linux-bluetooth.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Tedd Ho-Jeong An <hj.tedd.an@gmail.com>
To: linux-bluetooth@vger.kernel.org
Cc: Tedd Ho-Jeong An <tedd.an@intel.com>
Subject: [RFC PATCH v4 00/11] Bluetooth: btintel: Refactoring setup routines
Date: Tue, 27 Jul 2021 16:51:16 -0700	[thread overview]
Message-ID: <20210727235127.173149-1-hj.tedd.an@gmail.com> (raw)

From: Tedd Ho-Jeong An <tedd.an@intel.com>

This patch set refactors the multiple setup routines for various Intel devices
to a combined single entry. Here are the highlight of the changes:

0. Sync with the current tip of the master:
   acd5aea400 ("Bluetooth: btusb: Add valid le states quirk")

1. Updated hci_alloc_dev() to allocate the hdev object with an extra buffer
   for the private data. btintel introduces the btintel_data struct and
   store it to the private data in hdev object.

2. Added a single entry for setup and shutdown and uses the
   HCI_Intel_Read_Version command to identify the device, instead of
   relying on the USB VID and PID.

   Also, it uses the new format of HCI_Intel_Read_Version command for
   legacy ROM and legacy bootloader devices. Luckly legacy devices
   support the new format.

3. Keep the state of bootloader in btintel object. The bootloader state
   is agnostic to the transport type, so btintel uses the btintel_data
   to keep track of the state in the private data section in hdev.

4. After identifying the setup type for the device, it uses the
   correspond setup routines based on the setup type, and the setup
   routines were moved from btusb to btintel.
   However, actual work for the setup routines were not changed or very
   minimal.

5. Since many functions were moved from btusb to btintel, clean up the
   exported functions and make them static if possible.

6. From the JfP/ThP, the operational firmware support the new TLV based
   HCI_Intel_Read_Version command, which confues the usage during the
   setup routine. So, the check for firmware variant of those legacy
   bootloader sku is added to use the legacy bootloader setup call.

Tedd Ho-Jeong An (11):
  Bluetooth: Add support hdev to allocate private data
  Bluetooth: btintel: Add combined setup and shutdown functions
  Bluetooth: btintel: Refactoring setup routine for legacy ROM sku
  Bluetooth: btintel: Add btintel data struct
  Bluetooth: btintel: Fix the first HCI command not work with ROM
    device.
  Bluetooth: btintel: Fix the LED is not turning off immediately
  Bluetooth: btintel: Add combined set_diag functions
  Bluetooth: btintel: Refactoring setup routine for legacy bootloader
  Bluetooth: btintel: Refactoring setup routine for TLV based booloader
  Bluetooth: btintel: Clean the exported function to static
  Bluetooth: btintel: Fix the legacy bootloader returns tlv based
    version

 drivers/bluetooth/bfusb.c        |    2 +-
 drivers/bluetooth/bluecard_cs.c  |    2 +-
 drivers/bluetooth/bpa10x.c       |    2 +-
 drivers/bluetooth/bt3c_cs.c      |    2 +-
 drivers/bluetooth/btintel.c      | 1214 ++++++++++++++++++++++++++++--
 drivers/bluetooth/btintel.h      |   83 +-
 drivers/bluetooth/btmrvl_main.c  |    2 +-
 drivers/bluetooth/btmtksdio.c    |    2 +-
 drivers/bluetooth/btmtkuart.c    |    2 +-
 drivers/bluetooth/btqcomsmd.c    |    2 +-
 drivers/bluetooth/btrsi.c        |    2 +-
 drivers/bluetooth/btsdio.c       |    2 +-
 drivers/bluetooth/btusb.c        | 1105 ++-------------------------
 drivers/bluetooth/dtl1_cs.c      |    2 +-
 drivers/bluetooth/hci_ldisc.c    |    2 +-
 drivers/bluetooth/hci_serdev.c   |    2 +-
 drivers/bluetooth/hci_vhci.c     |    2 +-
 drivers/bluetooth/virtio_bt.c    |    2 +-
 include/net/bluetooth/hci_core.h |    7 +-
 net/bluetooth/hci_core.c         |   11 +-
 20 files changed, 1262 insertions(+), 1188 deletions(-)

-- 
2.26.3


             reply	other threads:[~2021-07-27 23:51 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-27 23:51 Tedd Ho-Jeong An [this message]
2021-07-27 23:51 ` [RFC PATCH v4 01/11] Bluetooth: Add support hdev to allocate private data Tedd Ho-Jeong An
2021-07-28  0:41   ` Luiz Augusto von Dentz
2021-07-29 11:39     ` Marcel Holtmann
2021-07-28  2:11   ` Bluetooth: btintel: Refactoring setup routines bluez.test.bot
2021-07-27 23:51 ` [RFC PATCH v4 02/11] Bluetooth: btintel: Add combined setup and shutdown functions Tedd Ho-Jeong An
2021-07-27 23:51 ` [RFC PATCH v4 03/11] Bluetooth: btintel: Refactoring setup routine for legacy ROM sku Tedd Ho-Jeong An
2021-07-27 23:51 ` [RFC PATCH v4 04/11] Bluetooth: btintel: Add btintel data struct Tedd Ho-Jeong An
2021-07-27 23:51 ` [RFC PATCH v4 05/11] Bluetooth: btintel: Fix the first HCI command not work with ROM device Tedd Ho-Jeong An
2021-07-27 23:51 ` [RFC PATCH v4 06/11] Bluetooth: btintel: Fix the LED is not turning off immediately Tedd Ho-Jeong An
2021-07-27 23:51 ` [RFC PATCH v4 07/11] Bluetooth: btintel: Add combined set_diag functions Tedd Ho-Jeong An
2021-07-27 23:51 ` [RFC PATCH v4 08/11] Bluetooth: btintel: Refactoring setup routine for legacy bootloader Tedd Ho-Jeong An
2021-07-27 23:51 ` [RFC PATCH v4 09/11] Bluetooth: btintel: Refactoring setup routine for TLV based booloader Tedd Ho-Jeong An
2021-07-27 23:51 ` [RFC PATCH v4 10/11] Bluetooth: btintel: Clean the exported function to static Tedd Ho-Jeong An
2021-07-27 23:51 ` [RFC PATCH v4 11/11] Bluetooth: btintel: Fix the legacy bootloader returns tlv based version Tedd Ho-Jeong An
2021-07-28  0:17 ` [RFC PATCH v4 00/11] Bluetooth: btintel: Refactoring setup routines An, Tedd

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210727235127.173149-1-hj.tedd.an@gmail.com \
    --to=hj.tedd.an@gmail.com \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=tedd.an@intel.com \
    --subject='Re: [RFC PATCH v4 00/11] Bluetooth: btintel: Refactoring setup routines' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).