From: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
To: Kiran K <kiran.k@intel.com>
Cc: "linux-bluetooth@vger.kernel.org" <linux-bluetooth@vger.kernel.org>
Subject: Re: [PATCH v10 08/10] Bluetooth: Add support for HCI_Enhanced_Setup_Synchronous_Connection command
Date: Wed, 30 Jun 2021 13:39:04 -0700 [thread overview]
Message-ID: <CABBYNZ+p=vYj0daHwn+L6tTDGfYyhtkMJCyY1fzdFGFohtP9gA@mail.gmail.com> (raw)
In-Reply-To: <20210630080807.12600-8-kiran.k@intel.com>
Hi Kiran,
On Wed, Jun 30, 2021 at 1:06 AM Kiran K <kiran.k@intel.com> wrote:
>
> < HCI Command: Enhanced Setup Synchronous Connection (0x01|0x003d) plen 59
> Handle: 256
> Transmit bandwidth: 8000
> Receive bandwidth: 8000
> Max latency: 13
> Packet type: 0x0380
> 3-EV3 may not be used
> 2-EV5 may not be used
> 3-EV5 may not be used
> Retransmission effort: Optimize for link quality (0x02)
> > HCI Event: Command Status (0x0f) plen 4
> Enhanced Setup Synchronous Connection (0x01|0x003d) ncmd 1
> Status: Success (0x00)
> > HCI Event: Synchronous Connect Complete (0x2c) plen 17
> Status: Success (0x00)
> Handle: 257
> Address: CC:98:8B:92:04:FD (SONY Visual Products Inc.)
> Link type: eSCO (0x02)
> Transmission interval: 0x0c
> Retransmission window: 0x06
> RX packet length: 60
> TX packet length: 60
> Air mode: Transparent (0x03)
>
> Signed-off-by: Kiran K <kiran.k@intel.com>
> Reviewed-by: Chethan T N <chethan.tumkur.narayan@intel.com>
> Reviewed-by: Srivatsa Ravishankar <ravishankar.srivatsa@intel.com>
> ---
> * changes in v10:
> - Fix typos and remove unwanted chunks
> * changes in v9:
> - Fix review comments, use bt_dev_dbg instead of BT_DBG
>
> include/net/bluetooth/bluetooth.h | 3 +-
> include/net/bluetooth/hci.h | 34 ++++++++++
> include/net/bluetooth/hci_core.h | 7 +-
> net/bluetooth/hci_conn.c | 106 ++++++++++++++++++++++++++++--
> net/bluetooth/hci_event.c | 48 +++++++++++++-
> net/bluetooth/sco.c | 13 +++-
> 6 files changed, 201 insertions(+), 10 deletions(-)
>
> diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h
> index 0e8802d09068..af2809121571 100644
> --- a/include/net/bluetooth/bluetooth.h
> +++ b/include/net/bluetooth/bluetooth.h
> @@ -173,7 +173,8 @@ struct bt_codecs {
> struct bt_codec codecs[];
> } __packed;
>
> -#define CODING_FORMAT_CVSD 0x02
> +#define CODING_FORMAT_CVSD 0x02
> +#define CODING_FORMAT_TRANSPARENT 0x03
>
> __printf(1, 2)
> void bt_info(const char *fmt, ...);
> diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
> index ae384b7bf000..e20318854900 100644
> --- a/include/net/bluetooth/hci.h
> +++ b/include/net/bluetooth/hci.h
> @@ -871,6 +871,40 @@ struct hci_cp_logical_link_cancel {
> __u8 flow_spec_id;
> } __packed;
>
> +#define HCI_OP_ENHANCED_SETUP_SYNC_CONN 0x043D
> +struct hci_coding_format {
> + __u8 id;
> + __le16 cid;
> + __le16 vid;
> +} __packed;
> +
> +struct hci_cp_enhanced_setup_sync_conn {
> + __le16 handle;
> + __le32 tx_bandwidth;
> + __le32 rx_bandwidth;
> + struct hci_coding_format tx_coding_format;
> + struct hci_coding_format rx_coding_format;
> + __le16 tx_codec_frame_size;
> + __le16 rx_codec_frame_size;
> + __le32 in_bandwidth;
> + __le32 out_bandwidth;
> + struct hci_coding_format in_coding_format;
> + struct hci_coding_format out_coding_format;
> + __le16 in_coded_data_size;
> + __le16 out_coded_data_size;
> + __u8 in_pcm_data_format;
> + __u8 out_pcm_data_format;
> + __u8 in_pcm_sample_payload_msb_pos;
> + __u8 out_pcm_sample_payload_msb_pos;
> + __u8 in_data_path;
> + __u8 out_data_path;
> + __u8 in_transport_unit_size;
> + __u8 out_transport_unit_size;
> + __le16 max_latency;
> + __le16 pkt_type;
> + __u8 retrans_effort;
> +} __packed;
> +
> struct hci_rp_logical_link_cancel {
> __u8 status;
> __u8 phy_handle;
> diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
> index ebf42a3ac6cd..80ed81fb1883 100644
> --- a/include/net/bluetooth/hci_core.h
> +++ b/include/net/bluetooth/hci_core.h
> @@ -719,6 +719,7 @@ struct hci_conn {
> struct amp_mgr *amp_mgr;
>
> struct hci_conn *link;
> + struct bt_codec codec;
>
> void (*connect_cfm_cb) (struct hci_conn *conn, u8 status);
> void (*security_cfm_cb) (struct hci_conn *conn, u8 status);
> @@ -1101,6 +1102,7 @@ static inline struct hci_conn *hci_lookup_le_connect(struct hci_dev *hdev)
>
> int hci_disconnect(struct hci_conn *conn, __u8 reason);
> bool hci_setup_sync(struct hci_conn *conn, __u16 handle);
> +bool hci_enhanced_setup_sync(struct hci_conn *conn, __u16 handle);
> void hci_sco_setup(struct hci_conn *conn, __u8 status);
>
> struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type, bdaddr_t *dst,
> @@ -1125,7 +1127,7 @@ struct hci_conn *hci_connect_acl(struct hci_dev *hdev, bdaddr_t *dst,
> u8 sec_level, u8 auth_type,
> enum conn_reasons conn_reason);
> struct hci_conn *hci_connect_sco(struct hci_dev *hdev, int type, bdaddr_t *dst,
> - __u16 setting);
> + __u16 setting, struct bt_codec *codec);
> int hci_conn_check_link_mode(struct hci_conn *conn);
> int hci_conn_check_secure(struct hci_conn *conn, __u8 sec_level);
> int hci_conn_security(struct hci_conn *conn, __u8 sec_level, __u8 auth_type,
> @@ -1446,6 +1448,9 @@ void hci_conn_del_sysfs(struct hci_conn *conn);
> /* Use LL Privacy based address resolution if supported */
> #define use_ll_privacy(dev) ((dev)->le_features[0] & HCI_LE_LL_PRIVACY)
>
> +/* Use enhanced synchronous connection if command is supported */
> +#define use_enhanced_sco_conn(dev) ((dev)->commands[29] & 0x08)
> +
> /* Use ext scanning if set ext scan param and ext scan enable is supported */
> #define use_ext_scan(dev) (((dev)->commands[37] & 0x20) && \
> ((dev)->commands[37] & 0x40))
> diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
> index 2b5059a56cda..d4a08b344ad0 100644
> --- a/net/bluetooth/hci_conn.c
> +++ b/net/bluetooth/hci_conn.c
> @@ -307,6 +307,96 @@ static bool find_next_esco_param(struct hci_conn *conn,
> return conn->attempt <= size;
> }
>
> +bool hci_enhanced_setup_sync(struct hci_conn *conn, __u16 handle)
> +{
> + struct hci_dev *hdev = conn->hdev;
> + struct hci_cp_enhanced_setup_sync_conn cp;
> + const struct sco_param *param;
> +
> + bt_dev_dbg(hdev, "hcon %p", conn);
> +
> + conn->state = BT_CONNECT;
> + conn->out = true;
> +
> + conn->attempt++;
> +
> + memset(&cp, 0x00, sizeof(cp));
> +
> + cp.handle = cpu_to_le16(handle);
> +
> + cp.tx_bandwidth = cpu_to_le32(0x00001f40);
> + cp.rx_bandwidth = cpu_to_le32(0x00001f40);
> +
> + switch (conn->codec.id) {
> + case CODING_FORMAT_TRANSPARENT:
> + if (!find_next_esco_param(conn, esco_param_msbc,
> + ARRAY_SIZE(esco_param_msbc)))
> + return false;
> + param = &esco_param_msbc[conn->attempt - 1];
> + cp.tx_coding_format.id = 0x03;
> + cp.rx_coding_format.id = 0x03;
> + cp.tx_codec_frame_size = __cpu_to_le16(60);
> + cp.rx_codec_frame_size = __cpu_to_le16(60);
> + cp.in_bandwidth = __cpu_to_le32(0x1f40);
> + cp.out_bandwidth = __cpu_to_le32(0x1f40);
> + cp.in_coding_format.id = 0x03;
> + cp.out_coding_format.id = 0x03;
> + cp.in_coded_data_size = __cpu_to_le16(16);
> + cp.out_coded_data_size = __cpu_to_le16(16);
> + cp.in_pcm_data_format = 2;
> + cp.out_pcm_data_format = 2;
> + cp.in_pcm_sample_payload_msb_pos = 0;
> + cp.out_pcm_sample_payload_msb_pos = 0;
> + cp.in_data_path = conn->codec.data_path;
> + cp.out_data_path = conn->codec.data_path;
> + cp.in_transport_unit_size = 1;
> + cp.out_transport_unit_size = 1;
> + break;
> +
> + case CODING_FORMAT_CVSD:
> + if (lmp_esco_capable(conn->link)) {
> + if (!find_next_esco_param(conn, esco_param_cvsd,
> + ARRAY_SIZE(esco_param_cvsd)))
> + return false;
> + param = &esco_param_cvsd[conn->attempt - 1];
> + } else {
> + if (conn->attempt > ARRAY_SIZE(sco_param_cvsd))
> + return false;
> + param = &sco_param_cvsd[conn->attempt - 1];
> + }
> + cp.tx_coding_format.id = 2;
> + cp.rx_coding_format.id = 2;
> + cp.tx_codec_frame_size = __cpu_to_le16(60);
> + cp.rx_codec_frame_size = __cpu_to_le16(60);
> + cp.in_bandwidth = __cpu_to_le32(16000);
> + cp.out_bandwidth = __cpu_to_le32(16000);
> + cp.in_coding_format.id = 4;
> + cp.out_coding_format.id = 4;
> + cp.in_coded_data_size = __cpu_to_le16(16);
> + cp.out_coded_data_size = __cpu_to_le16(16);
> + cp.in_pcm_data_format = 2;
> + cp.out_pcm_data_format = 2;
> + cp.in_pcm_sample_payload_msb_pos = 0;
> + cp.out_pcm_sample_payload_msb_pos = 0;
> + cp.in_data_path = conn->codec.data_path;
> + cp.out_data_path = conn->codec.data_path;
> + cp.in_transport_unit_size = 16;
> + cp.out_transport_unit_size = 16;
> + break;
> + default:
> + return false;
> + }
> +
> + cp.retrans_effort = param->retrans_effort;
> + cp.pkt_type = __cpu_to_le16(param->pkt_type);
> + cp.max_latency = __cpu_to_le16(param->max_latency);
> +
> + if (hci_send_cmd(hdev, HCI_OP_ENHANCED_SETUP_SYNC_CONN, sizeof(cp), &cp) < 0)
> + return false;
> +
> + return true;
> +}
> +
> bool hci_setup_sync(struct hci_conn *conn, __u16 handle)
> {
> struct hci_dev *hdev = conn->hdev;
> @@ -424,10 +514,14 @@ void hci_sco_setup(struct hci_conn *conn, __u8 status)
> BT_DBG("hcon %p", conn);
>
> if (!status) {
> - if (lmp_esco_capable(conn->hdev))
> - hci_setup_sync(sco, conn->handle);
> - else
> + if (lmp_esco_capable(conn->hdev)) {
> + if (use_enhanced_sco_conn(conn->hdev))
> + hci_enhanced_setup_sync(sco, conn->handle);
> + else
> + hci_setup_sync(sco, conn->handle);
Make the check for use_enhanced_sco_conn inside hci_setup_sync and
then call it internally there so we don't have to check it in multiple
places (afaik we normally use _capable for this sort of macros). Btw
since the use of enhanced version won't be conditional to the new
Kconfig you must enable it in the emulator so it can be exercised by
the CI, also Id just send this one separately alongside the changes to
enable it on the emulator.
> + } else {
> hci_add_sco(sco, conn->handle);
> + }
> } else {
> hci_connect_cfm(sco, status);
> hci_conn_del(sco);
> @@ -1319,7 +1413,7 @@ struct hci_conn *hci_connect_acl(struct hci_dev *hdev, bdaddr_t *dst,
> }
>
> struct hci_conn *hci_connect_sco(struct hci_dev *hdev, int type, bdaddr_t *dst,
> - __u16 setting)
> + __u16 setting, struct bt_codec *codec)
> {
> struct hci_conn *acl;
> struct hci_conn *sco;
> @@ -1344,6 +1438,10 @@ struct hci_conn *hci_connect_sco(struct hci_dev *hdev, int type, bdaddr_t *dst,
> hci_conn_hold(sco);
>
> sco->setting = setting;
> + sco->codec.id = codec->id;
> + sco->codec.cid = codec->cid;
> + sco->codec.vid = codec->vid;
> + sco->codec.data_path = codec->data_path;
>
> if (acl->state == BT_CONNECTED &&
> (sco->state == BT_OPEN || sco->state == BT_CLOSED)) {
> diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
> index 1c3018202564..a021f29f12ad 100644
> --- a/net/bluetooth/hci_event.c
> +++ b/net/bluetooth/hci_event.c
> @@ -2236,6 +2236,41 @@ static void hci_cs_setup_sync_conn(struct hci_dev *hdev, __u8 status)
> hci_dev_unlock(hdev);
> }
>
> +static void hci_cs_enhanced_setup_sync_conn(struct hci_dev *hdev, __u8 status)
> +{
> + struct hci_cp_enhanced_setup_sync_conn *cp;
> + struct hci_conn *acl, *sco;
> + __u16 handle;
> +
> + bt_dev_dbg(hdev, "status 0x%2.2x", status);
> +
> + if (!status)
> + return;
> +
> + cp = hci_sent_cmd_data(hdev, HCI_OP_ENHANCED_SETUP_SYNC_CONN);
> + if (!cp)
> + return;
> +
> + handle = __le16_to_cpu(cp->handle);
> +
> + bt_dev_dbg(hdev, "handle 0x%4.4x", handle);
> +
> + hci_dev_lock(hdev);
> +
> + acl = hci_conn_hash_lookup_handle(hdev, handle);
> + if (acl) {
> + sco = acl->link;
> + if (sco) {
> + sco->state = BT_CLOSED;
> +
> + hci_connect_cfm(sco, status);
> + hci_conn_del(sco);
> + }
> + }
> +
> + hci_dev_unlock(hdev);
> +}
> +
> static void hci_cs_sniff_mode(struct hci_dev *hdev, __u8 status)
> {
> struct hci_cp_sniff_mode *cp;
> @@ -3715,6 +3750,10 @@ static void hci_cmd_status_evt(struct hci_dev *hdev, struct sk_buff *skb,
> hci_cs_setup_sync_conn(hdev, ev->status);
> break;
>
> + case HCI_OP_ENHANCED_SETUP_SYNC_CONN:
> + hci_cs_enhanced_setup_sync_conn(hdev, ev->status);
> + break;
> +
> case HCI_OP_SNIFF_MODE:
> hci_cs_sniff_mode(hdev, ev->status);
> break;
> @@ -4401,8 +4440,13 @@ static void hci_sync_conn_complete_evt(struct hci_dev *hdev,
> if (conn->out) {
> conn->pkt_type = (hdev->esco_type & SCO_ESCO_MASK) |
> (hdev->esco_type & EDR_ESCO_MASK);
> - if (hci_setup_sync(conn, conn->link->handle))
> - goto unlock;
> + if (use_enhanced_sco_conn(hdev)) {
> + if (hci_enhanced_setup_sync(conn, conn->link->handle))
> + goto unlock;
> + } else {
> + if (hci_setup_sync(conn, conn->link->handle))
> + goto unlock;
> + }
> }
> fallthrough;
>
> diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c
> index 4b6ee0b302d7..b44d56eb936a 100644
> --- a/net/bluetooth/sco.c
> +++ b/net/bluetooth/sco.c
> @@ -240,7 +240,7 @@ static int sco_connect(struct sock *sk)
> }
>
> hcon = hci_connect_sco(hdev, type, &sco_pi(sk)->dst,
> - sco_pi(sk)->setting);
> + sco_pi(sk)->setting, &sco_pi(sk)->codec);
> if (IS_ERR(hcon)) {
> err = PTR_ERR(hcon);
> goto done;
> @@ -876,9 +876,9 @@ static int sco_sock_setsockopt(struct socket *sock, int level, int optname,
> u32 opt;
> #if IS_ENABLED(CONFIG_BT_OFFLOAD_CODECS)
> struct bt_codecs *codecs;
> - struct hci_dev *hdev;
> __u8 buffer[255];
> #endif
> + struct hci_dev *hdev;
>
> BT_DBG("sk %p", sk);
>
> @@ -926,6 +926,15 @@ static int sco_sock_setsockopt(struct socket *sock, int level, int optname,
> }
>
> sco_pi(sk)->setting = voice.setting;
> + hdev = hci_get_route(&sco_pi(sk)->dst, &sco_pi(sk)->src,
> + BDADDR_BREDR);
> + if (!hdev) {
> + err = -EBADFD;
> + break;
> + }
> + if (use_enhanced_sco_conn(hdev) &&
> + voice.setting == BT_VOICE_TRANSPARENT)
> + sco_pi(sk)->codec.id = CODING_FORMAT_TRANSPARENT;
> break;
>
> case BT_PKT_STATUS:
> --
> 2.17.1
>
--
Luiz Augusto von Dentz
next prev parent reply other threads:[~2021-06-30 20:39 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-30 8:07 [PATCH v10 01/10] Bluetooth: Enumerate local supported codec and cache details Kiran K
2021-06-30 8:07 ` [PATCH v10 02/10] Bluetooth: Add support for Read Local Supported Codecs V2 Kiran K
2021-06-30 8:08 ` [PATCH v10 03/10] Bluetooth: btintel: Read supported offload usecases Kiran K
2021-06-30 8:08 ` [PATCH v10 04/10] Bluetooth: Allow querying of supported offload codecs over SCO socket Kiran K
2021-06-30 8:08 ` [PATCH v10 05/10] Bluetooth: btintel: Define callback to fetch data_path_id Kiran K
2021-06-30 8:08 ` [PATCH v10 06/10] Bluetooth: Allow setting of codec for HFP offload usecase Kiran K
2021-06-30 8:08 ` [PATCH v10 07/10] Bluetooth: btintel: Define a callback to fetch codec config data Kiran K
2021-06-30 8:08 ` [PATCH v10 08/10] Bluetooth: Add support for HCI_Enhanced_Setup_Synchronous_Connection command Kiran K
2021-06-30 20:39 ` Luiz Augusto von Dentz [this message]
2021-07-27 7:19 ` K, Kiran
2021-06-30 8:08 ` [PATCH v10 09/10] Bluetooth: Add support for msbc coding format Kiran K
2021-06-30 8:08 ` [PATCH v10 10/10] Bluetooth: Add offload feature under experimental flag Kiran K
2021-06-30 19:56 ` Luiz Augusto von Dentz
2021-07-22 14:01 ` Marcel Holtmann
2021-07-22 17:42 ` Luiz Augusto von Dentz
2021-07-22 17:59 ` Marcel Holtmann
2021-07-22 18:07 ` Luiz Augusto von Dentz
2021-07-22 18:50 ` Marcel Holtmann
2021-07-27 7:21 ` K, Kiran
2021-06-30 9:12 ` [v10,01/10] Bluetooth: Enumerate local supported codec and cache details bluez.test.bot
2021-06-30 20:15 ` [PATCH v10 01/10] " Luiz Augusto von Dentz
2021-07-27 6:56 ` K, Kiran
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CABBYNZ+p=vYj0daHwn+L6tTDGfYyhtkMJCyY1fzdFGFohtP9gA@mail.gmail.com' \
--to=luiz.dentz@gmail.com \
--cc=kiran.k@intel.com \
--cc=linux-bluetooth@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).