[PATCH BlueZ 7/7] adapter: Save PHY Configuration in storage and read it at init

[Ayush Garg <ayush.garg@samsung.com>]

This change will save the current selected PHY configuration
in the storage when PHY Configuration Changed Event is
received. It will also load and set the stored PHY configuration
when controller initialized. Thus it enables the user to continue
with the last selected PHYs on controller restart.

Reviewed-by: Anupam Roy <anupam.r@samsung.com>
---
 src/adapter.c | 30 +++++++++++++++++++++++++++++-
 1 file changed, 29 insertions(+), 1 deletion(-)

diff --git a/src/adapter.c b/src/adapter.c
index 84dd2e5bd..3861ade8a 100644
--- a/src/adapter.c
+++ b/src/adapter.c
@@ -288,7 +288,8 @@ struct btd_adapter {
 
 	uint32_t supported_phys;
 	uint32_t configurable_phys;
-	uint32_t selected_phys;
+	uint32_t selected_phys;		/* Current selected PHYs */
+	uint32_t stored_phys;		/* Stored last selected PHYs */
 	uint32_t pending_phys;
 };
 
@@ -508,6 +509,10 @@ static void store_adapter_info(struct btd_adapter *adapter)
 		g_key_file_set_string(key_file, "General", "Alias",
 							adapter->stored_alias);
 
+	if (adapter->stored_phys)
+		g_key_file_set_integer(key_file, "General", "PhyConfiguration",
+					adapter->stored_phys);
+
 	snprintf(filename, PATH_MAX, STORAGEDIR "/%s/settings",
 					btd_adapter_get_storage_dir(adapter));
 
@@ -3329,10 +3334,13 @@ static void set_default_phy_complete(uint8_t status, uint16_t length,
 	btd_info(adapter->dev_id, "PHY configuration successfully set");
 
 	adapter->selected_phys = adapter->pending_phys;
+	adapter->stored_phys = adapter->pending_phys;
 	adapter->pending_phys = 0;
 
 	g_dbus_pending_property_success(data->id);
 
+	store_adapter_info(adapter);
+
 	g_dbus_emit_property_changed(dbus_conn, adapter->path,
 					ADAPTER_INTERFACE, "PhyConfiguration");
 }
@@ -6548,6 +6556,15 @@ static void load_config(struct btd_adapter *adapter)
 		gerr = NULL;
 	}
 
+	/* Get PHY Configuration */
+	adapter->stored_phys = g_key_file_get_integer(key_file,
+				"General", "PhyConfiguration", &gerr);
+	if (gerr) {
+		adapter->stored_phys = 0;
+		g_error_free(gerr);
+		gerr = NULL;
+	}
+
 	g_key_file_free(key_file);
 }
 
@@ -9670,6 +9687,13 @@ static void read_phy_configuration_resp(uint8_t status, uint16_t length,
 	DBG("Supported phys: [0x%x]", adapter->supported_phys);
 	DBG("Configurable phys: [0x%x]", adapter->configurable_phys);
 	DBG("Selected phys: [0x%x]", adapter->selected_phys);
+
+	/*
+	 * Set the default PHYs to the last selected PHYs on which the
+	 * controller was operating before shutting down.
+	 */
+	if (adapter->supported_settings & MGMT_SETTING_PHY_CONFIGURATION)
+		set_default_phy(adapter, adapter->stored_phys, -1);
 }
 
 static void read_phy_configuration(struct btd_adapter *adapter)
@@ -9696,10 +9720,14 @@ static void phy_configuration_changed_callback(uint16_t index,
 	}
 
 	adapter->selected_phys = get_le32(&ev->selected_phys);
+	adapter->stored_phys = adapter->selected_phys;
+
 	info("PHYs changed, New PHYs [0x%x]", adapter->selected_phys);
 
 	adapter->pending_phys = 0;
 
+	store_adapter_info(adapter);
+
 	g_dbus_emit_property_changed(dbus_conn, adapter->path,
 					ADAPTER_INTERFACE, "PhyConfiguration");
 }
-- 
2.17.1