Linux-Can Archive on lore.kernel.org
 help / color / Atom feed
[PATCH v53 1/6] mcp25xxfd: initial driver support
 2020-09-18 17:25 UTC  (7+ messages) - mbox.gz / Atom
` [PATCH v53 1/6] dt-binding: can: mcp25xxfd: document device tree bindings
` [PATCH v53 2/6] can: mcp25xxfd: add regmap infrastructure
` [PATCH v53 3/6] can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN
` [PATCH v53 4/6] can: mcp25xxfd: add listen-only mode
` [PATCH v53 5/6] MAINTAINERS: Add entry for Microchip MCP25XXFD SPI-CAN network driver
` [PATCH v53 6/6] MAINTAINERS: Add reviewer entry for microchip mcp25xxfd "

canfdtest on flexcan loopback
 2020-09-18 12:35 UTC  (13+ messages) - mbox.gz / Atom

[PATCH v2] dt-bindings: net: correct interrupt flags in examples
 2020-09-17 18:55 UTC  - mbox.gz / Atom

MCP25xxFD Driver Error (-47)
 2020-09-17  8:54 UTC  (5+ messages) - mbox.gz / Atom

[PATCH -next] can: ti_hecc: use devm_platform_ioremap_resource_byname
 2020-09-17  6:36 UTC  - mbox.gz / Atom

[PATCH] can: m_can: Set pinmux into "default" state on start
 2020-09-17  1:04 UTC  (4+ messages) - mbox.gz / Atom

[PATCH 0/6] Add support for MCP25XXFD SPI-CAN Network driver
 2020-09-16 13:59 UTC  (11+ messages) - mbox.gz / Atom
` [PATCH 1/6] can: rx-offload: can_rx_offload_add_manual(): add new initialization function
` [PATCH 2/6] dt-bindings: can: mcp25xxfd: document device tree bindings
` [PATCH 3/6] can: mcp25xxfd: add regmap infrastructure
` [PATCH 4/6] can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN
` [PATCH 5/6] can: mcp25xxfd: add listen-only mode
` [PATCH 6/6] MAINTAINERS: Add entry for Microchip MCP25XXFD SPI-CAN network driver

[PATCH] MAINTAINERS: Add reviewer entry for microchip mcp25xxfd SPI-CAN network driver
 2020-09-16 12:17 UTC  (4+ messages) - mbox.gz / Atom

[PATCH] can: mcp25xxfd: Limit spiclk to 0.85*(sysclk/2)
 2020-09-16 10:20 UTC  (2+ messages) - mbox.gz / Atom

[PATCH Resend linux-can-next/testing] can: flexcan: add correctable errors correction when HW supports ECC
 2020-09-16  2:26 UTC  (13+ messages) - mbox.gz / Atom
` [PATCH linux-can-next/flexcan] can: flexcan: fix TDC feature

[RFC]: can-next 2020-09-16
 2020-09-15 22:35 UTC  (38+ messages) - mbox.gz / Atom
` [PATCH 01/37] can: grcan: fix spelling mistake "buss" -> "bus"
` [PATCH 02/37] can: flexcan: fix spelling mistake "reserverd" -> "reserved"
` [PATCH 03/37] can: include: fix spelling mistakes
` [PATCH 04/37] can: net: "
` [PATCH 05/37] can: drivers: "
` [PATCH 06/37] can: raw: fix indention
` [PATCH 07/37] can: slcan: update dead link
` [PATCH 08/37] can: softing: "
` [PATCH 09/37] can: remove "WITH Linux-syscall-note" from SPDX tag of C files
` [PATCH 10/37] can: dev: can_put_echo_skb(): print number of echo_skb that is occupied
` [PATCH 11/37] can: dev: can_put_echo_skb(): propagate error in case of errors
` [PATCH 12/37] can: dev: can_change_state(): print human readable state change messages
` [PATCH 13/37] can: dev: can_bus_off(): print scheduling of restart if activated
` [PATCH 14/37] can: c_can: Remove unused inline function
` [PATCH 15/37] can: mcba_usb: remove redundant initialization of variable err
` [PATCH 16/37] can: mscan: mark expected switch fall-through
` [PATCH 17/37] can: ti_hecc: convert to devm_platform_ioremap_resource_byname()
` [PATCH 18/37] can: peak_usb: convert to use le32_add_cpu()
` [PATCH 19/37] can: peak_canfd: Remove unused macros
` [PATCH 20/37] can: pch_can: use generic power management
` [PATCH 21/37] can: pcan_usb: Document the commands sent to the device
` [PATCH 22/37] can: pcan_usb: add support of rxerr/txerr counters
` [PATCH 23/37] can: spi: Kconfig: remove unneeded dependencies form Kconfig symbols
` [PATCH 24/37] dt-bindings: can: mcp251x: change example interrupt type to IRQ_TYPE_LEVEL_LOW
` [PATCH 25/37] dt-bindings: can: mcp251x: document GPIO support
` [PATCH 26/37] can: mcp251x: sort include files alphabetically
` [PATCH 27/37] can: mcp251x: add GPIO support
` [PATCH 28/37] can: mcp251x: Use readx_poll_timeout() helper
` [PATCH 29/37] can: mcp251x: add support for half duplex controllers
` [PATCH 30/37] can: mscan: mpc5xxx_can: update contact email
` [PATCH 31/37] can: mscan: simplify clock enable/disable
` [PATCH 32/37] can: rx-offload: can_rx_offload_add_manual(): add new initialization function
` [PATCH 33/37] dt-binding: can: mcp25xxfd: document device tree bindings
` [PATCH 34/37] can: mcp25xxfd: add regmap infrastructure
` [PATCH 35/37] can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN
` [PATCH 36/37] can: mcp25xxfd: add listen-only mode
` [PATCH 37/37] MAINTAINERS: Add entry for Microchip MCP25XXFD SPI-CAN network driver

[PATCH] dt-bindings: net: Correct interrupt flags in examples
 2020-09-15 16:54 UTC  (3+ messages) - mbox.gz / Atom

[PATCH] can: m_can: Process interrupt only when not runtime suspended
 2020-09-15 13:47 UTC  - mbox.gz / Atom

[PATCH v3] net: can: Introduce MEN 16Z192-00 CAN controller driver
 2020-09-15  9:12 UTC  (2+ messages) - mbox.gz / Atom

[PATCH net-next] can: kvaser_pciefd: Remove unused macro KVASER_PCIEFD_KCAN_CTRL_EFRAME
 2020-09-15  6:31 UTC  (2+ messages) - mbox.gz / Atom

[PATCH net-next] can: peak_canfd: Remove unused macros
 2020-09-15  6:28 UTC  (2+ messages) - mbox.gz / Atom

[PATCH 0/3] can: xilinx_can: Some minor changes
 2020-09-14  8:49 UTC  (4+ messages) - mbox.gz / Atom
` [PATCH 1/3] can: xilinx_can: Limit CANFD brp to 2
` [PATCH 2/3] can: xilinx_can: Check return value of set_reset_mode
` [PATCH 3/3] can: xilinx_can: Fix incorrect variable and initialize with a default value

[PATCH -next] can: peak_usb: convert to use le32_add_cpu()
 2020-09-14  4:17 UTC  - mbox.gz / Atom

[PATCH net] can: j1939: j1939_sk_bind(): return failure if netdev is down
 2020-09-11  6:50 UTC  (2+ messages) - mbox.gz / Atom

[Spam] We are still waiting for your email
 2020-09-09  8:49 UTC  - mbox.gz / Atom

Questions about using multiple sockets
 2020-09-07 13:07 UTC  (5+ messages) - mbox.gz / Atom

[PATCH] can/peak_usb: fix timestamp wrapping
 2020-09-02 11:43 UTC  (2+ messages) - mbox.gz / Atom
` TR: "

INFO: task can't die in register_netdevice_notifier
 2020-09-01 19:50 UTC  - mbox.gz / Atom

[PATCH 0/1] NET: mcan: Move runtime PM enable/disable to m_can_platform
 2020-09-01 18:22 UTC  (3+ messages) - mbox.gz / Atom
` [PATCH 1/1] "

[PATCH] can: m_can_platform: don't call m_can_class_suspend in runtime suspend
 2020-09-01 18:20 UTC  (3+ messages) - mbox.gz / Atom

[PATCH v2] can: m_can: Set device to software init mode before closing
 2020-09-01 18:18 UTC  (2+ messages) - mbox.gz / Atom

Need help in interpreting ip status output
 2020-08-31 20:59 UTC  - mbox.gz / Atom

[PATCH v41 0/3] can: add mcp25xxfd support
 2020-08-31 10:10 UTC  (5+ messages) - mbox.gz / Atom
    ` [PATCH v41 3/3] can: mcp25xxfd: initial commit

[PATCH 00/20] Add support for [H]SCIF/TMU/CMT/THS/SDHI/MSIOF/CAN[FD]/I2C/IIC/RWDT on R8A774E1
 2020-08-27 17:00 UTC  (5+ messages) - mbox.gz / Atom
` [PATCH 02/20] dt-bindings: thermal: rcar-gen3-thermal: Add r8a774e1 support
` [PATCH 05/20] dt-bindings: timer: renesas,cmt: Document r8a774e1 CMT support

[PATCH v2 0/2] dt-bindings: can: document R8A774E1
 2020-08-27 15:30 UTC  (3+ messages) - mbox.gz / Atom
` [PATCH v2 1/2] dt-bindings: can: rcar_canfd: Document r8a774e1 support
` [PATCH v2 2/2] dt-bindings: can: rcar_can: "

[PATCH v5 0/6] CTU CAN FD open-source IP core SocketCAN driver, PCI, platform integration and documentation
 2020-08-25 15:10 UTC  (11+ messages) - mbox.gz / Atom
` [PATCH v5 1/6] dt-bindings: vendor-prefix: add prefix for the Czech Technical University in Prague
` [PATCH v5 2/6] dt-bindings: net: can: binding for CTU CAN FD open-source IP core
` [PATCH v5 4/6] can: ctucanfd: CTU CAN FD open-source IP core - PCI bus support
` [PATCH v5 5/6] can: ctucanfd: CTU CAN FD open-source IP core - platform/SoC support
    ` [PATCH v5 5/6] can: ctucanfd: CTU CAN FD open-source IP core - platform and next steps and mainlining chances
  ` [PATCH v5 3/6] can: ctucanfd: add support for CTU CAN FD open-source IP core - bus independent part

[PATCH 0/3] r8a7742 add CAN support
 2020-08-25  2:21 UTC  (10+ messages) - mbox.gz / Atom
` [PATCH 1/3] pinctrl: sh-pfc: r8a7790: Add CAN pins, groups and functions
` [PATCH 2/3] dt-bindings: can: rcar_can: Add r8a7742 support
` [PATCH 3/3] ARM: dts: r8a7742: Add CAN support

[PATCH AUTOSEL 5.4 19/38] can: j1939: transport: j1939_xtp_rx_dat_one(): compare own packets to detect corruptions
 2020-08-24 16:37 UTC  - mbox.gz / Atom

[PATCH AUTOSEL 5.7 26/54] can: j1939: transport: j1939_xtp_rx_dat_one(): compare own packets to detect corruptions
 2020-08-24 16:36 UTC  - mbox.gz / Atom

[PATCH AUTOSEL 5.8 29/63] can: j1939: transport: j1939_xtp_rx_dat_one(): compare own packets to detect corruptions
 2020-08-24 16:34 UTC  - mbox.gz / Atom

[PATCH 5.4 070/107] can: j1939: fix kernel-infoleak in j1939_sk_sock2sockaddr_can()
 2020-08-24  8:30 UTC  - mbox.gz / Atom

[PATCH 5.7 070/124] can: j1939: fix kernel-infoleak in j1939_sk_sock2sockaddr_can()
 2020-08-24  8:30 UTC  - mbox.gz / Atom

[PATCH 5.8 084/148] can: j1939: fix kernel-infoleak in j1939_sk_sock2sockaddr_can()
 2020-08-24  8:29 UTC  - mbox.gz / Atom

[PATCH] can: mscan: mpc5xxx_can: update contact email
 2020-08-20 13:07 UTC  (2+ messages) - mbox.gz / Atom

pull-request: can 2020-08-15
 2020-08-16 23:05 UTC  (6+ messages) - mbox.gz / Atom
` [PATCH 1/4] can: j1939: fix support for multipacket broadcast message
` [PATCH 2/4] can: j1939: cancel rxtimer on multipacket broadcast session complete
` [PATCH 3/4] can: j1939: abort multipacket broadcast session when timeout occurs
` [PATCH 4/4] can: j1939: add rxtimer for multipacket broadcast session

pull-request: can 2020-08-14
 2020-08-14 20:58 UTC  (9+ messages) - mbox.gz / Atom
` [PATCH 1/6] can: j1939: fix kernel-infoleak in j1939_sk_sock2sockaddr_can()
` [PATCH 2/6] can: j1939: transport: j1939_simple_recv(): ignore local J1939 messages send not by J1939 stack
` [PATCH 3/6] can: j1939: transport: j1939_session_tx_dat(): fix use-after-free read in j1939_tp_txtimer()
` [PATCH 4/6] can: j1939: socket: j1939_sk_bind(): make sure ml_priv is allocated
` [PATCH 5/6] can: j1939: transport: add j1939_session_skb_find_by_offset() function
` [PATCH 6/6] can: j1939: transport: j1939_xtp_rx_dat_one(): compare own packets to detect corruptions

[PATCH net 0/4] support multipacket broadcast message
 2020-08-14 11:01 UTC  (7+ messages) - mbox.gz / Atom
` [PATCH net 3/4] can: j1939: abort multipacket broadcast session when timeout occurs
` [PATCH net 4/4] can: j1939: add rxtimer for multipacket broadcast session

[PATCH net] can: j1939: fix kernel-infoleak in j1939_sk_sock2sockaddr_can()
 2020-08-13 17:06 UTC  (2+ messages) - mbox.gz / Atom

[PATCH net] can: peak_usb: add range checking in decode operations
 2020-08-13 14:06 UTC  - mbox.gz / Atom

KMSAN: uninit-value in can_receive (2)
 2020-08-13  5:12 UTC  (2+ messages) - mbox.gz / Atom

get rid of the address_space override in setsockopt v2
 2020-08-08 13:54 UTC  (7+ messages) - mbox.gz / Atom
` [PATCH 25/26] net: pass a sockptr_t into ->setsockopt

[PATCH v1 0/5] j1939 fixes
 2020-08-07 10:52 UTC  (6+ messages) - mbox.gz / Atom
` [PATCH v1 1/5] can: j1939: transport: j1939_simple_recv(): ignore local J1939 messages send not by J1939 stack
` [PATCH v1 2/5] can: j1939: transport: j1939_session_tx_dat(): fix use-after-free read in j1939_tp_txtimer()
` [PATCH v1 3/5] can: j1939: socket: j1939_sk_bind(): make sure ml_priv is allocated
` [PATCH v1 4/5] can: j1939: transport: add j1939_session_skb_find_by_offset() function
` [PATCH v1 5/5] can: j1939: transport: j1939_xtp_rx_dat_one(): compare own packets to detect corruptions

[PATCH] can: m_can_platform: restore necessary m_can_class_resume() call
 2020-08-07  1:34 UTC  - mbox.gz / Atom

[PATCH v4 0/6] CTU CAN FD open-source IP core SocketCAN driver, PCI, platform integration and documentation
 2020-08-06 15:53 UTC  (7+ messages) - mbox.gz / Atom
` [PATCH v4 2/6] dt-bindings: net: can: binding for CTU CAN FD open-source IP core

[PATCH] can: grcan: fix spelling mistake "buss" -> "bus"
 2020-08-06 10:56 UTC  - mbox.gz / Atom

page: 

Linux-Can Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-can/0 linux-can/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-can linux-can/ https://lore.kernel.org/linux-can \
		linux-can@vger.kernel.org
	public-inbox-index linux-can

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-can


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git