[PATCH] Bluetooth: btmtksdio: Add in-band wakeup support

From: <sean.wang@mediatek.com>
To: <marcel@holtmann.org>, <johan.hedberg@gmail.com>
Cc: <sean.wang@mediatek.com>, <Soul.Huang@mediatek.com>,
	<YN.Chen@mediatek.com>, <Leon.Yen@mediatek.com>,
	<Eric-SY.Chang@mediatek.com>, <Deren.Wu@mediatek.com>,
	<km.lin@mediatek.com>, <robin.chiu@mediatek.com>,
	<Eddie.Chen@mediatek.com>, <ch.yeh@mediatek.com>,
	<posh.sun@mediatek.com>, <ted.huang@mediatek.com>,
	<Eric.Liang@mediatek.com>, <Stella.Chang@mediatek.com>,
	<Tom.Chou@mediatek.com>, <steve.lee@mediatek.com>,
	<jsiuda@google.com>, <frankgor@google.com>,
	<abhishekpandit@google.com>, <michaelfsun@google.com>,
	<mcchou@chromium.org>, <shawnku@google.com>,
	<linux-bluetooth@vger.kernel.org>,
	<linux-mediatek@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>,
	Yake Yang <yake.yang@mediatek.com>
Subject: [PATCH] Bluetooth: btmtksdio: Add in-band wakeup support
Date: Fri, 10 Jun 2022 08:17:17 +0800	[thread overview]
Message-ID: <742cdffcf110e1601257207fb2b0d3f426d4008c.1654819586.git.objelf@gmail.com> (raw)

From: Sean Wang <sean.wang@mediatek.com>

'ce64b3e94919 ("Bluetooth: mt7921s: Support wake on bluetooth")'
have added the waken-on-bluetooth via dedicated GPIO.

The patch extends the function to the waken-on-bluetooth via SDIO DAT1 pin
(inband wakeup) when the SDIO host driver is able to support.

Co-developed-by: Yake Yang <yake.yang@mediatek.com>
Signed-off-by: Yake Yang <yake.yang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
 drivers/bluetooth/btmtksdio.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/bluetooth/btmtksdio.c b/drivers/bluetooth/btmtksdio.c
index d6700efcfe8c..9ed3af4ba51a 100644
--- a/drivers/bluetooth/btmtksdio.c
+++ b/drivers/bluetooth/btmtksdio.c
@@ -118,6 +118,7 @@ MODULE_DEVICE_TABLE(sdio, btmtksdio_table);
 #define BTMTKSDIO_FUNC_ENABLED		3
 #define BTMTKSDIO_PATCH_ENABLED		4
 #define BTMTKSDIO_HW_RESET_ACTIVE	5
+#define BTMTKSDIO_INBAND_WAKEUP		6
 
 struct mtkbtsdio_hdr {
 	__le16	len;
@@ -1294,6 +1295,9 @@ static bool btmtksdio_sdio_wakeup(struct hci_dev *hdev)
 		.wakeup_delay = cpu_to_le16(0x20),
 	};
 
+	if (test_bit(BTMTKSDIO_INBAND_WAKEUP, &bdev->tx_state))
+		return may_wakeup;
+
 	if (may_wakeup && bdev->data->chipid == 0x7921) {
 		struct sk_buff *skb;
 
@@ -1384,6 +1388,10 @@ static int btmtksdio_probe(struct sdio_func *func,
 	 */
 	pm_runtime_put_noidle(bdev->dev);
 
+	/* Mark if the mmc host can support waken by SDIO */
+	if (device_can_wakeup(func->card->host->parent))
+		set_bit(BTMTKSDIO_INBAND_WAKEUP, &bdev->tx_state);
+
 	err = device_init_wakeup(bdev->dev, true);
 	if (err)
 		bt_dev_err(hdev, "failed to initialize device wakeup");
-- 
2.25.1

