* cannot mount after freeze
@ 2021-07-16 11:12 bw
2021-07-16 12:26 ` Qu Wenruo
0 siblings, 1 reply; 5+ messages in thread
From: bw @ 2021-07-16 11:12 UTC (permalink / raw)
To: linux-btrfs
[-- Attachment #1: Type: text/plain, Size: 872 bytes --]
Hello,
My raid1 with 3 hdd's that contain /home and /data cannot be mounted
after a freeze/restart on the 14 of juli
My root / (ubuntu 20.10) is on a raid with 2 ssd's so I can boot but I
always end up in rescue mode atm. When disabling the two mounts (/data
and /home) in fstab i can log in as root. (had to first change the
root password via a rescue usb in order to log in)
smartctl seam to say the disks are ok but i'm still unable to mount.
scrub doesnt see any errors
I have installed btrfsmaintanance btw.
Can anyone advice me which steps to take in order to save the data?
There is no backup (yes I'm a fool but was under the impression that
with a copy of each file on 2 different disks I'll survive)
Attached all(?) important files + a history of my attempts the past
days. My attempts from the system rescue usb are not in though.
kind regards,
Bastiaan
[-- Attachment #2: btrfs_fi_show --]
[-- Type: application/octet-stream, Size: 469 bytes --]
Label: none uuid: 1aac59dd-c195-4b8a-91ff-2968493d968e
Total devices 2 FS bytes used 166.18GiB
devid 1 size 119.00GiB used 91.03GiB path /dev/sdd2
devid 2 size 119.24GiB used 91.00GiB path /dev/sda
Label: none uuid: 6df1a099-37c5-44c8-912c-ca76d0ed05ce
Total devices 3 FS bytes used 742.88GiB
devid 2 size 1.82TiB used 538.03GiB path /dev/sde
devid 3 size 1.82TiB used 545.00GiB path /dev/sdb
devid 4 size 1.82TiB used 445.03GiB path /dev/sdc
[-- Attachment #3: btrfs_fi_df_home --]
[-- Type: application/octet-stream, Size: 189 bytes --]
Data, single: total=174.00GiB, used=159.69GiB
System, single: total=32.00MiB, used=48.00KiB
Metadata, single: total=8.00GiB, used=6.49GiB
GlobalReserve, single: total=512.00MiB, used=0.00B
[-- Attachment #4: btrfs_version --]
[-- Type: application/octet-stream, Size: 18 bytes --]
btrfs-progs v5.7
[-- Attachment #5: dmesg.log --]
[-- Type: text/x-log, Size: 102681 bytes --]
[ 1.000000] microcode: microcode updated early to revision 0x28, date = 2019-11-12
[ 0.000000] Linux version 5.8.0-59-generic (buildd@lcy01-amd64-023) (gcc (Ubuntu 10.2.0-13ubuntu1) 10.2.0, GNU ld (GNU Binutils for Ubuntu) 2.35.1) #66-Ubuntu SMP Thu Jun 17 00:46:01 UTC 2021 (Ubuntu 5.8.0-59.66-generic 5.8.18)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.8.0-59-generic root=UUID=1aac59dd-c195-4b8a-91ff-2968493d968e ro rootflags=subvol=@
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009d494fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009d495000-0x000000009d49bfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009d49c000-0x000000009d8fbfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009d8fc000-0x000000009dd71fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009dd72000-0x00000000bdacafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bdacb000-0x00000000bdcdafff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bdcdb000-0x00000000bdcf8fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bdcf9000-0x00000000be221fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000be222000-0x00000000beffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000befff000-0x00000000beffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: ASUS All Series/Z97-A, BIOS 2801 11/11/2015
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3997.954 MHz processor
[ 0.000674] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000674] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000679] last_pfn = 0x43f000 max_arch_pfn = 0x400000000
[ 0.000682] MTRR default type: uncachable
[ 0.000682] MTRR fixed ranges enabled:
[ 0.000683] 00000-9FFFF write-back
[ 0.000683] A0000-BFFFF uncachable
[ 0.000684] C0000-CFFFF write-protect
[ 0.000684] D0000-E7FFF uncachable
[ 0.000684] E8000-FFFFF write-protect
[ 0.000685] MTRR variable ranges enabled:
[ 0.000686] 0 base 0000000000 mask 7C00000000 write-back
[ 0.000686] 1 base 0400000000 mask 7FE0000000 write-back
[ 0.000687] 2 base 0420000000 mask 7FF0000000 write-back
[ 0.000687] 3 base 0430000000 mask 7FF8000000 write-back
[ 0.000687] 4 base 0438000000 mask 7FFC000000 write-back
[ 0.000688] 5 base 043C000000 mask 7FFE000000 write-back
[ 0.000688] 6 base 043E000000 mask 7FFF000000 write-back
[ 0.000689] 7 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000689] 8 disabled
[ 0.000689] 9 disabled
[ 0.000914] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001226] total RAM covered: 16368M
[ 0.001457] Found optimal setting for mtrr clean up
[ 0.001457] gran_size: 64K chunk_size: 32M num_reg: 6 lose cover RAM: 0G
[ 0.001708] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[ 0.001711] last_pfn = 0xbf000 max_arch_pfn = 0x400000000
[ 0.006543] found SMP MP-table at [mem 0x000fd900-0x000fd90f]
[ 0.022456] check: Scanning 1 areas for low memory corruption
[ 0.022460] Using GB pages for direct mapping
[ 0.022863] RAMDISK: [mem 0x33741000-0x35b97fff]
[ 0.022866] ACPI: Early table checksum verification disabled
[ 0.022869] ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA)
[ 0.022871] ACPI: XSDT 0x00000000BDCE1080 00007C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.022874] ACPI: FACP 0x00000000BDCF0DF0 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.022878] ACPI: DSDT 0x00000000BDCE1198 00FC58 (v02 ALASKA A M I 00000011 INTL 20120711)
[ 0.022880] ACPI: FACS 0x00000000BE221F80 000040
[ 0.022881] ACPI: APIC 0x00000000BDCF0F00 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.022883] ACPI: FPDT 0x00000000BDCF0F98 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.022885] ACPI: SSDT 0x00000000BDCF0FE0 000C7D (v01 Ther_R Ther_Rvp 00001000 INTL 20120711)
[ 0.022887] ACPI: SSDT 0x00000000BDCF1C60 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.022888] ACPI: SSDT 0x00000000BDCF21A0 000B74 (v01 CpuRef CpuSsdt 00003000 INTL 20051117)
[ 0.022890] ACPI: MCFG 0x00000000BDCF2D18 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.022892] ACPI: HPET 0x00000000BDCF2D58 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.022893] ACPI: SSDT 0x00000000BDCF2D90 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
[ 0.022895] ACPI: SSDT 0x00000000BDCF3100 005977 (v01 SaSsdt SaSsdt 00003000 INTL 20120711)
[ 0.022897] ACPI: UEFI 0x00000000BDCF8AD0 000042 (v01 ALASKA A M I 01072009 00000000)
[ 0.022898] ACPI: Reserving FACP table memory at [mem 0xbdcf0df0-0xbdcf0efb]
[ 0.022899] ACPI: Reserving DSDT table memory at [mem 0xbdce1198-0xbdcf0def]
[ 0.022900] ACPI: Reserving FACS table memory at [mem 0xbe221f80-0xbe221fbf]
[ 0.022900] ACPI: Reserving APIC table memory at [mem 0xbdcf0f00-0xbdcf0f91]
[ 0.022901] ACPI: Reserving FPDT table memory at [mem 0xbdcf0f98-0xbdcf0fdb]
[ 0.022901] ACPI: Reserving SSDT table memory at [mem 0xbdcf0fe0-0xbdcf1c5c]
[ 0.022902] ACPI: Reserving SSDT table memory at [mem 0xbdcf1c60-0xbdcf2198]
[ 0.022902] ACPI: Reserving SSDT table memory at [mem 0xbdcf21a0-0xbdcf2d13]
[ 0.022903] ACPI: Reserving MCFG table memory at [mem 0xbdcf2d18-0xbdcf2d53]
[ 0.022903] ACPI: Reserving HPET table memory at [mem 0xbdcf2d58-0xbdcf2d8f]
[ 0.022904] ACPI: Reserving SSDT table memory at [mem 0xbdcf2d90-0xbdcf30fc]
[ 0.022904] ACPI: Reserving SSDT table memory at [mem 0xbdcf3100-0xbdcf8a76]
[ 0.022905] ACPI: Reserving UEFI table memory at [mem 0xbdcf8ad0-0xbdcf8b11]
[ 0.022911] ACPI: Local APIC address 0xfee00000
[ 0.022945] No NUMA configuration found
[ 0.022945] Faking a node at [mem 0x0000000000000000-0x000000043effffff]
[ 0.022952] NODE_DATA(0) allocated [mem 0x43efd4000-0x43effdfff]
[ 0.023147] Zone ranges:
[ 0.023147] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.023148] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.023149] Normal [mem 0x0000000100000000-0x000000043effffff]
[ 0.023149] Device empty
[ 0.023150] Movable zone start for each node
[ 0.023152] Early memory node ranges
[ 0.023153] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.023153] node 0: [mem 0x0000000000100000-0x000000009d494fff]
[ 0.023154] node 0: [mem 0x000000009d49c000-0x000000009d8fbfff]
[ 0.023154] node 0: [mem 0x000000009dd72000-0x00000000bdacafff]
[ 0.023155] node 0: [mem 0x00000000befff000-0x00000000beffffff]
[ 0.023155] node 0: [mem 0x0000000100000000-0x000000043effffff]
[ 0.023157] Initmem setup node 0 [mem 0x0000000000001000-0x000000043effffff]
[ 0.023158] On node 0 totalpages: 4179435
[ 0.023159] DMA zone: 64 pages used for memmap
[ 0.023159] DMA zone: 21 pages reserved
[ 0.023159] DMA zone: 3996 pages, LIFO batch:0
[ 0.023337] DMA zone: 28772 pages in unavailable ranges
[ 0.023338] DMA32 zone: 12058 pages used for memmap
[ 0.023338] DMA32 zone: 771663 pages, LIFO batch:63
[ 0.028838] DMA32 zone: 10673 pages in unavailable ranges
[ 0.028840] Normal zone: 53184 pages used for memmap
[ 0.028840] Normal zone: 3403776 pages, LIFO batch:63
[ 0.053677] Normal zone: 4096 pages in unavailable ranges
[ 0.053753] ACPI: PM-Timer IO Port: 0x1808
[ 0.053755] ACPI: Local APIC address 0xfee00000
[ 0.053759] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.053768] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.053770] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.053771] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.053772] ACPI: IRQ0 used by override.
[ 0.053772] ACPI: IRQ9 used by override.
[ 0.053773] Using ACPI (MADT) for SMP configuration information
[ 0.053774] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.053777] TSC deadline timer available
[ 0.053778] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.053790] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.053791] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.053791] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.053792] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.053792] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.053793] PM: hibernation: Registered nosave memory: [mem 0x9d495000-0x9d49bfff]
[ 0.053794] PM: hibernation: Registered nosave memory: [mem 0x9d8fc000-0x9dd71fff]
[ 0.053795] PM: hibernation: Registered nosave memory: [mem 0xbdacb000-0xbdcdafff]
[ 0.053796] PM: hibernation: Registered nosave memory: [mem 0xbdcdb000-0xbdcf8fff]
[ 0.053796] PM: hibernation: Registered nosave memory: [mem 0xbdcf9000-0xbe221fff]
[ 0.053797] PM: hibernation: Registered nosave memory: [mem 0xbe222000-0xbeffefff]
[ 0.053798] PM: hibernation: Registered nosave memory: [mem 0xbf000000-0xdfffffff]
[ 0.053798] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.053799] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.053799] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.053800] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.053800] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.053800] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.053801] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.053801] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.053802] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.053802] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.053803] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.053804] [mem 0xbf000000-0xdfffffff] available for PCI devices
[ 0.053805] Booting paravirtualized kernel on bare hardware
[ 0.053807] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.053812] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.053969] percpu: Embedded 56 pages/cpu s192512 r8192 d28672 u262144
[ 0.053973] pcpu-alloc: s192512 r8192 d28672 u262144 alloc=1*2097152
[ 0.053973] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.053991] Built 1 zonelists, mobility grouping on. Total pages: 4114108
[ 0.053991] Policy zone: Normal
[ 0.053992] Kernel command line: BOOT_IMAGE=/vmlinuz-5.8.0-59-generic root=UUID=1aac59dd-c195-4b8a-91ff-2968493d968e ro rootflags=subvol=@
[ 0.054688] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.055022] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.055069] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.092239] Memory: 16288860K/16717740K available (14339K kernel code, 2537K rwdata, 8880K rodata, 2652K init, 4904K bss, 428880K reserved, 0K cma-reserved)
[ 0.092245] random: get_random_u64 called from kmem_cache_open+0x2b/0x240 with crng_init=0
[ 0.092332] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.092342] Kernel/User page tables isolation: enabled
[ 0.092353] ftrace: allocating 48904 entries in 192 pages
[ 0.103340] ftrace: allocated 192 pages with 2 groups
[ 0.103423] rcu: Hierarchical RCU implementation.
[ 0.103424] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[ 0.103424] Trampoline variant of Tasks RCU enabled.
[ 0.103425] Rude variant of Tasks RCU enabled.
[ 0.103425] Tracing variant of Tasks RCU enabled.
[ 0.103426] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.103426] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.105348] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
[ 0.105583] random: crng done (trusting CPU's manufacturer)
[ 0.105597] spurious 8259A interrupt: IRQ7.
[ 0.108919] Console: colour VGA+ 80x25
[ 0.117443] printk: console [tty0] enabled
[ 0.117499] ACPI: Core revision 20200528
[ 0.117624] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.117686] APIC: Switch to symmetric I/O mode setup
[ 0.117793] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.118163] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.137685] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x7341a23f60c, max_idle_ns: 881591042212 ns
[ 0.137741] Calibrating delay loop (skipped), value calculated using timer frequency.. 7995.90 BogoMIPS (lpj=15991816)
[ 0.137795] pid_max: default: 32768 minimum: 301
[ 0.137857] LSM: Security Framework initializing
[ 0.137907] Yama: becoming mindful.
[ 0.137966] AppArmor: AppArmor initialized
[ 0.138051] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.138128] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.138350] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.138405] process: using mwait in idle threads
[ 0.138450] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.138496] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.138543] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.138596] Spectre V2 : Mitigation: Full generic retpoline
[ 0.138641] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.138693] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.138740] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.138792] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.138838] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.138892] SRBDS: Mitigation: Microcode
[ 0.138937] MDS: Mitigation: Clear CPU buffers
[ 0.139120] Freeing SMP alternatives memory: 40K
[ 0.141786] smpboot: CPU0: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[ 0.141912] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.141976] ... version: 3
[ 0.142020] ... bit width: 48
[ 0.142064] ... generic registers: 4
[ 0.142109] ... value mask: 0000ffffffffffff
[ 0.142154] ... max period: 00007fffffffffff
[ 0.142199] ... fixed-purpose events: 3
[ 0.142244] ... event mask: 000000070000000f
[ 0.142309] rcu: Hierarchical SRCU implementation.
[ 0.142934] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.143027] smp: Bringing up secondary CPUs ...
[ 0.143126] x86: Booting SMP configuration:
[ 0.143171] .... node #0, CPUs: #1 #2 #3 #4
[ 0.147031] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.147031] #5 #6 #7
[ 0.147031] smp: Brought up 1 node, 8 CPUs
[ 0.147031] smpboot: Max logical packages: 1
[ 0.147031] smpboot: Total of 8 processors activated (63967.26 BogoMIPS)
[ 0.150139] devtmpfs: initialized
[ 0.150139] x86/mm: Memory block size: 128MB
[ 0.150495] PM: Registering ACPI NVS region [mem 0x9d495000-0x9d49bfff] (28672 bytes)
[ 0.150495] PM: Registering ACPI NVS region [mem 0xbdcf9000-0xbe221fff] (5410816 bytes)
[ 0.150495] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.150495] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.150495] pinctrl core: initialized pinctrl subsystem
[ 0.150495] PM: RTC time: 12:48:49, date: 2021-07-15
[ 0.150495] thermal_sys: Registered thermal governor 'fair_share'
[ 0.150495] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.150495] thermal_sys: Registered thermal governor 'step_wise'
[ 0.150495] thermal_sys: Registered thermal governor 'user_space'
[ 0.150495] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.150495] NET: Registered protocol family 16
[ 0.150509] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[ 0.150637] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.150772] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.150828] audit: initializing netlink subsys (disabled)
[ 0.150877] audit: type=2000 audit(1626353329.032:1): state=initialized audit_enabled=0 res=1
[ 0.150877] EISA bus registered
[ 0.150877] cpuidle: using governor ladder
[ 0.150877] cpuidle: using governor menu
[ 0.150877] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.150877] ACPI: bus type PCI registered
[ 0.150877] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.150877] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.150877] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.150877] PCI: Using configuration type 1 for base access
[ 0.150877] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.150877] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.154121] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.154121] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.154121] ACPI: Added _OSI(Module Device)
[ 0.154121] ACPI: Added _OSI(Processor Device)
[ 0.154121] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.154121] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.154121] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.154121] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.154121] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.166394] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.168383] ACPI: Dynamic OEM Table Load:
[ 0.168431] ACPI: SSDT 0xFFFF8A8F2C151C00 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.169279] ACPI: Dynamic OEM Table Load:
[ 0.169326] ACPI: SSDT 0xFFFF8A8F2D00D800 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.170222] ACPI: Dynamic OEM Table Load:
[ 0.170269] ACPI: SSDT 0xFFFF8A8F2C0C9200 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.172215] ACPI: EC: EC started
[ 0.172260] ACPI: EC: interrupt blocked
[ 0.172316] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.172362] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
[ 0.172414] ACPI: Interpreter enabled
[ 0.172480] ACPI: (supports S0 S3 S4 S5)
[ 0.172524] ACPI: Using IOAPIC for interrupt routing
[ 0.172590] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.172884] ACPI: Enabled 12 GPEs in block 00 to 3F
[ 0.173711] ACPI: Power Resource [PG00] (on)
[ 0.173978] ACPI: Power Resource [PG01] (on)
[ 0.174251] ACPI: Power Resource [PG02] (on)
[ 0.180608] ACPI: Power Resource [FN00] (off)
[ 0.180710] ACPI: Power Resource [FN01] (off)
[ 0.180810] ACPI: Power Resource [FN02] (off)
[ 0.180908] ACPI: Power Resource [FN03] (off)
[ 0.181009] ACPI: Power Resource [FN04] (off)
[ 0.181948] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.181999] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.182261] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
[ 0.182452] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
[ 0.182499] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.183100] PCI host bridge to bus 0000:00
[ 0.183145] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.183192] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.183239] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.183291] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.183343] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.183395] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.183447] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.183499] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.183551] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.183603] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff window]
[ 0.183655] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.183707] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[ 0.183817] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.183891] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.184055] pci 0000:00:14.0: [8086:8cb1] type 00 class 0x0c0330
[ 0.184120] pci 0000:00:14.0: reg 0x10: [mem 0xdff20000-0xdff2ffff 64bit]
[ 0.184217] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.184325] pci 0000:00:16.0: [8086:8cba] type 00 class 0x078000
[ 0.184396] pci 0000:00:16.0: reg 0x10: [mem 0xdff3a000-0xdff3a00f 64bit]
[ 0.184492] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.184616] pci 0000:00:19.0: [8086:15a1] type 00 class 0x020000
[ 0.184676] pci 0000:00:19.0: reg 0x10: [mem 0xdff00000-0xdff1ffff]
[ 0.184727] pci 0000:00:19.0: reg 0x14: [mem 0xdff38000-0xdff38fff]
[ 0.184779] pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f]
[ 0.185786] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.185902] pci 0000:00:1a.0: [8086:8cad] type 00 class 0x0c0320
[ 0.185966] pci 0000:00:1a.0: reg 0x10: [mem 0xdff37000-0xdff373ff]
[ 0.186080] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.186189] pci 0000:00:1b.0: [8086:8ca0] type 00 class 0x040300
[ 0.186250] pci 0000:00:1b.0: reg 0x10: [mem 0xdff30000-0xdff33fff 64bit]
[ 0.186354] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.186474] pci 0000:00:1c.0: [8086:8c90] type 01 class 0x060400
[ 0.186583] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.186737] pci 0000:00:1c.3: [8086:244e] type 01 class 0x060401
[ 0.186856] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.187006] pci 0000:00:1c.6: [8086:8c9c] type 01 class 0x060400
[ 0.187116] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.187267] pci 0000:00:1d.0: [8086:8ca6] type 00 class 0x0c0320
[ 0.187330] pci 0000:00:1d.0: reg 0x10: [mem 0xdff36000-0xdff363ff]
[ 0.187444] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.187552] pci 0000:00:1f.0: [8086:8cc4] type 00 class 0x060100
[ 0.187741] pci 0000:00:1f.2: [8086:8c82] type 00 class 0x010601
[ 0.187798] pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
[ 0.187856] pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
[ 0.187906] pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
[ 0.187957] pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
[ 0.188007] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
[ 0.188057] pci 0000:00:1f.2: reg 0x24: [mem 0xdff35000-0xdff357ff]
[ 0.188130] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.188229] pci 0000:00:1f.3: [8086:8ca2] type 00 class 0x0c0500
[ 0.188289] pci 0000:00:1f.3: reg 0x10: [mem 0xdff34000-0xdff340ff 64bit]
[ 0.188350] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 0.188483] pci 0000:01:00.0: [1002:67ef] type 00 class 0x030000
[ 0.188548] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.188607] pci 0000:01:00.0: reg 0x18: [mem 0xd0000000-0xd01fffff 64bit pref]
[ 0.188663] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
[ 0.188713] pci 0000:01:00.0: reg 0x24: [mem 0xdfe00000-0xdfe3ffff]
[ 0.188764] pci 0000:01:00.0: reg 0x30: [mem 0xdfe40000-0xdfe5ffff pref]
[ 0.188867] pci 0000:01:00.0: supports D1 D2
[ 0.188912] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.189025] pci 0000:01:00.1: [1002:aae0] type 00 class 0x040300
[ 0.189086] pci 0000:01:00.1: reg 0x10: [mem 0xdfe60000-0xdfe63fff 64bit]
[ 0.189191] pci 0000:01:00.1: supports D1 D2
[ 0.189295] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.189342] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.189388] pci 0000:00:01.0: bridge window [mem 0xdfe00000-0xdfefffff]
[ 0.189436] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
[ 0.189556] acpiphp: Slot [1] registered
[ 0.189603] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.189694] pci 0000:03:00.0: [1b21:1080] type 01 class 0x060401
[ 0.189894] pci 0000:00:1c.3: PCI bridge to [bus 03-04] (subtractive decode)
[ 0.189947] pci 0000:00:1c.3: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.190000] pci 0000:00:1c.3: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.190052] pci 0000:00:1c.3: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.190106] pci 0000:00:1c.3: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.190159] pci 0000:00:1c.3: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.190212] pci 0000:00:1c.3: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.190265] pci 0000:00:1c.3: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.190319] pci 0000:00:1c.3: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 0.190372] pci 0000:00:1c.3: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[ 0.190425] pci 0000:00:1c.3: bridge window [mem 0xc0000000-0xfeafffff window] (subtractive decode)
[ 0.190502] pci_bus 0000:04: extended config space not accessible
[ 0.190611] pci 0000:03:00.0: PCI bridge to [bus 04] (subtractive decode)
[ 0.190672] pci 0000:03:00.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.190725] pci 0000:03:00.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.190778] pci 0000:03:00.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.190831] pci 0000:03:00.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.190893] pci 0000:03:00.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.190946] pci 0000:03:00.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.190999] pci 0000:03:00.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.191053] pci 0000:03:00.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 0.191106] pci 0000:03:00.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[ 0.191161] pci 0000:03:00.0: bridge window [mem 0xc0000000-0xfeafffff window] (subtractive decode)
[ 0.191301] pci 0000:05:00.0: [168c:0024] type 00 class 0x028000
[ 0.191378] pci 0000:05:00.0: reg 0x10: [mem 0xdfd00000-0xdfd0ffff 64bit]
[ 0.191543] pci 0000:05:00.0: supports D1
[ 0.191588] pci 0000:05:00.0: PME# supported from D0 D1 D3hot
[ 0.191747] pci 0000:00:1c.6: PCI bridge to [bus 05]
[ 0.191796] pci 0000:00:1c.6: bridge window [mem 0xdfd00000-0xdfdfffff]
[ 0.192479] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.192570] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.192659] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 10 11 12 14 15)
[ 0.192747] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.192836] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.192926] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.193014] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.193103] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.193430] ACPI: EC: interrupt unblocked
[ 0.193476] ACPI: EC: event unblocked
[ 0.193523] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.193568] ACPI: EC: GPE=0x1e
[ 0.193613] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC initialization complete
[ 0.193660] ACPI: \_SB_.PCI0.LPCB.EC0_: EC: Used to handle transactions and events
[ 0.193744] iommu: Default domain type: Translated
[ 0.193879] SCSI subsystem initialized
[ 0.193927] libata version 3.00 loaded.
[ 0.193927] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.193927] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.193927] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.193927] vgaarb: loaded
[ 0.193942] ACPI: bus type USB registered
[ 0.193995] usbcore: registered new interface driver usbfs
[ 0.194043] usbcore: registered new interface driver hub
[ 0.194091] usbcore: registered new device driver usb
[ 0.194147] pps_core: LinuxPPS API ver. 1 registered
[ 0.194193] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.194246] PTP clock support registered
[ 0.194298] EDAC MC: Ver: 3.0.0
[ 0.194298] NetLabel: Initializing
[ 0.194298] NetLabel: domain hash size = 128
[ 0.194298] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.194298] NetLabel: unlabeled traffic allowed by default
[ 0.194298] PCI: Using ACPI for IRQ routing
[ 0.199745] PCI: pci_cache_line_size set to 64 bytes
[ 0.199784] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.199785] e820: reserve RAM buffer [mem 0x9d495000-0x9fffffff]
[ 0.199785] e820: reserve RAM buffer [mem 0x9d8fc000-0x9fffffff]
[ 0.199786] e820: reserve RAM buffer [mem 0xbdacb000-0xbfffffff]
[ 0.199786] e820: reserve RAM buffer [mem 0xbf000000-0xbfffffff]
[ 0.199787] e820: reserve RAM buffer [mem 0x43f000000-0x43fffffff]
[ 0.199789] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.199789] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.201756] clocksource: Switched to clocksource tsc-early
[ 0.209954] VFS: Disk quotas dquot_6.6.0
[ 0.210011] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.210125] AppArmor: AppArmor Filesystem Enabled
[ 0.210190] pnp: PnP ACPI init
[ 0.210361] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.210411] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.210492] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.210540] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.210553] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.210578] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.210626] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.210707] system 00:04: [io 0x0290-0x029f] has been reserved
[ 0.210753] system 00:04: [io 0x02a0-0x02af] has been reserved
[ 0.210799] system 00:04: [io 0x0a00-0x0aff] has been reserved
[ 0.210847] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.210883] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.210930] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.211132] pnp 00:06: [dma 0 disabled]
[ 0.211157] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.211405] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.211452] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.211499] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.211545] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.211592] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.211639] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.211686] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.211732] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.211778] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[ 0.211825] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.211872] system 00:07: [mem 0xdffe0000-0xdffeffff] has been reserved
[ 0.211919] system 00:07: [mem 0xdfff0000-0xdfffffff] has been reserved
[ 0.211967] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.212119] pnp: PnP ACPI: found 8 devices
[ 0.217315] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.217401] NET: Registered protocol family 2
[ 0.217550] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.217658] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.217824] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.217920] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.218019] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.218092] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.218183] NET: Registered protocol family 1
[ 0.218231] NET: Registered protocol family 44
[ 0.218282] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.218328] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.218376] pci 0000:00:01.0: bridge window [mem 0xdfe00000-0xdfefffff]
[ 0.218423] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
[ 0.221928] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.221980] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.222039] pci 0000:00:1c.3: PCI bridge to [bus 03-04]
[ 0.222091] pci 0000:00:1c.6: PCI bridge to [bus 05]
[ 0.222139] pci 0000:00:1c.6: bridge window [mem 0xdfd00000-0xdfdfffff]
[ 0.222190] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.222236] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.222283] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.222329] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.222376] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.222423] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.222469] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.222516] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.222562] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.222609] pci_bus 0000:00: resource 13 [mem 0xc0000000-0xfeafffff window]
[ 0.222656] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.222702] pci_bus 0000:01: resource 1 [mem 0xdfe00000-0xdfefffff]
[ 0.222748] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref]
[ 0.222800] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window]
[ 0.222847] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window]
[ 0.222893] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.222939] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.222986] pci_bus 0000:03: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.223032] pci_bus 0000:03: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.223079] pci_bus 0000:03: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.223134] pci_bus 0000:03: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.223180] pci_bus 0000:03: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.223227] pci_bus 0000:03: resource 13 [mem 0xc0000000-0xfeafffff window]
[ 0.223274] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
[ 0.223321] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
[ 0.223367] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.223413] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.223460] pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.223507] pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.223553] pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.223600] pci_bus 0000:04: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.223647] pci_bus 0000:04: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.223694] pci_bus 0000:04: resource 13 [mem 0xc0000000-0xfeafffff window]
[ 0.223741] pci_bus 0000:05: resource 1 [mem 0xdfd00000-0xdfdfffff]
[ 0.245804] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x120 took 21302 usecs
[ 0.269814] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x120 took 23375 usecs
[ 0.269877] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.269933] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[ 0.269982] pci 0000:03:00.0: Disabling ASPM L0s/L1
[ 0.270032] PCI: CLS 64 bytes, default 64
[ 0.270130] Trying to unpack rootfs image as initramfs...
[ 2.163770] Freeing initrd memory: 37212K
[ 2.163820] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 2.163866] software IO TLB: mapped [mem 0xb9acb000-0xbdacb000] (64MB)
[ 2.164114] check: Scanning for low memory corruption every 60 seconds
[ 2.164452] Initialise system trusted keyrings
[ 2.164504] Key type blacklist registered
[ 2.164571] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[ 2.165337] zbud: loaded
[ 2.165525] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 2.165654] fuse: init (API version 7.31)
[ 2.165791] integrity: Platform Keyring initialized
[ 2.172509] Key type asymmetric registered
[ 2.172555] Asymmetric key parser 'x509' registered
[ 2.172604] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 2.172674] io scheduler mq-deadline registered
[ 2.173253] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.173329] intel_idle: MWAIT substates: 0x42120
[ 2.173330] intel_idle: v0.5.1 model 0x3C
[ 2.173541] intel_idle: Local APIC timer is reliable in all C-states
[ 2.173636] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 2.173701] ACPI: Power Button [PWRB]
[ 2.173788] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 2.173858] ACPI: Power Button [PWRF]
[ 2.174549] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.174596] ACPI: Thermal Zone [TZ00] (28 C)
[ 2.174821] thermal LNXTHERM:01: registered as thermal_zone1
[ 2.174867] ACPI: Thermal Zone [TZ01] (30 C)
[ 2.175013] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 2.195485] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 2.196640] Linux agpgart interface v0.103
[ 2.198186] loop: module loaded
[ 2.198408] libphy: Fixed MDIO Bus: probed
[ 2.198453] tun: Universal TUN/TAP device driver, 1.6
[ 2.198522] PPP generic driver version 2.4.2
[ 2.198589] VFIO - User Level meta-driver version: 0.3
[ 2.198668] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.198716] ehci-pci: EHCI PCI platform driver
[ 2.198833] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 2.198882] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 2.198949] ehci-pci 0000:00:1a.0: debug port 2
[ 2.202884] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 2.202937] ehci-pci 0000:00:1a.0: irq 16, io mem 0xdff37000
[ 2.217777] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.217850] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
[ 2.217903] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.217956] usb usb1: Product: EHCI Host Controller
[ 2.218001] usb usb1: Manufacturer: Linux 5.8.0-59-generic ehci_hcd
[ 2.218047] usb usb1: SerialNumber: 0000:00:1a.0
[ 2.218230] hub 1-0:1.0: USB hub found
[ 2.218278] hub 1-0:1.0: 2 ports detected
[ 2.218479] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 2.218527] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.218587] ehci-pci 0000:00:1d.0: debug port 2
[ 2.222537] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 2.222588] ehci-pci 0000:00:1d.0: irq 23, io mem 0xdff36000
[ 2.237778] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.237848] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
[ 2.237901] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.237954] usb usb2: Product: EHCI Host Controller
[ 2.237999] usb usb2: Manufacturer: Linux 5.8.0-59-generic ehci_hcd
[ 2.238045] usb usb2: SerialNumber: 0000:00:1d.0
[ 2.238221] hub 2-0:1.0: USB hub found
[ 2.238269] hub 2-0:1.0: 2 ports detected
[ 2.238401] ehci-platform: EHCI generic platform driver
[ 2.238454] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.238501] ohci-pci: OHCI PCI platform driver
[ 2.238551] ohci-platform: OHCI generic platform driver
[ 2.238600] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.238667] i8042: PNP: No PS/2 controller found.
[ 2.238873] mousedev: PS/2 mouse device common for all mice
[ 2.239186] rtc_cmos 00:02: RTC can wake from S4
[ 2.239382] rtc_cmos 00:02: registered as rtc0
[ 2.239466] rtc_cmos 00:02: setting system clock to 2021-07-15T12:48:51 UTC (1626353331)
[ 2.239527] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 2.239583] i2c /dev entries driver
[ 2.239650] device-mapper: uevent: version 1.0.3
[ 2.239726] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
[ 2.239789] platform eisa.0: Probing EISA bus 0
[ 2.239835] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 2.239882] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 2.239928] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 2.239975] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 2.240021] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 2.240068] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 2.240114] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 2.240161] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 2.240207] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 2.240254] platform eisa.0: EISA: Detected 0 cards
[ 2.240303] intel_pstate: Intel P-state driver initializing
[ 2.240858] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.241042] drop_monitor: Initializing network drop monitor service
[ 2.241440] NET: Registered protocol family 10
[ 2.245847] Segment Routing with IPv6
[ 2.245907] NET: Registered protocol family 17
[ 2.245985] Key type dns_resolver registered
[ 2.246365] microcode: sig=0x306c3, pf=0x2, revision=0x28
[ 2.246507] microcode: Microcode Update Driver: v2.2.
[ 2.246510] IPI shorthand broadcast: enabled
[ 2.246606] sched_clock: Marking stable (2234283998, 12221409)->(2271904196, -25398789)
[ 2.246747] registered taskstats version 1
[ 2.246803] Loading compiled-in X.509 certificates
[ 2.247424] Loaded X.509 cert 'Build time autogenerated kernel key: 5ea3bd2ce09c9554e207ad231b06e5cc4ef807e1'
[ 2.247932] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
[ 2.248437] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
[ 2.248512] zswap: loaded using pool lzo/zbud
[ 2.248644] Key type ._fscrypt registered
[ 2.248690] Key type .fscrypt registered
[ 2.248735] Key type fscrypt-provisioning registered
[ 2.251535] Key type encrypted registered
[ 2.251592] AppArmor: AppArmor sha1 policy hashing enabled
[ 2.251651] ima: No TPM chip found, activating TPM-bypass!
[ 2.251709] ima: Allocated hash algorithm: sha1
[ 2.251767] ima: No architecture policies found
[ 2.251830] evm: Initialising EVM extended attributes:
[ 2.251884] evm: security.selinux
[ 2.255667] evm: security.SMACK64
[ 2.255717] evm: security.SMACK64EXEC
[ 2.255767] evm: security.SMACK64TRANSMUTE
[ 2.255818] evm: security.SMACK64MMAP
[ 2.255868] evm: security.apparmor
[ 2.255918] evm: security.ima
[ 2.255967] evm: security.capability
[ 2.256018] evm: HMAC attrs: 0x1
[ 2.256777] PM: Magic number: 13:193:835
[ 2.257056] RAS: Correctable Errors collector initialized.
[ 2.258657] Freeing unused decrypted memory: 2040K
[ 2.259005] Freeing unused kernel image (initmem) memory: 2652K
[ 2.277841] Write protecting the kernel read-only data: 26624k
[ 2.279290] Freeing unused kernel image (text/rodata gap) memory: 2044K
[ 2.280108] Freeing unused kernel image (rodata/data gap) memory: 1360K
[ 2.454315] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.454400] x86/mm: Checking user space page tables
[ 2.485888] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.485942] Run /init as init process
[ 2.485987] with arguments:
[ 2.485987] /init
[ 2.485988] with environment:
[ 2.485988] HOME=/
[ 2.485988] TERM=linux
[ 2.485989] BOOT_IMAGE=/vmlinuz-5.8.0-59-generic
[ 2.552445] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.552498] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 2.553605] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[ 2.553665] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 2.553760] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 2.554073] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
[ 2.554132] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.554197] usb usb3: Product: xHCI Host Controller
[ 2.554247] usb usb3: Manufacturer: Linux 5.8.0-59-generic xhci-hcd
[ 2.554300] usb usb3: SerialNumber: 0000:00:14.0
[ 2.554473] hub 3-0:1.0: USB hub found
[ 2.554490] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 2.554552] hub 3-0:1.0: 14 ports detected
[ 2.554580] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 2.554845] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 2.555450] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.555502] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 2.555558] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 2.555650] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08
[ 2.555708] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.555762] usb usb4: Product: xHCI Host Controller
[ 2.555809] usb usb4: Manufacturer: Linux 5.8.0-59-generic xhci-hcd
[ 2.555855] usb usb4: SerialNumber: 0000:00:14.0
[ 2.555977] hub 4-0:1.0: USB hub found
[ 2.556034] hub 4-0:1.0: 6 ports detected
[ 2.556604] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20200528/utaddress-204)
[ 2.556680] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.556739] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C7F (\_GPE.GPBX) (20200528/utaddress-204)
[ 2.556806] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20200528/utaddress-204)
[ 2.556872] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.556932] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C7F (\_GPE.GPBX) (20200528/utaddress-204)
[ 2.557006] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20200528/utaddress-204)
[ 2.557076] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20200528/utaddress-204)
[ 2.557140] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.557195] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C7F (\_GPE.GPBX) (20200528/utaddress-204)
[ 2.557267] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20200528/utaddress-204)
[ 2.557342] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20200528/utaddress-204)
[ 2.557412] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.557468] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 2.558180] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[ 2.558265] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 2.558299] ahci 0000:00:1f.2: version 3.0
[ 2.558518] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 2.558584] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[ 2.558923] i2c i2c-0: 4/4 memory slots populated (from DMI)
[ 2.559276] i2c i2c-0: Successfully instantiated SPD at 0x50
[ 2.559629] i2c i2c-0: Successfully instantiated SPD at 0x51
[ 2.560121] i2c i2c-0: Successfully instantiated SPD at 0x52
[ 2.560515] i2c i2c-0: Successfully instantiated SPD at 0x53
[ 2.573756] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 2.622344] scsi host0: ahci
[ 2.622531] scsi host1: ahci
[ 2.622672] scsi host2: ahci
[ 2.622783] scsi host3: ahci
[ 2.622872] scsi host4: ahci
[ 2.622997] scsi host5: ahci
[ 2.623178] ata1: SATA max UDMA/133 abar m2048@0xdff35000 port 0xdff35100 irq 30
[ 2.623276] ata2: SATA max UDMA/133 abar m2048@0xdff35000 port 0xdff35180 irq 30
[ 2.623375] ata3: SATA max UDMA/133 abar m2048@0xdff35000 port 0xdff35200 irq 30
[ 2.623470] ata4: SATA max UDMA/133 abar m2048@0xdff35000 port 0xdff35280 irq 30
[ 2.623569] ata5: SATA max UDMA/133 abar m2048@0xdff35000 port 0xdff35300 irq 30
[ 2.623665] ata6: SATA max UDMA/133 abar m2048@0xdff35000 port 0xdff35380 irq 30
[ 2.629033] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 2.700566] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 10:c3:7b:6a:ee:2b
[ 2.700621] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 2.700693] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[ 2.710149] usb 1-1: New USB device found, idVendor=8087, idProduct=8009, bcdDevice= 0.00
[ 2.710224] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.710565] hub 1-1:1.0: USB hub found
[ 2.710773] hub 1-1:1.0: 6 ports detected
[ 2.722517] e1000e 0000:00:19.0 eno1: renamed from eth0
[ 2.730130] usb 2-1: New USB device found, idVendor=8087, idProduct=8001, bcdDevice= 0.00
[ 2.730184] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.730528] hub 2-1:1.0: USB hub found
[ 2.730759] hub 2-1:1.0: 8 ports detected
[ 2.889814] usb 3-9: new low-speed USB device number 2 using xhci_hcd
[ 2.937199] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.937306] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.937411] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.937517] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.937615] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.937711] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.937970] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT5._GTF.DSSP], AE_NOT_FOUND (20200528/psargs-330)
[ 2.938095] No Local Variables are initialized for Method [_GTF]
[ 2.938172] No Arguments are initialized for method [_GTF]
[ 2.938250] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT5._GTF due to previous error (AE_NOT_FOUND) (20200528/psparse-529)
[ 2.938737] ata6.00: ATA-8: ST1000DM010-2EP102, CC43, max UDMA/133
[ 2.938819] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 2.939834] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT4._GTF.DSSP], AE_NOT_FOUND (20200528/psargs-330)
[ 2.939957] No Local Variables are initialized for Method [_GTF]
[ 2.940034] No Arguments are initialized for method [_GTF]
[ 2.940112] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_NOT_FOUND) (20200528/psparse-529)
[ 2.940830] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT5._GTF.DSSP], AE_NOT_FOUND (20200528/psargs-330)
[ 2.940911] No Local Variables are initialized for Method [_GTF]
[ 2.940968] No Arguments are initialized for method [_GTF]
[ 2.941026] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT5._GTF due to previous error (AE_NOT_FOUND) (20200528/psparse-529)
[ 2.941110] ata4.00: supports DRM functions and may not be fully accessible
[ 2.941175] ata1.00: supports DRM functions and may not be fully accessible
[ 2.941395] ata6.00: configured for UDMA/133
[ 2.942218] ata1.00: ATA-11: Samsung SSD 860 PRO 256GB, RVM02B6Q, max UDMA/133
[ 2.942288] ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 2.945165] ata1.00: supports DRM functions and may not be fully accessible
[ 2.946132] ata4.00: disabling queued TRIM support
[ 2.946134] ata4.00: ATA-9: Samsung SSD 850 PRO 128GB, EXM02B6Q, max UDMA/133
[ 2.946196] ata4.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 2.948418] ata1.00: configured for UDMA/133
[ 2.948673] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 860 2B6Q PQ: 0 ANSI: 5
[ 2.948955] ata1.00: Enabling discard_zeroes_data
[ 2.948979] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.949197] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 2.951723] ata4.00: supports DRM functions and may not be fully accessible
[ 2.953230] sd 0:0:0:0: [sda] Write Protect is off
[ 2.953343] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.953360] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.958155] ata4.00: disabling queued TRIM support
[ 2.963161] ata4.00: configured for UDMA/133
[ 2.969958] ata1.00: Enabling discard_zeroes_data
[ 2.971027] ata1.00: Enabling discard_zeroes_data
[ 2.972206] sd 0:0:0:0: [sda] supports TCG Opal
[ 2.972270] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.975338] ata3.00: ATA-10: ST2000DM008-2FR102, 0001, max UDMA/133
[ 2.975405] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 2.975822] ata5.00: ATA-10: ST2000DM008-2FR102, 0001, max UDMA/133
[ 2.975888] ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 2.980671] ata2.00: ATA-10: ST2000DM008-2FR102, 0001, max UDMA/133
[ 2.980737] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 2.989730] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT4._GTF.DSSP], AE_NOT_FOUND (20200528/psargs-330)
[ 2.989835] No Local Variables are initialized for Method [_GTF]
[ 2.989899] No Arguments are initialized for method [_GTF]
[ 2.989962] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_NOT_FOUND) (20200528/psparse-529)
[ 3.025117] ata3.00: configured for UDMA/133
[ 3.025635] ata5.00: configured for UDMA/133
[ 3.034943] ata2.00: configured for UDMA/133
[ 3.035225] scsi 1:0:0:0: Direct-Access ATA ST2000DM008-2FR1 0001 PQ: 0 ANSI: 5
[ 3.035680] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 3.035706] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 3.035844] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 3.035940] sd 1:0:0:0: [sdb] Write Protect is off
[ 3.036006] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.036022] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.036116] scsi 2:0:0:0: Direct-Access ATA ST2000DM008-2FR1 0001 PQ: 0 ANSI: 5
[ 3.036506] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 3.036556] sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 3.036665] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[ 3.036745] sd 2:0:0:0: [sdc] Write Protect is off
[ 3.036826] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 3.036853] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.036910] scsi 3:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
[ 3.037426] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 3.037554] sd 3:0:0:0: [sdd] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 3.037686] sd 3:0:0:0: [sdd] Write Protect is off
[ 3.037784] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 3.037832] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.037853] scsi 4:0:0:0: Direct-Access ATA ST2000DM008-2FR1 0001 PQ: 0 ANSI: 5
[ 3.038436] sd 4:0:0:0: Attached scsi generic sg4 type 0
[ 3.038500] sd 4:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 3.038621] sd 4:0:0:0: [sde] 4096-byte physical blocks
[ 3.038713] sd 4:0:0:0: [sde] Write Protect is off
[ 3.038790] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 3.038816] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.038966] scsi 5:0:0:0: Direct-Access ATA ST1000DM010-2EP1 CC43 PQ: 0 ANSI: 5
[ 3.039563] sd 5:0:0:0: Attached scsi generic sg5 type 0
[ 3.039600] sd 5:0:0:0: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 3.039754] sd 5:0:0:0: [sdf] 4096-byte physical blocks
[ 3.039861] sd 5:0:0:0: [sdf] Write Protect is off
[ 3.039939] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[ 3.039966] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.048293] usb 3-9: New USB device found, idVendor=03f0, idProduct=354a, bcdDevice= 1.22
[ 3.048366] usb 3-9: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.048426] usb 3-9: Product: HP USB Slim Keyboard
[ 3.050189] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 3.064116] sdd: sdd1 sdd2
[ 3.065025] sd 3:0:0:0: [sdd] supports TCG Opal
[ 3.065096] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 3.070155] sd 5:0:0:0: [sdf] Attached SCSI disk
[ 3.071907] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 3.089326] sd 4:0:0:0: [sde] Attached SCSI disk
[ 3.165790] ata2.00: exception Emask 0x10 SAct 0x10000 SErr 0x680101 action 0x6 frozen
[ 3.165846] ata2.00: irq_stat 0x08000000, interface fatal error
[ 3.165892] ata2: SError: { RecovData UnrecovData 10B8B BadCRC Handshk }
[ 3.165940] ata2.00: failed command: READ FPDMA QUEUED
[ 3.165987] ata2.00: cmd 60/f8:80:08:01:00/00:00:00:00:00/40 tag 16 ncq dma 126976 in
res 40/00:80:08:01:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 3.166055] ata2.00: status: { DRDY }
[ 3.166102] ata2: hard resetting link
[ 3.177780] usb 3-13: new high-speed USB device number 3 using xhci_hcd
[ 3.189779] tsc: Refined TSC clocksource calibration: 3997.683 MHz
[ 3.189830] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x733fa1dc71e, max_idle_ns: 881590718958 ns
[ 3.189912] clocksource: Switched to clocksource tsc
[ 3.325992] usb 3-13: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3
[ 3.326066] usb 3-13: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.326885] hub 3-13:1.0: USB hub found
[ 3.326965] hub 3-13:1.0: 4 ports detected
[ 3.453770] usb 3-14: new high-speed USB device number 4 using xhci_hcd
[ 3.480534] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.571729] ata2.00: configured for UDMA/133
[ 3.571793] sd 1:0:0:0: [sdb] tag#16 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=0s
[ 3.571848] sd 1:0:0:0: [sdb] tag#16 Sense Key : Illegal Request [current]
[ 3.571895] sd 1:0:0:0: [sdb] tag#16 Add. Sense: Unaligned write command
[ 3.571943] sd 1:0:0:0: [sdb] tag#16 CDB: Read(10) 28 00 00 00 01 08 00 00 f8 00
[ 3.571996] blk_update_request: I/O error, dev sdb, sector 264 op 0x0:(READ) flags 0x80700 phys_seg 30 prio class 0
[ 3.572059] ata2: EH complete
[ 3.602644] usb 3-14: New USB device found, idVendor=0781, idProduct=5408, bcdDevice= 2.00
[ 3.602732] usb 3-14: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.602814] usb 3-14: Product: U3 Titanium
[ 3.602878] usb 3-14: Manufacturer: SanDisk
[ 3.602943] usb 3-14: SerialNumber: 43183311AD834157
[ 3.610339] hid: raw HID events driver (C) Jiri Kosina
[ 3.612123] usb-storage 3-14:1.0: USB Mass Storage device detected
[ 3.612262] scsi host6: usb-storage 3-14:1.0
[ 3.612405] usbcore: registered new interface driver usb-storage
[ 3.613919] usbcore: registered new interface driver uas
[ 3.617462] usbcore: registered new interface driver usbhid
[ 3.617513] usbhid: USB HID core driver
[ 3.619148] input: HP USB Slim Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.0/0003:03F0:354A.0001/input/input2
[ 3.678156] hid-generic 0003:03F0:354A.0001: input,hidraw0: USB HID v1.10 Keyboard [HP USB Slim Keyboard] on usb-0000:00:14.0-9/input0
[ 3.678905] input: HP USB Slim Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.1/0003:03F0:354A.0002/input/input3
[ 3.681797] usb 3-13.3: new high-speed USB device number 5 using xhci_hcd
[ 3.738075] input: HP USB Slim Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.1/0003:03F0:354A.0002/input/input4
[ 3.738419] input: HP USB Slim Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.1/0003:03F0:354A.0002/input/input5
[ 3.738814] hid-generic 0003:03F0:354A.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [HP USB Slim Keyboard] on usb-0000:00:14.0-9/input1
[ 3.785565] usb 3-13.3: New USB device found, idVendor=2109, idProduct=2811, bcdDevice=90.70
[ 3.785662] usb 3-13.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.785767] usb 3-13.3: Product: USB2.0 Hub
[ 3.785839] usb 3-13.3: Manufacturer: VIA Labs, Inc.
[ 3.787329] hub 3-13.3:1.0: USB hub found
[ 3.787730] hub 3-13.3:1.0: 4 ports detected
[ 3.873836] usb 3-13.4: new low-speed USB device number 6 using xhci_hcd
[ 3.978311] usb 3-13.4: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00
[ 3.978413] usb 3-13.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.978508] usb 3-13.4: Product: USB Optical Mouse
[ 3.978582] usb 3-13.4: Manufacturer: Logitech
[ 3.983967] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13.4/3-13.4:1.0/0003:046D:C077.0003/input/input6
[ 3.984336] hid-generic 0003:046D:C077.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-13.4/input0
[ 4.077783] raid6: avx2x4 gen() 9257 MB/s
[ 4.097820] usb 3-13.3.3: new full-speed USB device number 7 using xhci_hcd
[ 4.145750] raid6: avx2x4 xor() 4491 MB/s
[ 4.213784] raid6: avx2x2 gen() 8344 MB/s
[ 4.246907] usb 3-13.3.3: New USB device found, idVendor=1a44, idProduct=0001, bcdDevice= 1.02
[ 4.247010] usb 3-13.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.247106] usb 3-13.3.3: Product: DP905v2.0
[ 4.247178] usb 3-13.3.3: Manufacturer: VASCO
[ 4.281750] raid6: avx2x2 xor() 5978 MB/s
[ 4.349777] raid6: avx2x1 gen() 7714 MB/s
[ 4.349817] usb 3-13.3.4: new high-speed USB device number 8 using xhci_hcd
[ 4.417778] raid6: avx2x1 xor() 4373 MB/s
[ 4.485778] raid6: sse2x4 gen() 4294 MB/s
[ 4.501387] usb 3-13.3.4: New USB device found, idVendor=0c45, idProduct=6366, bcdDevice= 1.00
[ 4.505888] usb 3-13.3.4: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 4.505984] usb 3-13.3.4: Product: USB 2.0 Camera
[ 4.506058] usb 3-13.3.4: Manufacturer: Sonix Technology Co., Ltd.
[ 4.506135] usb 3-13.3.4: SerialNumber: SN0001
[ 4.553780] raid6: sse2x4 xor() 4049 MB/s
[ 4.621780] raid6: sse2x2 gen() 4632 MB/s
[ 4.630309] scsi 6:0:0:0: Direct-Access SanDisk U3 Titanium 7.01 PQ: 0 ANSI: 0 CCS
[ 4.630914] sd 6:0:0:0: Attached scsi generic sg6 type 0
[ 4.631180] sd 6:0:0:0: [sdg] 7905279 512-byte logical blocks: (4.05 GB/3.77 GiB)
[ 4.631475] sd 6:0:0:0: [sdg] Write Protect is off
[ 4.631544] sd 6:0:0:0: [sdg] Mode Sense: 45 00 00 08
[ 4.631710] sd 6:0:0:0: [sdg] No Caching mode page found
[ 4.631780] sd 6:0:0:0: [sdg] Assuming drive cache: write through
[ 4.689782] raid6: sse2x2 xor() 3499 MB/s
[ 4.757783] raid6: sse2x1 gen() 3773 MB/s
[ 4.825781] raid6: sse2x1 xor() 2594 MB/s
[ 4.825854] raid6: using algorithm avx2x4 gen() 9257 MB/s
[ 4.825928] raid6: .... xor() 4491 MB/s, rmw enabled
[ 4.826002] raid6: using avx2x2 recovery algorithm
[ 4.826907] xor: automatically using best checksumming function avx
[ 4.842181] Btrfs loaded, crc32c=crc32c-intel
[ 4.859391] sdg: sdg1 sdg2
[ 4.860529] sd 6:0:0:0: [sdg] Attached SCSI removable disk
[ 4.949858] BTRFS: device fsid 6df1a099-37c5-44c8-912c-ca76d0ed05ce devid 2 transid 1427658 /dev/sde scanned by btrfs (262)
[ 4.950143] BTRFS: device fsid 6df1a099-37c5-44c8-912c-ca76d0ed05ce devid 3 transid 1427658 /dev/sdb scanned by btrfs (262)
[ 4.950428] BTRFS: device fsid 6df1a099-37c5-44c8-912c-ca76d0ed05ce devid 4 transid 1427658 /dev/sdc scanned by btrfs (262)
[ 4.950654] BTRFS: device fsid 1aac59dd-c195-4b8a-91ff-2968493d968e devid 1 transid 3250754 /dev/sdd2 scanned by btrfs (262)
[ 4.950825] BTRFS: device fsid 1aac59dd-c195-4b8a-91ff-2968493d968e devid 2 transid 3250754 /dev/sda scanned by btrfs (262)
[ 4.969125] BTRFS info (device sdd2): disk space caching is enabled
[ 4.969180] BTRFS info (device sdd2): has skinny extents
[ 5.015849] BTRFS info (device sdd2): enabling ssd optimizations
[ 5.163307] systemd[1]: Inserted module 'autofs4'
[ 5.172418] systemd[1]: systemd 246.6-1ubuntu1.4 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 5.189880] systemd[1]: Detected architecture x86-64.
[ 5.216055] systemd[1]: Set hostname to <wakkie.org>.
[ 5.357873] systemd[1]: /lib/systemd/system/dbus.service:12: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[ 5.371282] systemd[1]: /lib/systemd/system/plymouth-start.service:17: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[ 5.388470] systemd[1]: /lib/systemd/system/smartmontools.service:10: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 5.388853] systemd[1]: /lib/systemd/system/scanbd.service:30: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 5.388928] systemd[1]: /lib/systemd/system/scanbd.service:31: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 5.390948] systemd[1]: /lib/systemd/system/ntopng.service:8: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 5.393142] systemd[1]: /lib/systemd/system/clamav-freshclam.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 5.393314] systemd[1]: /lib/systemd/system/clamav-daemon.service:12: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 5.397165] systemd[1]: Queued start job for default target Graphical Interface.
[ 5.397907] systemd[1]: Created slice Virtual Machine and Container Slice.
[ 5.398302] systemd[1]: Created slice system-modprobe.slice.
[ 5.398583] systemd[1]: Created slice system-postgresql.slice.
[ 5.398884] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 5.399152] systemd[1]: Created slice system-tor.slice.
[ 5.399409] systemd[1]: Created slice User and Session Slice.
[ 5.399600] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.399878] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.400074] systemd[1]: Reached target Remote File Systems.
[ 5.400227] systemd[1]: Reached target Slices.
[ 5.400378] systemd[1]: Reached target Swap.
[ 5.400531] systemd[1]: Reached target Libvirt guests shutdown.
[ 5.400728] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 5.400937] systemd[1]: Listening on LVM2 poll daemon socket.
[ 5.401321] systemd[1]: Listening on Syslog Socket.
[ 5.401516] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 5.401700] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 5.401968] systemd[1]: Listening on Journal Audit Socket.
[ 5.402164] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.402371] systemd[1]: Listening on Journal Socket.
[ 5.402605] systemd[1]: Listening on udev Control Socket.
[ 5.402795] systemd[1]: Listening on udev Kernel Socket.
[ 5.403461] systemd[1]: Mounting Huge Pages File System...
[ 5.404144] systemd[1]: Mounting POSIX Message Queue File System...
[ 5.405025] systemd[1]: Mounting Kernel Debug File System...
[ 5.405882] systemd[1]: Mounting Kernel Trace File System...
[ 5.407241] systemd[1]: Starting Journal Service...
[ 5.407978] systemd[1]: Starting Availability of block devices...
[ 5.409036] systemd[1]: Starting Set the console keyboard layout...
[ 5.409769] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 5.410525] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 5.411540] systemd[1]: Starting Load Kernel Module drm...
[ 5.412971] systemd[1]: Starting Set Up Additional Binary Formats...
[ 5.415044] systemd[1]: Starting Load Kernel Modules...
[ 5.416140] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 5.417243] systemd[1]: Starting Coldplug All udev Devices...
[ 5.418321] systemd[1]: Starting Uncomplicated firewall...
[ 5.420238] systemd[1]: Mounted Huge Pages File System.
[ 5.420543] systemd[1]: Mounted POSIX Message Queue File System.
[ 5.420806] systemd[1]: Mounted Kernel Debug File System.
[ 5.421070] systemd[1]: Mounted Kernel Trace File System.
[ 5.421670] systemd[1]: Finished Availability of block devices.
[ 5.422117] BTRFS info (device sdd2): use lzo compression, level 0
[ 5.422147] ashmem_linux: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.422170] BTRFS info (device sdd2): enabling auto defrag
[ 5.422237] ashmem_linux: module verification failed: signature and/or required key missing - tainting kernel
[ 5.422275] BTRFS info (device sdd2): disk space caching is enabled
[ 5.422404] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 5.426194] ashmem: initialized
[ 5.427537] systemd[1]: modprobe@drm.service: Succeeded.
[ 5.427798] systemd[1]: Finished Load Kernel Module drm.
[ 5.428241] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 5.428525] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 366 (systemd-binfmt)
[ 5.429825] systemd[1]: Mounting Arbitrary Executable File Formats File System...
[ 5.430307] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 5.430426] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 5.431284] systemd[1]: Starting Load/Save Random Seed...
[ 5.432435] systemd[1]: Starting Create System Users...
[ 5.435369] systemd[1]: Mounted Arbitrary Executable File Formats File System.
[ 5.436796] systemd[1]: Finished Set Up Additional Binary Formats.
[ 5.441021] lp: driver loaded but no devices found
[ 5.444926] ppdev: user-space parallel port driver
[ 5.448401] systemd[1]: Finished Load Kernel Modules.
[ 5.449625] systemd[1]: Mounting FUSE Control File System...
[ 5.450749] systemd[1]: Mounting Kernel Configuration File System...
[ 5.451793] systemd[1]: Starting Apply Kernel Variables...
[ 5.453553] systemd[1]: Finished Load/Save Random Seed.
[ 5.453823] systemd[1]: Mounted FUSE Control File System.
[ 5.454034] systemd[1]: Mounted Kernel Configuration File System.
[ 5.456486] systemd[1]: Finished Create System Users.
[ 5.457294] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 5.463024] systemd[1]: Finished Apply Kernel Variables.
[ 5.464202] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 5.465512] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[ 5.466006] systemd[1]: Finished Set the console keyboard layout.
[ 5.485302] systemd[1]: Started Journal Service.
[ 5.734992] mc: Linux media interface: v0.10
[ 5.736213] at24 0-0050: supply vcc not found, using dummy regulator
[ 5.737476] at24 0-0050: 256 byte spd EEPROM, read-only
[ 5.737504] at24 0-0051: supply vcc not found, using dummy regulator
[ 5.738037] at24 0-0051: 256 byte spd EEPROM, read-only
[ 5.738059] at24 0-0052: supply vcc not found, using dummy regulator
[ 5.738579] at24 0-0052: 256 byte spd EEPROM, read-only
[ 5.738593] at24 0-0053: supply vcc not found, using dummy regulator
[ 5.739107] at24 0-0053: 256 byte spd EEPROM, read-only
[ 5.739867] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 5.741582] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 5.749670] videodev: Linux video capture interface: v2.00
[ 5.752771] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 5.752772] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[ 5.778086] ata2.00: exception Emask 0x10 SAct 0x7e000000 SErr 0x680101 action 0x6 frozen
[ 5.778147] ata2.00: irq_stat 0x0c000000, interface fatal error
[ 5.778197] ata2: SError: { RecovData UnrecovData 10B8B BadCRC Handshk }
[ 5.778248] ata2.00: failed command: READ FPDMA QUEUED
[ 5.778300] ata2.00: cmd 60/d0:c8:00:84:e0/00:00:e8:00:00/40 tag 25 ncq dma 106496 in
res 40/00:f0:d8:85:e0/00:00:e8:00:00/40 Emask 0x10 (ATA bus error)
[ 5.778371] ata2.00: status: { DRDY }
[ 5.778421] ata2.00: failed command: READ FPDMA QUEUED
[ 5.778473] ata2.00: cmd 60/08:d0:d8:84:e0/00:00:e8:00:00/40 tag 26 ncq dma 4096 in
res 40/00:f0:d8:85:e0/00:00:e8:00:00/40 Emask 0x10 (ATA bus error)
[ 5.778543] ata2.00: status: { DRDY }
[ 5.778590] ata2.00: failed command: READ FPDMA QUEUED
[ 5.778641] ata2.00: cmd 60/10:d8:e8:84:e0/00:00:e8:00:00/40 tag 27 ncq dma 8192 in
res 40/00:f0:d8:85:e0/00:00:e8:00:00/40 Emask 0x10 (ATA bus error)
[ 5.778713] ata2.00: status: { DRDY }
[ 5.778760] ata2.00: failed command: READ FPDMA QUEUED
[ 5.778809] ata2.00: cmd 60/20:e0:00:85:e0/00:00:e8:00:00/40 tag 28 ncq dma 16384 in
res 40/00:f0:d8:85:e0/00:00:e8:00:00/40 Emask 0x10 (ATA bus error)
[ 5.778879] ata2.00: status: { DRDY }
[ 5.778925] ata2.00: failed command: READ FPDMA QUEUED
[ 5.778975] ata2.00: cmd 60/a8:e8:28:85:e0/00:00:e8:00:00/40 tag 29 ncq dma 86016 in
res 40/00:f0:d8:85:e0/00:00:e8:00:00/40 Emask 0x10 (ATA bus error)
[ 5.779047] ata2.00: status: { DRDY }
[ 5.779093] ata2.00: failed command: READ FPDMA QUEUED
[ 5.779142] ata2.00: cmd 60/28:f0:d8:85:e0/00:00:e8:00:00/40 tag 30 ncq dma 20480 in
res 40/00:f0:d8:85:e0/00:00:e8:00:00/40 Emask 0x10 (ATA bus error)
[ 5.779212] ata2.00: status: { DRDY }
[ 5.779263] ata2: hard resetting link
[ 5.811983] asus_wmi: ASUS WMI generic driver loaded
[ 5.829756] [drm] amdgpu kernel modesetting enabled.
[ 5.829820] CRAT table not found
[ 5.829823] Virtual CRAT table created for CPU
[ 5.829834] amdgpu: Topology: Add CPU node
[ 5.829887] amdgpu 0000:01:00.0: vgaarb: deactivate vga console
[ 5.832949] Console: switching to colour dummy device 80x25
[ 5.833107] [drm] initializing kernel modesetting (POLARIS11 0x1002:0x67EF 0x174B:0xE348 0xCF).
[ 5.833109] amdgpu 0000:01:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported
[ 5.833119] [drm] register mmio base: 0xDFE00000
[ 5.833120] [drm] register mmio size: 262144
[ 5.833127] [drm] add ip block number 0 <vi_common>
[ 5.833127] [drm] add ip block number 1 <gmc_v8_0>
[ 5.833128] [drm] add ip block number 2 <tonga_ih>
[ 5.833129] [drm] add ip block number 3 <gfx_v8_0>
[ 5.833130] [drm] add ip block number 4 <sdma_v3_0>
[ 5.833130] [drm] add ip block number 5 <powerplay>
[ 5.833131] [drm] add ip block number 6 <dm>
[ 5.833132] [drm] add ip block number 7 <uvd_v6_0>
[ 5.833132] [drm] add ip block number 8 <vce_v3_0>
[ 5.833376] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window]
[ 5.833379] caller pci_map_rom+0x70/0x130 mapping multiple BARs
[ 5.833380] amdgpu 0000:01:00.0: No more image in the PCI ROM
[ 5.833397] amdgpu: ATOM BIOS: 113-348001-S4G
[ 5.833409] [drm] UVD is enabled in VM mode
[ 5.833409] [drm] UVD ENC is enabled in VM mode
[ 5.833411] [drm] VCE enabled in VM mode
[ 5.833434] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
[ 5.835465] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
[ 5.835466] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 5.835467] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 5.835467] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 5.838928] cryptd: max_cpu_qlen set to 1000
[ 5.850298] amdgpu 0000:01:00.0: amdgpu: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used)
[ 5.850299] amdgpu 0000:01:00.0: amdgpu: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF
[ 5.850308] [drm] Detected VRAM RAM=2048M, BAR=256M
[ 5.850308] [drm] RAM width 128bits GDDR5
[ 5.850389] [TTM] Zone kernel: Available graphics memory: 8167104 KiB
[ 5.850390] [TTM] Zone dma32: Available graphics memory: 2097152 KiB
[ 5.850391] [TTM] Initializing pool allocator
[ 5.850403] [TTM] Initializing DMA pool allocator
[ 5.850436] [drm] amdgpu: 2048M of VRAM memory ready
[ 5.850439] [drm] amdgpu: 3072M of GTT memory ready.
[ 5.850440] [drm] GART: num cpu pages 65536, num gpu pages 65536
[ 5.850943] [drm] PCIE GART of 256M enabled (table at 0x000000F400900000).
[ 5.852127] [drm] Chained IB support enabled!
[ 5.856024] amdgpu: hwmgr_sw_init smu backed is polaris10_smu
[ 5.857120] [drm] Found UVD firmware Version: 1.130 Family ID: 16
[ 5.858764] [drm] Found VCE firmware Version: 53.26 Binary ID: 3
[ 5.863456] usb 3-13.3.4: 3:1: cannot get freq at ep 0x84
[ 5.870498] AVX2 version of gcm_enc/dec engaged.
[ 5.870499] AES CTR mode by8 optimization enabled
[ 5.874055] asus_wmi: Initialization: 0x0
[ 5.874093] asus_wmi: BIOS WMI version: 0.9
[ 5.874166] asus_wmi: SFUN value: 0x0
[ 5.874168] eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS
[ 5.874965] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input7
[ 5.886473] snd_hda_intel 0000:01:00.1: Force to non-snoop mode
[ 5.903109] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input8
[ 5.903156] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input9
[ 5.903202] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input10
[ 5.903240] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input11
[ 5.903278] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input12
[ 5.915324] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[ 5.915326] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 5.915327] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 5.915328] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 5.915329] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e
[ 5.915330] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 5.915331] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 5.915333] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 5.915333] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 5.932398] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 5.932470] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 5.932527] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 5.932601] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 5.932640] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 5.932676] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 5.932712] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[ 5.932844] [drm] dce110_link_encoder_construct: Failed to get encoder_cap_info from VBIOS with error code 4!
[ 5.932864] [drm] dce110_link_encoder_construct: Failed to get encoder_cap_info from VBIOS with error code 4!
[ 5.932877] [drm] Display Core initialized with v3.2.84!
[ 5.933846] snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[ 5.947355] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 5.984118] [drm] UVD and UVD ENC initialized successfully.
[ 5.996327] usbcore: registered new interface driver snd-usb-audio
[ 5.996917] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:6366)
[ 6.020605] ath: EEPROM regdomain: 0x30
[ 6.020606] ath: EEPROM indicates we should expect a direct regpair map
[ 6.020607] ath: Country alpha2 being used: AM
[ 6.020607] ath: Regpair used: 0x30
[ 6.022786] input: USB 2.0 Camera: USB Camera as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13.3/3-13.3.4/3-13.3.4:1.0/input/input20
[ 6.022900] usbcore: registered new interface driver uvcvideo
[ 6.022900] USB Video Class driver (1.1.1)
[ 6.023889] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 6.024228] ieee80211 phy0: Atheros AR5418 MAC/BB Rev:2 AR2133 RF Rev:81 mem=0xffffb6cb40890000, irq=18
[ 6.092042] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 6.094071] [drm] VCE initialized successfully.
[ 6.096912] kfd kfd: Allocated 3969056 bytes on gart
[ 6.098338] Virtual CRAT table created for GPU
[ 6.098373] amdgpu: Topology: Add dGPU node [0x67ef:0x1002]
[ 6.098374] kfd kfd: added device 1002:67ef
[ 6.098376] amdgpu 0000:01:00.0: amdgpu: SE 2, SH per SE 1, CU per SH 8, active_cu_number 14
[ 6.099740] [drm] fb mappable at 0xC0E30000
[ 6.099741] [drm] vram apper at 0xC0000000
[ 6.099741] [drm] size 7299072
[ 6.099741] [drm] fb depth is 24
[ 6.099742] [drm] pitch is 6912
[ 6.099798] fbcon: amdgpudrmfb (fb0) is primary device
[ 6.148424] Console: switching to colour frame buffer device 210x65
[ 6.167136] amdgpu 0000:01:00.0: fb0: amdgpudrmfb frame buffer device
[ 6.180097] ath9k 0000:05:00.0 wlp5s0: renamed from wlan0
[ 6.187283] [drm] Initialized amdgpu 3.38.0 20150101 for 0000:01:00.0 on minor 0
[ 6.192473] intel_rapl_common: Found RAPL domain package
[ 6.192474] intel_rapl_common: Found RAPL domain core
[ 6.192475] intel_rapl_common: Found RAPL domain dram
[ 6.197017] ata2.00: configured for UDMA/133
[ 6.197033] sd 1:0:0:0: [sdb] tag#25 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=0s
[ 6.197035] sd 1:0:0:0: [sdb] tag#25 Sense Key : Illegal Request [current]
[ 6.197037] sd 1:0:0:0: [sdb] tag#25 Add. Sense: Unaligned write command
[ 6.197039] sd 1:0:0:0: [sdb] tag#25 CDB: Read(10) 28 00 e8 e0 84 00 00 00 d0 00
[ 6.197041] blk_update_request: I/O error, dev sdb, sector 3907027968 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
[ 6.197056] sd 1:0:0:0: [sdb] tag#26 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=0s
[ 6.197057] sd 1:0:0:0: [sdb] tag#26 Sense Key : Illegal Request [current]
[ 6.197059] sd 1:0:0:0: [sdb] tag#26 Add. Sense: Unaligned write command
[ 6.197060] sd 1:0:0:0: [sdb] tag#26 CDB: Read(10) 28 00 e8 e0 84 d8 00 00 08 00
[ 6.197061] blk_update_request: I/O error, dev sdb, sector 3907028184 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ 6.197065] sd 1:0:0:0: [sdb] tag#27 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=0s
[ 6.197066] sd 1:0:0:0: [sdb] tag#27 Sense Key : Illegal Request [current]
[ 6.197068] sd 1:0:0:0: [sdb] tag#27 Add. Sense: Unaligned write command
[ 6.197069] sd 1:0:0:0: [sdb] tag#27 CDB: Read(10) 28 00 e8 e0 84 e8 00 00 10 00
[ 6.197070] blk_update_request: I/O error, dev sdb, sector 3907028200 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ 6.197073] sd 1:0:0:0: [sdb] tag#28 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=0s
[ 6.197074] sd 1:0:0:0: [sdb] tag#28 Sense Key : Illegal Request [current]
[ 6.197075] sd 1:0:0:0: [sdb] tag#28 Add. Sense: Unaligned write command
[ 6.197076] sd 1:0:0:0: [sdb] tag#28 CDB: Read(10) 28 00 e8 e0 85 00 00 00 20 00
[ 6.197077] blk_update_request: I/O error, dev sdb, sector 3907028224 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ 6.197081] sd 1:0:0:0: [sdb] tag#29 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=0s
[ 6.197082] sd 1:0:0:0: [sdb] tag#29 Sense Key : Illegal Request [current]
[ 6.197083] sd 1:0:0:0: [sdb] tag#29 Add. Sense: Unaligned write command
[ 6.197084] sd 1:0:0:0: [sdb] tag#29 CDB: Read(10) 28 00 e8 e0 85 28 00 00 a8 00
[ 6.197085] blk_update_request: I/O error, dev sdb, sector 3907028264 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
[ 6.197089] sd 1:0:0:0: [sdb] tag#30 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=0s
[ 6.197090] sd 1:0:0:0: [sdb] tag#30 Sense Key : Illegal Request [current]
[ 6.197091] sd 1:0:0:0: [sdb] tag#30 Add. Sense: Unaligned write command
[ 6.197092] sd 1:0:0:0: [sdb] tag#30 CDB: Read(10) 28 00 e8 e0 85 d8 00 00 28 00
[ 6.197093] blk_update_request: I/O error, dev sdb, sector 3907028440 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ 6.197095] ata2: EH complete
[ 8.174772] BTRFS info (device sde): using free space tree
[ 8.174773] BTRFS info (device sde): has skinny extents
[ 8.175417] BTRFS error (device sde): parent transid verify failed on 5028524228608 wanted 1427600 found 1429491
[ 8.175729] BTRFS error (device sde): bad tree block start, want 5028524228608 have 0
[ 8.175771] BTRFS error (device sde): failed to read chunk root
[ 8.189798] BTRFS error (device sde): open_ctree failed
[ 8.190617] BTRFS info (device sde): use lzo compression, level 0
[ 8.190619] BTRFS info (device sde): enabling auto defrag
[ 8.190621] BTRFS info (device sde): using free space tree
[ 8.190622] BTRFS info (device sde): has skinny extents
[ 8.191963] BTRFS error (device sde): bad tree block start, want 5028524228608 have 0
[ 8.192189] BTRFS error (device sde): parent transid verify failed on 5028524228608 wanted 1427600 found 1429491
[ 8.193373] BTRFS error (device sde): failed to read chunk root
[ 8.242134] audit: type=1400 audit(1626353337.494:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=1501 comm="apparmor_parser"
[ 8.242136] audit: type=1400 audit(1626353337.494:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=1504 comm="apparmor_parser"
[ 8.244996] audit: type=1400 audit(1626353337.498:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1497 comm="apparmor_parser"
[ 8.245513] audit: type=1400 audit(1626353337.498:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=1508 comm="apparmor_parser"
[ 8.248931] audit: type=1400 audit(1626353337.502:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1503 comm="apparmor_parser"
[ 8.248933] audit: type=1400 audit(1626353337.502:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1503 comm="apparmor_parser"
[ 8.248935] audit: type=1400 audit(1626353337.502:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1503 comm="apparmor_parser"
[ 8.248936] audit: type=1400 audit(1626353337.502:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=1503 comm="apparmor_parser"
[ 8.249986] audit: type=1400 audit(1626353337.506:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1509 comm="apparmor_parser"
[ 8.250047] audit: type=1400 audit(1626353337.506:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default" pid=1500 comm="apparmor_parser"
[ 8.346957] BTRFS error (device sde): open_ctree failed
[ 9.886132] EXT4-fs (sdd1): mounting ext3 file system using the ext4 subsystem
[ 9.890951] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
[ 9.890955] ext3 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff)
[ 21.737898] BTRFS info (device sde): using free space tree
[ 21.737899] BTRFS info (device sde): has skinny extents
[ 21.738424] BTRFS error (device sde): parent transid verify failed on 5028524228608 wanted 1427600 found 1429491
[ 21.739246] BTRFS error (device sde): bad tree block start, want 5028524228608 have 0
[ 21.739849] BTRFS error (device sde): failed to read chunk root
[ 21.753804] BTRFS error (device sde): open_ctree failed
[ 21.756980] BTRFS info (device sde): use lzo compression, level 0
[ 21.756986] BTRFS info (device sde): enabling auto defrag
[ 21.756993] BTRFS info (device sde): using free space tree
[ 21.756995] BTRFS info (device sde): has skinny extents
[ 21.758238] BTRFS error (device sde): bad tree block start, want 5028524228608 have 0
[ 21.759745] BTRFS error (device sde): parent transid verify failed on 5028524228608 wanted 1427600 found 1429491
[ 21.760571] BTRFS error (device sde): failed to read chunk root
[ 21.802016] BTRFS error (device sde): open_ctree failed
[ 2659.184514] BTRFS info (device sde): using free space tree
[ 2659.184515] BTRFS info (device sde): has skinny extents
[ 2659.185101] BTRFS error (device sde): parent transid verify failed on 5028524228608 wanted 1427600 found 1429491
[ 2659.186018] BTRFS error (device sde): bad tree block start, want 5028524228608 have 0
[ 2659.186702] BTRFS error (device sde): failed to read chunk root
[ 2659.214477] BTRFS error (device sde): open_ctree failed
[ 2659.218532] BTRFS info (device sde): use lzo compression, level 0
[ 2659.218538] BTRFS info (device sde): enabling auto defrag
[ 2659.218544] BTRFS info (device sde): using free space tree
[ 2659.218546] BTRFS info (device sde): has skinny extents
[ 2659.220190] BTRFS error (device sde): bad tree block start, want 5028524228608 have 0
[ 2659.221792] BTRFS error (device sde): parent transid verify failed on 5028524228608 wanted 1427600 found 1429491
[ 2659.222669] BTRFS error (device sde): failed to read chunk root
[ 2659.246613] BTRFS error (device sde): open_ctree failed
[ 8151.218496] BTRFS info (device sde): using free space tree
[ 8151.218497] BTRFS info (device sde): has skinny extents
[ 8151.219390] BTRFS error (device sde): bad tree block start, want 5028524228608 have 0
[ 8151.222434] BTRFS error (device sde): parent transid verify failed on 5028524228608 wanted 1427600 found 1429491
[ 8151.223284] BTRFS error (device sde): failed to read chunk root
[ 8151.243887] BTRFS error (device sde): open_ctree failed
[ 8850.119703] usb 3-14: USB disconnect, device number 4
[ 8860.427844] usb 3-14: new high-speed USB device number 9 using xhci_hcd
[ 8860.581549] usb 3-14: New USB device found, idVendor=6557, idProduct=4200, bcdDevice= 1.00
[ 8860.581554] usb 3-14: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 8860.581557] usb 3-14: Product: USB DISK 2.0
[ 8860.581559] usb 3-14: Manufacturer:
[ 8860.581561] usb 3-14: SerialNumber: 070B68AC27C0C155
[ 8860.583017] usb-storage 3-14:1.0: USB Mass Storage device detected
[ 8860.583358] scsi host6: usb-storage 3-14:1.0
[ 8861.594027] scsi 6:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 6
[ 8861.594584] sd 6:0:0:0: Attached scsi generic sg6 type 0
[ 8862.579710] sd 6:0:0:0: [sdg] 30291264 512-byte logical blocks: (15.5 GB/14.4 GiB)
[ 8862.579871] sd 6:0:0:0: [sdg] Write Protect is off
[ 8862.579872] sd 6:0:0:0: [sdg] Mode Sense: 23 00 00 00
[ 8862.580029] sd 6:0:0:0: [sdg] No Caching mode page found
[ 8862.581087] sd 6:0:0:0: [sdg] Assuming drive cache: write through
[ 8862.611720] sdg: sdg1 sdg2
[ 8862.613947] sd 6:0:0:0: [sdg] Attached SCSI removable disk
[ 8906.400526] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 8906.401937] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 8906.405978] ISO 9660 Extensions: RRIP_1991A
[ 9089.662758] sdg: sdg1 sdg2
[ 9126.740666] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 9126.742189] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 9126.743135] ISO 9660 Extensions: RRIP_1991A
[ 9323.403003] FAT-fs (sdg): invalid media value (0x90)
[ 9323.403906] FAT-fs (sdg): Can't find a valid FAT filesystem
[ 9380.177535] usb 3-14: USB disconnect, device number 9
[ 9393.023963] usb 3-14: new high-speed USB device number 10 using xhci_hcd
[ 9393.177552] usb 3-14: New USB device found, idVendor=6557, idProduct=4200, bcdDevice= 1.00
[ 9393.177557] usb 3-14: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 9393.177561] usb 3-14: Product: USB DISK 2.0
[ 9393.177563] usb 3-14: Manufacturer:
[ 9393.177566] usb 3-14: SerialNumber: 070B68AC27C0C155
[ 9393.179011] usb-storage 3-14:1.0: USB Mass Storage device detected
[ 9393.179479] scsi host6: usb-storage 3-14:1.0
[ 9394.201965] scsi 6:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 6
[ 9394.202482] sd 6:0:0:0: Attached scsi generic sg6 type 0
[ 9395.256329] sd 6:0:0:0: [sdg] 30291264 512-byte logical blocks: (15.5 GB/14.4 GiB)
[ 9395.256518] sd 6:0:0:0: [sdg] Write Protect is off
[ 9395.256519] sd 6:0:0:0: [sdg] Mode Sense: 23 00 00 00
[ 9395.256739] sd 6:0:0:0: [sdg] No Caching mode page found
[ 9395.257918] sd 6:0:0:0: [sdg] Assuming drive cache: write through
[ 9395.276308] sdg: sdg1 sdg2
[ 9395.278587] sd 6:0:0:0: [sdg] Attached SCSI removable disk
[ 9413.740129] FAT-fs (sdg): invalid media value (0x90)
[ 9413.740973] FAT-fs (sdg): Can't find a valid FAT filesystem
[10206.237723] BTRFS error (device sde): unrecognized mount option 'rootflags=recovery'
[10206.237778] BTRFS error (device sde): open_ctree failed
[10284.498758] BTRFS warning (device sde): 'recovery' is deprecated, use 'usebackuproot' instead
[10284.498761] BTRFS info (device sde): trying to use backup root at mount time
[10284.498766] BTRFS info (device sde): disabling free space tree
[10284.498768] BTRFS error (device sde): cannot disable free space tree
[10284.498896] BTRFS error (device sde): open_ctree failed
[70091.856479] usb 3-14: USB disconnect, device number 10
[70893.320368] usb 3-13.4: USB disconnect, device number 6
[70897.729981] usb 3-13.3: USB disconnect, device number 5
[70897.729986] usb 3-13.3.3: USB disconnect, device number 7
[70897.730804] usb 3-13.3.4: USB disconnect, device number 8
[70899.041931] usb 3-13.4: new high-speed USB device number 11 using xhci_hcd
[70899.144027] usb 3-13.4: New USB device found, idVendor=2109, idProduct=2811, bcdDevice=90.70
[70899.144032] usb 3-13.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[70899.144036] usb 3-13.4: Product: USB2.0 Hub
[70899.144039] usb 3-13.4: Manufacturer: VIA Labs, Inc.
[70899.145017] hub 3-13.4:1.0: USB hub found
[70899.145388] hub 3-13.4:1.0: 4 ports detected
[70899.449930] usb 3-13.4.3: new full-speed USB device number 12 using xhci_hcd
[70899.590939] usb 3-13.4.3: New USB device found, idVendor=1a44, idProduct=0001, bcdDevice= 1.02
[70899.590945] usb 3-13.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[70899.590947] usb 3-13.4.3: Product: DP905v2.0
[70899.590950] usb 3-13.4.3: Manufacturer: VASCO
[70901.000881] usb 3-13.4.3: USB disconnect, device number 12
[70905.269925] usb 3-13.4.3: new full-speed USB device number 13 using xhci_hcd
[70905.410945] usb 3-13.4.3: New USB device found, idVendor=1a44, idProduct=0001, bcdDevice= 1.02
[70905.410950] usb 3-13.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[70905.410953] usb 3-13.4.3: Product: DP905v2.0
[70905.410956] usb 3-13.4.3: Manufacturer: VASCO
[70905.509933] usb 3-13.4.4: new high-speed USB device number 14 using xhci_hcd
[70905.653308] usb 3-13.4.4: New USB device found, idVendor=0c45, idProduct=6366, bcdDevice= 1.00
[70905.653313] usb 3-13.4.4: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[70905.653317] usb 3-13.4.4: Product: USB 2.0 Camera
[70905.653319] usb 3-13.4.4: Manufacturer: Sonix Technology Co., Ltd.
[70905.653322] usb 3-13.4.4: SerialNumber: SN0001
[70905.655656] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:6366)
[70905.682102] input: USB 2.0 Camera: USB Camera as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13.4/3-13.4.4/3-13.4.4:1.0/input/input21
[70905.724933] usb 3-13.4.4: 3:1: cannot get freq at ep 0x84
[70912.041932] usb 3-13.4.2: new high-speed USB device number 15 using xhci_hcd
[70912.159522] usb 3-13.4.2: New USB device found, idVendor=6557, idProduct=4200, bcdDevice= 1.00
[70912.159527] usb 3-13.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[70912.159531] usb 3-13.4.2: Product: USB DISK 2.0
[70912.159533] usb 3-13.4.2: Manufacturer:
[70912.159536] usb 3-13.4.2: SerialNumber: 070B68AC27C0C155
[70912.160899] usb-storage 3-13.4.2:1.0: USB Mass Storage device detected
[70912.161275] scsi host7: usb-storage 3-13.4.2:1.0
[70913.192020] scsi 7:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 6
[70913.192622] sd 7:0:0:0: Attached scsi generic sg6 type 0
[70914.359603] sd 7:0:0:0: [sdh] 30291264 512-byte logical blocks: (15.5 GB/14.4 GiB)
[70914.359760] sd 7:0:0:0: [sdh] Write Protect is off
[70914.359761] sd 7:0:0:0: [sdh] Mode Sense: 23 00 00 00
[70914.359905] sd 7:0:0:0: [sdh] No Caching mode page found
[70914.360945] sd 7:0:0:0: [sdh] Assuming drive cache: write through
[70914.395716] sdh: sdh1
[70914.397650] sd 7:0:0:0: [sdh] Attached SCSI removable disk
[70945.311515] FAT-fs (sdh): invalid media value (0x90)
[70945.311580] FAT-fs (sdh): Can't find a valid FAT filesystem
[-- Attachment #6: btrfs_scrub_status_home --]
[-- Type: application/octet-stream, Size: 241 bytes --]
UUID: 1aac59dd-c195-4b8a-91ff-2968493d968e
Scrub started: Thu Jul 15 14:41:39 2021
Status: finished
Duration: 0:02:43
Total to scrub: 166.18GiB
Rate: 1.02GiB/s
Error summary: no errors found
[-- Attachment #7: history --]
[-- Type: application/octet-stream, Size: 5259 bytes --]
396 systemctl status btrfsmaintenance-refresh.service
397 btrfs filesystem show
398 btrfs filesystem label
400 btrfs filesystem usage /
402 btrfs filesystem usage /data
405 btrfs filesystem df /
406 btrfs filesystem df /data
407 btrfs fi show
408 apt update
409 apt upgrade
410 btrfs fi show
411 btrfs fi show /dev/sde
412 btrfs scrub /dev/sde
413 btrfs scrub status /dev/sde
414 btrfs scrub status /data
415 btrfs scrub status /home
416 btrfs scrub status /
417 btrfs scrub start /data
418 btrfs scrub start /
419 btrfs scrub status /data
420 btrfs scrub status /
421 btrfs scrub status /data
422 btrfs filesystem defragment /data
423 lsblk -e7
424 mount
425 cat /etc/fstab
426 smartctl /dev/sde
428 smartctl -a /dev/sde | less
429 smartctl -a /dev/sdb
432 cd /home/
433 ls
434 cd ..
435 reboot
436 cd /data/
437 ls
438 cd ..
439 lsblk -e7
440 btrfs check /dev/sde
441 btrfs check -s /dev/sde
442 btrfs check -s 0 /dev/sde
443 cd /
444 ls
445 vim /etc/fstab
446 cat /sys/block/sde/device/queue_depth
447 dmesg
448 dmesg | less
449 ls -l /dev/disk/by-path/
450 hdparm -i /dev/sdb
451 dmesg | less
452 apt search inter-microcode
453 apt search intel-microcode
454 ls
455 cd /mnt/
456 ls
457 cd btrfs/
458 ls
459 cd ..
460 mount -t btrfs -o ro,recovery,nospace_cache /dev/sde /mnt/btrfs/
461 mount -t btrfs -o ro,recovery,nospace_cache /home
462 btrfs check /home
463 btrfs check /dev/sde
464 mpunt -t btrfs -o usebackuproot /dev/sde /mnt/btrfs
465 mount -t btrfs -o usebackuproot /dev/sde /mnt/btrfs
466 btrfs rescue zero-log /dev/sde
467 btrfs rescue zero-log /dev/sdb
468 btrfs rescue super-recover -v /dev/sde
469 btrfs rescue super-recover -v /dev/sdb
470 apt install linux-image-5.8.0-59-generic
472 apt install linux-image-5.8.0-55-generic
473 apt install linux-image-5.8.0-53-generic
474 reboot
475 ifconfig -f
476 ifconfig
477 history
478 systemctl status sshd
479 systemctl restart networkd-dispatcher.service
480 dhclient eno1
481 btrfs check /dev/sde
482 btrfs scrub /
483 btrfs scrub start /
484 btrfs fi df /home
485 btrfs fi df /
486 btrfs fi df /data
487 dmesg > dmesg.log
488 view dmesg.log
489 uname -a
490 btrfs --version
491 btrfs fi show
492 mail
493 journalctl
494 btrfs scrub start /data
495 journalctl -f
496 btrfs scrub start /home
497 journalctl -f
498 reboot
499 systemctl default
500 ls
501 cat btrfs-undelete
502 ls
503 smartctl -a /dev/sde
504 smartctl -a /dev/sdb
505 smartctl -a /dev/sdc
506 smartctl --help
507 smartctl -t short /dev/sdc
508 smartctl -a /dev/sdc
509 smartctl -a /dev/sdc | less
510 smartctl -t short /dev/sde
511 smartctl -a /dev/sde | less
512 smartctl -t conveyance /dev/sde
513 smartctl -t offline /dev/sde
514 smartctl --help
515 smartctl --help | less
516 smartctl -H /dev/sde
517 smartctl --attributes log=selftest --quietmode=errorsonly /dev/sde
518 btrfs check --repair /dev/sde
519 mount
520 mount | grep sde
521 /de
522 mount /dev/sde /mnt/btrfs
523 btrfs scrub status /data
524 btrfs scrub status /home
525 btrfs scrub status /
526 mount
527 mount |" grep /dev/sd
528 mount | grep /dev/sd
529 fdisk -l | less
530 cd /mnt/
531 ls
532 mkdir usb
533 mount /dev/sdg /mnt/usb
534 cd /mnt/usb/\
535 ls
536 cd ..
537 umount /mnt/usb
538 df
539 mkfs.vfat /dev/sdg
540 fdisk -l
541 mkfs.vfat /dev/sdg2
542 mount /dev/sdg /mnt/usb
543 umount /mnt/usb
544 fsck /dev/sdg
545 fsck /dev/sdg2
546 mkfs.vfat /dev/sdg1
547 fsck /dev/sdg1
548*
549 mount -t vfat /dev/sdg /mnt/usb
550 mountfat /dev/sdg /mnt/usb
551 mount -t fat32 /dev/sdg /mnt/usb
552 mount -t fat /dev/sdg /mnt/usb
553 df -h
554 mount -t fat /dev/sdg /mnt/usb
555 mount -t vfat /dev/sdg /mnt/usb
556 mount -t vfat /dev/sdg1 /mnt/usb
557 cd /mnt/usb
558 ls
559 touch 20210715_btrfs_rescue
560 ls
561 uname -a > uname
562 btrfs --version > btrfs_version
563 btrfs fi show > btrfs_fi_show
564 btrfs fi df /home > btrfs_fi_df_home
565 dmesg > dmesg.log
566 ls
567 btrfs scrub status /home > btrfs_scrub_status_home
568 btrfs scrub status /home
569 mount -t btrfs -o rootflags=recovery,nospace_cache /dev/sde /mnt/btrfs
570 mount -t btrfs -o recovery,nospace_cache /dev/sde /mnt/btrfs
571 history
572 history > history
573 ls
574 btrfs scrub status /home
575 cd ..
576 fdisk -l
577 fdisk -l | less
578 mount -t vfat /dev/sdh /mnt/usb
579 mount /dev/sdh /mnt/usb
580 history
581 mount /dev/sdh1 /mnt/usb
582 cd usb/
583 uname -a > uname
584 btrfs --version > btrfs_version
585 btrfs fi show > btrfs_fi_show
586 btrfs fi df /home > btrfs_fi_df_home
587 dmesg > dmesg.log
588 btrfs scrub status /home > btrfs_scrub_status_home
589 history > history
590 ls
591 cd ..
592 umount /mnt/usb
593 mount /dev/sdh1 /mnt/usb
594 cd usb/
595 ls
596 history > history
[-- Attachment #8: fstab --]
[-- Type: application/octet-stream, Size: 428 bytes --]
UUID=d8c50d6d-150a-4bc3-a31b-c4c41c8e57b6 /boot ext3 defaults 1 2
UUID=1aac59dd-c195-4b8a-91ff-2968493d968e / btrfs defaults,compress=lzo,ssd,autodefrag,subvol=@ 0 0
UUID=6df1a099-37c5-44c8-912c-ca76d0ed05ce /home btrfs defaults,compress=lzo,autodefrag,noatime,subvol=volume/home 0 0
UUID=6df1a099-37c5-44c8-912c-ca76d0ed05ce /data btrfs defaults,noatime,subvol=volume/data 0 0
[-- Attachment #9: syslog --]
[-- Type: application/octet-stream, Size: 2640 bytes --]
Took a lot of lines out but kept more or less the unique ones
Jul 7 01:42:54 kernel: [17147.661201] BTRFS error (device sde): bdev /dev/sdb errs: wr 387783, rd 147497, flush 8151, corrupt 0, gen 0
Jul 7 01:42:58 kernel: [17151.213275] BTRFS info (device sde): read error corrected: ino 0 off 4145888116736 (dev /dev/sde sector 115436832)
Jul 7 01:42:59 kernel: [17152.251182] BTRFS warning (device sde): lost page write due to IO error on /dev/sdb (-5)
Jul 7 01:42:59 kernel: [17152.284258] BTRFS error (device sde): error writing primary super block to device 3
Jul 7 01:43:32 kernel: [17185.587803] BTRFS error (device sde): bdev /dev/sdb errs: wr 392352, rd 151316, flush 8152, corrupt 0, gen 0
Jul 7 01:43:34 kernel: [17186.725092] BTRFS warning (device sde): lost page write due to IO error on /dev/sdb (-5)
Jul 7 01:43:34 kernel: [17186.755892] BTRFS error (device sde): error writing primary super block to device 3
Jul 7 07:35:47 kernel: [38320.556658] BTRFS error (device sde): bdev /dev/sdb errs: wr 392907, rd 151567, flush 8153, corrupt 0, gen 0
Jul 8 00:00:30 kernel: [97402.925086] BTRFS warning (device sde): lost page write due to IO error on /dev/sdb (-5)
Jul 8 00:00:30 kernel: [97402.925087] BTRFS error (device sde): bdev /dev/sdb errs: wr 866803, rd 509294, flush 13582, corrupt 0, gen 0
Jul 8 00:00:30 kernel: [97402.936809] BTRFS error (device sde): error writing primary super block to device 3
Jul 8 00:00:30 kernel: [97403.482117] BTRFS error (device sde): bdev /dev/sdb errs: wr 866805, rd 509297, flush 13582, corrupt 0, gen 0
Jul 8 00:00:30 kernel: [97403.515955] BTRFS warning (device sde): lost page write due to IO error on /dev/sdb (-5)
Jul 8 00:00:30 kernel: [97403.546083] BTRFS error (device sde): error writing primary super block to device 3
Jul 8 00:00:34 kernel: [97407.272530] BTRFS warning (device sde): lost page write due to IO error on /dev/sdb (-5)
Jul 8 00:00:34 kernel: [97407.285273] BTRFS error (device sde): error writing primary super block to device 3
Jul 8 00:01:06 kernel: [97439.305899] BTRFS error (device sde): bdev /dev/sdb errs: wr 866881, rd 509299, flush 13584, corrupt 0, gen 0
Jul 8 00:01:06 kernel: [97439.324342] BTRFS warning (device sde): lost page write due to IO error on /dev/sdb (-5)
Jul 8 00:01:06 kernel: [97439.324344] BTRFS warning (device sde): lost page write due to IO error on /dev/sdb (-5)
Jul 8 00:01:06 kernel: [97439.324346] BTRFS warning (device sde): lost page write due to IO error on /dev/sdb (-5)
Jul 8 00:01:06 kernel: [97439.357948] BTRFS error (device sde): error writing primary super block to device 3
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: cannot mount after freeze
2021-07-16 11:12 cannot mount after freeze bw
@ 2021-07-16 12:26 ` Qu Wenruo
2021-07-16 13:00 ` Su Yue
2021-07-16 15:13 ` bw
0 siblings, 2 replies; 5+ messages in thread
From: Qu Wenruo @ 2021-07-16 12:26 UTC (permalink / raw)
To: bw, linux-btrfs
On 2021/7/16 下午7:12, bw wrote:
> Hello,
>
> My raid1 with 3 hdd's that contain /home and /data cannot be mounted
> after a freeze/restart on the 14 of juli
>
> My root / (ubuntu 20.10) is on a raid with 2 ssd's so I can boot but I
> always end up in rescue mode atm. When disabling the two mounts (/data
> and /home) in fstab i can log in as root. (had to first change the
> root password via a rescue usb in order to log in)
/dev/sde has corrupted chunk root, which is pretty rare.
[ 8.175417] BTRFS error (device sde): parent transid verify failed on
5028524228608 wanted 1427600 found 1429491
[ 8.175729] BTRFS error (device sde): bad tree block start, want
5028524228608 have 0
[ 8.175771] BTRFS error (device sde): failed to read chunk root
Chunk tree is the very essential tree, handling the logical bytenr ->
physical device mapping.
If it has something wrong, it's a big problem.
But normally, such transid error indicates the HDD or the hardware RAID
controller has something wrong handling barrier/flush command.
Mostly it means the disk or the hardware controller is lying about its
FLUSH command.
You can try "btrfs rescue chunk-recovery" but I doubt the chance of
success, as such transid error never just show up in one tree.
Now let's talk about the other device, /dev/sdb.
This is more straightforward:
[ 3.165790] ata2.00: exception Emask 0x10 SAct 0x10000 SErr 0x680101
action 0x6 frozen
[ 3.165846] ata2.00: irq_stat 0x08000000, interface fatal error
[ 3.165892] ata2: SError: { RecovData UnrecovData 10B8B BadCRC Handshk }
[ 3.165940] ata2.00: failed command: READ FPDMA QUEUED
[ 3.165987] ata2.00: cmd 60/f8:80:08:01:00/00:00:00:00:00/40 tag 16
ncq dma 126976 in
res 40/00:80:08:01:00/00:00:00:00:00/40 Emask
0x10 (ATA bus error)
[ 3.166055] ata2.00: status: { DRDY }
Read command just failed, with hardware reporting internal checksum error.
This definitely means the device is not working properly.
And later we got the even stranger error message:
[ 3.571793] sd 1:0:0:0: [sdb] tag#16 FAILED Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE cmd_age=0s
[ 3.571848] sd 1:0:0:0: [sdb] tag#16 Sense Key : Illegal Request
[current]
[ 3.571895] sd 1:0:0:0: [sdb] tag#16 Add. Sense: Unaligned write command
[ 3.571943] sd 1:0:0:0: [sdb] tag#16 CDB: Read(10) 28 00 00 00 01 08
00 00 f8 00
[ 3.571996] blk_update_request: I/O error, dev sdb, sector 264 op
0x0:(READ) flags 0x80700 phys_seg 30 prio class 0
The disk reports it got some unaligned write, but the block layer says
the operation failed is a READ.
Not sure if the device is really sane.
All these disks are the same model, ST2000DM008, I think it should more
or less indicate there is something wrong in the model...
Recently I have got at least two friends reporting Seagate HDDs have
various problems.
Not sure if they are using the same model.
>
> smartctl seam to say the disks are ok but i'm still unable to mount.
> scrub doesnt see any errors
Well, you already have /dev/sdb report internal checksum error, aka data
corruption inside the disk, and your smartctl is report everything fine.
Then I guess the disk is lying again on the smart info.
(Now I'm more convinced the disk is lying about FLUSH or at least has
something wrong doing FLUSH).
>
> I have installed btrfsmaintanance btw.
>
> Can anyone advice me which steps to take in order to save the data?
> There is no backup (yes I'm a fool but was under the impression that
> with a copy of each file on 2 different disks I'll survive)
For /dev/sdb, I have no idea at all, as we failed to read something from
the disk, it's a completely disk failure.
For /dev/sde, as mentioned, you can try "btrfs rescue chunk-recovery",
and then let "btrfs check" to find out what's wrong.
And I'm pretty sure you won't buy the same disks from Seagate next time.
Thanks,
Qu
>
> Attached all(?) important files + a history of my attempts the past
> days. My attempts from the system rescue usb are not in though.
>
> kind regards,
> Bastiaan
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: cannot mount after freeze
2021-07-16 12:26 ` Qu Wenruo
@ 2021-07-16 13:00 ` Su Yue
2021-07-16 15:13 ` bw
1 sibling, 0 replies; 5+ messages in thread
From: Su Yue @ 2021-07-16 13:00 UTC (permalink / raw)
To: Qu Wenruo; +Cc: bw, linux-btrfs
On Fri 16 Jul 2021 at 20:26, Qu Wenruo <quwenruo.btrfs@gmx.com>
wrote:
> On 2021/7/16 下午7:12, bw wrote:
>> Hello,
>>
>> My raid1 with 3 hdd's that contain /home and /data cannot be
>> mounted
>> after a freeze/restart on the 14 of juli
>>
>> My root / (ubuntu 20.10) is on a raid with 2 ssd's so I can
>> boot but I
>> always end up in rescue mode atm. When disabling the two mounts
>> (/data
>> and /home) in fstab i can log in as root. (had to first change
>> the
>> root password via a rescue usb in order to log in)
>
> /dev/sde has corrupted chunk root, which is pretty rare.
>
> [ 8.175417] BTRFS error (device sde): parent transid verify
> failed on
> 5028524228608 wanted 1427600 found 1429491
> [ 8.175729] BTRFS error (device sde): bad tree block start,
> want
> 5028524228608 have 0
> [ 8.175771] BTRFS error (device sde): failed to read chunk
> root
>
> Chunk tree is the very essential tree, handling the logical
> bytenr ->
> physical device mapping.
>
> If it has something wrong, it's a big problem.
>
> But normally, such transid error indicates the HDD or the
> hardware RAID
> controller has something wrong handling barrier/flush command.
> Mostly it means the disk or the hardware controller is lying
> about its
> FLUSH command.
>
>
> You can try "btrfs rescue chunk-recovery" but I doubt the chance
> of
> success, as such transid error never just show up in one tree.
>
>
> Now let's talk about the other device, /dev/sdb.
>
> This is more straightforward:
>
> [ 3.165790] ata2.00: exception Emask 0x10 SAct 0x10000 SErr
> 0x680101
> action 0x6 frozen
> [ 3.165846] ata2.00: irq_stat 0x08000000, interface fatal
> error
> [ 3.165892] ata2: SError: { RecovData UnrecovData 10B8B
> BadCRC Handshk }
> [ 3.165940] ata2.00: failed command: READ FPDMA QUEUED
> [ 3.165987] ata2.00: cmd 60/f8:80:08:01:00/00:00:00:00:00/40
> tag 16
> ncq dma 126976 in
> res 40/00:80:08:01:00/00:00:00:00:00/40
> Emask
> 0x10 (ATA bus error)
> [ 3.166055] ata2.00: status: { DRDY }
>
> Read command just failed, with hardware reporting internal
> checksum error.
>
> This definitely means the device is not working properly.
>
>
> And later we got the even stranger error message:
>
> [ 3.571793] sd 1:0:0:0: [sdb] tag#16 FAILED Result:
> hostbyte=DID_OK
> driverbyte=DRIVER_SENSE cmd_age=0s
> [ 3.571848] sd 1:0:0:0: [sdb] tag#16 Sense Key : Illegal
> Request
> [current]
> [ 3.571895] sd 1:0:0:0: [sdb] tag#16 Add. Sense: Unaligned
> write command
> [ 3.571943] sd 1:0:0:0: [sdb] tag#16 CDB: Read(10) 28 00 00
> 00 01 08
> 00 00 f8 00
> [ 3.571996] blk_update_request: I/O error, dev sdb, sector
> 264 op
> 0x0:(READ) flags 0x80700 phys_seg 30 prio class 0
>
> The disk reports it got some unaligned write, but the block
> layer says
> the operation failed is a READ.
>
> Not sure if the device is really sane.
>
>
> All these disks are the same model, ST2000DM008, I think it
> should more
> or less indicate there is something wrong in the model...
>
> Recently I have got at least two friends reporting Seagate HDDs
> have
> various problems.
> Not sure if they are using the same model.
>
Just say what I have seen.
Right, the model is ST2000DM008, 2T version. The background is
that
there are three disks in ST2000DM008 model running with xfs on
Dell
OEM machines respectively. I think other hardwares OEM by Dell
should
be stable enough except the suspicious Seagate disks in SMR.
All of the three disks have abnormal error info in their smart
info
after running only 10,000 hours. One disk even has 609 error logs.
--
Su
>>
>> smartctl seam to say the disks are ok but i'm still unable to
>> mount.
>> scrub doesnt see any errors
>
> Well, you already have /dev/sdb report internal checksum error,
> aka data
> corruption inside the disk, and your smartctl is report
> everything fine.
>
> Then I guess the disk is lying again on the smart info.
> (Now I'm more convinced the disk is lying about FLUSH or at
> least has
> something wrong doing FLUSH).
>
>>
>> I have installed btrfsmaintanance btw.
>>
>> Can anyone advice me which steps to take in order to save the
>> data?
>> There is no backup (yes I'm a fool but was under the impression
>> that
>> with a copy of each file on 2 different disks I'll survive)
>
> For /dev/sdb, I have no idea at all, as we failed to read
> something from
> the disk, it's a completely disk failure.
>
> For /dev/sde, as mentioned, you can try "btrfs rescue
> chunk-recovery",
> and then let "btrfs check" to find out what's wrong.
>
> And I'm pretty sure you won't buy the same disks from Seagate
> next time.
>
> Thanks,
> Qu
>>
>> Attached all(?) important files + a history of my attempts the
>> past
>> days. My attempts from the system rescue usb are not in though.
>>
>> kind regards,
>> Bastiaan
>>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: cannot mount after freeze
2021-07-16 12:26 ` Qu Wenruo
2021-07-16 13:00 ` Su Yue
@ 2021-07-16 15:13 ` bw
2021-07-19 13:57 ` Fwd: " bw
1 sibling, 1 reply; 5+ messages in thread
From: bw @ 2021-07-16 15:13 UTC (permalink / raw)
To: Qu Wenruo; +Cc: linux-btrfs
[-- Attachment #1: Type: text/plain, Size: 7024 bytes --]
On Fri, 16 Jul 2021 at 14:26, Qu Wenruo <quwenruo.btrfs@gmx.com> wrote:
>
>
>
> On 2021/7/16 下午7:12, bw wrote:
> > Hello,
> >
> > My raid1 with 3 hdd's that contain /home and /data cannot be mounted
> > after a freeze/restart on the 14 of juli
> >
> > My root / (ubuntu 20.10) is on a raid with 2 ssd's so I can boot but I
> > always end up in rescue mode atm. When disabling the two mounts (/data
> > and /home) in fstab i can log in as root. (had to first change the
> > root password via a rescue usb in order to log in)
>
> /dev/sde has corrupted chunk root, which is pretty rare.
>
> [ 8.175417] BTRFS error (device sde): parent transid verify failed on
> 5028524228608 wanted 1427600 found 1429491
> [ 8.175729] BTRFS error (device sde): bad tree block start, want
> 5028524228608 have 0
> [ 8.175771] BTRFS error (device sde): failed to read chunk root
>
> Chunk tree is the very essential tree, handling the logical bytenr ->
> physical device mapping.
>
> If it has something wrong, it's a big problem.
>
> But normally, such transid error indicates the HDD or the hardware RAID
> controller has something wrong handling barrier/flush command.
> Mostly it means the disk or the hardware controller is lying about its
> FLUSH command.
>
>
> You can try "btrfs rescue chunk-recovery" but I doubt the chance of
> success, as such transid error never just show up in one tree.
For a long time the command was chunk-ing away and had hopes when it
was reporting DONE in two places but then came an error:
~# btrfs rescue chunk-recover /dev/sde
Scanning: DONE in dev0, DONE in dev1, DONE in dev2
parent transid verify failed on 4146261671936 wanted 1427658 found 1439315
parent transid verify failed on 4146261721088 wanted 1427658 found 1439317
parent transid verify failed on 4146236669952 wanted 1427658 found 1439310
parent transid verify failed on 4146174771200 wanted 1427600 found 1439310
parent transid verify failed on 4146258919424 wanted 1427656 found 1439317
parent transid verify failed on 4146238095360 wanted 1427658 found 1439317
parent transid verify failed on 4146260951040 wanted 1427656 found 1439317
parent transid verify failed on 4146266193920 wanted 1427656 found 1439065
parent transid verify failed on 4146067701760 wanted 1427599 found 1439304
parent transid verify failed on 4146246123520 wanted 1427599 found 1439316
parent transid verify failed on 4146246139904 wanted 1427599 found 1439312
parent transid verify failed on 4146246238208 wanted 1427599 found 1439317
parent transid verify failed on 4146246254592 wanted 1427599 found 1439317
parent transid verify failed on 4146246303744 wanted 1427599 found 1439317
parent transid verify failed on 4146246320128 wanted 1427599 found 1439317
parent transid verify failed on 4146246336512 wanted 1427599 found 1439317
parent transid verify failed on 4146246352896 wanted 1427599 found 1438647
parent transid verify failed on 4146246369280 wanted 1427599 found 1439312
parent transid verify failed on 4146237063168 wanted 1427604 found 1439314
parent transid verify failed on 4146236637184 wanted 1427603 found 1439316
parent transid verify failed on 4146260754432 wanted 1427604 found 1439317
parent transid verify failed on 4146246516736 wanted 1427599 found 1439317
parent transid verify failed on 4146246533120 wanted 1427599 found 1439065
parent transid verify failed on 4146268749824 wanted 1427602 found 1439316
parent transid verify failed on 5141904293888 wanted 1419828 found 1439215
parent transid verify failed on 5141904293888 wanted 1419828 found 1439215
parent transid verify failed on 5141904293888 wanted 1419828 found 1439215
Ignoring transid failure
leaf parent key incorrect 5141904293888
ERROR: failed to read block groups: Operation not permitted
open with broken chunk error
Chunk tree recovery failed
... and attached a couple of btrfs checks without doing any dangerous option
>
>
> Now let's talk about the other device, /dev/sdb.
>
> This is more straightforward:
>
> [ 3.165790] ata2.00: exception Emask 0x10 SAct 0x10000 SErr 0x680101
> action 0x6 frozen
> [ 3.165846] ata2.00: irq_stat 0x08000000, interface fatal error
> [ 3.165892] ata2: SError: { RecovData UnrecovData 10B8B BadCRC Handshk }
> [ 3.165940] ata2.00: failed command: READ FPDMA QUEUED
> [ 3.165987] ata2.00: cmd 60/f8:80:08:01:00/00:00:00:00:00/40 tag 16
> ncq dma 126976 in
> res 40/00:80:08:01:00/00:00:00:00:00/40 Emask
> 0x10 (ATA bus error)
> [ 3.166055] ata2.00: status: { DRDY }
>
> Read command just failed, with hardware reporting internal checksum error.
>
> This definitely means the device is not working properly.
>
>
> And later we got the even stranger error message:
>
> [ 3.571793] sd 1:0:0:0: [sdb] tag#16 FAILED Result: hostbyte=DID_OK
> driverbyte=DRIVER_SENSE cmd_age=0s
> [ 3.571848] sd 1:0:0:0: [sdb] tag#16 Sense Key : Illegal Request
> [current]
> [ 3.571895] sd 1:0:0:0: [sdb] tag#16 Add. Sense: Unaligned write command
> [ 3.571943] sd 1:0:0:0: [sdb] tag#16 CDB: Read(10) 28 00 00 00 01 08
> 00 00 f8 00
> [ 3.571996] blk_update_request: I/O error, dev sdb, sector 264 op
> 0x0:(READ) flags 0x80700 phys_seg 30 prio class 0
>
> The disk reports it got some unaligned write, but the block layer says
> the operation failed is a READ.
>
> Not sure if the device is really sane.
>
>
> All these disks are the same model, ST2000DM008, I think it should more
> or less indicate there is something wrong in the model...
>
> Recently I have got at least two friends reporting Seagate HDDs have
> various problems.
> Not sure if they are using the same model.
>
> >
> > smartctl seam to say the disks are ok but i'm still unable to mount.
> > scrub doesnt see any errors
>
> Well, you already have /dev/sdb report internal checksum error, aka data
> corruption inside the disk, and your smartctl is report everything fine.
>
> Then I guess the disk is lying again on the smart info.
> (Now I'm more convinced the disk is lying about FLUSH or at least has
> something wrong doing FLUSH).
>
> >
> > I have installed btrfsmaintanance btw.
> >
> > Can anyone advice me which steps to take in order to save the data?
> > There is no backup (yes I'm a fool but was under the impression that
> > with a copy of each file on 2 different disks I'll survive)
>
> For /dev/sdb, I have no idea at all, as we failed to read something from
> the disk, it's a completely disk failure.
>
> For /dev/sde, as mentioned, you can try "btrfs rescue chunk-recovery",
> and then let "btrfs check" to find out what's wrong.
>
> And I'm pretty sure you won't buy the same disks from Seagate next time.
>
> Thanks,
> Qu
> >
> > Attached all(?) important files + a history of my attempts the past
> > days. My attempts from the system rescue usb are not in though.
> >
> > kind regards,
> > Bastiaan
> >
thx,
Bastiaan
[-- Attachment #2: btrfs_check-Q --]
[-- Type: application/octet-stream, Size: 980 bytes --]
Script started on 2021-07-16 16:58:48+02:00 [TERM="linux" TTY="/dev/tty3" COLUMNS="210" LINES="65"]
Opening filesystem to check...
checksum verify failed on 5028524228608 found 000000B6 wanted 00000000
parent transid verify failed on 5028524228608 wanted 1427600 found 1429491
parent transid verify failed on 5028524228608 wanted 1427600 found 1429491
Ignoring transid failure
checksum verify failed on 5028524261376 found 000000B6 wanted 00000000
checksum verify failed on 5028524277760 found 000000B6 wanted 00000000
parent transid verify failed on 5141904293888 wanted 1419828 found 1439215
parent transid verify failed on 5141904293888 wanted 1419828 found 1439215
parent transid verify failed on 5141904293888 wanted 1419828 found 1439215
Ignoring transid failure
leaf parent key incorrect 5141904293888
ERROR: failed to read block groups: Operation not permitted
ERROR: cannot open file system
Script done on 2021-07-16 16:58:48+02:00 [COMMAND_EXIT_CODE="1"]
[-- Attachment #3: btrfs_check-b --]
[-- Type: application/octet-stream, Size: 980 bytes --]
Script started on 2021-07-16 16:56:10+02:00 [TERM="linux" TTY="/dev/tty3" COLUMNS="210" LINES="65"]
Opening filesystem to check...
checksum verify failed on 5028524228608 found 000000B6 wanted 00000000
parent transid verify failed on 5028524228608 wanted 1427600 found 1429491
parent transid verify failed on 5028524228608 wanted 1427600 found 1429491
Ignoring transid failure
checksum verify failed on 5028524261376 found 000000B6 wanted 00000000
checksum verify failed on 5028524277760 found 000000B6 wanted 00000000
parent transid verify failed on 5141904293888 wanted 1419828 found 1439215
parent transid verify failed on 5141904293888 wanted 1419828 found 1439215
parent transid verify failed on 5141904293888 wanted 1419828 found 1439215
Ignoring transid failure
leaf parent key incorrect 5141904293888
ERROR: failed to read block groups: Operation not permitted
ERROR: cannot open file system
Script done on 2021-07-16 16:56:11+02:00 [COMMAND_EXIT_CODE="1"]
[-- Attachment #4: btrfs_check-data-csum --]
[-- Type: application/octet-stream, Size: 980 bytes --]
Script started on 2021-07-16 16:57:08+02:00 [TERM="linux" TTY="/dev/tty3" COLUMNS="210" LINES="65"]
Opening filesystem to check...
checksum verify failed on 5028524228608 found 000000B6 wanted 00000000
parent transid verify failed on 5028524228608 wanted 1427600 found 1429491
parent transid verify failed on 5028524228608 wanted 1427600 found 1429491
Ignoring transid failure
checksum verify failed on 5028524261376 found 000000B6 wanted 00000000
checksum verify failed on 5028524277760 found 000000B6 wanted 00000000
parent transid verify failed on 5141904293888 wanted 1419828 found 1439215
parent transid verify failed on 5141904293888 wanted 1419828 found 1439215
parent transid verify failed on 5141904293888 wanted 1419828 found 1439215
Ignoring transid failure
leaf parent key incorrect 5141904293888
ERROR: failed to read block groups: Operation not permitted
ERROR: cannot open file system
Script done on 2021-07-16 16:57:09+02:00 [COMMAND_EXIT_CODE="1"]
[-- Attachment #5: btrfs_check-s --]
[-- Type: application/octet-stream, Size: 1018 bytes --]
Script started on 2021-07-16 16:59:46+02:00 [TERM="linux" TTY="/dev/tty3" COLUMNS="210" LINES="65"]
using SB copy 2, bytenr 274877906944
Opening filesystem to check...
checksum verify failed on 5028524228608 found 000000B6 wanted 00000000
parent transid verify failed on 5028524228608 wanted 1427600 found 1429491
parent transid verify failed on 5028524228608 wanted 1427600 found 1429491
Ignoring transid failure
checksum verify failed on 5028524261376 found 000000B6 wanted 00000000
checksum verify failed on 5028524277760 found 000000B6 wanted 00000000
parent transid verify failed on 5141904293888 wanted 1419828 found 1439215
parent transid verify failed on 5141904293888 wanted 1419828 found 1439215
parent transid verify failed on 5141904293888 wanted 1419828 found 1439215
Ignoring transid failure
leaf parent key incorrect 5141904293888
ERROR: failed to read block groups: Operation not permitted
ERROR: cannot open file system
Script done on 2021-07-16 16:59:46+02:00 [COMMAND_EXIT_CODE="1"]
[-- Attachment #6: btrfs_check-r --]
[-- Type: application/octet-stream, Size: 213 bytes --]
Script started on 2021-07-16 16:58:23+02:00 [TERM="linux" TTY="/dev/tty3" COLUMNS="210" LINES="65"]
ERROR: /dev/sde is not a valid numeric value.
Script done on 2021-07-16 16:58:23+02:00 [COMMAND_EXIT_CODE="1"]
^ permalink raw reply [flat|nested] 5+ messages in thread
* Fwd: cannot mount after freeze
2021-07-16 15:13 ` bw
@ 2021-07-19 13:57 ` bw
0 siblings, 0 replies; 5+ messages in thread
From: bw @ 2021-07-19 13:57 UTC (permalink / raw)
To: linux-btrfs
[-- Attachment #1: Type: text/plain, Size: 6925 bytes --]
Hi Qu,
This was the output:
~# btrfs rescue chunk-recover /dev/sde
Scanning: DONE in dev0, DONE in dev1, DONE in dev2
parent transid verify failed on 4146261671936 wanted 1427658 found 1439315
parent transid verify failed on 4146261721088 wanted 1427658 found 1439317
parent transid verify failed on 4146236669952 wanted 1427658 found 1439310
parent transid verify failed on 4146174771200 wanted 1427600 found 1439310
parent transid verify failed on 4146258919424 wanted 1427656 found 1439317
parent transid verify failed on 4146238095360 wanted 1427658 found 1439317
parent transid verify failed on 4146260951040 wanted 1427656 found 1439317
parent transid verify failed on 4146266193920 wanted 1427656 found 1439065
parent transid verify failed on 4146067701760 wanted 1427599 found 1439304
parent transid verify failed on 4146246123520 wanted 1427599 found 1439316
parent transid verify failed on 4146246139904 wanted 1427599 found 1439312
parent transid verify failed on 4146246238208 wanted 1427599 found 1439317
parent transid verify failed on 4146246254592 wanted 1427599 found 1439317
parent transid verify failed on 4146246303744 wanted 1427599 found 1439317
parent transid verify failed on 4146246320128 wanted 1427599 found 1439317
parent transid verify failed on 4146246336512 wanted 1427599 found 1439317
parent transid verify failed on 4146246352896 wanted 1427599 found 1438647
parent transid verify failed on 4146246369280 wanted 1427599 found 1439312
parent transid verify failed on 4146237063168 wanted 1427604 found 1439314
parent transid verify failed on 4146236637184 wanted 1427603 found 1439316
parent transid verify failed on 4146260754432 wanted 1427604 found 1439317
parent transid verify failed on 4146246516736 wanted 1427599 found 1439317
parent transid verify failed on 4146246533120 wanted 1427599 found 1439065
parent transid verify failed on 4146268749824 wanted 1427602 found 1439316
parent transid verify failed on 5141904293888 wanted 1419828 found 1439215
parent transid verify failed on 5141904293888 wanted 1419828 found 1439215
parent transid verify failed on 5141904293888 wanted 1419828 found 1439215
Ignoring transid failure
leaf parent key incorrect 5141904293888
ERROR: failed to read block groups: Operation not permitted
open with broken chunk error
Chunk tree recovery failed
... and attached a couple of btrfs checks without doing any dangerous option
Thanks,
Bastiaan
On Fri, 16 Jul 2021 at 14:26, Qu Wenruo <quwenruo.btrfs@gmx.com> wrote:
>
>
>
> On 2021/7/16 下午7:12, bw wrote:
> > Hello,
> >
> > My raid1 with 3 hdd's that contain /home and /data cannot be mounted
> > after a freeze/restart on the 14 of juli
> >
> > My root / (ubuntu 20.10) is on a raid with 2 ssd's so I can boot but I
> > always end up in rescue mode atm. When disabling the two mounts (/data
> > and /home) in fstab i can log in as root. (had to first change the
> > root password via a rescue usb in order to log in)
>
> /dev/sde has corrupted chunk root, which is pretty rare.
>
> [ 8.175417] BTRFS error (device sde): parent transid verify failed on
> 5028524228608 wanted 1427600 found 1429491
> [ 8.175729] BTRFS error (device sde): bad tree block start, want
> 5028524228608 have 0
> [ 8.175771] BTRFS error (device sde): failed to read chunk root
>
> Chunk tree is the very essential tree, handling the logical bytenr ->
> physical device mapping.
>
> If it has something wrong, it's a big problem.
>
> But normally, such transid error indicates the HDD or the hardware RAID
> controller has something wrong handling barrier/flush command.
> Mostly it means the disk or the hardware controller is lying about its
> FLUSH command.
>
>
> You can try "btrfs rescue chunk-recovery" but I doubt the chance of
> success, as such transid error never just show up in one tree.
>
>
> Now let's talk about the other device, /dev/sdb.
>
> This is more straightforward:
>
> [ 3.165790] ata2.00: exception Emask 0x10 SAct 0x10000 SErr 0x680101
> action 0x6 frozen
> [ 3.165846] ata2.00: irq_stat 0x08000000, interface fatal error
> [ 3.165892] ata2: SError: { RecovData UnrecovData 10B8B BadCRC Handshk }
> [ 3.165940] ata2.00: failed command: READ FPDMA QUEUED
> [ 3.165987] ata2.00: cmd 60/f8:80:08:01:00/00:00:00:00:00/40 tag 16
> ncq dma 126976 in
> res 40/00:80:08:01:00/00:00:00:00:00/40 Emask
> 0x10 (ATA bus error)
> [ 3.166055] ata2.00: status: { DRDY }
>
> Read command just failed, with hardware reporting internal checksum error.
>
> This definitely means the device is not working properly.
>
>
> And later we got the even stranger error message:
>
> [ 3.571793] sd 1:0:0:0: [sdb] tag#16 FAILED Result: hostbyte=DID_OK
> driverbyte=DRIVER_SENSE cmd_age=0s
> [ 3.571848] sd 1:0:0:0: [sdb] tag#16 Sense Key : Illegal Request
> [current]
> [ 3.571895] sd 1:0:0:0: [sdb] tag#16 Add. Sense: Unaligned write command
> [ 3.571943] sd 1:0:0:0: [sdb] tag#16 CDB: Read(10) 28 00 00 00 01 08
> 00 00 f8 00
> [ 3.571996] blk_update_request: I/O error, dev sdb, sector 264 op
> 0x0:(READ) flags 0x80700 phys_seg 30 prio class 0
>
> The disk reports it got some unaligned write, but the block layer says
> the operation failed is a READ.
>
> Not sure if the device is really sane.
>
>
> All these disks are the same model, ST2000DM008, I think it should more
> or less indicate there is something wrong in the model...
>
> Recently I have got at least two friends reporting Seagate HDDs have
> various problems.
> Not sure if they are using the same model.
>
> >
> > smartctl seam to say the disks are ok but i'm still unable to mount.
> > scrub doesnt see any errors
>
> Well, you already have /dev/sdb report internal checksum error, aka data
> corruption inside the disk, and your smartctl is report everything fine.
>
> Then I guess the disk is lying again on the smart info.
> (Now I'm more convinced the disk is lying about FLUSH or at least has
> something wrong doing FLUSH).
>
> >
> > I have installed btrfsmaintanance btw.
> >
> > Can anyone advice me which steps to take in order to save the data?
> > There is no backup (yes I'm a fool but was under the impression that
> > with a copy of each file on 2 different disks I'll survive)
>
> For /dev/sdb, I have no idea at all, as we failed to read something from
> the disk, it's a completely disk failure.
>
> For /dev/sde, as mentioned, you can try "btrfs rescue chunk-recovery",
> and then let "btrfs check" to find out what's wrong.
>
> And I'm pretty sure you won't buy the same disks from Seagate next time.
>
> Thanks,
> Qu
> >
> > Attached all(?) important files + a history of my attempts the past
> > days. My attempts from the system rescue usb are not in though.
> >
> > kind regards,
> > Bastiaan
> >
[-- Attachment #2: btrfs_check-b --]
[-- Type: application/octet-stream, Size: 980 bytes --]
Script started on 2021-07-16 16:56:10+02:00 [TERM="linux" TTY="/dev/tty3" COLUMNS="210" LINES="65"]
Opening filesystem to check...
checksum verify failed on 5028524228608 found 000000B6 wanted 00000000
parent transid verify failed on 5028524228608 wanted 1427600 found 1429491
parent transid verify failed on 5028524228608 wanted 1427600 found 1429491
Ignoring transid failure
checksum verify failed on 5028524261376 found 000000B6 wanted 00000000
checksum verify failed on 5028524277760 found 000000B6 wanted 00000000
parent transid verify failed on 5141904293888 wanted 1419828 found 1439215
parent transid verify failed on 5141904293888 wanted 1419828 found 1439215
parent transid verify failed on 5141904293888 wanted 1419828 found 1439215
Ignoring transid failure
leaf parent key incorrect 5141904293888
ERROR: failed to read block groups: Operation not permitted
ERROR: cannot open file system
Script done on 2021-07-16 16:56:11+02:00 [COMMAND_EXIT_CODE="1"]
[-- Attachment #3: btrfs_check-Q --]
[-- Type: application/octet-stream, Size: 980 bytes --]
Script started on 2021-07-16 16:58:48+02:00 [TERM="linux" TTY="/dev/tty3" COLUMNS="210" LINES="65"]
Opening filesystem to check...
checksum verify failed on 5028524228608 found 000000B6 wanted 00000000
parent transid verify failed on 5028524228608 wanted 1427600 found 1429491
parent transid verify failed on 5028524228608 wanted 1427600 found 1429491
Ignoring transid failure
checksum verify failed on 5028524261376 found 000000B6 wanted 00000000
checksum verify failed on 5028524277760 found 000000B6 wanted 00000000
parent transid verify failed on 5141904293888 wanted 1419828 found 1439215
parent transid verify failed on 5141904293888 wanted 1419828 found 1439215
parent transid verify failed on 5141904293888 wanted 1419828 found 1439215
Ignoring transid failure
leaf parent key incorrect 5141904293888
ERROR: failed to read block groups: Operation not permitted
ERROR: cannot open file system
Script done on 2021-07-16 16:58:48+02:00 [COMMAND_EXIT_CODE="1"]
[-- Attachment #4: btrfs_check-s --]
[-- Type: application/octet-stream, Size: 1018 bytes --]
Script started on 2021-07-16 16:59:46+02:00 [TERM="linux" TTY="/dev/tty3" COLUMNS="210" LINES="65"]
using SB copy 2, bytenr 274877906944
Opening filesystem to check...
checksum verify failed on 5028524228608 found 000000B6 wanted 00000000
parent transid verify failed on 5028524228608 wanted 1427600 found 1429491
parent transid verify failed on 5028524228608 wanted 1427600 found 1429491
Ignoring transid failure
checksum verify failed on 5028524261376 found 000000B6 wanted 00000000
checksum verify failed on 5028524277760 found 000000B6 wanted 00000000
parent transid verify failed on 5141904293888 wanted 1419828 found 1439215
parent transid verify failed on 5141904293888 wanted 1419828 found 1439215
parent transid verify failed on 5141904293888 wanted 1419828 found 1439215
Ignoring transid failure
leaf parent key incorrect 5141904293888
ERROR: failed to read block groups: Operation not permitted
ERROR: cannot open file system
Script done on 2021-07-16 16:59:46+02:00 [COMMAND_EXIT_CODE="1"]
[-- Attachment #5: btrfs_check-r --]
[-- Type: application/octet-stream, Size: 213 bytes --]
Script started on 2021-07-16 16:58:23+02:00 [TERM="linux" TTY="/dev/tty3" COLUMNS="210" LINES="65"]
ERROR: /dev/sde is not a valid numeric value.
Script done on 2021-07-16 16:58:23+02:00 [COMMAND_EXIT_CODE="1"]
[-- Attachment #6: btrfs_check-data-csum --]
[-- Type: application/octet-stream, Size: 980 bytes --]
Script started on 2021-07-16 16:57:08+02:00 [TERM="linux" TTY="/dev/tty3" COLUMNS="210" LINES="65"]
Opening filesystem to check...
checksum verify failed on 5028524228608 found 000000B6 wanted 00000000
parent transid verify failed on 5028524228608 wanted 1427600 found 1429491
parent transid verify failed on 5028524228608 wanted 1427600 found 1429491
Ignoring transid failure
checksum verify failed on 5028524261376 found 000000B6 wanted 00000000
checksum verify failed on 5028524277760 found 000000B6 wanted 00000000
parent transid verify failed on 5141904293888 wanted 1419828 found 1439215
parent transid verify failed on 5141904293888 wanted 1419828 found 1439215
parent transid verify failed on 5141904293888 wanted 1419828 found 1439215
Ignoring transid failure
leaf parent key incorrect 5141904293888
ERROR: failed to read block groups: Operation not permitted
ERROR: cannot open file system
Script done on 2021-07-16 16:57:09+02:00 [COMMAND_EXIT_CODE="1"]
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2021-07-19 13:57 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-07-16 11:12 cannot mount after freeze bw
2021-07-16 12:26 ` Qu Wenruo
2021-07-16 13:00 ` Su Yue
2021-07-16 15:13 ` bw
2021-07-19 13:57 ` Fwd: " bw
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).