[PATCH v1] Bluetooth: hci_qca: Stop collecting memdump again for command timeout during SSR

[PATCH v1] Bluetooth: hci_qca: Stop collecting memdump again for command timeout during SSR

[Venkata Lakshmi Narayana Gubba]

Setting memdump state to idle prior to setting of callback function
pointer for command timeout to NULL,causing the issue.Now moved the
initialisation of memdump state to qca_setup().

Fixes: d841502c79e3 ("Bluetooth: hci_qca: Collect controller memory dump during SSR")
Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
---
 drivers/bluetooth/hci_qca.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 3d13002..20e1ded 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -1668,6 +1668,8 @@ static int qca_setup(struct hci_uart *hu)
 	bt_dev_info(hdev, "setting up %s",
 		qca_is_wcn399x(soc_type) ? "wcn399x" : "ROME/QCA6390");
 
+	qca->memdump_state = QCA_MEMDUMP_IDLE;
+
 retry:
 	ret = qca_power_on(hdev);
 	if (ret)
@@ -1817,9 +1819,6 @@ static void qca_power_shutdown(struct hci_uart *hu)
 	qca_flush(hu);
 	spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
 
-	hu->hdev->hw_error = NULL;
-	hu->hdev->cmd_timeout = NULL;
-
 	/* Non-serdev device usually is powered by external power
 	 * and don't need additional action in driver for power down
 	 */
@@ -1841,6 +1840,9 @@ static int qca_power_off(struct hci_dev *hdev)
 	struct qca_data *qca = hu->priv;
 	enum qca_btsoc_type soc_type = qca_soc_type(hu);
 
+	hu->hdev->hw_error = NULL;
+	hu->hdev->cmd_timeout = NULL;
+
 	/* Stop sending shutdown command if soc crashes. */
 	if (soc_type != QCA_ROME
 		&& qca->memdump_state == QCA_MEMDUMP_IDLE) {
@@ -1848,7 +1850,6 @@ static int qca_power_off(struct hci_dev *hdev)
 		usleep_range(8000, 10000);
 	}
 
-	qca->memdump_state = QCA_MEMDUMP_IDLE;
 	qca_power_shutdown(hu);
 	return 0;
 }
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
of Code Aurora Forum, hosted by The Linux Foundation

Re: [PATCH v1] Bluetooth: hci_qca: Stop collecting memdump again for command timeout during SSR

[Marcel Holtmann]

Hi Venkata,

> Setting memdump state to idle prior to setting of callback function
> pointer for command timeout to NULL,causing the issue.Now moved the
> initialisation of memdump state to qca_setup().
> 
> Fixes: d841502c79e3 ("Bluetooth: hci_qca: Collect controller memory dump during SSR")
> Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
> ---
> drivers/bluetooth/hci_qca.c | 9 +++++----
> 1 file changed, 5 insertions(+), 4 deletions(-)

patch has been applied to bluetooth-next tree.

Regards

Marcel