linux-bluetooth.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Peter Höller" <drmedvet.hoeller@gmail.com>
To: linux-bluetooth@vger.kernel.org
Subject: Instable BLE connection - MTU Request, Attribute not found
Date: Mon, 26 Jul 2021 12:56:24 +0200	[thread overview]
Message-ID: <CAJgPF1JTyqom8YJSNPx5-5uecZZKwks1gnAotzwJUhz57nSpLw@mail.gmail.com> (raw)
In-Reply-To: <CAJgPF1JLw40nRXyoXyuGd9hNLWCDeD4ONVM7S_CSE9wQg3gvyA@mail.gmail.com>

Hello!

My name is peter. This is probably a bit off topic but:
Since about 2 years I am working ambitiously on connecting a GoPro to
an Odroid via HTTP, UDP and BLE in order to get a powerful node-red
controlled dashcam/balckbox for my cars (fleet control).
(please see: https://github.com/cepoon/GoProRemote,
https://github.com/KonradIT/goprowifihack,
https://github.com/sepp89117/GoPro-Multiple-Smart-Remote-ESP8266)

However I stumbled over a thread: #96, which's owner forwarded me to
your mailing list as my last resort:

and figured that you are deep into debugging of BLE connections.

because of our long developement period we are "stuck" in a somewhat
older hardware/kernel  config, unfortunately:

Odroid C2 with BluetoothModule2 (CSR8510 A10)
Ubuntu 18.04 (Kernel 3.16.85+)
WifiModule 5A (concurrent mode (STA+Client) on hostapd 2.9)
Bluez 5.53
btusb 0.7
(- GoPro Hero5 black)

However, we do suffer from an comparable annoying problem since more
than a year(!). We do have an unstable BLE Connection between Dongle
and Gopro. When just paired, the first connection stays up for about
30mins (abortion the is not btmon-itored yet, but can be done), but
the reconnect is a problem: gets connected but after 2 - 15 sec:
disconnect. Mainly because of:

#Issue 1: (btmon) Why is it disconnecting after MTU request?
@ Discovering: 0x00 (6)

HCI Event: Command Status (0x0f) plen 4 #111 [hci0] 55.051270
LE Create Connection (0x08|0x000d) ncmd 1
Status: Success (0x00)
HCI Event: LE Meta Event (0x3e) plen 19 #112 [hci0] 55.626431
LE Connection Complete (0x01)
Status: Success (0x00)
Handle: 71
Role: Master (0x00)
Peer address type: Random (0x01)
Peer address: C9:0F:D9:47:48:B4 (Static)
Connection interval: 70.00 msec (0x0038)
Connection latency: 0 (0x0000)
Supervision timeout: 420 msec (0x002a)
Master clock accuracy: 0x00
@ Device Connected: C9:0F:D9:47:48:B4 (2) flags 0x0000
<< ACL Data TX: Handle 71 flags 0x00 dlen 7 #113 [hci0] 55.627789
ATT: Exchange MTU Request (0x02) len 2
Client RX MTU: 517
HCI Event: Disconnect Complete (0x05) plen 4 #114 [hci0] 56.035562
Status: Success (0x00)
Handle: 71
Reason: Connection Failed to be Established (0x3e)
@ Device Disconnected: C9:0F:D9:47:48:B4 (2) reason 0

#issue 2: btmon: Error: Timeout/ Disconnect after attribute not
found!? (main issue obviously)
@ Discovering: 0x00 (6)
<< HCI Command: LE Create Connect.. (0x08|0x000d) plen 25 #102 [hci0] 21.277573
Scan interval: 60.000 msec (0x0060)
Scan window: 30.000 msec (0x0030)
Filter policy: White list is not used (0x00)
Peer address type: Random (0x01)
Peer address: C9:0F:D9:47:48:B4 (Static)
Own address type: Public (0x00)
Min connection interval: 50.00 msec (0x0028)
Max connection interval: 70.00 msec (0x0038)
Connection latency: 0 (0x0000)
Supervision timeout: 420 msec (0x002a)
Min connection length: 0.000 msec (0x0000)
Max connection length: 0.000 msec (0x0000)

HCI Event: Command Status (0x0f) plen 4 #103 [hci0] 21.281234
LE Create Connection (0x08|0x000d) ncmd 1
Status: Success (0x00)
HCI Event: LE Meta Event (0x3e) plen 19 #104 [hci0] 21.474300
LE Connection Complete (0x01)
Status: Success (0x00)
Handle: 71
Role: Master (0x00)
Peer address type: Random (0x01)
Peer address: C9:0F:D9:47:48:B4 (Static)
Connection interval: 70.00 msec (0x0038)
Connection latency: 0 (0x0000)
Supervision timeout: 420 msec (0x002a)
Master clock accuracy: 0x00
@ Device Connected: C9:0F:D9:47:48:B4 (2) flags 0x0000
<< ACL Data TX: Handle 71 flags 0x00 dlen 7 #105 [hci0] 21.475604
ATT: Exchange MTU Request (0x02) len 2
Client RX MTU: 517
HCI Event: Number of Completed Packets (0x13) plen 5 #106 [hci0] 21.786387
Num handles: 1
Handle: 71
Count: 1
ACL Data RX: Handle 71 flags 0x02 dlen 7 #107 [hci0] 21.849441
ATT: Exchange MTU Response (0x03) len 2
Server RX MTU: 517
<< ACL Data TX: Handle 71 flags 0x00 dlen 7 #108 [hci0] 21.849849
ATT: Read Request (0x0a) len 2
Handle: 0x0004
HCI Event: Number of Completed Packets (0x13) plen 5 #109 [hci0] 21.919448
Num handles: 1
Handle: 71
Count: 1
ACL Data RX: Handle 71 flags 0x02 dlen 15 #110 [hci0] 21.989485
ATT: Read Response (0x0b) len 10
Value: 476f50726f2038353339
<< ACL Data TX: Handle 71 flags 0x00 dlen 7 #111 [hci0] 21.989865
ATT: Read Request (0x0a) len 2
Handle: 0x0006
HCI Event: Number of Completed Packets (0x13) plen 5 #112 [hci0] 22.059476
Num handles: 1
Handle: 71
Count: 1
ACL Data RX: Handle 71 flags 0x02 dlen 7 #113 [hci0] 22.135894
ATT: Read Response (0x0b) len 2
Value: 8000
<< ACL Data TX: Handle 71 flags 0x00 dlen 7 #114 [hci0] 22.136253
ATT: Read Request (0x0a) len 2
Handle: 0x000e
HCI Event: Number of Completed Packets (0x13) plen 5 #115 [hci0] 22.199508
Num handles: 1
Handle: 71
Count: 1
ACL Data RX: Handle 71 flags 0x02 dlen 6 #116 [hci0] 22.269695
ATT: Read Response (0x0b) len 1
Value: 05
<< ACL Data TX: Handle 71 flags 0x00 dlen 7 #117 [hci0] 22.270106
ATT: Read Request (0x0a) len 2
Handle: 0x0020
HCI Event: Number of Completed Packets (0x13) plen 5 #118 [hci0] 22.339554
Num handles: 1
Handle: 71
Count: 1
ACL Data RX: Handle 71 flags 0x02 dlen 12 #119 [hci0] 22.409721
ATT: Read Response (0x0b) len 7
Value: 00000000000000
<< ACL Data TX: Handle 71 flags 0x00 dlen 11 #120 [hci0] 22.410113
ATT: Read By Group Type Request (0x10) len 6
Handle range: 0x0001-0xffff
Attribute group type: Primary Service (0x2800)
HCI Event: Number of Completed Packets (0x13) plen 5 #121 [hci0] 22.479592
Num handles: 1
Handle: 71
Count: 1
ACL Data RX: Handle 71 flags 0x02 dlen 27 #122 [hci0] 22.549760
ACL Data RX: Handle 71 flags 0x01 dlen 9 #123 [hci0] 22.551041
ATT: Read By Group Type Response (0x11) len 31
Attribute data length: 6
Attribute group list: 5 entries
Handle range: 0x0001-0x0001
UUID: Generic Attribute Profile (0x1801)
Handle range: 0x0002-0x0008
UUID: Generic Access Profile (0x1800)
Handle range: 0x0009-0x000b
UUID: Tx Power (0x1804)
Handle range: 0x000c-0x000f
UUID: Battery Service (0x180f)
Handle range: 0x0010-0x0020
UUID: Device Information (0x180a)
<< ACL Data TX: Handle 71 flags 0x00 dlen 9 #124 [hci0] 22.551281
ATT: Write Request (0x12) len 4
Handle: 0x000f
Data: 0100
HCI Event: Number of Completed Packets (0x13) plen 5 #125 [hci0] 22.695655
Num handles: 1
Handle: 71
Count: 1
ACL Data RX: Handle 71 flags 0x02 dlen 5 #126 [hci0] 22.759830
ATT: Write Response (0x13) len 0
<< ACL Data TX: Handle 71 flags 0x00 dlen 11 #127 [hci0] 22.760241
ATT: Read By Group Type Request (0x10) len 6
Handle range: 0x0021-0xffff
Attribute group type: Primary Service (0x2800)
HCI Event: Number of Completed Packets (0x13) plen 5 #128 [hci0] 22.829698
Num handles: 1
Handle: 71
Count: 1
ACL Data RX: Handle 71 flags 0x02 dlen 26 #129 [hci0] 22.899859
ATT: Read By Group Type Response (0x11) len 21
Attribute data length: 20
Attribute group list: 1 entry
Handle range: 0x0021-0x002c
UUID: Vendor specific (b5f90001-aa8d-11e3-9046-0002a5d5c51b)
<< ACL Data TX: Handle 71 flags 0x00 dlen 11 #130 [hci0] 22.900311
ATT: Read By Group Type Request (0x10) len 6
Handle range: 0x002d-0xffff
Attribute group type: Primary Service (0x2800)
HCI Event: Number of Completed Packets (0x13) plen 5 #131 [hci0] 23.039754
Num handles: 1
Handle: 71
Count: 1
ACL Data RX: Handle 71 flags 0x02 dlen 12 #132 [hci0] 23.109915
ATT: Read By Group Type Response (0x11) len 7
Attribute data length: 6
Attribute group list: 1 entry
Handle range: 0x002d-0x0041
UUID: GoPro, Inc. (0xfea6)
<< ACL Data TX: Handle 71 flags 0x00 dlen 11 #133 [hci0] 23.110286
ATT: Read By Group Type Request (0x10) len 6
Handle range: 0x0042-0xffff
Attribute group type: Primary Service (0x2800)
HCI Event: Number of Completed Packets (0x13) plen 5 #134 [hci0] 23.185785
Num handles: 1
Handle: 71
Count: 1
ACL Data RX: Handle 71 flags 0x02 dlen 26 #135 [hci0] 23.319981
ATT: Read By Group Type Response (0x11) len 21
Attribute data length: 20
Attribute group list: 1 entry
Handle range: 0x0042-0x0047
UUID: Vendor specific (b5f90090-aa8d-11e3-9046-0002a5d5c51b)
<< ACL Data TX: Handle 71 flags 0x00 dlen 11 #136 [hci0] 23.320349
ATT: Read By Group Type Request (0x10) len 6
Handle range: 0x0048-0xffff
Attribute group type: Primary Service (0x2800)
HCI Event: Number of Completed Packets (0x13) plen 5 #137 [hci0] 23.389838
Num handles: 1
Handle: 71
Count: 1
ACL Data RX: Handle 71 flags 0x02 dlen 9 #138 [hci0] 23.458793
ATT: Error Response (0x01) len 4
Read By Group Type Request (0x10)
Handle: 0x0048
Error: Attribute Not Found (0x0a)
HCI Event: Disconnect Complete (0x05) plen 4 #139 [hci0] 24.160066
Status: Success (0x00)
Handle: 71
Reason: Connection Timeout (0x08)
@ Device Disconnected: C9:0F:D9:47:48:B4 (2) reason 1

for sure there are Authentification failures too, but I cannot
btmon-capture 'em right now.

However, it is really hard to find somebody who has a glue what is
going on here, and where the best, we should start to debug.

So please can you help us any further.

We are struggeling for a solution on this for years.

greets

peter

       reply	other threads:[~2021-07-26 10:56 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CAJgPF1JLw40nRXyoXyuGd9hNLWCDeD4ONVM7S_CSE9wQg3gvyA@mail.gmail.com>
2021-07-26 10:56 ` Peter Höller [this message]
2021-07-26 15:34   ` Emil Lenngren
     [not found]     ` <CAJgPF1LG32ShzPsaPWC64VGRC+odvHYrUYXBiDkTdcZHH78sbQ@mail.gmail.com>
2021-07-26 19:56       ` Emil Lenngren
     [not found]       ` <CAJgPF1+BJFyryVWzVYGp=qDHjruJWYq-eAHzm+QeR=BGNct+iw@mail.gmail.com>
2021-07-26 20:17         ` Instable BLE connection - MTU Request, Attribute not found - wireshark findings Emil Lenngren
     [not found]           ` <CAJgPF1KytH81jjezgfOVxrLZzgONqfC4tdTKUy+xPFmP=5f+cw@mail.gmail.com>
2021-10-02 23:57             ` Fwd: " Peter Höller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAJgPF1JTyqom8YJSNPx5-5uecZZKwks1gnAotzwJUhz57nSpLw@mail.gmail.com \
    --to=drmedvet.hoeller@gmail.com \
    --cc=linux-bluetooth@vger.kernel.org \
    --subject='Re: Instable BLE connection - MTU Request, Attribute not found' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).