From: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
To: linux-bluetooth@vger.kernel.org
Subject: [PATCH v4 3/6] Bluetooth: btintel: Consolidate intel_version_tlv parsing
Date: Wed, 10 Feb 2021 08:59:13 -0800 [thread overview]
Message-ID: <20210210165916.2148856-3-luiz.dentz@gmail.com> (raw)
In-Reply-To: <20210210165916.2148856-1-luiz.dentz@gmail.com>
From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This moves checks version checks of intel_version_tlv to
btintel_version_info_tlv.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
---
drivers/bluetooth/btintel.c | 50 ++++++++++++++++++++++++++++++---
drivers/bluetooth/btintel.h | 2 +-
drivers/bluetooth/btusb.c | 56 ++-----------------------------------
3 files changed, 50 insertions(+), 58 deletions(-)
diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c
index 0d0f643f972a..82fba6b9328f 100644
--- a/drivers/bluetooth/btintel.c
+++ b/drivers/bluetooth/btintel.c
@@ -372,10 +372,53 @@ int btintel_read_version(struct hci_dev *hdev, struct intel_version *ver)
}
EXPORT_SYMBOL_GPL(btintel_read_version);
-void btintel_version_info_tlv(struct hci_dev *hdev, struct intel_version_tlv *version)
+int btintel_version_info_tlv(struct hci_dev *hdev, struct intel_version_tlv *version)
{
const char *variant;
+ /* The hardware platform number has a fixed value of 0x37 and
+ * for now only accept this single value.
+ */
+ if (INTEL_HW_PLATFORM(version->cnvi_bt) != 0x37) {
+ bt_dev_err(hdev, "Unsupported Intel hardware platform (0x%2x)",
+ INTEL_HW_PLATFORM(version->cnvi_bt));
+ return -EINVAL;
+ }
+
+ /* Check for supported iBT hardware variants of this firmware
+ * loading method.
+ *
+ * This check has been put in place to ensure correct forward
+ * compatibility options when newer hardware variants come along.
+ */
+ switch (INTEL_HW_VARIANT(version->cnvi_bt)) {
+ case 0x17: /* TyP */
+ case 0x18: /* Slr */
+ case 0x19: /* Slr-F */
+ break;
+ default:
+ bt_dev_err(hdev, "Unsupported Intel hardware variant (0x%x)",
+ INTEL_HW_VARIANT(version->cnvi_bt));
+ return -EINVAL;
+ }
+
+ /* It is required that every single firmware fragment is acknowledged
+ * with a command complete event. If the boot parameters indicate
+ * that this bootloader does not send them, then abort the setup.
+ */
+ if (version->limited_cce != 0x00) {
+ bt_dev_err(hdev, "Unsupported Intel firmware loading method (0x%x)",
+ version->limited_cce);
+ return -EINVAL;
+ }
+
+ /* Secure boot engine type should be either 1 (ECDSA) or 0 (RSA) */
+ if (version->sbe_type > 0x01) {
+ bt_dev_err(hdev, "Unsupported Intel secure boot engine type (0x%x)",
+ version->sbe_type);
+ return -EINVAL;
+ }
+
switch (version->img_type) {
case 0x01:
variant = "Bootloader";
@@ -397,15 +440,14 @@ void btintel_version_info_tlv(struct hci_dev *hdev, struct intel_version_tlv *ve
break;
default:
bt_dev_err(hdev, "Unsupported image type(%02x)", version->img_type);
- goto done;
+ return -EINVAL;
}
bt_dev_info(hdev, "%s timestamp %u.%u buildtype %u build %u", variant,
2000 + (version->timestamp >> 8), version->timestamp & 0xff,
version->build_type, version->build_num);
-done:
- return;
+ return 0;
}
EXPORT_SYMBOL_GPL(btintel_version_info_tlv);
diff --git a/drivers/bluetooth/btintel.h b/drivers/bluetooth/btintel.h
index 51f1f2c883b4..94a63e898826 100644
--- a/drivers/bluetooth/btintel.h
+++ b/drivers/bluetooth/btintel.h
@@ -149,7 +149,7 @@ int btintel_set_diag_mfg(struct hci_dev *hdev, bool enable);
void btintel_hw_error(struct hci_dev *hdev, u8 code);
void btintel_version_info(struct hci_dev *hdev, struct intel_version *ver);
-void btintel_version_info_tlv(struct hci_dev *hdev, struct intel_version_tlv *version);
+int btintel_version_info_tlv(struct hci_dev *hdev, struct intel_version_tlv *version);
int btintel_secure_send(struct hci_dev *hdev, u8 fragment_type, u32 plen,
const void *param);
int btintel_load_ddc_config(struct hci_dev *hdev, const char *ddc_name);
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index a44f3cf25790..634406058ccf 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2542,15 +2542,6 @@ static int btusb_intel_download_firmware_newgen(struct hci_dev *hdev,
if (!ver || !boot_param)
return -EINVAL;
- /* The hardware platform number has a fixed value of 0x37 and
- * for now only accept this single value.
- */
- if (INTEL_HW_PLATFORM(ver->cnvi_bt) != 0x37) {
- bt_dev_err(hdev, "Unsupported Intel hardware platform (0x%2x)",
- INTEL_HW_PLATFORM(ver->cnvi_bt));
- return -EINVAL;
- }
-
/* The firmware variant determines if the device is in bootloader
* mode or is running operational firmware. The value 0x03 identifies
* the bootloader and the value 0x23 identifies the operational
@@ -2569,49 +2560,6 @@ static int btusb_intel_download_firmware_newgen(struct hci_dev *hdev,
btintel_check_bdaddr(hdev);
}
- /* Check for supported iBT hardware variants of this firmware
- * loading method.
- *
- * This check has been put in place to ensure correct forward
- * compatibility options when newer hardware variants come along.
- */
- switch (INTEL_HW_VARIANT(ver->cnvi_bt)) {
- case 0x17: /* TyP */
- case 0x18: /* Slr */
- case 0x19: /* Slr-F */
- break;
- default:
- bt_dev_err(hdev, "Unsupported Intel hardware variant (0x%x)",
- INTEL_HW_VARIANT(ver->cnvi_bt));
- return -EINVAL;
- }
-
- /* If the device is not in bootloader mode, then the only possible
- * choice is to return an error and abort the device initialization.
- */
- if (ver->img_type != 0x01) {
- bt_dev_err(hdev, "Unsupported Intel firmware variant (0x%x)",
- ver->img_type);
- return -ENODEV;
- }
-
- /* It is required that every single firmware fragment is acknowledged
- * with a command complete event. If the boot parameters indicate
- * that this bootloader does not send them, then abort the setup.
- */
- if (ver->limited_cce != 0x00) {
- bt_dev_err(hdev, "Unsupported Intel firmware loading method (0x%x)",
- ver->limited_cce);
- return -EINVAL;
- }
-
- /* Secure boot engine type should be either 1 (ECDSA) or 0 (RSA) */
- if (ver->sbe_type > 0x01) {
- bt_dev_err(hdev, "Unsupported Intel secure boot engine type (0x%x)",
- ver->sbe_type);
- return -EINVAL;
- }
-
/* If the OTP has no valid Bluetooth device address, then there will
* also be no valid address for the operational firmware.
*/
@@ -3043,7 +2991,9 @@ static int btusb_setup_intel_newgen(struct hci_dev *hdev)
return err;
}
- btintel_version_info_tlv(hdev, &version);
+ err = btintel_version_info_tlv(hdev, &version);
+ if (err)
+ return err;
err = btusb_intel_download_firmware_newgen(hdev, &version, &boot_param);
if (err)
--
2.26.2
next prev parent reply other threads:[~2021-02-10 17:00 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-10 16:59 [PATCH v4 1/6] Bluetooth: btintel: Check firmware version before download Luiz Augusto von Dentz
2021-02-10 16:59 ` [PATCH v4 2/6] Bluetooth: btintel: Move operational checks after version check Luiz Augusto von Dentz
2021-02-10 19:09 ` An, Tedd
2021-02-10 19:20 ` Luiz Augusto von Dentz
2021-02-10 20:25 ` An, Tedd
2021-02-10 16:59 ` Luiz Augusto von Dentz [this message]
2021-02-10 16:59 ` [PATCH v4 4/6] Bluetooth: btintel: Consolidate intel_version parsing Luiz Augusto von Dentz
2021-02-10 16:59 ` [PATCH v4 5/6] Bluetooth: btusb: Consolidate code for waiting firmware download Luiz Augusto von Dentz
2021-02-10 16:59 ` [PATCH v4 6/6] Bluetooth: btusb: Consolidate code for waiting firmware to boot Luiz Augusto von Dentz
2021-02-10 17:33 ` [v4,1/6] Bluetooth: btintel: Check firmware version before download bluez.test.bot
2021-02-10 18:50 ` [PATCH v4 1/6] " Tedd Ho-Jeong An
2021-02-10 19:06 ` Luiz Augusto von Dentz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210210165916.2148856-3-luiz.dentz@gmail.com \
--to=luiz.dentz@gmail.com \
--cc=linux-bluetooth@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).