Linux-BTRFS Archive on lore.kernel.org
 help / color / Atom feed
From: Nikolay Borisov <nborisov@suse.com>
To: linux-btrfs@vger.kernel.org
Cc: Nikolay Borisov <nborisov@suse.com>
Subject: [PATCHv3] btrfs: Fix error handling in btrfs_cleanup_ordered_extents
Date: Wed, 21 Nov 2018 17:10:52 +0200
Message-ID: <20181121151052.18744-1-nborisov@suse.com> (raw)

Running btrfs/124 in a loop hung up on me sporadically with the
following call trace:
	btrfs           D    0  5760   5324 0x00000000
	Call Trace:
	 ? __schedule+0x243/0x800
	 schedule+0x33/0x90
	 btrfs_start_ordered_extent+0x10c/0x1b0 [btrfs]
	 ? wait_woken+0xa0/0xa0
	 btrfs_wait_ordered_range+0xbb/0x100 [btrfs]
	 btrfs_relocate_block_group+0x1ff/0x230 [btrfs]
	 btrfs_relocate_chunk+0x49/0x100 [btrfs]
	 btrfs_balance+0xbeb/0x1740 [btrfs]
	 btrfs_ioctl_balance+0x2ee/0x380 [btrfs]
	 btrfs_ioctl+0x1691/0x3110 [btrfs]
	 ? lockdep_hardirqs_on+0xed/0x180
	 ? __handle_mm_fault+0x8e7/0xfb0
	 ? _raw_spin_unlock+0x24/0x30
	 ? __handle_mm_fault+0x8e7/0xfb0
	 ? do_vfs_ioctl+0xa5/0x6e0
	 ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs]
	 do_vfs_ioctl+0xa5/0x6e0
	 ? entry_SYSCALL_64_after_hwframe+0x3e/0xbe
	 ksys_ioctl+0x3a/0x70
	 __x64_sys_ioctl+0x16/0x20
	 do_syscall_64+0x60/0x1b0
	 entry_SYSCALL_64_after_hwframe+0x49/0xbe

This happens because during page writeback it's valid for
writepage_delalloc to instantiate a delalloc range which doesn't
belong to the page currently being written back.

The reason this case is valid is due to find_lock_delalloc_range
returning any available range after the passed delalloc_start and
ignorting whether the page under writeback is within that range.
In turn ordered extents (OE) are always created for the returned range
from find_lock_delalloc_range. If, however, a failure occurs while OE
are being created then the clean up code in btrfs_cleanup_ordered_extents
will be called.

Unfortunately the code in btrfs_cleanup_ordered_extents doesn't consider
the case of such 'foreign' range being processed and instead it always
assumes that the range OE are created for belongs to the page. This
leads to the first page of such foregin range to not be cleaned up since
it's deliberately missed skipped by the current cleaning up code.

Fix this by correctly checking whether the current page belongs to the
range being instantiated and if so adjsut the range parameters
passed for cleaning up. If it doesn't, then just clean the whole OE
range directly.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
---
V3:
 * Re-worded the commit for easier comprehension
 * Added RB tag from Josef

V2:
 * Fix compilation failure due to missing parentheses
 * Fixed the "Fixes" tag.
 fs/btrfs/inode.c | 29 ++++++++++++++++++++---------
 1 file changed, 20 insertions(+), 9 deletions(-)

diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index a0fc564626df..9f65f131f244 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -110,17 +110,17 @@ static void __endio_write_update_ordered(struct inode *inode,
  * extent_clear_unlock_delalloc() to clear both the bits EXTENT_DO_ACCOUNTING
  * and EXTENT_DELALLOC simultaneously, because that causes the reserved metadata
  * to be released, which we want to happen only when finishing the ordered
- * extent (btrfs_finish_ordered_io()). Also note that the caller of
- * btrfs_run_delalloc_range already does proper cleanup for the first page of
- * the range, that is, it invokes the callback writepage_end_io_hook() for the
- * range of the first page.
+ * extent (btrfs_finish_ordered_io()).
  */
 static inline void btrfs_cleanup_ordered_extents(struct inode *inode,
-						 const u64 offset,
-						 const u64 bytes)
+						 struct page *locked_page,
+						 u64 offset, u64 bytes)
 {
 	unsigned long index = offset >> PAGE_SHIFT;
 	unsigned long end_index = (offset + bytes - 1) >> PAGE_SHIFT;
+	u64 page_start = page_offset(locked_page);
+	u64 page_end = page_start + PAGE_SIZE - 1;
+
 	struct page *page;
 
 	while (index <= end_index) {
@@ -131,8 +131,18 @@ static inline void btrfs_cleanup_ordered_extents(struct inode *inode,
 		ClearPagePrivate2(page);
 		put_page(page);
 	}
-	return __endio_write_update_ordered(inode, offset + PAGE_SIZE,
-					    bytes - PAGE_SIZE, false);
+
+	/*
+	 * In case this page belongs to the delalloc range being instantiated
+	 * then skip it, since the first page of a range is going to be
+	 * properly cleaned up by the caller of run_delalloc_range
+	 */
+	if (page_start >= offset && page_end <= (offset + bytes - 1)) {
+		offset += PAGE_SIZE;
+		bytes -= PAGE_SIZE;
+	}
+
+	return __endio_write_update_ordered(inode, offset, bytes, false);
 }
 
 static int btrfs_dirty_inode(struct inode *inode);
@@ -1605,7 +1615,8 @@ int btrfs_run_delalloc_range(void *private_data, struct page *locked_page,
 					   write_flags);
 	}
 	if (ret)
-		btrfs_cleanup_ordered_extents(inode, start, end - start + 1);
+		btrfs_cleanup_ordered_extents(inode, locked_page, start,
+					      end - start + 1);
 	return ret;
 }
 
-- 
2.17.1


             reply index

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-21 15:10 Nikolay Borisov [this message]
2018-12-04 16:28 ` Nikolay Borisov
2018-12-05 16:13 ` David Sterba

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181121151052.18744-1-nborisov@suse.com \
    --to=nborisov@suse.com \
    --cc=linux-btrfs@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-BTRFS Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-btrfs/0 linux-btrfs/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-btrfs linux-btrfs/ https://lore.kernel.org/linux-btrfs \
		linux-btrfs@vger.kernel.org linux-btrfs@archiver.kernel.org
	public-inbox-index linux-btrfs


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-btrfs


AGPL code for this site: git clone https://public-inbox.org/ public-inbox