* L2CAP channels bit rate sharing policy
[not found] <CAPYaOEQ1GAfZMY7WLuZjsVhPm9Z+iUb0cTnNnzaCFS0uHRdUSg@mail.gmail.com>
@ 2020-07-06 13:48 ` Jean-Baptiste MARIE
0 siblings, 0 replies; only message in thread
From: Jean-Baptiste MARIE @ 2020-07-06 13:48 UTC (permalink / raw)
To: linux-bluetooth
Hello,
I would like to know how is managed the sharing of available bandwidth
between two L2CAP sockets over the same link.
Here are my observations so far:
- Connect one L2CAP socket from one device to another device.
- Generate permanent traffic over the socket and measure the bitrate.
- Open a second L2CAP socket over the same link
- The throughput of the first socket is divided by 2.
Is it possible through a patch or any configuration to set a maximum
allowed bitrate for a L2CAP channel? How is managed the sharing of the
link capability between the L2CAP channels?
Thank you for your feedback,
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2020-07-06 13:48 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <CAPYaOEQ1GAfZMY7WLuZjsVhPm9Z+iUb0cTnNnzaCFS0uHRdUSg@mail.gmail.com>
2020-07-06 13:48 ` L2CAP channels bit rate sharing policy Jean-Baptiste MARIE
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).