[PATCH] btrfs: test that send can issue clone operations within the same file

[PATCH] btrfs: test that send can issue clone operations within the same file

[fdmanana]

From: Filipe Manana <fdmanana@suse.com>

Verify that both full and incremental send operations can issue clone
operations when a file has extents that are shared with itself (at
different offsets of course).

This currently fails on btrfs but is addressed by a patch for the
kernel titled:

  "Btrfs: send, allow clone operations within the same file"

Signed-off-by: Filipe Manana <fdmanana@suse.com>
---
 tests/btrfs/200     | 133 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 tests/btrfs/200.out |  17 +++++++
 tests/btrfs/group   |   1 +
 3 files changed, 151 insertions(+)
 create mode 100755 tests/btrfs/200
 create mode 100644 tests/btrfs/200.out

diff --git a/tests/btrfs/200 b/tests/btrfs/200
new file mode 100755
index 00000000..e7853c4b
--- /dev/null
+++ b/tests/btrfs/200
@@ -0,0 +1,133 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2019 SUSE Linux Products GmbH. All Rights Reserved.
+#
+# FS QA Test No. 200
+#
+# Check that send operations (full and incremental) are able to issue clone
+# operations for extents that are shared between the same file.
+#
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+tmp=/tmp/$$
+status=1	# failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+	cd /
+	rm -f $tmp.*
+	rm -fr $send_files_dir
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+. ./common/punch
+
+# real QA test starts here
+_supported_fs btrfs
+_supported_os Linux
+_require_fssum
+_require_test
+_require_scratch_reflink
+_require_xfs_io_command "fiemap"
+
+count_extents()
+{
+	$XFS_IO_PROG -r -c "fiemap" $1 | tail -n +2 | wc -l
+}
+
+count_exclusive_extents()
+{
+	$XFS_IO_PROG -r -c "fiemap" $1 | tail -n +2 | cut -d ' ' -f 3 \
+		| sort | uniq | wc -l
+}
+
+send_files_dir=$TEST_DIR/btrfs-test-$seq
+
+rm -f $seqres.full
+rm -fr $send_files_dir
+mkdir $send_files_dir
+
+_scratch_mkfs >>$seqres.full 2>&1
+_scratch_mount
+
+# Create our first test file, which has an extent that is shared only with
+# itself and no other files. We want to verify a full send operation will
+# clone the extent.
+$XFS_IO_PROG -f -c "pwrite -S 0xb1 -b 64K 0 64K" $SCRATCH_MNT/foo \
+	| _filter_xfs_io
+$XFS_IO_PROG -c "reflink $SCRATCH_MNT/foo 0 64K 64K" $SCRATCH_MNT/foo \
+	| _filter_xfs_io
+
+# Create out second test file which initially, for the first send operation,
+# only has a single extent that is not shared.
+$XFS_IO_PROG -f -c "pwrite -S 0xc7 -b 64K 0 64K" $SCRATCH_MNT/bar \
+	| _filter_xfs_io
+
+$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/base 2>&1 \
+	| _filter_scratch
+
+$BTRFS_UTIL_PROG send -f $send_files_dir/1.snap $SCRATCH_MNT/base 2>&1 \
+	| _filter_scratch
+
+# Now clone the existing extent in file bar to itself at a different offset.
+# We want to verify the incremental send operation below will issue a clone
+# operation instead of a write operation.
+$XFS_IO_PROG -c "reflink $SCRATCH_MNT/bar 0 64K 64K" $SCRATCH_MNT/bar \
+	| _filter_xfs_io
+
+$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/incr 2>&1 \
+	| _filter_scratch
+
+$BTRFS_UTIL_PROG send -p $SCRATCH_MNT/base -f $send_files_dir/2.snap \
+	$SCRATCH_MNT/incr 2>&1 | _filter_scratch
+
+# Compute digests of the snapshot trees so that later we can compare against
+# digests of the trees in the new filesystem, to see if they match (no data or
+# metadata corruption happened).
+$FSSUM_PROG -A -f -w $send_files_dir/base.fssum $SCRATCH_MNT/base
+$FSSUM_PROG -A -f -w $send_files_dir/incr.fssum \
+	-x $SCRATCH_MNT/incr/base $SCRATCH_MNT/incr
+
+# Now recreate the filesystem by receiving both send streams and verify we get
+# the same file contents that the original filesystem had and that files foo
+# and bar have shared extents.
+_scratch_unmount
+_scratch_mkfs >>$seqres.full 2>&1
+_scratch_mount
+
+$BTRFS_UTIL_PROG receive -f $send_files_dir/1.snap $SCRATCH_MNT
+$BTRFS_UTIL_PROG receive -f $send_files_dir/2.snap $SCRATCH_MNT
+
+# Compute digests of the snapshot trees in the new filesystem and compare them
+# to the ones in the original filesystem, they must match.
+$FSSUM_PROG -r $send_files_dir/base.fssum $SCRATCH_MNT/base
+$FSSUM_PROG -r $send_files_dir/incr.fssum $SCRATCH_MNT/incr
+
+num_extents=$(count_extents $SCRATCH_MNT/base/foo)
+num_exclusive_extents=$(count_exclusive_extents $SCRATCH_MNT/base/foo)
+if [ $num_extents -ne 2 ] || [ $num_exclusive_extents -ne 1 ]; then
+	echo "File foo does not have 2 shared extents in the base snapshot"
+	$XFS_IO_PROG -r -c "fiemap" $SCRATCH_MNT/base/foo
+fi
+
+num_extents=$(count_extents $SCRATCH_MNT/incr/foo)
+num_exclusive_extents=$(count_exclusive_extents $SCRATCH_MNT/incr/foo)
+if [ $num_extents -ne 2 ] || [ $num_exclusive_extents -ne 1 ]; then
+	echo "File foo does not have 2 shared extents in the incr snapshot"
+	$XFS_IO_PROG -r -c "fiemap" $SCRATCH_MNT/incr/foo
+fi
+
+num_extents=$(count_extents $SCRATCH_MNT/incr/bar)
+num_exclusive_extents=$(count_exclusive_extents $SCRATCH_MNT/incr/bar)
+if [ $num_extents -ne 2 ] || [ $num_exclusive_extents -ne 1 ]; then
+	echo "File bar does not have 2 shared extents in the incr snapshot"
+	$XFS_IO_PROG -r -c "fiemap" $SCRATCH_MNT/incr/bar
+fi
+
+status=0
+exit
diff --git a/tests/btrfs/200.out b/tests/btrfs/200.out
new file mode 100644
index 00000000..3eec567e
--- /dev/null
+++ b/tests/btrfs/200.out
@@ -0,0 +1,17 @@
+QA output created by 200
+wrote 65536/65536 bytes at offset 0
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+linked 65536/65536 bytes at offset 65536
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 65536/65536 bytes at offset 0
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/base'
+At subvol SCRATCH_MNT/base
+linked 65536/65536 bytes at offset 65536
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/incr'
+At subvol SCRATCH_MNT/incr
+At subvol base
+At snapshot incr
+OK
+OK
diff --git a/tests/btrfs/group b/tests/btrfs/group
index c7ab129e..d56dcafa 100644
--- a/tests/btrfs/group
+++ b/tests/btrfs/group
@@ -202,3 +202,4 @@
 197 auto quick volume
 198 auto quick volume
 199 auto quick trim
+200 auto quick send clone
-- 
2.11.0

Re: [PATCH] btrfs: test that send can issue clone operations within the same file

[David Sterba]

On Wed, Oct 30, 2019 at 12:27:41PM +0000, fdmanana@kernel.org wrote:
> From: Filipe Manana <fdmanana@suse.com>
> 
> Verify that both full and incremental send operations can issue clone
> operations when a file has extents that are shared with itself (at
> different offsets of course).
> 
> This currently fails on btrfs but is addressed by a patch for the
> kernel titled:
> 
>   "Btrfs: send, allow clone operations within the same file"
> 
> Signed-off-by: Filipe Manana <fdmanana@suse.com>

Reviewed-by: David Sterba <dsterba@suse.com>

Re: [PATCH] btrfs: test that send can issue clone operations within the same file

[Eryu Guan]

On Wed, Oct 30, 2019 at 12:27:41PM +0000, fdmanana@kernel.org wrote:
> From: Filipe Manana <fdmanana@suse.com>
> 
> Verify that both full and incremental send operations can issue clone
> operations when a file has extents that are shared with itself (at
> different offsets of course).
> 
> This currently fails on btrfs but is addressed by a patch for the
> kernel titled:
> 
>   "Btrfs: send, allow clone operations within the same file"
> 
> Signed-off-by: Filipe Manana <fdmanana@suse.com>
> ---
>  tests/btrfs/200     | 133 ++++++++++++++++++++++++++++++++++++++++++++++++++++
>  tests/btrfs/200.out |  17 +++++++
>  tests/btrfs/group   |   1 +
>  3 files changed, 151 insertions(+)
>  create mode 100755 tests/btrfs/200
>  create mode 100644 tests/btrfs/200.out
> 
> diff --git a/tests/btrfs/200 b/tests/btrfs/200
> new file mode 100755
> index 00000000..e7853c4b
> --- /dev/null
> +++ b/tests/btrfs/200
> @@ -0,0 +1,133 @@
> +#! /bin/bash
> +# SPDX-License-Identifier: GPL-2.0
> +# Copyright (C) 2019 SUSE Linux Products GmbH. All Rights Reserved.
> +#
> +# FS QA Test No. 200
> +#
> +# Check that send operations (full and incremental) are able to issue clone
> +# operations for extents that are shared between the same file.
> +#
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +tmp=/tmp/$$
> +status=1	# failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> +	cd /
> +	rm -f $tmp.*
> +	rm -fr $send_files_dir
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +. ./common/reflink
> +. ./common/punch
> +
> +# real QA test starts here
> +_supported_fs btrfs
> +_supported_os Linux
> +_require_fssum
> +_require_test
> +_require_scratch_reflink
> +_require_xfs_io_command "fiemap"
> +
> +count_extents()
> +{
> +	$XFS_IO_PROG -r -c "fiemap" $1 | tail -n +2 | wc -l
> +}

There's a similar in common/rc called _count_extents(), but it opens
file with rw permission. Perhaps you could just update the existing
helper? (And add '-r' to _count_holes() and _count_attr_extents()?)

> +
> +count_exclusive_extents()
> +{
> +	$XFS_IO_PROG -r -c "fiemap" $1 | tail -n +2 | cut -d ' ' -f 3 \
> +		| sort | uniq | wc -l
> +}

And maybe add this one to common helper too.

Otherwise looks good to me.

Thanks,
Eryu

> +
> +send_files_dir=$TEST_DIR/btrfs-test-$seq
> +
> +rm -f $seqres.full
> +rm -fr $send_files_dir
> +mkdir $send_files_dir
> +
> +_scratch_mkfs >>$seqres.full 2>&1
> +_scratch_mount
> +
> +# Create our first test file, which has an extent that is shared only with
> +# itself and no other files. We want to verify a full send operation will
> +# clone the extent.
> +$XFS_IO_PROG -f -c "pwrite -S 0xb1 -b 64K 0 64K" $SCRATCH_MNT/foo \
> +	| _filter_xfs_io
> +$XFS_IO_PROG -c "reflink $SCRATCH_MNT/foo 0 64K 64K" $SCRATCH_MNT/foo \
> +	| _filter_xfs_io
> +
> +# Create out second test file which initially, for the first send operation,
> +# only has a single extent that is not shared.
> +$XFS_IO_PROG -f -c "pwrite -S 0xc7 -b 64K 0 64K" $SCRATCH_MNT/bar \
> +	| _filter_xfs_io
> +
> +$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/base 2>&1 \
> +	| _filter_scratch
> +
> +$BTRFS_UTIL_PROG send -f $send_files_dir/1.snap $SCRATCH_MNT/base 2>&1 \
> +	| _filter_scratch
> +
> +# Now clone the existing extent in file bar to itself at a different offset.
> +# We want to verify the incremental send operation below will issue a clone
> +# operation instead of a write operation.
> +$XFS_IO_PROG -c "reflink $SCRATCH_MNT/bar 0 64K 64K" $SCRATCH_MNT/bar \
> +	| _filter_xfs_io
> +
> +$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/incr 2>&1 \
> +	| _filter_scratch
> +
> +$BTRFS_UTIL_PROG send -p $SCRATCH_MNT/base -f $send_files_dir/2.snap \
> +	$SCRATCH_MNT/incr 2>&1 | _filter_scratch
> +
> +# Compute digests of the snapshot trees so that later we can compare against
> +# digests of the trees in the new filesystem, to see if they match (no data or
> +# metadata corruption happened).
> +$FSSUM_PROG -A -f -w $send_files_dir/base.fssum $SCRATCH_MNT/base
> +$FSSUM_PROG -A -f -w $send_files_dir/incr.fssum \
> +	-x $SCRATCH_MNT/incr/base $SCRATCH_MNT/incr
> +
> +# Now recreate the filesystem by receiving both send streams and verify we get
> +# the same file contents that the original filesystem had and that files foo
> +# and bar have shared extents.
> +_scratch_unmount
> +_scratch_mkfs >>$seqres.full 2>&1
> +_scratch_mount
> +
> +$BTRFS_UTIL_PROG receive -f $send_files_dir/1.snap $SCRATCH_MNT
> +$BTRFS_UTIL_PROG receive -f $send_files_dir/2.snap $SCRATCH_MNT
> +
> +# Compute digests of the snapshot trees in the new filesystem and compare them
> +# to the ones in the original filesystem, they must match.
> +$FSSUM_PROG -r $send_files_dir/base.fssum $SCRATCH_MNT/base
> +$FSSUM_PROG -r $send_files_dir/incr.fssum $SCRATCH_MNT/incr
> +
> +num_extents=$(count_extents $SCRATCH_MNT/base/foo)
> +num_exclusive_extents=$(count_exclusive_extents $SCRATCH_MNT/base/foo)
> +if [ $num_extents -ne 2 ] || [ $num_exclusive_extents -ne 1 ]; then
> +	echo "File foo does not have 2 shared extents in the base snapshot"
> +	$XFS_IO_PROG -r -c "fiemap" $SCRATCH_MNT/base/foo
> +fi
> +
> +num_extents=$(count_extents $SCRATCH_MNT/incr/foo)
> +num_exclusive_extents=$(count_exclusive_extents $SCRATCH_MNT/incr/foo)
> +if [ $num_extents -ne 2 ] || [ $num_exclusive_extents -ne 1 ]; then
> +	echo "File foo does not have 2 shared extents in the incr snapshot"
> +	$XFS_IO_PROG -r -c "fiemap" $SCRATCH_MNT/incr/foo
> +fi
> +
> +num_extents=$(count_extents $SCRATCH_MNT/incr/bar)
> +num_exclusive_extents=$(count_exclusive_extents $SCRATCH_MNT/incr/bar)
> +if [ $num_extents -ne 2 ] || [ $num_exclusive_extents -ne 1 ]; then
> +	echo "File bar does not have 2 shared extents in the incr snapshot"
> +	$XFS_IO_PROG -r -c "fiemap" $SCRATCH_MNT/incr/bar
> +fi
> +
> +status=0
> +exit
> diff --git a/tests/btrfs/200.out b/tests/btrfs/200.out
> new file mode 100644
> index 00000000..3eec567e
> --- /dev/null
> +++ b/tests/btrfs/200.out
> @@ -0,0 +1,17 @@
> +QA output created by 200
> +wrote 65536/65536 bytes at offset 0
> +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> +linked 65536/65536 bytes at offset 65536
> +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> +wrote 65536/65536 bytes at offset 0
> +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> +Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/base'
> +At subvol SCRATCH_MNT/base
> +linked 65536/65536 bytes at offset 65536
> +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> +Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/incr'
> +At subvol SCRATCH_MNT/incr
> +At subvol base
> +At snapshot incr
> +OK
> +OK
> diff --git a/tests/btrfs/group b/tests/btrfs/group
> index c7ab129e..d56dcafa 100644
> --- a/tests/btrfs/group
> +++ b/tests/btrfs/group
> @@ -202,3 +202,4 @@
>  197 auto quick volume
>  198 auto quick volume
>  199 auto quick trim
> +200 auto quick send clone
> -- 
> 2.11.0
> 

Re: [PATCH] btrfs: test that send can issue clone operations within the same file

[Filipe Manana]

On Sat, Nov 2, 2019 at 6:26 AM Eryu Guan <guaneryu@gmail.com> wrote:
>
> On Wed, Oct 30, 2019 at 12:27:41PM +0000, fdmanana@kernel.org wrote:
> > From: Filipe Manana <fdmanana@suse.com>
> >
> > Verify that both full and incremental send operations can issue clone
> > operations when a file has extents that are shared with itself (at
> > different offsets of course).
> >
> > This currently fails on btrfs but is addressed by a patch for the
> > kernel titled:
> >
> >   "Btrfs: send, allow clone operations within the same file"
> >
> > Signed-off-by: Filipe Manana <fdmanana@suse.com>
> > ---
> >  tests/btrfs/200     | 133 ++++++++++++++++++++++++++++++++++++++++++++++++++++
> >  tests/btrfs/200.out |  17 +++++++
> >  tests/btrfs/group   |   1 +
> >  3 files changed, 151 insertions(+)
> >  create mode 100755 tests/btrfs/200
> >  create mode 100644 tests/btrfs/200.out
> >
> > diff --git a/tests/btrfs/200 b/tests/btrfs/200
> > new file mode 100755
> > index 00000000..e7853c4b
> > --- /dev/null
> > +++ b/tests/btrfs/200
> > @@ -0,0 +1,133 @@
> > +#! /bin/bash
> > +# SPDX-License-Identifier: GPL-2.0
> > +# Copyright (C) 2019 SUSE Linux Products GmbH. All Rights Reserved.
> > +#
> > +# FS QA Test No. 200
> > +#
> > +# Check that send operations (full and incremental) are able to issue clone
> > +# operations for extents that are shared between the same file.
> > +#
> > +seq=`basename $0`
> > +seqres=$RESULT_DIR/$seq
> > +echo "QA output created by $seq"
> > +tmp=/tmp/$$
> > +status=1     # failure is the default!
> > +trap "_cleanup; exit \$status" 0 1 2 3 15
> > +
> > +_cleanup()
> > +{
> > +     cd /
> > +     rm -f $tmp.*
> > +     rm -fr $send_files_dir
> > +}
> > +
> > +# get standard environment, filters and checks
> > +. ./common/rc
> > +. ./common/filter
> > +. ./common/reflink
> > +. ./common/punch
> > +
> > +# real QA test starts here
> > +_supported_fs btrfs
> > +_supported_os Linux
> > +_require_fssum
> > +_require_test
> > +_require_scratch_reflink
> > +_require_xfs_io_command "fiemap"
> > +
> > +count_extents()
> > +{
> > +     $XFS_IO_PROG -r -c "fiemap" $1 | tail -n +2 | wc -l
> > +}
>
> There's a similar in common/rc called _count_extents(), but it opens
> file with rw permission. Perhaps you could just update the existing
> helper? (And add '-r' to _count_holes() and _count_attr_extents()?)

Indeed, I was looking at fiemap filters (in common/punch) searching
for such functionality, but apparently missed common/rc.
Yes, it serves well and it's basically the same I made.

>
> > +
> > +count_exclusive_extents()
> > +{
> > +     $XFS_IO_PROG -r -c "fiemap" $1 | tail -n +2 | cut -d ' ' -f 3 \
> > +             | sort | uniq | wc -l
> > +}
>
> And maybe add this one to common helper too.

Yes, I'll send a new patchset soon for that.

Thanks.

>
> Otherwise looks good to me.
>
> Thanks,
> Eryu
>
> > +
> > +send_files_dir=$TEST_DIR/btrfs-test-$seq
> > +
> > +rm -f $seqres.full
> > +rm -fr $send_files_dir
> > +mkdir $send_files_dir
> > +
> > +_scratch_mkfs >>$seqres.full 2>&1
> > +_scratch_mount
> > +
> > +# Create our first test file, which has an extent that is shared only with
> > +# itself and no other files. We want to verify a full send operation will
> > +# clone the extent.
> > +$XFS_IO_PROG -f -c "pwrite -S 0xb1 -b 64K 0 64K" $SCRATCH_MNT/foo \
> > +     | _filter_xfs_io
> > +$XFS_IO_PROG -c "reflink $SCRATCH_MNT/foo 0 64K 64K" $SCRATCH_MNT/foo \
> > +     | _filter_xfs_io
> > +
> > +# Create out second test file which initially, for the first send operation,
> > +# only has a single extent that is not shared.
> > +$XFS_IO_PROG -f -c "pwrite -S 0xc7 -b 64K 0 64K" $SCRATCH_MNT/bar \
> > +     | _filter_xfs_io
> > +
> > +$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/base 2>&1 \
> > +     | _filter_scratch
> > +
> > +$BTRFS_UTIL_PROG send -f $send_files_dir/1.snap $SCRATCH_MNT/base 2>&1 \
> > +     | _filter_scratch
> > +
> > +# Now clone the existing extent in file bar to itself at a different offset.
> > +# We want to verify the incremental send operation below will issue a clone
> > +# operation instead of a write operation.
> > +$XFS_IO_PROG -c "reflink $SCRATCH_MNT/bar 0 64K 64K" $SCRATCH_MNT/bar \
> > +     | _filter_xfs_io
> > +
> > +$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/incr 2>&1 \
> > +     | _filter_scratch
> > +
> > +$BTRFS_UTIL_PROG send -p $SCRATCH_MNT/base -f $send_files_dir/2.snap \
> > +     $SCRATCH_MNT/incr 2>&1 | _filter_scratch
> > +
> > +# Compute digests of the snapshot trees so that later we can compare against
> > +# digests of the trees in the new filesystem, to see if they match (no data or
> > +# metadata corruption happened).
> > +$FSSUM_PROG -A -f -w $send_files_dir/base.fssum $SCRATCH_MNT/base
> > +$FSSUM_PROG -A -f -w $send_files_dir/incr.fssum \
> > +     -x $SCRATCH_MNT/incr/base $SCRATCH_MNT/incr
> > +
> > +# Now recreate the filesystem by receiving both send streams and verify we get
> > +# the same file contents that the original filesystem had and that files foo
> > +# and bar have shared extents.
> > +_scratch_unmount
> > +_scratch_mkfs >>$seqres.full 2>&1
> > +_scratch_mount
> > +
> > +$BTRFS_UTIL_PROG receive -f $send_files_dir/1.snap $SCRATCH_MNT
> > +$BTRFS_UTIL_PROG receive -f $send_files_dir/2.snap $SCRATCH_MNT
> > +
> > +# Compute digests of the snapshot trees in the new filesystem and compare them
> > +# to the ones in the original filesystem, they must match.
> > +$FSSUM_PROG -r $send_files_dir/base.fssum $SCRATCH_MNT/base
> > +$FSSUM_PROG -r $send_files_dir/incr.fssum $SCRATCH_MNT/incr
> > +
> > +num_extents=$(count_extents $SCRATCH_MNT/base/foo)
> > +num_exclusive_extents=$(count_exclusive_extents $SCRATCH_MNT/base/foo)
> > +if [ $num_extents -ne 2 ] || [ $num_exclusive_extents -ne 1 ]; then
> > +     echo "File foo does not have 2 shared extents in the base snapshot"
> > +     $XFS_IO_PROG -r -c "fiemap" $SCRATCH_MNT/base/foo
> > +fi
> > +
> > +num_extents=$(count_extents $SCRATCH_MNT/incr/foo)
> > +num_exclusive_extents=$(count_exclusive_extents $SCRATCH_MNT/incr/foo)
> > +if [ $num_extents -ne 2 ] || [ $num_exclusive_extents -ne 1 ]; then
> > +     echo "File foo does not have 2 shared extents in the incr snapshot"
> > +     $XFS_IO_PROG -r -c "fiemap" $SCRATCH_MNT/incr/foo
> > +fi
> > +
> > +num_extents=$(count_extents $SCRATCH_MNT/incr/bar)
> > +num_exclusive_extents=$(count_exclusive_extents $SCRATCH_MNT/incr/bar)
> > +if [ $num_extents -ne 2 ] || [ $num_exclusive_extents -ne 1 ]; then
> > +     echo "File bar does not have 2 shared extents in the incr snapshot"
> > +     $XFS_IO_PROG -r -c "fiemap" $SCRATCH_MNT/incr/bar
> > +fi
> > +
> > +status=0
> > +exit
> > diff --git a/tests/btrfs/200.out b/tests/btrfs/200.out
> > new file mode 100644
> > index 00000000..3eec567e
> > --- /dev/null
> > +++ b/tests/btrfs/200.out
> > @@ -0,0 +1,17 @@
> > +QA output created by 200
> > +wrote 65536/65536 bytes at offset 0
> > +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> > +linked 65536/65536 bytes at offset 65536
> > +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> > +wrote 65536/65536 bytes at offset 0
> > +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> > +Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/base'
> > +At subvol SCRATCH_MNT/base
> > +linked 65536/65536 bytes at offset 65536
> > +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> > +Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/incr'
> > +At subvol SCRATCH_MNT/incr
> > +At subvol base
> > +At snapshot incr
> > +OK
> > +OK
> > diff --git a/tests/btrfs/group b/tests/btrfs/group
> > index c7ab129e..d56dcafa 100644
> > --- a/tests/btrfs/group
> > +++ b/tests/btrfs/group
> > @@ -202,3 +202,4 @@
> >  197 auto quick volume
> >  198 auto quick volume
> >  199 auto quick trim
> > +200 auto quick send clone
> > --
> > 2.11.0
> >