY_DONE for hci_suspend_notifier

Miao-chen Chou (9):
      Bluetooth: Add definitions for advertisement monitor features
      Bluetooth: Add handler of MGMT_OP_READ_ADV_MONITOR_FEATURES
      Bluetooth: Add handler of MGMT_OP_ADD_ADV_PATTERNS_MONITOR
      Bluetooth: Add handler of MGMT_OP_REMOVE_ADV_MONITOR
      Bluetooth: Notify adv monitor added event
      Bluetooth: Notify adv monitor removed event
      Bluetooth: Update background scan and report device based on advertisement monitors
      Bluetooth: Fix kernel oops triggered by hci_adv_monitors_clear()
      Bluetooth: Use whitelist for scan policy when suspending

Nicolas Boichat (2):
      Bluetooth: hci_h5: Set HCI_UART_RESET_ON_INIT to correct flags
      Bluetooth: hci_serdev: Only unregister device if it was registered

Pali Rohár (4):
      mwifiex: Fix firmware filename for sd8977 chipset
      mwifiex: Fix firmware filename for sd8997 chipset
      btmrvl: Fix firmware filename for sd8977 chipset
      btmrvl: Fix firmware filename for sd8997 chipset

Patrick Steinhardt (1):
      Bluetooth: Fix update of connection state in `hci_encrypt_cfm`

Peilin Ye (3):
      Bluetooth: Fix slab-out-of-bounds read in hci_extended_inquiry_result_evt()
      Bluetooth: Prevent out-of-bounds read in hci_inquiry_result_evt()
      Bluetooth: Prevent out-of-bounds read in hci_inquiry_result_with_rssi_evt()

Sathish Narasimman (5):
      Bluetooth: Translate additional address type during le_conn
      Bluetooth: Let controller creates RPA during le create conn
      Bluetooth: Enable/Disable address resolution during le create conn
      Bluetooth: Enable RPA Timeout
      Bluetooth: Enable controller RPA resolution using Experimental feature

Sean Wang (2):
      Bluetooth: btusb: fix up firmware download sequence
      Bluetooth: btmtksdio: fix up firmware download sequence

Venkata Lakshmi Narayana Gubba (3):
      Bluetooth: hci_qca: Bug fix during SSR timeout
      Bluetooth: hci_qca: Bug fixes for SSR
      Bluetooth: hci_qca: Stop collecting memdump again for command timeout during SSR

 .../devicetree/bindings/net/realtek-bluetooth.yaml |   2 +-
 drivers/bluetooth/bcm203x.c                        |   2 +-
 drivers/bluetooth/bluecard_cs.c                    |   2 -
 drivers/bluetooth/btintel.c                        |  59 +++
 drivers/bluetooth/btintel.h                        |  21 +
 drivers/bluetooth/btmrvl_main.c                    |  11 +
 drivers/bluetooth/btmrvl_sdio.c                    |  21 +-
 drivers/bluetooth/btmtksdio.c                      |  16 +-
 drivers/bluetooth/btqca.c                          |  27 +
 drivers/bluetooth/btqca.h                          |   2 +
 drivers/bluetooth/btusb.c                          | 303 +++++++----
 drivers/bluetooth/hci_h5.c                         |   2 +-
 drivers/bluetooth/hci_ll.c                         |   2 +-
 drivers/bluetooth/hci_qca.c                        | 134 +++--
 drivers/bluetooth/hci_serdev.c                     |   3 +-
 drivers/net/wireless/marvell/mwifiex/sdio.h        |   4 +-
 include/net/bluetooth/bluetooth.h                  |  12 +
 include/net/bluetooth/hci.h                        |  28 +-
 include/net/bluetooth/hci_core.h                   | 107 +++-
 include/net/bluetooth/hci_sock.h                   |   4 +-
 include/net/bluetooth/mgmt.h                       |  95 ++++
 include/net/bluetooth/sco.h                        |   2 +
 net/bluetooth/6lowpan.c                            |   5 +
 net/bluetooth/Kconfig                              |   2 +-
 net/bluetooth/Makefile                             |   2 +-
 net/bluetooth/af_bluetooth.c                       |   5 +-
 net/bluetooth/hci_conn.c                           |  51 +-
 net/bluetooth/hci_core.c                           | 212 +++++++-
 net/bluetooth/hci_event.c                          |  71 ++-
 net/bluetooth/hci_request.c                        | 286 ++++++++--
 net/bluetooth/hci_request.h                        |   5 +-
 net/bluetooth/hci_sock.c                           |   7 +-
 net/bluetooth/l2cap_core.c                         |  25 +-
 net/bluetooth/l2cap_sock.c                         |   4 +-
 net/bluetooth/mgmt.c                               | 577 ++++++++++++++++++++-
 net/bluetooth/mgmt_config.c                        | 283 ++++++++++
 net/bluetooth/mgmt_config.h                        |  17 +
 net/bluetooth/msft.c                               |   7 +
 net/bluetooth/msft.h                               |   9 +
 net/bluetooth/rfcomm/core.c                        |   2 +-
 net/bluetooth/rfcomm/sock.c                        |   2 +-
 net/bluetooth/sco.c                                |  32 ++
 net/bluetooth/selftest.c                           |   2 +-
 net/bluetooth/smp.c                                |   8 +-
 44 files changed, 2149 insertions(+), 324 deletions(-)
 create mode 100644 net/bluetooth/mgmt_config.c
 create mode 100644 net/bluetooth/mgmt_config.h

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

                 reply index

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200731143515.GA79165@markorti-mobl.ger.corp.intel.com \
    --to=johan.hedberg@gmail.com \
    --cc=davem@davemloft.net \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Bluetooth Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-bluetooth/0 linux-bluetooth/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-bluetooth linux-bluetooth/ https://lore.kernel.org/linux-bluetooth \
		linux-bluetooth@vger.kernel.org
	public-inbox-index linux-bluetooth

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-bluetooth


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git