Linux-BTRFS Archive on lore.kernel.org
 help / Atom feed
* [PATCH] Btrfs: scrub, move setup of nofs contexts higher in the stack
@ 2018-12-07 13:23 fdmanana
  2018-12-10 17:58 ` David Sterba
  0 siblings, 1 reply; 2+ messages in thread
From: fdmanana @ 2018-12-07 13:23 UTC (permalink / raw)
  To: linux-btrfs

From: Filipe Manana <fdmanana@suse.com>

Since scrub workers only do memory allocation with GFP_KERNEL when they
need to perform repair, we can move the recent setup of the nofs context
up to scrub_handle_errored_block() instead of setting it up down the call
chain at insert_full_stripe_lock() and scrub_add_page_to_wr_bio(),
removing some duplicate code and comment. So the only paths for which a
scrub worker can do memory allocations using GFP_KERNEL are the following:

 scrub_bio_end_io_worker()
   scrub_block_complete()
     scrub_handle_errored_block()
       lock_full_stripe()
         insert_full_stripe_lock()
           -> kmalloc with GFP_KERNEL

  scrub_bio_end_io_worker()
    scrub_block_complete()
      scrub_handle_errored_block()
        scrub_write_page_to_dev_replace()
          scrub_add_page_to_wr_bio()
            -> kzalloc with GFP_KERNEL

Signed-off-by: Filipe Manana <fdmanana@suse.com>
---

Applies on top of:

  Btrfs: fix deadlock with memory reclaim during scrub

 fs/btrfs/scrub.c | 34 ++++++++++++++--------------------
 1 file changed, 14 insertions(+), 20 deletions(-)

diff --git a/fs/btrfs/scrub.c b/fs/btrfs/scrub.c
index bbd1b36f4918..f996f4064596 100644
--- a/fs/btrfs/scrub.c
+++ b/fs/btrfs/scrub.c
@@ -322,7 +322,6 @@ static struct full_stripe_lock *insert_full_stripe_lock(
 	struct rb_node *parent = NULL;
 	struct full_stripe_lock *entry;
 	struct full_stripe_lock *ret;
-	unsigned int nofs_flag;
 
 	lockdep_assert_held(&locks_root->lock);
 
@@ -342,15 +341,8 @@ static struct full_stripe_lock *insert_full_stripe_lock(
 
 	/*
 	 * Insert new lock.
-	 *
-	 * We must use GFP_NOFS because the scrub task might be waiting for a
-	 * worker task executing this function and in turn a transaction commit
-	 * might be waiting the scrub task to pause (which needs to wait for all
-	 * the worker tasks to complete before pausing).
 	 */
-	nofs_flag = memalloc_nofs_save();
 	ret = kmalloc(sizeof(*ret), GFP_KERNEL);
-	memalloc_nofs_restore(nofs_flag);
 	if (!ret)
 		return ERR_PTR(-ENOMEM);
 	ret->logical = fstripe_logical;
@@ -842,6 +834,7 @@ static int scrub_handle_errored_block(struct scrub_block *sblock_to_check)
 	int page_num;
 	int success;
 	bool full_stripe_locked;
+	unsigned int nofs_flag;
 	static DEFINE_RATELIMIT_STATE(_rs, DEFAULT_RATELIMIT_INTERVAL,
 				      DEFAULT_RATELIMIT_BURST);
 
@@ -867,6 +860,16 @@ static int scrub_handle_errored_block(struct scrub_block *sblock_to_check)
 	dev = sblock_to_check->pagev[0]->dev;
 
 	/*
+	 * We must use GFP_NOFS because the scrub task might be waiting for a
+	 * worker task executing this function and in turn a transaction commit
+	 * might be waiting the scrub task to pause (which needs to wait for all
+	 * the worker tasks to complete before pausing).
+	 * We do allocations in the workers through insert_full_stripe_lock()
+	 * and scrub_add_page_to_wr_bio(), which happens down the call chain of
+	 * this function.
+	 */
+	nofs_flag = memalloc_nofs_save();
+	/*
 	 * For RAID5/6, race can happen for a different device scrub thread.
 	 * For data corruption, Parity and Data threads will both try
 	 * to recovery the data.
@@ -875,6 +878,7 @@ static int scrub_handle_errored_block(struct scrub_block *sblock_to_check)
 	 */
 	ret = lock_full_stripe(fs_info, logical, &full_stripe_locked);
 	if (ret < 0) {
+		memalloc_nofs_restore(nofs_flag);
 		spin_lock(&sctx->stat_lock);
 		if (ret == -ENOMEM)
 			sctx->stat.malloc_errors++;
@@ -914,7 +918,7 @@ static int scrub_handle_errored_block(struct scrub_block *sblock_to_check)
 	 */
 
 	sblocks_for_recheck = kcalloc(BTRFS_MAX_MIRRORS,
-				      sizeof(*sblocks_for_recheck), GFP_NOFS);
+				      sizeof(*sblocks_for_recheck), GFP_KERNEL);
 	if (!sblocks_for_recheck) {
 		spin_lock(&sctx->stat_lock);
 		sctx->stat.malloc_errors++;
@@ -1212,6 +1216,7 @@ static int scrub_handle_errored_block(struct scrub_block *sblock_to_check)
 	}
 
 	ret = unlock_full_stripe(fs_info, logical, full_stripe_locked);
+	memalloc_nofs_restore(nofs_flag);
 	if (ret < 0)
 		return ret;
 	return 0;
@@ -1630,19 +1635,8 @@ static int scrub_add_page_to_wr_bio(struct scrub_ctx *sctx,
 	mutex_lock(&sctx->wr_lock);
 again:
 	if (!sctx->wr_curr_bio) {
-		unsigned int nofs_flag;
-
-		/*
-		 * We must use GFP_NOFS because the scrub task might be waiting
-		 * for a worker task executing this function and in turn a
-		 * transaction commit might be waiting the scrub task to pause
-		 * (which needs to wait for all the worker tasks to complete
-		 * before pausing).
-		 */
-		nofs_flag = memalloc_nofs_save();
 		sctx->wr_curr_bio = kzalloc(sizeof(*sctx->wr_curr_bio),
 					      GFP_KERNEL);
-		memalloc_nofs_restore(nofs_flag);
 		if (!sctx->wr_curr_bio) {
 			mutex_unlock(&sctx->wr_lock);
 			return -ENOMEM;
-- 
2.11.0


^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [PATCH] Btrfs: scrub, move setup of nofs contexts higher in the stack
  2018-12-07 13:23 [PATCH] Btrfs: scrub, move setup of nofs contexts higher in the stack fdmanana
@ 2018-12-10 17:58 ` David Sterba
  0 siblings, 0 replies; 2+ messages in thread
From: David Sterba @ 2018-12-10 17:58 UTC (permalink / raw)
  To: fdmanana; +Cc: linux-btrfs

On Fri, Dec 07, 2018 at 01:23:32PM +0000, fdmanana@kernel.org wrote:
> From: Filipe Manana <fdmanana@suse.com>
> 
> Since scrub workers only do memory allocation with GFP_KERNEL when they
> need to perform repair, we can move the recent setup of the nofs context
> up to scrub_handle_errored_block() instead of setting it up down the call
> chain at insert_full_stripe_lock() and scrub_add_page_to_wr_bio(),
> removing some duplicate code and comment. So the only paths for which a
> scrub worker can do memory allocations using GFP_KERNEL are the following:
> 
>  scrub_bio_end_io_worker()
>    scrub_block_complete()
>      scrub_handle_errored_block()
>        lock_full_stripe()
>          insert_full_stripe_lock()
>            -> kmalloc with GFP_KERNEL
> 
>   scrub_bio_end_io_worker()
>     scrub_block_complete()
>       scrub_handle_errored_block()
>         scrub_write_page_to_dev_replace()
>           scrub_add_page_to_wr_bio()
>             -> kzalloc with GFP_KERNEL
> 
> Signed-off-by: Filipe Manana <fdmanana@suse.com>

Added to misc-next, thanks.

Reviewed-by: David Sterba <dsterba@suse.com>

> @@ -867,6 +860,16 @@ static int scrub_handle_errored_block(struct scrub_block *sblock_to_check)

> +	nofs_flag = memalloc_nofs_save();

>  	ret = lock_full_stripe(fs_info, logical, &full_stripe_locked);

>  	ret = unlock_full_stripe(fs_info, logical, full_stripe_locked);
> +	memalloc_nofs_restore(nofs_flag);

Though I don't see a technical reason for placing the restore after
unlock_full_stripe (no GFP_KERNEL allocations there and not in the
preceding block that does only kfree) it looks better to keep the proper
nesting of memalloc save/lock/unlock/memalloc restore. So agreed, just
that it's a new pattern I think it's good to spell it out.

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, back to index

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-12-07 13:23 [PATCH] Btrfs: scrub, move setup of nofs contexts higher in the stack fdmanana
2018-12-10 17:58 ` David Sterba

Linux-BTRFS Archive on lore.kernel.org

Archives are clonable: git clone --mirror https://lore.kernel.org/linux-btrfs/0 linux-btrfs/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-btrfs linux-btrfs/ https://lore.kernel.org/linux-btrfs \
		linux-btrfs@vger.kernel.org linux-btrfs@archiver.kernel.org
	public-inbox-index linux-btrfs


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-btrfs


AGPL code for this site: git clone https://public-inbox.org/ public-inbox