* [PATCH v1] Bluetooth: hci_qca: wait for Pre shutdown to command complete event before sending the Power off pulse
@ 2019-08-08 9:25 Harish Bandi
2019-08-08 10:55 ` Balakrishna Godavarthi
2019-08-08 14:59 ` Matthias Kaehlcke
0 siblings, 2 replies; 5+ messages in thread
From: Harish Bandi @ 2019-08-08 9:25 UTC (permalink / raw)
To: marcel, johan.hedberg
Cc: mka, linux-kernel, linux-bluetooth, hemantg, linux-arm-msm,
bgodavar, anubhavg, Harish Bandi
When SoC receives pre shut down command, it share the same
with other COEX shared clients. So SoC needs a short
time after sending VS pre shutdown command before
turning off the regulators and sending the power off pulse.
Signed-off-by: Harish Bandi <c-hbandi@codeaurora.org>
---
drivers/bluetooth/btqca.c | 5 +++--
drivers/bluetooth/hci_qca.c | 2 ++
2 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
index 2221935..f20991e 100644
--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -106,8 +106,9 @@ int qca_send_pre_shutdown_cmd(struct hci_dev *hdev)
bt_dev_dbg(hdev, "QCA pre shutdown cmd");
- skb = __hci_cmd_sync(hdev, QCA_PRE_SHUTDOWN_CMD, 0,
- NULL, HCI_INIT_TIMEOUT);
+ skb = __hci_cmd_sync_ev(hdev, QCA_PRE_SHUTDOWN_CMD, 0,
+ NULL, HCI_EV_CMD_COMPLETE, HCI_INIT_TIMEOUT);
+
if (IS_ERR(skb)) {
err = PTR_ERR(skb);
bt_dev_err(hdev, "QCA preshutdown_cmd failed (%d)", err);
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 16db6c0..566aa28 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -1386,6 +1386,8 @@ static int qca_power_off(struct hci_dev *hdev)
/* Perform pre shutdown command */
qca_send_pre_shutdown_cmd(hdev);
+ usleep_range(8000, 10000);
+
qca_power_shutdown(hu);
return 0;
}
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v1] Bluetooth: hci_qca: wait for Pre shutdown to command complete event before sending the Power off pulse
2019-08-08 9:25 [PATCH v1] Bluetooth: hci_qca: wait for Pre shutdown to command complete event before sending the Power off pulse Harish Bandi
@ 2019-08-08 10:55 ` Balakrishna Godavarthi
2019-08-09 4:51 ` Harish Bandi
2019-08-08 14:59 ` Matthias Kaehlcke
1 sibling, 1 reply; 5+ messages in thread
From: Balakrishna Godavarthi @ 2019-08-08 10:55 UTC (permalink / raw)
To: Harish Bandi
Cc: marcel, johan.hedberg, mka, linux-kernel, linux-bluetooth,
hemantg, linux-arm-msm, anubhavg
Hi Harish,
On 2019-08-08 14:55, Harish Bandi wrote:
> When SoC receives pre shut down command, it share the same
> with other COEX shared clients. So SoC needs a short
> time after sending VS pre shutdown command before
> turning off the regulators and sending the power off pulse.
>
> Signed-off-by: Harish Bandi <c-hbandi@codeaurora.org>
> ---
> drivers/bluetooth/btqca.c | 5 +++--
> drivers/bluetooth/hci_qca.c | 2 ++
> 2 files changed, 5 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
> index 2221935..f20991e 100644
> --- a/drivers/bluetooth/btqca.c
> +++ b/drivers/bluetooth/btqca.c
> @@ -106,8 +106,9 @@ int qca_send_pre_shutdown_cmd(struct hci_dev *hdev)
>
> bt_dev_dbg(hdev, "QCA pre shutdown cmd");
>
> - skb = __hci_cmd_sync(hdev, QCA_PRE_SHUTDOWN_CMD, 0,
> - NULL, HCI_INIT_TIMEOUT);
> + skb = __hci_cmd_sync_ev(hdev, QCA_PRE_SHUTDOWN_CMD, 0,
> + NULL, HCI_EV_CMD_COMPLETE, HCI_INIT_TIMEOUT);
[Bala]: nit: can you also add reason in commit text for adding
HCI_EV_CMD_COMPLETE
> +
> if (IS_ERR(skb)) {
> err = PTR_ERR(skb);
> bt_dev_err(hdev, "QCA preshutdown_cmd failed (%d)", err);
> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
> index 16db6c0..566aa28 100644
> --- a/drivers/bluetooth/hci_qca.c
> +++ b/drivers/bluetooth/hci_qca.c
> @@ -1386,6 +1386,8 @@ static int qca_power_off(struct hci_dev *hdev)
> /* Perform pre shutdown command */
> qca_send_pre_shutdown_cmd(hdev);
>
> + usleep_range(8000, 10000);
> +
> qca_power_shutdown(hu);
> return 0;
> }
Reviewed-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
--
Regards
Balakrishna.
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v1] Bluetooth: hci_qca: wait for Pre shutdown to command complete event before sending the Power off pulse
2019-08-08 9:25 [PATCH v1] Bluetooth: hci_qca: wait for Pre shutdown to command complete event before sending the Power off pulse Harish Bandi
2019-08-08 10:55 ` Balakrishna Godavarthi
@ 2019-08-08 14:59 ` Matthias Kaehlcke
2019-08-09 5:12 ` Harish Bandi
1 sibling, 1 reply; 5+ messages in thread
From: Matthias Kaehlcke @ 2019-08-08 14:59 UTC (permalink / raw)
To: Harish Bandi
Cc: marcel, johan.hedberg, linux-kernel, linux-bluetooth, hemantg,
linux-arm-msm, bgodavar, anubhavg
On Thu, Aug 08, 2019 at 02:55:53PM +0530, Harish Bandi wrote:
> When SoC receives pre shut down command, it share the same
> with other COEX shared clients. So SoC needs a short
> time after sending VS pre shutdown command before
> turning off the regulators and sending the power off pulse.
>
> Signed-off-by: Harish Bandi <c-hbandi@codeaurora.org>
> ---
> drivers/bluetooth/btqca.c | 5 +++--
> drivers/bluetooth/hci_qca.c | 2 ++
> 2 files changed, 5 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
> index 2221935..f20991e 100644
> --- a/drivers/bluetooth/btqca.c
> +++ b/drivers/bluetooth/btqca.c
> @@ -106,8 +106,9 @@ int qca_send_pre_shutdown_cmd(struct hci_dev *hdev)
>
> bt_dev_dbg(hdev, "QCA pre shutdown cmd");
>
> - skb = __hci_cmd_sync(hdev, QCA_PRE_SHUTDOWN_CMD, 0,
> - NULL, HCI_INIT_TIMEOUT);
> + skb = __hci_cmd_sync_ev(hdev, QCA_PRE_SHUTDOWN_CMD, 0,
> + NULL, HCI_EV_CMD_COMPLETE, HCI_INIT_TIMEOUT);
> +
The commit message does not mention this change, it only talks about
adding a delay.
> if (IS_ERR(skb)) {
> err = PTR_ERR(skb);
> bt_dev_err(hdev, "QCA preshutdown_cmd failed (%d)", err);
> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
> index 16db6c0..566aa28 100644
> --- a/drivers/bluetooth/hci_qca.c
> +++ b/drivers/bluetooth/hci_qca.c
> @@ -1386,6 +1386,8 @@ static int qca_power_off(struct hci_dev *hdev)
> /* Perform pre shutdown command */
> qca_send_pre_shutdown_cmd(hdev);
>
> + usleep_range(8000, 10000);
> +
> qca_power_shutdown(hu);
> return 0;
> }
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v1] Bluetooth: hci_qca: wait for Pre shutdown to command complete event before sending the Power off pulse
2019-08-08 10:55 ` Balakrishna Godavarthi
@ 2019-08-09 4:51 ` Harish Bandi
0 siblings, 0 replies; 5+ messages in thread
From: Harish Bandi @ 2019-08-09 4:51 UTC (permalink / raw)
To: Balakrishna Godavarthi
Cc: marcel, johan.hedberg, mka, linux-kernel, linux-bluetooth,
hemantg, linux-arm-msm, anubhavg
Hi Bala,
On 2019-08-08 16:25, Balakrishna Godavarthi wrote:
> Hi Harish,
>
> On 2019-08-08 14:55, Harish Bandi wrote:
>> When SoC receives pre shut down command, it share the same
>> with other COEX shared clients. So SoC needs a short
>> time after sending VS pre shutdown command before
>> turning off the regulators and sending the power off pulse.
>>
>> Signed-off-by: Harish Bandi <c-hbandi@codeaurora.org>
>> ---
>> drivers/bluetooth/btqca.c | 5 +++--
>> drivers/bluetooth/hci_qca.c | 2 ++
>> 2 files changed, 5 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
>> index 2221935..f20991e 100644
>> --- a/drivers/bluetooth/btqca.c
>> +++ b/drivers/bluetooth/btqca.c
>> @@ -106,8 +106,9 @@ int qca_send_pre_shutdown_cmd(struct hci_dev
>> *hdev)
>>
>> bt_dev_dbg(hdev, "QCA pre shutdown cmd");
>>
>> - skb = __hci_cmd_sync(hdev, QCA_PRE_SHUTDOWN_CMD, 0,
>> - NULL, HCI_INIT_TIMEOUT);
>> + skb = __hci_cmd_sync_ev(hdev, QCA_PRE_SHUTDOWN_CMD, 0,
>> + NULL, HCI_EV_CMD_COMPLETE, HCI_INIT_TIMEOUT);
>
> [Bala]: nit: can you also add reason in commit text for adding
> HCI_EV_CMD_COMPLETE
[Harish] - I will add reason fo HCI_EV_CMD_COMPLETE in commit text and
post new patch.
>
>> +
>> if (IS_ERR(skb)) {
>> err = PTR_ERR(skb);
>> bt_dev_err(hdev, "QCA preshutdown_cmd failed (%d)", err);
>> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
>> index 16db6c0..566aa28 100644
>> --- a/drivers/bluetooth/hci_qca.c
>> +++ b/drivers/bluetooth/hci_qca.c
>> @@ -1386,6 +1386,8 @@ static int qca_power_off(struct hci_dev *hdev)
>> /* Perform pre shutdown command */
>> qca_send_pre_shutdown_cmd(hdev);
>>
>> + usleep_range(8000, 10000);
>> +
>> qca_power_shutdown(hu);
>> return 0;
>> }
>
> Reviewed-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
Thanks,
Harish
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v1] Bluetooth: hci_qca: wait for Pre shutdown to command complete event before sending the Power off pulse
2019-08-08 14:59 ` Matthias Kaehlcke
@ 2019-08-09 5:12 ` Harish Bandi
0 siblings, 0 replies; 5+ messages in thread
From: Harish Bandi @ 2019-08-09 5:12 UTC (permalink / raw)
To: Matthias Kaehlcke
Cc: marcel, johan.hedberg, linux-kernel, linux-bluetooth, hemantg,
linux-arm-msm, bgodavar, anubhavg
Hi Matthias,
On 2019-08-08 20:29, Matthias Kaehlcke wrote:
> On Thu, Aug 08, 2019 at 02:55:53PM +0530, Harish Bandi wrote:
>> When SoC receives pre shut down command, it share the same
>> with other COEX shared clients. So SoC needs a short
>> time after sending VS pre shutdown command before
>> turning off the regulators and sending the power off pulse.
>>
>> Signed-off-by: Harish Bandi <c-hbandi@codeaurora.org>
>> ---
>> drivers/bluetooth/btqca.c | 5 +++--
>> drivers/bluetooth/hci_qca.c | 2 ++
>> 2 files changed, 5 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
>> index 2221935..f20991e 100644
>> --- a/drivers/bluetooth/btqca.c
>> +++ b/drivers/bluetooth/btqca.c
>> @@ -106,8 +106,9 @@ int qca_send_pre_shutdown_cmd(struct hci_dev
>> *hdev)
>>
>> bt_dev_dbg(hdev, "QCA pre shutdown cmd");
>>
>> - skb = __hci_cmd_sync(hdev, QCA_PRE_SHUTDOWN_CMD, 0,
>> - NULL, HCI_INIT_TIMEOUT);
>> + skb = __hci_cmd_sync_ev(hdev, QCA_PRE_SHUTDOWN_CMD, 0,
>> + NULL, HCI_EV_CMD_COMPLETE, HCI_INIT_TIMEOUT);
>> +
>
> The commit message does not mention this change, it only talks about
> adding a delay.
[Harish] - I will add reason fo HCI_EV_CMD_COMPLETE in commit text and
post new patch.
In commit text title I mentioned about command complete event, However I
will add more details
about reason for command complete in commit text
>
>> if (IS_ERR(skb)) {
>> err = PTR_ERR(skb);
>> bt_dev_err(hdev, "QCA preshutdown_cmd failed (%d)", err);
>> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
>> index 16db6c0..566aa28 100644
>> --- a/drivers/bluetooth/hci_qca.c
>> +++ b/drivers/bluetooth/hci_qca.c
>> @@ -1386,6 +1386,8 @@ static int qca_power_off(struct hci_dev *hdev)
>> /* Perform pre shutdown command */
>> qca_send_pre_shutdown_cmd(hdev);
>>
>> + usleep_range(8000, 10000);
>> +
>> qca_power_shutdown(hu);
>> return 0;
>> }
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2019-08-09 5:12 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-08-08 9:25 [PATCH v1] Bluetooth: hci_qca: wait for Pre shutdown to command complete event before sending the Power off pulse Harish Bandi
2019-08-08 10:55 ` Balakrishna Godavarthi
2019-08-09 4:51 ` Harish Bandi
2019-08-08 14:59 ` Matthias Kaehlcke
2019-08-09 5:12 ` Harish Bandi
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).