* [PATCH v2 0/2] Compression level API cleanups
@ 2019-08-20 16:17 David Sterba
2019-08-20 16:17 ` [PATCH v2 1/2] btrfs: define compression levels statically David Sterba
` (2 more replies)
0 siblings, 3 replies; 7+ messages in thread
From: David Sterba @ 2019-08-20 16:17 UTC (permalink / raw)
To: linux-btrfs; +Cc: David Sterba
Remove the callback indirection.
v2:
* switch to unsigned int and use min()
David Sterba (2):
btrfs: define compression levels statically
btrfs: compression: replace set_level callbacks by a common helper
fs/btrfs/compression.c | 20 ++++++++++++++++++--
fs/btrfs/compression.h | 11 +++++------
fs/btrfs/lzo.c | 8 ++------
fs/btrfs/zlib.c | 11 ++---------
fs/btrfs/zstd.c | 11 ++---------
5 files changed, 29 insertions(+), 32 deletions(-)
--
2.22.0
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH v2 1/2] btrfs: define compression levels statically
2019-08-20 16:17 [PATCH v2 0/2] Compression level API cleanups David Sterba
@ 2019-08-20 16:17 ` David Sterba
2019-08-21 10:55 ` Anand Jain
2019-08-20 16:17 ` [PATCH v2 2/2] btrfs: compression: replace set_level callbacks by a common helper David Sterba
2019-08-21 6:52 ` [PATCH v2 0/2] Compression level API cleanups Nikolay Borisov
2 siblings, 1 reply; 7+ messages in thread
From: David Sterba @ 2019-08-20 16:17 UTC (permalink / raw)
To: linux-btrfs; +Cc: David Sterba
The maximum and default levels do not change and can be defined
directly. The set_level callback was a temporary solution and will be
removed.
Signed-off-by: David Sterba <dsterba@suse.com>
---
fs/btrfs/compression.h | 4 ++++
fs/btrfs/lzo.c | 2 ++
fs/btrfs/zlib.c | 2 ++
fs/btrfs/zstd.c | 2 ++
4 files changed, 10 insertions(+)
diff --git a/fs/btrfs/compression.h b/fs/btrfs/compression.h
index 2035b8eb1290..cffd689adb6e 100644
--- a/fs/btrfs/compression.h
+++ b/fs/btrfs/compression.h
@@ -162,6 +162,10 @@ struct btrfs_compress_op {
* if the level is out of bounds or the default if 0 is passed in.
*/
unsigned int (*set_level)(unsigned int level);
+
+ /* Maximum level supported by the compression algorithm */
+ unsigned int max_level;
+ unsigned int default_level;
};
/* The heuristic workspaces are managed via the 0th workspace manager */
diff --git a/fs/btrfs/lzo.c b/fs/btrfs/lzo.c
index 579d53ae256f..adac6cb30d65 100644
--- a/fs/btrfs/lzo.c
+++ b/fs/btrfs/lzo.c
@@ -523,4 +523,6 @@ const struct btrfs_compress_op btrfs_lzo_compress = {
.decompress_bio = lzo_decompress_bio,
.decompress = lzo_decompress,
.set_level = lzo_set_level,
+ .max_level = 1,
+ .default_level = 1,
};
diff --git a/fs/btrfs/zlib.c b/fs/btrfs/zlib.c
index b86b7ad6b900..03d6c3683bd9 100644
--- a/fs/btrfs/zlib.c
+++ b/fs/btrfs/zlib.c
@@ -437,4 +437,6 @@ const struct btrfs_compress_op btrfs_zlib_compress = {
.decompress_bio = zlib_decompress_bio,
.decompress = zlib_decompress,
.set_level = zlib_set_level,
+ .max_level = 9,
+ .default_level = BTRFS_ZLIB_DEFAULT_LEVEL,
};
diff --git a/fs/btrfs/zstd.c b/fs/btrfs/zstd.c
index 3837ca180d52..b2b23a6a497d 100644
--- a/fs/btrfs/zstd.c
+++ b/fs/btrfs/zstd.c
@@ -729,4 +729,6 @@ const struct btrfs_compress_op btrfs_zstd_compress = {
.decompress_bio = zstd_decompress_bio,
.decompress = zstd_decompress,
.set_level = zstd_set_level,
+ .max_level = ZSTD_BTRFS_MAX_LEVEL,
+ .default_level = ZSTD_BTRFS_DEFAULT_LEVEL,
};
--
2.22.0
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH v2 2/2] btrfs: compression: replace set_level callbacks by a common helper
2019-08-20 16:17 [PATCH v2 0/2] Compression level API cleanups David Sterba
2019-08-20 16:17 ` [PATCH v2 1/2] btrfs: define compression levels statically David Sterba
@ 2019-08-20 16:17 ` David Sterba
2019-08-21 10:16 ` Anand Jain
2019-08-21 6:52 ` [PATCH v2 0/2] Compression level API cleanups Nikolay Borisov
2 siblings, 1 reply; 7+ messages in thread
From: David Sterba @ 2019-08-20 16:17 UTC (permalink / raw)
To: linux-btrfs; +Cc: David Sterba
The set_level callbacks do not do anything special and can be replaced
by a helper that uses the levels defined in the tables.
Signed-off-by: David Sterba <dsterba@suse.com>
---
fs/btrfs/compression.c | 20 ++++++++++++++++++--
fs/btrfs/compression.h | 9 ++-------
fs/btrfs/lzo.c | 6 ------
fs/btrfs/zlib.c | 9 ---------
fs/btrfs/zstd.c | 9 ---------
5 files changed, 20 insertions(+), 33 deletions(-)
diff --git a/fs/btrfs/compression.c b/fs/btrfs/compression.c
index 60c47b417a4b..53376c640f61 100644
--- a/fs/btrfs/compression.c
+++ b/fs/btrfs/compression.c
@@ -1039,7 +1039,7 @@ int btrfs_compress_pages(unsigned int type_level, struct address_space *mapping,
struct list_head *workspace;
int ret;
- level = btrfs_compress_op[type]->set_level(level);
+ level = btrfs_compress_set_level(type, level);
workspace = get_workspace(type, level);
ret = btrfs_compress_op[type]->compress_pages(workspace, mapping,
start, pages,
@@ -1611,7 +1611,23 @@ unsigned int btrfs_compress_str2level(unsigned int type, const char *str)
level = 0;
}
- level = btrfs_compress_op[type]->set_level(level);
+ level = btrfs_compress_set_level(type, level);
+
+ return level;
+}
+
+/*
+ * Adjust @level according to the limits of the compression algorithm or
+ * fallback to default
+ */
+unsigned int btrfs_compress_get_level(int type, unsigned level)
+{
+ const struct btrfs_compress_op *ops = btrfs_compress_op[type];
+
+ if (level == 0)
+ level = ops->default_level;
+ else
+ level = min(level, ops->max_level);
return level;
}
diff --git a/fs/btrfs/compression.h b/fs/btrfs/compression.h
index cffd689adb6e..4cb8be9ff88b 100644
--- a/fs/btrfs/compression.h
+++ b/fs/btrfs/compression.h
@@ -156,13 +156,6 @@ struct btrfs_compress_op {
unsigned long start_byte,
size_t srclen, size_t destlen);
- /*
- * This bounds the level set by the user to be within range of a
- * particular compression type. It returns the level that will be used
- * if the level is out of bounds or the default if 0 is passed in.
- */
- unsigned int (*set_level)(unsigned int level);
-
/* Maximum level supported by the compression algorithm */
unsigned int max_level;
unsigned int default_level;
@@ -179,6 +172,8 @@ extern const struct btrfs_compress_op btrfs_zstd_compress;
const char* btrfs_compress_type2str(enum btrfs_compression_type type);
bool btrfs_compress_is_valid_type(const char *str, size_t len);
+unsigned int btrfs_compress_set_level(int type, unsigned level);
+
int btrfs_compress_heuristic(struct inode *inode, u64 start, u64 end);
#endif
diff --git a/fs/btrfs/lzo.c b/fs/btrfs/lzo.c
index adac6cb30d65..acad4174f68d 100644
--- a/fs/btrfs/lzo.c
+++ b/fs/btrfs/lzo.c
@@ -507,11 +507,6 @@ static int lzo_decompress(struct list_head *ws, unsigned char *data_in,
return ret;
}
-static unsigned int lzo_set_level(unsigned int level)
-{
- return 0;
-}
-
const struct btrfs_compress_op btrfs_lzo_compress = {
.init_workspace_manager = lzo_init_workspace_manager,
.cleanup_workspace_manager = lzo_cleanup_workspace_manager,
@@ -522,7 +517,6 @@ const struct btrfs_compress_op btrfs_lzo_compress = {
.compress_pages = lzo_compress_pages,
.decompress_bio = lzo_decompress_bio,
.decompress = lzo_decompress,
- .set_level = lzo_set_level,
.max_level = 1,
.default_level = 1,
};
diff --git a/fs/btrfs/zlib.c b/fs/btrfs/zlib.c
index 03d6c3683bd9..df1aace5df50 100644
--- a/fs/btrfs/zlib.c
+++ b/fs/btrfs/zlib.c
@@ -418,14 +418,6 @@ static int zlib_decompress(struct list_head *ws, unsigned char *data_in,
return ret;
}
-static unsigned int zlib_set_level(unsigned int level)
-{
- if (!level)
- return BTRFS_ZLIB_DEFAULT_LEVEL;
-
- return min_t(unsigned int, level, 9);
-}
-
const struct btrfs_compress_op btrfs_zlib_compress = {
.init_workspace_manager = zlib_init_workspace_manager,
.cleanup_workspace_manager = zlib_cleanup_workspace_manager,
@@ -436,7 +428,6 @@ const struct btrfs_compress_op btrfs_zlib_compress = {
.compress_pages = zlib_compress_pages,
.decompress_bio = zlib_decompress_bio,
.decompress = zlib_decompress,
- .set_level = zlib_set_level,
.max_level = 9,
.default_level = BTRFS_ZLIB_DEFAULT_LEVEL,
};
diff --git a/fs/btrfs/zstd.c b/fs/btrfs/zstd.c
index b2b23a6a497d..0af4a5cd4313 100644
--- a/fs/btrfs/zstd.c
+++ b/fs/btrfs/zstd.c
@@ -710,14 +710,6 @@ static int zstd_decompress(struct list_head *ws, unsigned char *data_in,
return ret;
}
-static unsigned int zstd_set_level(unsigned int level)
-{
- if (!level)
- return ZSTD_BTRFS_DEFAULT_LEVEL;
-
- return min_t(unsigned int, level, ZSTD_BTRFS_MAX_LEVEL);
-}
-
const struct btrfs_compress_op btrfs_zstd_compress = {
.init_workspace_manager = zstd_init_workspace_manager,
.cleanup_workspace_manager = zstd_cleanup_workspace_manager,
@@ -728,7 +720,6 @@ const struct btrfs_compress_op btrfs_zstd_compress = {
.compress_pages = zstd_compress_pages,
.decompress_bio = zstd_decompress_bio,
.decompress = zstd_decompress,
- .set_level = zstd_set_level,
.max_level = ZSTD_BTRFS_MAX_LEVEL,
.default_level = ZSTD_BTRFS_DEFAULT_LEVEL,
};
--
2.22.0
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH v2 0/2] Compression level API cleanups
2019-08-20 16:17 [PATCH v2 0/2] Compression level API cleanups David Sterba
2019-08-20 16:17 ` [PATCH v2 1/2] btrfs: define compression levels statically David Sterba
2019-08-20 16:17 ` [PATCH v2 2/2] btrfs: compression: replace set_level callbacks by a common helper David Sterba
@ 2019-08-21 6:52 ` Nikolay Borisov
2 siblings, 0 replies; 7+ messages in thread
From: Nikolay Borisov @ 2019-08-21 6:52 UTC (permalink / raw)
To: David Sterba, linux-btrfs
On 20.08.19 г. 19:17 ч., David Sterba wrote:
> Remove the callback indirection.
>
> v2:
> * switch to unsigned int and use min()
>
> David Sterba (2):
> btrfs: define compression levels statically
> btrfs: compression: replace set_level callbacks by a common helper
>
For the whole series:
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
> fs/btrfs/compression.c | 20 ++++++++++++++++++--
> fs/btrfs/compression.h | 11 +++++------
> fs/btrfs/lzo.c | 8 ++------
> fs/btrfs/zlib.c | 11 ++---------
> fs/btrfs/zstd.c | 11 ++---------
> 5 files changed, 29 insertions(+), 32 deletions(-)
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v2 2/2] btrfs: compression: replace set_level callbacks by a common helper
2019-08-20 16:17 ` [PATCH v2 2/2] btrfs: compression: replace set_level callbacks by a common helper David Sterba
@ 2019-08-21 10:16 ` Anand Jain
2019-08-21 10:53 ` David Sterba
0 siblings, 1 reply; 7+ messages in thread
From: Anand Jain @ 2019-08-21 10:16 UTC (permalink / raw)
To: David Sterba, linux-btrfs
On 21/8/19 12:17 AM, David Sterba wrote:
> The set_level callbacks do not do anything special and can be replaced
> by a helper that uses the levels defined in the tables.
>
> Signed-off-by: David Sterba <dsterba@suse.com>
> ---
> fs/btrfs/compression.c | 20 ++++++++++++++++++--
> fs/btrfs/compression.h | 9 ++-------
> fs/btrfs/lzo.c | 6 ------
> fs/btrfs/zlib.c | 9 ---------
> fs/btrfs/zstd.c | 9 ---------
> 5 files changed, 20 insertions(+), 33 deletions(-)
>
> diff --git a/fs/btrfs/compression.c b/fs/btrfs/compression.c
> index 60c47b417a4b..53376c640f61 100644
> --- a/fs/btrfs/compression.c
> +++ b/fs/btrfs/compression.c
> @@ -1039,7 +1039,7 @@ int btrfs_compress_pages(unsigned int type_level, struct address_space *mapping,
> struct list_head *workspace;
> int ret;
>
> - level = btrfs_compress_op[type]->set_level(level);
> + level = btrfs_compress_set_level(type, level);
> workspace = get_workspace(type, level);
> ret = btrfs_compress_op[type]->compress_pages(workspace, mapping,
> start, pages,
> @@ -1611,7 +1611,23 @@ unsigned int btrfs_compress_str2level(unsigned int type, const char *str)
> level = 0;
> }
>
> - level = btrfs_compress_op[type]->set_level(level);
> + level = btrfs_compress_set_level(type, level);
> +
> + return level;
> +}
> +
> +/*
> + * Adjust @level according to the limits of the compression algorithm or
> + * fallback to default
> + */
> +unsigned int btrfs_compress_get_level(int type, unsigned level)
> +{
> + const struct btrfs_compress_op *ops = btrfs_compress_op[type];
> +
> + if (level == 0)
> + level = ops->default_level;
> + else
> + level = min(level, ops->max_level);
>
> return level;
> }
> diff --git a/fs/btrfs/compression.h b/fs/btrfs/compression.h
> index cffd689adb6e..4cb8be9ff88b 100644
> --- a/fs/btrfs/compression.h
> +++ b/fs/btrfs/compression.h
> @@ -156,13 +156,6 @@ struct btrfs_compress_op {
> unsigned long start_byte,
> size_t srclen, size_t destlen);
>
> - /*
> - * This bounds the level set by the user to be within range of a
> - * particular compression type. It returns the level that will be used
> - * if the level is out of bounds or the default if 0 is passed in.
> - */
> - unsigned int (*set_level)(unsigned int level);
> -
> /* Maximum level supported by the compression algorithm */
> unsigned int max_level;
> unsigned int default_level;
> @@ -179,6 +172,8 @@ extern const struct btrfs_compress_op btrfs_zstd_compress;
> const char* btrfs_compress_type2str(enum btrfs_compression_type type);
> bool btrfs_compress_is_valid_type(const char *str, size_t len);
>
> +unsigned int btrfs_compress_set_level(int type, unsigned level);
> +
btrfs_compress_set_level() is undefined.
Thanks, Anand
> int btrfs_compress_heuristic(struct inode *inode, u64 start, u64 end);
>
> #endif
> diff --git a/fs/btrfs/lzo.c b/fs/btrfs/lzo.c
> index adac6cb30d65..acad4174f68d 100644
> --- a/fs/btrfs/lzo.c
> +++ b/fs/btrfs/lzo.c
> @@ -507,11 +507,6 @@ static int lzo_decompress(struct list_head *ws, unsigned char *data_in,
> return ret;
> }
>
> -static unsigned int lzo_set_level(unsigned int level)
> -{
> - return 0;
> -}
> -
> const struct btrfs_compress_op btrfs_lzo_compress = {
> .init_workspace_manager = lzo_init_workspace_manager,
> .cleanup_workspace_manager = lzo_cleanup_workspace_manager,
> @@ -522,7 +517,6 @@ const struct btrfs_compress_op btrfs_lzo_compress = {
> .compress_pages = lzo_compress_pages,
> .decompress_bio = lzo_decompress_bio,
> .decompress = lzo_decompress,
> - .set_level = lzo_set_level,
> .max_level = 1,
> .default_level = 1,
> };
> diff --git a/fs/btrfs/zlib.c b/fs/btrfs/zlib.c
> index 03d6c3683bd9..df1aace5df50 100644
> --- a/fs/btrfs/zlib.c
> +++ b/fs/btrfs/zlib.c
> @@ -418,14 +418,6 @@ static int zlib_decompress(struct list_head *ws, unsigned char *data_in,
> return ret;
> }
>
> -static unsigned int zlib_set_level(unsigned int level)
> -{
> - if (!level)
> - return BTRFS_ZLIB_DEFAULT_LEVEL;
> -
> - return min_t(unsigned int, level, 9);
> -}
> -
> const struct btrfs_compress_op btrfs_zlib_compress = {
> .init_workspace_manager = zlib_init_workspace_manager,
> .cleanup_workspace_manager = zlib_cleanup_workspace_manager,
> @@ -436,7 +428,6 @@ const struct btrfs_compress_op btrfs_zlib_compress = {
> .compress_pages = zlib_compress_pages,
> .decompress_bio = zlib_decompress_bio,
> .decompress = zlib_decompress,
> - .set_level = zlib_set_level,
> .max_level = 9,
> .default_level = BTRFS_ZLIB_DEFAULT_LEVEL,
> };
> diff --git a/fs/btrfs/zstd.c b/fs/btrfs/zstd.c
> index b2b23a6a497d..0af4a5cd4313 100644
> --- a/fs/btrfs/zstd.c
> +++ b/fs/btrfs/zstd.c
> @@ -710,14 +710,6 @@ static int zstd_decompress(struct list_head *ws, unsigned char *data_in,
> return ret;
> }
>
> -static unsigned int zstd_set_level(unsigned int level)
> -{
> - if (!level)
> - return ZSTD_BTRFS_DEFAULT_LEVEL;
> -
> - return min_t(unsigned int, level, ZSTD_BTRFS_MAX_LEVEL);
> -}
> -
> const struct btrfs_compress_op btrfs_zstd_compress = {
> .init_workspace_manager = zstd_init_workspace_manager,
> .cleanup_workspace_manager = zstd_cleanup_workspace_manager,
> @@ -728,7 +720,6 @@ const struct btrfs_compress_op btrfs_zstd_compress = {
> .compress_pages = zstd_compress_pages,
> .decompress_bio = zstd_decompress_bio,
> .decompress = zstd_decompress,
> - .set_level = zstd_set_level,
> .max_level = ZSTD_BTRFS_MAX_LEVEL,
> .default_level = ZSTD_BTRFS_DEFAULT_LEVEL,
> };
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v2 2/2] btrfs: compression: replace set_level callbacks by a common helper
2019-08-21 10:16 ` Anand Jain
@ 2019-08-21 10:53 ` David Sterba
0 siblings, 0 replies; 7+ messages in thread
From: David Sterba @ 2019-08-21 10:53 UTC (permalink / raw)
To: Anand Jain; +Cc: David Sterba, linux-btrfs
On Wed, Aug 21, 2019 at 06:16:27PM +0800, Anand Jain wrote:
> On 21/8/19 12:17 AM, David Sterba wrote:
> > The set_level callbacks do not do anything special and can be replaced
> > by a helper that uses the levels defined in the tables.
> >
> > Signed-off-by: David Sterba <dsterba@suse.com>
> > ---
> > fs/btrfs/compression.c | 20 ++++++++++++++++++--
> > fs/btrfs/compression.h | 9 ++-------
> > fs/btrfs/lzo.c | 6 ------
> > fs/btrfs/zlib.c | 9 ---------
> > fs/btrfs/zstd.c | 9 ---------
> > 5 files changed, 20 insertions(+), 33 deletions(-)
> >
> > diff --git a/fs/btrfs/compression.c b/fs/btrfs/compression.c
> > index 60c47b417a4b..53376c640f61 100644
> > --- a/fs/btrfs/compression.c
> > +++ b/fs/btrfs/compression.c
> > @@ -1039,7 +1039,7 @@ int btrfs_compress_pages(unsigned int type_level, struct address_space *mapping,
> > struct list_head *workspace;
> > int ret;
> >
> > - level = btrfs_compress_op[type]->set_level(level);
> > + level = btrfs_compress_set_level(type, level);
> > workspace = get_workspace(type, level);
> > ret = btrfs_compress_op[type]->compress_pages(workspace, mapping,
> > start, pages,
> > @@ -1611,7 +1611,23 @@ unsigned int btrfs_compress_str2level(unsigned int type, const char *str)
> > level = 0;
> > }
> >
> > - level = btrfs_compress_op[type]->set_level(level);
> > + level = btrfs_compress_set_level(type, level);
> > +
> > + return level;
> > +}
> > +
> > +/*
> > + * Adjust @level according to the limits of the compression algorithm or
> > + * fallback to default
> > + */
> > +unsigned int btrfs_compress_get_level(int type, unsigned level)
> > +{
> > + const struct btrfs_compress_op *ops = btrfs_compress_op[type];
> > +
> > + if (level == 0)
> > + level = ops->default_level;
> > + else
> > + level = min(level, ops->max_level);
> >
> > return level;
> > }
> > diff --git a/fs/btrfs/compression.h b/fs/btrfs/compression.h
> > index cffd689adb6e..4cb8be9ff88b 100644
> > --- a/fs/btrfs/compression.h
> > +++ b/fs/btrfs/compression.h
> > @@ -156,13 +156,6 @@ struct btrfs_compress_op {
> > unsigned long start_byte,
> > size_t srclen, size_t destlen);
> >
> > - /*
> > - * This bounds the level set by the user to be within range of a
> > - * particular compression type. It returns the level that will be used
> > - * if the level is out of bounds or the default if 0 is passed in.
> > - */
> > - unsigned int (*set_level)(unsigned int level);
> > -
> > /* Maximum level supported by the compression algorithm */
> > unsigned int max_level;
> > unsigned int default_level;
> > @@ -179,6 +172,8 @@ extern const struct btrfs_compress_op btrfs_zstd_compress;
> > const char* btrfs_compress_type2str(enum btrfs_compression_type type);
> > bool btrfs_compress_is_valid_type(const char *str, size_t len);
> >
> > +unsigned int btrfs_compress_set_level(int type, unsigned level);
> > +
>
> btrfs_compress_set_level() is undefined.
Indeed, by some mistake the function is named btrfs_compress_get_level
and my compiler does not care to fail the build.
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v2 1/2] btrfs: define compression levels statically
2019-08-20 16:17 ` [PATCH v2 1/2] btrfs: define compression levels statically David Sterba
@ 2019-08-21 10:55 ` Anand Jain
0 siblings, 0 replies; 7+ messages in thread
From: Anand Jain @ 2019-08-21 10:55 UTC (permalink / raw)
To: David Sterba, linux-btrfs
On 21/8/19 12:17 AM, David Sterba wrote:
> The maximum and default levels do not change and can be defined
> directly. The set_level callback was a temporary solution and will be
> removed.
>
> Signed-off-by: David Sterba <dsterba@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2019-08-21 10:55 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-08-20 16:17 [PATCH v2 0/2] Compression level API cleanups David Sterba
2019-08-20 16:17 ` [PATCH v2 1/2] btrfs: define compression levels statically David Sterba
2019-08-21 10:55 ` Anand Jain
2019-08-20 16:17 ` [PATCH v2 2/2] btrfs: compression: replace set_level callbacks by a common helper David Sterba
2019-08-21 10:16 ` Anand Jain
2019-08-21 10:53 ` David Sterba
2019-08-21 6:52 ` [PATCH v2 0/2] Compression level API cleanups Nikolay Borisov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).