linux-bluetooth.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH] bluetooth: btmrvl_sdio: add support for sd8977 chipset
@ 2019-01-09 15:03 Ganapathi Bhat
  2019-01-18  9:39 ` Marcel Holtmann
  0 siblings, 1 reply; 2+ messages in thread
From: Ganapathi Bhat @ 2019-01-09 15:03 UTC (permalink / raw)
  To: linux-bluetooth
  Cc: Cathy Luo, Zhiyuan Yang, James Cao, Rakesh Parmar, Rahul Tank

From 6591fb4e6bbac53a9b3b852a2a4160c8de315d97 Mon Sep 17 00:00:00 2001
From: Hemantkumar Suthar <shemant@marvell.com>

This patch adds support for 8977 chipset to mwifiex with SDIO
interface. Register offsets and supported feature flags are
updated. Firmware image used will be mrvl/sd8977_uapsta.bin.

Signed-off-by: Hemantkumar Suthar <shemant@marvell.com>
Signed-off-by: Rakesh Parmar <rakeshp@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>
---
 drivers/bluetooth/Kconfig       |  4 ++--
 drivers/bluetooth/btmrvl_sdio.c | 36 ++++++++++++++++++++++++++++++++++++
 2 files changed, 38 insertions(+), 2 deletions(-)

diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index 845b031..7b2e76e 100644
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -336,7 +336,7 @@ config BT_MRVL
 	  The core driver to support Marvell Bluetooth devices.
 
 	  This driver is required if you want to support
-	  Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897/8997.
+	  Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897/8977/8997.
 
 	  Say Y here to compile Marvell Bluetooth driver
 	  into the kernel or say M to compile it as module.
@@ -350,7 +350,7 @@ config BT_MRVL_SDIO
 	  The driver for Marvell Bluetooth chipsets with SDIO interface.
 
 	  This driver is required if you want to use Marvell Bluetooth
-	  devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897/SD8997
+	  devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897/SD8977/SD8997
 	  chipsets are supported.
 
 	  Say Y here to compile support for Marvell BT-over-SDIO driver
diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index fb3d039..b2712a5 100644
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -211,6 +211,29 @@ static int btmrvl_sdio_probe_of(struct device *dev,
 	.fw_dump_end = 0xea,
 };
 
+static const struct btmrvl_sdio_card_reg btmrvl_reg_8977 = {
+	.cfg = 0x00,
+	.host_int_mask = 0x08,
+	.host_intstatus = 0x0c,
+	.card_status = 0x5c,
+	.sq_read_base_addr_a0 = 0xf8,
+	.sq_read_base_addr_a1 = 0xf9,
+	.card_revision = 0xc8,
+	.card_fw_status0 = 0xe8,
+	.card_fw_status1 = 0xe9,
+	.card_rx_len = 0xea,
+	.card_rx_unit = 0xeb,
+	.io_port_0 = 0xe4,
+	.io_port_1 = 0xe5,
+	.io_port_2 = 0xe6,
+	.int_read_to_clear = true,
+	.host_int_rsr = 0x04,
+	.card_misc_cfg = 0xD8,
+	.fw_dump_ctrl = 0xf0,
+	.fw_dump_start = 0xf1,
+	.fw_dump_end = 0xf8,
+};
+
 static const struct btmrvl_sdio_card_reg btmrvl_reg_8997 = {
 	.cfg = 0x00,
 	.host_int_mask = 0x08,
@@ -279,6 +302,15 @@ static int btmrvl_sdio_probe_of(struct device *dev,
 	.supports_fw_dump = true,
 };
 
+static const struct btmrvl_sdio_device btmrvl_sdio_sd8977 = {
+	.helper         = NULL,
+	.firmware       = "mrvl/sd8977_uapsta.bin",
+	.reg            = &btmrvl_reg_8977,
+	.support_pscan_win_report = true,
+	.sd_blksz_fw_dl = 256,
+	.supports_fw_dump = true,
+};
+
 static const struct btmrvl_sdio_device btmrvl_sdio_sd8997 = {
 	.helper         = NULL,
 	.firmware       = "mrvl/sd8997_uapsta.bin",
@@ -307,6 +339,9 @@ static int btmrvl_sdio_probe_of(struct device *dev,
 	/* Marvell SD8897 Bluetooth device */
 	{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x912E),
 			.driver_data = (unsigned long)&btmrvl_sdio_sd8897 },
+	/* Marvell SD8977 Bluetooth device */
+	{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x9146),
+			.driver_data = (unsigned long)&btmrvl_sdio_sd8977 },
 	/* Marvell SD8997 Bluetooth device */
 	{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x9142),
 			.driver_data = (unsigned long)&btmrvl_sdio_sd8997 },
@@ -1760,4 +1795,5 @@ static void __exit btmrvl_sdio_exit_module(void)
 MODULE_FIRMWARE("mrvl/sd8797_uapsta.bin");
 MODULE_FIRMWARE("mrvl/sd8887_uapsta.bin");
 MODULE_FIRMWARE("mrvl/sd8897_uapsta.bin");
+MODULE_FIRMWARE("mrvl/sd8977_uapsta.bin");
 MODULE_FIRMWARE("mrvl/sd8997_uapsta.bin");
-- 
1.9.1


^ permalink raw reply related	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2019-01-18  9:40 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-01-09 15:03 [PATCH] bluetooth: btmrvl_sdio: add support for sd8977 chipset Ganapathi Bhat
2019-01-18  9:39 ` Marcel Holtmann

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).