[PATCH man-pages] Document encoded I/O

[Omar Sandoval <osandov@osandov.com>]

From: Omar Sandoval <osandov@fb.com>

This adds a new page, rwf_encoded(7), providing an overview of encoded
I/O and updates fcntl(2), open(2), and preadv2(2)/pwritev2(2) to
reference it.

Signed-off-by: Omar Sandoval <osandov@fb.com>
---
 man2/fcntl.2       |  10 +-
 man2/open.2        |  13 ++
 man2/readv.2       |  46 +++++++
 man7/rwf_encoded.7 | 297 +++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 365 insertions(+), 1 deletion(-)
 create mode 100644 man7/rwf_encoded.7

diff --git a/man2/fcntl.2 b/man2/fcntl.2
index fce4f4c2b..76fe9cc6f 100644
--- a/man2/fcntl.2
+++ b/man2/fcntl.2
@@ -222,8 +222,9 @@ On Linux, this command can change only the
 .BR O_ASYNC ,
 .BR O_DIRECT ,
 .BR O_NOATIME ,
+.BR O_NONBLOCK ,
 and
-.B O_NONBLOCK
+.B O_ENCODED
 flags.
 It is not possible to change the
 .BR O_DSYNC
@@ -1803,6 +1804,13 @@ Attempted to clear the
 flag on a file that has the append-only attribute set.
 .TP
 .B EPERM
+Attempted to set the
+.B O_ENCODED
+flag and the calling process did not have the
+.B CAP_SYS_ADMIN
+capability.
+.TP
+.B EPERM
 .I cmd
 was
 .BR F_ADD_SEALS ,
diff --git a/man2/open.2 b/man2/open.2
index b0f485b41..cdd3c549c 100644
--- a/man2/open.2
+++ b/man2/open.2
@@ -421,6 +421,14 @@ was followed by a call to
 .BR fdatasync (2)).
 .IR "See NOTES below" .
 .TP
+.B O_ENCODED
+Open the file with encoded I/O permissions;
+see
+.BR rwf_encoded (7).
+The caller must have the
+.B CAP_SYS_ADMIN
+capabilty.
+.TP
 .B O_EXCL
 Ensure that this call creates the file:
 if this flag is specified in conjunction with
@@ -1168,6 +1176,11 @@ did not match the owner of the file and the caller was not privileged.
 The operation was prevented by a file seal; see
 .BR fcntl (2).
 .TP
+.B EPERM
+The
+.B O_ENCODED
+flag was specified, but the caller was not privileged.
+.TP
 .B EROFS
 .I pathname
 refers to a file on a read-only filesystem and write access was
diff --git a/man2/readv.2 b/man2/readv.2
index af27aa63e..aa60b980a 100644
--- a/man2/readv.2
+++ b/man2/readv.2
@@ -265,6 +265,11 @@ the data is always appended to the end of the file.
 However, if the
 .I offset
 argument is \-1, the current file offset is updated.
+.TP
+.BR RWF_ENCODED " (since Linux 5.6)"
+Read or write encoded (e.g., compressed) data.
+See
+.BR rwf_encoded (7).
 .SH RETURN VALUE
 On success,
 .BR readv (),
@@ -284,6 +289,13 @@ than requested (see
 and
 .BR write (2)).
 .PP
+If
+.B
+RWF_ENCODED
+was specified in
+.IR flags ,
+then the return value is the number of encoded bytes.
+.PP
 On error, \-1 is returned, and \fIerrno\fP is set appropriately.
 .SH ERRORS
 The errors are as given for
@@ -314,6 +326,40 @@ is less than zero or greater than the permitted maximum.
 .TP
 .B EOPNOTSUPP
 An unknown flag is specified in \fIflags\fP.
+.TP
+.B EOPNOTSUPP
+.B RWF_ENCODED
+is specified in
+.I flags
+and the filesystem does not implement encoded I/O.
+.TP
+.B EPERM
+.B RWF_ENCODED
+is specified in
+.I flags
+and the file was not opened with the
+.B O_ENCODED
+flag.
+.PP
+.BR preadv2 ()
+can fail for the following reasons:
+.TP
+.B EFBIG
+.B RWF_ENCODED
+is specified in
+.I flags
+and buffers in
+.I iov
+were not big enough to return the encoded data.
+.PP
+.BR pwritev2 ()
+can fail for the following reasons:
+.TP
+.B EINVAL
+.B RWF_ENCODED
+is specified in
+.I flags
+and the alignment and/or size requirements are not met.
 .SH VERSIONS
 .BR preadv ()
 and
diff --git a/man7/rwf_encoded.7 b/man7/rwf_encoded.7
new file mode 100644
index 000000000..90f5292e2
--- /dev/null
+++ b/man7/rwf_encoded.7
@@ -0,0 +1,297 @@
+.\" Copyright (c) 2019 by Omar Sandoval <osandov@fb.com>
+.\"
+.\" %%%LICENSE_START(VERBATIM)
+.\" Permission is granted to make and distribute verbatim copies of this
+.\" manual provided the copyright notice and this permission notice are
+.\" preserved on all copies.
+.\"
+.\" Permission is granted to copy and distribute modified versions of this
+.\" manual under the conditions for verbatim copying, provided that the
+.\" entire resulting derived work is distributed under the terms of a
+.\" permission notice identical to this one.
+.\"
+.\" Since the Linux kernel and libraries are constantly changing, this
+.\" manual page may be incorrect or out-of-date.  The author(s) assume no
+.\" responsibility for errors or omissions, or for damages resulting from
+.\" the use of the information contained herein.  The author(s) may not
+.\" have taken the same level of care in the production of this manual,
+.\" which is licensed free of charge, as they might when working
+.\" professionally.
+.\"
+.\" Formatted or processed versions of this manual, if unaccompanied by
+.\" the source, must acknowledge the copyright and authors of this work.
+.\" %%%LICENSE_END
+.\"
+.\"
+.TH RWF_ENCODED  7 2019-10-14 "Linux" "Linux Programmer's Manual"
+.SH NAME
+rwf_encoded \- overview of encoded I/O
+.SH DESCRIPTION
+Several filesystems (e.g., Btrfs) support transparent encoding
+(e.g., compression, encryption) of data on disk:
+written data is encoded by the kernel before it is written to disk,
+and read data is decoded before being returned to the user.
+In some cases, it is useful to skip this encoding step.
+For example, the user may want to read the compressed contents of a file
+or write pre-compressed data directly to a file.
+This is referred to as "encoded I/O".
+.SS Encoded I/O API
+Encoded I/O is specified with the
+.B RWF_ENCODED
+flag to
+.BR preadv2 (2)
+and
+.BR pwritev2 (2).
+If
+.B RWF_ENCODED
+is specified, then
+.I iov[0].iov_base
+points to an
+.I
+encoded_iov
+structure, defined in
+.I <linux/fs.h>
+as:
+.PP
+.in +4n
+.EX
+struct encoded_iov {
+    __u64 len;
+    __u64 unencoded_len;
+    __u64 unencoded_offset;
+    __u32 compression;
+    __u32 encryption;
+
+};
+.EE
+.in
+.PP
+.I iov[0].iov_len
+must be set to
+.IR "sizeof(struct\ encoded_iov)" .
+The remaining buffers contain the encoded data.
+.PP
+.I compression
+and
+.I encryption
+are the encoding fields.
+.I compression
+is one of
+.B ENCODED_IOV_COMPRESSION_NONE
+(zero),
+.BR ENCODED_IOV_COMPRESSION_ZLIB ,
+.BR ENCODED_IOV_COMPRESSION_LZO ,
+or
+.BR ENCODED_IOV_COMPRESSION_ZSTD .
+.I encryption
+is currently always
+.B ENCODED_IOV_ENCRYPTION_NONE
+(zero).
+.PP
+.I unencoded_len
+is the length of the unencoded (i.e., decrypted and decompressed) data.
+.I unencoded_offset
+is the offset into the unencoded data where the data in the file begins
+(strictly less than
+.IR unencoded_len ).
+.I len
+is the length of the data in the file.
+.PP
+In most cases,
+.I len
+is equal to
+.I unencoded_len
+and
+.I unencoded_offset
+is zero.
+However, it may be necessary to refer to a subset of the unencoded data,
+usually because a read occurred in the middle of an encoded extent,
+because part of an extent was overwritten or deallocated in some
+way (e.g., with
+.BR write (2),
+.BR truncate (2),
+or
+.BR fallocate (2))
+or because part of an extent was added to the file (e.g., with
+.BR ioctl_ficlonerange (2)
+or
+.BR ioctl_fideduperange (2)).
+For example, if
+.I len
+is 300,
+.I unencoded_len
+is 1000,
+and
+.I unencoded_offset
+is 600,
+then the encoded data is 1000 bytes long when decoded,
+of which only the 300 bytes starting at offset 600 are used;
+the first 600 and last 100 bytes should be ignored.
+.PP
+Additionally,
+.I len
+may be greater than
+.I unencoded_len
+-
+.IR unencoded_offset;
+in this case, the data in the file is longer than the unencoded data,
+and the difference is zero-filled.
+.PP
+If the unencoded data is actually longer than
+.IR unencoded_len ,
+then it is truncated;
+if it is shorter, then it is extended with zeroes.
+.PP
+For
+.BR pwritev2 (),
+the metadata should be specified in
+.IR iov[0] ,
+and the encoded data should be passed in the remaining buffers.
+This returns the number of encoded bytes written (that is, the sum of
+.I iov[n].iov_len
+for 1 <=
+.I n
+<
+.IR iovcnt ;
+partial writes will not occur).
+If the
+.I offset
+argument to
+.BR pwritev2 ()
+is -1, then the file offset is incremented by
+.IR len .
+At least one encoding field must be non-zero.
+Note that the encoded data is not validated when it is written;
+if it is not valid (e.g., it cannot be decompressed),
+then a subsequent read may result in an error.
+.PP
+For
+.BR preadv2 (),
+the metadata is returned in
+.IR iov[0] ,
+and the encoded data is returned in the remaining buffers.
+This returns the number of encoded bytes read.
+Note that a return value of zero does not indicate end of file;
+one should refer to
+.I len
+(for example, a hole in the file has a non-zero
+.I len
+but a zero return value).
+A
+.I len
+of zero indicates end of file.
+If the
+.I offset
+argument to
+.BR preadv2 ()
+is -1, then the file offset is incremented by
+.IR len .
+If the provided buffers are not large enough to return an entire encoded
+extent,
+then this returns -1 and sets
+.I errno
+to
+.BR EFBIG .
+This will only return one encoded extent per call.
+This can also read data which is not encoded;
+all encoding fields will be zero in that case.
+.SS Security
+Encoded I/O creates the potential for some security issues:
+.IP * 3
+Encoded writes allow writing arbitrary data which the kernel will decode on
+a subsequent read. Decompression algorithms are complex and may have bugs
+which can be exploited by malicous data.
+.IP *
+Encoded reads may return data which is not logically present in the file
+(see the discussion of
+.I len
+vs.
+.I unencoded_len
+above).
+It may not be intended for this data to be readable.
+.PP
+Therefore, encoded I/O requires privilege.
+Namely, the
+.B RWF_ENCODED
+flag may only be used when the file was opened with the
+.B O_ENCODED
+flag to
+.BR open (2),
+which requires the
+.B CAP_SYS_ADMIN
+capability.
+.B O_ENCODED
+may be set and cleared with
+.BR fcntl (2).
+Note that it is not cleared on
+.BR fork (2)
+or
+.BR execve (2);
+one may wish to use
+.B O_CLOEXEC
+with
+.BR O_ENCODED .
+.SS Filesystem support
+Encoded I/O is supported on the following filesystems:
+.TP
+Btrfs (since Linux 5.6)
+.IP
+Btrfs supports encoded reads and writes of compressed data.
+The data is encoded as follows:
+.RS
+.IP * 3
+If
+.I compression
+is
+.BR ENCODED_IOV_COMPRESSION_ZLIB ,
+then the encoded data is a single zlib stream.
+.IP *
+If
+.I compression
+is
+.BR ENCODED_IOV_COMPRESSION_LZO ,
+then the encoded data is compressed page by page with LZO1X
+and wrapped in the format described in the Linux kernel source file
+.IR fs/btrfs/lzo.c .
+.IP *
+If
+.I compression
+is
+.BR ENCODED_IOV_COMPRESSION_ZSTD ,
+then the encoded data is a single zstd frame compressed with the
+.I windowLog
+compression parameter set to no more than 17.
+.RE
+.IP
+Additionally, there are some restrictions on
+.BR pwritev2 ():
+.RS
+.IP * 3
+.I offset
+(or the current file offset if
+.I offset
+is -1) must be aligned to the sector size of the filesystem.
+.IP *
+.I len
+must be aligned to the sector size of the filesystem
+unless the data ends at or beyond the current end of the file.
+.IP *
+.I unencoded_len
+and the length of the encoded data must each be no more than 128 KiB.
+This limit may increase in the future.
+.IP *
+The length of the encoded data rounded up to the nearest sector must be
+less than
+.I unencoded_len
+rounded up to the nearest sector.
+.IP *
+Referring to a subset of unencoded data is not yet implemented; i.e.,
+.I len
+must equal
+.I unencoded_len
+and
+.I unencoded_offset
+must be zero.
+.IP *
+Writing compressed inline extents is not yet implemented.
+.RE
-- 
2.23.0